RC Vehicles

Noise, Smell And Power – The Nitro Khaos Is Here!

For those who believe an RC car should sound as exciting as it looks, the Nitro Khaos brings internal combustion power to the Khaos platform. At its heart sits an SH .21 (3.48cc) pull-start 2-stroke engine, delivering the sound, smell, excitement and hands-on experience that only a nitro-powered RC car can provide.

Factory assembled with the engine and polished aluminium tuned pipe and manifold fitted, Etronix EX4M 2.4GHz radio system installed and aggressive body fully finished, the Nitro Khaos arrives 99% Ready-To-Run. Add your transmitter batteries, nitro fuel, fuel bottle and glow starter and you'll soon have the Khaos fired up and leaving its distinctive vapour trail in its wake.

Beneath the body, a tough 3mm 6061/T6 aluminium main chassis provides the foundation for a rugged 4WD shaft-driven transmission. Front and rear geared differentials feature metal gears, while metal crown and pinion gears, front and rear universal CVA driveshafts and 12mm aluminium wheel hexes help transfer the engine's power to the ground. Front and rear centre chassis braces add further support, while the unique gearbox layout is designed to keep the centre of gravity low.

A 3-shoe clutch provides smooth engagement as the revs rise, with the polished aluminium tuned pipe and manifold helping the SH .21 deliver its characteristic nitro power band. A generous 125cc fuel tank provides longer running between refills, while dual disc brakes provide the stopping power when it's time to rein the Khaos back in.

The balanced chassis layout positions the engine and fuel tank opposite the enclosed receiver box and aluminium servo tray, with an Etronix 9kg metal-geared waterproof steering servo providing strong and dependable steering control.

Long-travel suspension and adjustable big-bore oil-filled shock absorbers give the Nitro Khaos plenty of ability when the terrain gets rough. Lightweight high-impact suspension arms are joined by aluminium front and rear suspension mounts, while adjustable upper suspension and steering turnbuckles allow the set-up to be fine-tuned to suit the conditions.

There's plenty of adjustability built into the chassis too, including droop, camber, toe-in and wheelbase, while full ball bearings throughout help keep the drivetrain running freely. The high-impact front bumper is even ready to accept an optional LED light set for those who want to add another dimension to their Khaos.

If you're a fan of real engines and the noise, smell, tuning and mechanical involvement that comes with them, the Nitro Khaos is calling.

Features

• 99% Ready-To-Run.
• Etronix EX4M 4ch 2.4ghz Radio.
• Etronix 9KG MG Waterproof Steering Servo.
• SH.21 (3.48CC) Size Pull Start Engine.
• Polished aluminium tuned pipe and manifold.
• 3-Shoe clutch.
• 125cc fuel tank.
• Dual disc brakes.
• Front and rear geared differentials with metal gears.
• Blue anodised 6061/T6 aluminium 3mm main chassis.
• Blue anodised aluminium servo tray.
• Blue anodised front and rear alloy suspension mounts.
• 4WD shaft drive.
• Front and rear centre chassis braces.
• Unique gearbox design for low CG.
• Lightweight high impact arms.
• Big bore oil filled adjustable shocks.
• Gearbox metal crown & pinion gear.
• Front and rear universal CVA driveshafts.
• Adjustable upper link turnbuckles.
• Fully adjustable suspension including, droop, camber, toe-in, wheelbase etc.
• Receiver Box.
• Aggressive Body Styling.
• Full Ball Bearings.
• Wide range of option parts available.

Required To Complete

• 4 x AA Batteries
• Nitro Fuel
• Fuel Bottle
• Glowplug Starter

Specification

Length: 485mm
Width: 340 mm
Height: 175mm
Wheelbase: 325mm
Tyres: Φ120x70mm
Gear Ratio: 9.7:1
Weight: 3000g

Noise, Smell And Power – The Nitro Khaos Is Here!

For those who believe an RC car should sound as exciting as it looks, the Nitro Khaos brings internal combustion power to the Khaos platform. At its heart sits an SH .21 (3.48cc) pull-start 2-stroke engine, delivering the sound, smell, excitement and hands-on experience that only a nitro-powered RC car can provide.

Factory assembled with the engine and polished aluminium tuned pipe and manifold fitted, Etronix EX4M 2.4GHz radio system installed and aggressive body fully finished, the Nitro Khaos arrives 99% Ready-To-Run. Add your transmitter batteries, nitro fuel, fuel bottle and glow starter and you'll soon have the Khaos fired up and leaving its distinctive vapour trail in its wake.

Beneath the body, a tough 3mm 6061/T6 aluminium main chassis provides the foundation for a rugged 4WD shaft-driven transmission. Front and rear geared differentials feature metal gears, while metal crown and pinion gears, front and rear universal CVA driveshafts and 12mm aluminium wheel hexes help transfer the engine's power to the ground. Front and rear centre chassis braces add further support, while the unique gearbox layout is designed to keep the centre of gravity low.

A 3-shoe clutch provides smooth engagement as the revs rise, with the polished aluminium tuned pipe and manifold helping the SH .21 deliver its characteristic nitro power band. A generous 125cc fuel tank provides longer running between refills, while dual disc brakes provide the stopping power when it's time to rein the Khaos back in.

The balanced chassis layout positions the engine and fuel tank opposite the enclosed receiver box and aluminium servo tray, with an Etronix 9kg metal-geared waterproof steering servo providing strong and dependable steering control.

Long-travel suspension and adjustable big-bore oil-filled shock absorbers give the Nitro Khaos plenty of ability when the terrain gets rough. Lightweight high-impact suspension arms are joined by aluminium front and rear suspension mounts, while adjustable upper suspension and steering turnbuckles allow the set-up to be fine-tuned to suit the conditions.

There's plenty of adjustability built into the chassis too, including droop, camber, toe-in and wheelbase, while full ball bearings throughout help keep the drivetrain running freely. The high-impact front bumper is even ready to accept an optional LED light set for those who want to add another dimension to their Khaos.

If you're a fan of real engines and the noise, smell, tuning and mechanical involvement that comes with them, the Nitro Khaos is calling.

Features

• 99% Ready-To-Run.
• Etronix EX4M 4ch 2.4ghz Radio.
• Etronix 9KG MG Waterproof Steering Servo.
• SH.21 (3.48CC) Size Pull Start Engine.
• Polished aluminium tuned pipe and manifold.
• 3-Shoe clutch.
• 125cc fuel tank.
• Dual disc brakes.
• Front and rear geared differentials with metal gears.
• Blue anodised 6061/T6 aluminium 3mm main chassis.
• Blue anodised aluminium servo tray.
• Blue anodised front and rear alloy suspension mounts.
• 4WD shaft drive.
• Front and rear centre chassis braces.
• Unique gearbox design for low CG.
• Lightweight high impact arms.
• Big bore oil filled adjustable shocks.
• Gearbox metal crown & pinion gear.
• Front and rear universal CVA driveshafts.
• Adjustable upper link turnbuckles.
• Fully adjustable suspension including, droop, camber, toe-in, wheelbase etc.
• Receiver Box.
• Aggressive Body Styling.
• Full Ball Bearings.
• Wide range of option parts available.

Required To Complete

• 4 x AA Batteries
• Nitro Fuel
• Fuel Bottle
• Glowplug Starter

Specification

Length: 485mm
Width: 340 mm
Height: 175mm
Wheelbase: 325mm
Tyres: Φ120x70mm
Gear Ratio: 9.7:1
Weight: 3000g

Get Set for some mayhem and madness with the Khaos, the latest 3S LiPo brushless-powered off-road truggy from FTX.

Blending affordability, specification and tunability, the Khaos is perfect for anyone stepping up from brushed models or wanting more performance beyond a regular 2S truck. With an oversized footprint, the Khaos is larger than a traditional 1:10 scale vehicle and features the latest Etronix 80A brushless speed control and 3665 2100Kv motor. Paired with a 3S 3300mAh LiPo battery, straight-line speeds are exciting while remaining controllable and easy to drive.
With the inclusion of the latest compact Etronix EX4M radio, a 9kg-rated metal-geared steering servo, balance charger and Voltz LiPo charge-safe sack, you have a high-spec package ready to go straight out of the box.

Front, rear and centre geared differentials with metal gears provide smooth power transfer through front and rear universal driveshafts, finished with aluminium wheel hexes. A heavy-duty moulded tub chassis houses all components, while the updated geometry rear shock tower supports new heavy-duty body mounts.
Oil-filled shock absorbers are configured to soak up the terrain at each corner, while aluminium suspension hanger mounts secure the double wishbone suspension.
Khaos by name chaos by nature, this brushless supersized 1:10 truggy is ready to deliver thrills and spills in abundance.

Features

• 99% Ready-To-Run.
• Etronix EX4M 4ch 2.4ghz Radio.
• Etronix Photon Waterproof 80A Brushless ESC.
• Etronix Photon 3665 2100kv Brushless Motor.
• Etronix 9KG MG Waterproof Steering Servo.
• Etronix PowerPal Balance Charger.
• Voltz 3300mAh 3S LiPo Battery.
• Voltz LiPo Charge Sack.
• Front, rear and centre geared differentials with metal gears.
• Moulded tub chassis.
• Aluminium upper plate.
• 4WD shaft drive.
• Unique gearbox design for low CG.
• Lightweight high impact arms.
• Big bore oil filled adjustable shocks.
• Gearbox metal crown & pinion gear.
• Front and rear universal driveshafts.
• Adjustable wheelbase.
• Adjustable turnbuckles.
• Fully adjustable suspension including, droop, camber, toe-in, wheelbase etc.
• Front and Rear Alloy Suspension Mounts.
• Receiver Box.
• Aggressive Body Styling.
• Full Ball Bearings.
• Wide range of option parts available.

Mountain Rescue teams around the world risk life and limb to help others. Whether it’s in the mountains of the UK such as Snowdonia, Brecon or the Scottish Highlands or trails in the Alps and Pyrenees these predominantly volunteer teams are ready for a distress call for help.

FTX’s new Mountain Rescue edition Kanyon looks to capture the go anywhere mindset of rescue teams by including some new features over the standard Kanyon. A switchable 2-speed gearbox provides high and low speeds to help navigate rough and smooth terrain, whilst a front bumper mounted winch can be operated from the transmitter to haul you out of trouble.

The iconic Kanyon body comes finished in a new mountain rescue inspired livery and a radio antenna is included for when you must contact base camp on the walkie-talkie.

A 35T brushed motor provides the torque, while the same metal output gears, locked axles and multi-link suspension produce the drive you need to pretty much scale over most obstacles.

With a moulded roof rack ready for you to load with scale rescue accessories, you don’t need to waste too much time before you are ready for your first emergency call out!

Features

• 99% Ready-To-Run
• Etronix 2.4ghz radio
• Etronix 9Kg waterproof steering servo
• 60Amp Waterproof brushed crawler ESC
• 35T High torque brushed motor
• Voltz 1800mAh NiMH 7.2v Battery
• USB 600mA charger
• Receiver box
• Switchable 2-speed gearbox
• Front and rear straight locked axles
• Link suspension for maximum articulation
• Telescopic sliding centre driveshafts
• Front CVA steering universal driveshafts
• Centre compact 3-gear transmission
• Front, centre & rear diff lockers
• Metal output, crown and diff gears
• Oil filled adjustable shock absorbers
• Aluminium front/rear bumper & body mounts
• Scale inspired rescue style bodyshell
• Moulded fenders, roof rack & light bar
• Front and rear moulded bumpers
• Working front bumper winch
• Scale styled wheels w/super soft block tyres
• 13 Factory fitted LED lights

Specifications

Length: 580mm (bumper to bumper)
Width: 320mm (outside tyre to tyre)
Height: 305mm (to top of roof rack)

Declaration of Conformity

FTX5563 Declaration of Conformity

Enjoy the thrill of high speed off road with the latest Zorro Brushless Trophy Truck. Using an all new Etronix 80A 2S/3S rated brushless speed control and 3665 sized brushless motor the Zorro is ready fill your fix for high speed jinx.

Using an all new heavy duty moulded chassis platform, the Zorro BL uses a 3 geared-diff drivetrain as used on larger 1/8th models to deliver the drive, resulting in more evenly distribututed power and a more drivable truck.

The Zorro BL comes standard with front and rear cast alloy suspension mounts for extra durabilit, along with shock absorbing tubular bumpers and skid plates. Adjustable suspension with anti-roll bars and oil filled shocks mean you can fine tune your truck to suit your terrain and driving style.

The semi-scale Trophy Truck inspired bodyshell features a internal moulded rollcage, cockpit with driver figures and a full function spare tyre. With Etronix’s latest 4channel radio, 9kg metal geared waterproof steering servo and Voltz 3200mAH 2S Lipo & charge sack the Zorro BL is truly ready to go when you are!

Features

• 99% Ready-To-Run
• Etronix EX4P 4ch 2.4ghz Radio
• Etronix Photon Waterproof 80A Brushless ESC
• Etronix Photon 3665 Brushless Motor
• Etronix Waterproof 9kg MG Steering Servo
• Etronix PowerPal Balance Charger
• Voltz 3200mAh 2S LiPo Battery
• Voltz LiPo Charge Sack
• Front, rear and centre geared differentials
• Moulded tub chassis
• 4wd shaft drive
• Unique gearbox design for low CG
• Lightweight high impact arms
• Big bore oil filled adjustable shocks
• Gearbox metal crown & pinion gear
• Front universal driveshafts
• Adjustable wheelbase
• Adjustable turnbuckles
• Fully adjustable suspension including,
• Trophy Truck Body Styling
• Internal Roll Cage and Driver Cockpit
• Front & Rear Tubular Bumpers w/Skid Plates
• Front and Rear Alloy Suspension Mounts
• Front and Rear Anti-Roll Bars
• Receiver Box
• Full Ball Bearings
• Wide range of option parts available

Specifications

Length: 510mm
Width: 295mm
Height: 195mm
Wheelbase: 320mm
Weight: 2.8kg

Declaration of Conformity

• Declaration of Conformity for FTX5557WO

Mixing classic desert trophy truck finish with a .18 pull start nitro engine, the FTX Zorro is the perfect blend of speed, noise and semi-scale realism.

Factory assembled with waterproof servos and a 2.4ghz radio system, the Zorro’s shaft 4wd drivetrain, along with metal geared front and rear differentials is ready to handle the excitement that only a nitro engine can deliver.

Front and rear fully independant suspension features oil filled shock absorbers, adjustable turnbuckles and anti-roll bars for fine tuning. Flexible front and rear wide tubular style bumpers and skid plates protect, while the pre-printed bodyshell covers an internal roll cage and driver cockpit.

Mounted to a 3mm anodised aluminium chassis, the Force .18 pull start engine fitted with a 3-shoe clutch and 2-piece composite tuned pipe deliv- ers great power and performance making it the ideal choice for anyone looking to sample some nitro r/c.

Get ready to fuel up and start your engines!

Features

• Etronix 2.4ghz 3ch radio
• Semi-scale Trophy Truck bodyshell
• Internal roll cage and driver interior
• Scale styled wheels and tyres
• Waterproof 3kg steering and throttle servo
• FORCE .18 pull start nitro engine
• Composite 2-piece tuned pipe
• 3-shoe clutch
• Blue anodised aluminium chassis parts
• Front and rear chassis braces
• 4wd shaft drive
• Unique gearbox design for low CG
• Radio box
• Lightweight high impact arms
• Big bore oil filled adjustable shock absorbers
• Gearbox metal crown & pinion gear
• Front and rear geared differentials
• Front universal driveshafts
• Adjustable turnbuckles
• Fully adjustable suspension including, droop, camber, toe-in, wheelbase etc
• Front & Rear Tubular bumpers and skid plates

Specifications

Length: 510mm
Width: 295mm
Height: 195mm
Wheelbase: 329mm

Required to Complete

• 12 x AA Batteries, Fuel, Fuel Bottle and Glow Starter

Declaration of Conformity

FTX5542O Declaration of Conformity

The awesome FTX Carnage gets the nitro treatment! Packed full of the many of the same features, that made its electric counterpart so successful, the Carnage NT fills the needs of RC racers who like it dirty and noisy.

Features

• Etronix 2.4ghz crystal free radio
• Race designed low profile pre-painted bodyshell
• 3kg steering and throttle servo with heatsink body
• VX Engine .18 pull start nitro engine
• Composite 2-piece tuned pipe
• 3-shoe clutch
• Blue anodised aluminium chassis parts
• Front and rear chassis braces
• 4wd shaft drive
• Unique gearbox design for low CG
• Radio box
• Lightweight high impact arms
• Big bore oil filled adjustable shocks
• Gearbox metal crown & pinion gear
• Front and rear geared differentials
• Front universal driveshafts
• Adjustable wheelbase
• Adjustable turnbuckles
• Fully adjustable suspension including, droop, camber, toe-in, wheelbase etc

Specifications

Length: 415mm
Width: 326mm
Height: 156mm
Wheelbase: 290/295mm

Required to complete

• 12 x AA Batteries, Fuel, Fuel Bottle and Glow Starter

Engine Revision July 2026

The model now features a VX.18 engine (replaced the SH.18).
Please confirm your engine crankcase code before ordering a replacement engine or spare parts.

Declaration of Conformity

FTX5540 Declaration of Conformity

A long-standing favourite within the FTX range, the Carnage Brushless 2.0 is an ideal start up into lipo powered, brushless motor off road fun!

Featuring new body graphics, the 2.0 now comes standard with an updated Etronix Photon 50A brushless speed control providing improved feel and control. The latest 4ch Etronix Pulse radio with antenna less receiver is now mounted as standard. The same Photon 2950kv brushless motor and Voltz 2S 3250mAh Lipo battery complete the power package.

A new, updated front bumper with six mounted LED lights also provides additional strength and bracing to the front of the chassis. Big bore oil filled shock absorbers and double wishbone suspension look after each corner, while front and rear differentials with metal bevel, crown and pinion output gears handle the brushless power.

Furthermore, this all round package can be upgraded with a wide selection of aftermarket option parts to bring your ride to the next level!

Features

• 99% Ready-to-run
• Etronix Pulse 4ch 2.4ghz Radio System
• Etronix Photon KV2950 Brushless Motor
• Etronix Photon 3.0 50A Brushless Speed Control
• Etronix Waterproof 3kg Steering Servo
• Etronix LiPo Balance Charger
• Voltz 2S 3250mAH LiPo Battery
• Voltz LiPo Charge Sack
• Big bore oil filled adjustable shock absorbers
• Gearbox metal crown & pinion gear
• Front and rear geared differentials
• Front universal CVA driveshafts
• Adjustable turnbuckles
• Fully adjustable suspension including, droop, camber, toe-in, wheelbase etc
• Slipper for drivetrain damage protection
• Moulded tub chassis
• 4wd shaft drive
• Unique gearbox design for low CG
• Lightweight high impact arms
• Wide range of option parts available

Specifications

Length: 415mm
Width: 328mm
Height: 156mm
Wheelbase: 290/295mm
Tyre: ø 120 x 60mm
Gear Ratio: 11.2:1

Declaration of Conformity

FTX5539 Declaration of Conformity

Since it’s release over six years ago the FTX Carnage has become a huge favourite with beginners looking for an affordable entry into the world of R/C. Well we thought it was about time this fan favorite had a face lift with the Carnage 2.0. Two new bodyshell schemes and colours, chrome plated wheels, Etronix 3ch radio and a new 60amp rated brushed esc means the Carnage legacy is set to continue for a long time to come!

Features

• 2.4Ghz Etronix Radio
• 60A waterproof ESC for NiMh/LiPo
• 550 brushed motor
• Waterproof 3kg steering servo
• Voltz 1800mAh 7.2v NiMH battery
• Wall charger for battery
• New Red Graphic Truck Body
• Moulded tub chassis
• 4wd shaft drive with slipper system
• Unique gearbox design for low CG
• Lightweight high impact arms
• Big bore oil filled adjustable shocks
• Gearbox metal crown & pinion gear
• Front universal driveshafts
• Adjustable wheelbase
• Adjustable turnbuckles
• Fully adjustable suspension including, droop, camber, toe-in, wheelbase etc
• Slipper for drivetrain damage protection
• Chassis accepts NiMh or LiPo battery
• Chrome plated wheels & block tyres

Specifications

Length: 415mm
Width: 328mm
Height: 156mm
Wheelbase: 290/295mm
Tyre: ø 120 x 60mm
Gear Ratio: 11.2:1

Declaration of Conformity

FTX5537R Declaration of Conformity

Since it’s release over six years ago the FTX Carnage has become a huge favourite with beginners looking for an affordable entry into the world of R/C. Well we thought it was about time this fan favorite had a face lift with the Carnage 2.0. Two new bodyshell schemes and colours, chrome plated wheels, Etronix 3ch radio and a new 60amp rated brushed esc means the Carnage legacy is set to continue for a long time to come!

Features

• 2.4Ghz Etronix Radio
• 60A waterproof ESC for NiMh/LiPo
• 550 brushed motor
• Waterproof 3kg steering servo
• Voltz 1800mAh 7.2v NiMH battery
• Wall charger for battery
• New Blue Graphic Truck Body
• Moulded tub chassis
• 4wd shaft drive with slipper system
• Unique gearbox design for low CG
• Lightweight high impact arms
• Big bore oil filled adjustable shocks
• Gearbox metal crown & pinion gear
• Front universal driveshafts
• Adjustable wheelbase
• Adjustable turnbuckles
• Fully adjustable suspension including, droop, camber, toe-in, wheelbase etc
• Slipper for drivetrain damage protection
• Chassis accepts NiMh or LiPo battery
• Chrome plated wheels & block tyres

Specifications

Length: 415mm
Width: 328mm
Height: 156mm
Wheelbase: 290/295mm
Tyre: ø 120 x 60mm
Gear Ratio: 11.2:1

Declaration of Conformity

FTX5537B Declaration of Conformity

The Banzai has been a real favourite with fans of on road for years and now you can enjoy some added realism with the introduction of the new, Banzai Nitro!

Nothing quite matches the realism of a fuel powered nitro 2-stroke engine to bring an r/c car to life, and now you can hit the streets and car parks with the Banzai and replicate some real street racing!

Using the same, established chassis platform as the nitro Carnage, the Banzai Nitro features an aluminium main chassis, with a centrally mounted engine and 4wd shaft driven drive line. A composite 2-piece tuned pipe and 3-shoe clutch come as standard with 1-piece polished aluminium and 2-speed automatic gearbox two notable options.

Metal crown, pinion and bevel differential gears provide excellent durability, while adjustable big bore, oil filled shocks feature multiple tuning options for you to dial in the traction and handling.

Scale spoked wheels with cut-slick rubber treaded tyres provide good traction on most surfaces, while two new Banzai body colour schemes in addition to the electric red and green, mean you can get together with friends for an old school petrol head meet up!

Features

• 95% Ready-to-Run
• Etronix 2.4ghz Radio System
• Waterproof 3kg Servos
• FORCE .18 pull start nitro engine
• Composite 2-piece tuned pipe
• 3-shoe clutch
• Blue anodised aluminium chassis parts
• Front and rear chassis braces
• 4wd shaft drive
• Unique gearbox design for low CG
• Radio box
• Lightweight high impact arms
• Big bore oil filled adjustable shocks
• Gearbox metal crown & pinion gear
• Front and rear geared differentials
• Front universal CVA driveshafts
• Adjustable turnbuckles
• Adjustable Wheelbase
• Fully adjustable suspension including,droop, camber, toe-in, wheelbase etc
• Foam front bumper
• Scale spoked wheels & treaded tyres

Declaration of Conformity

• FTX5534W Declaration of Conformity

The Banzai has been a real favourite with fans of on road for years and now you can enjoy some added realism with the introduction of the new, Banzai Nitro!

Nothing quite matches the realism of a fuel powered nitro 2-stroke engine to bring an r/c car to life, and now you can hit the streets and car parks with the Banzai and replicate some real street racing!

Using the same, established chassis platform as the nitro Carnage, the Banzai Nitro features an aluminium main chassis, with a centrally mounted engine and 4wd shaft driven drive line. A composite 2-piece tuned pipe and 3-shoe clutch come as standard with 1-piece polished aluminium and 2-speed automatic gearbox two notable options.

Metal crown, pinion and bevel differential gears provide excellent durability, while adjustable big bore, oil filled shocks feature multiple tuning options for you to dial in the traction and handling.

Scale spoked wheels with cut-slick rubber treaded tyres provide good traction on most surfaces, while two new Banzai body colour schemes in addition to the electric red and green, mean you can get together with friends for an old school petrol head meet up!

Features

• 95% Ready-to-Run
• Etronix 2.4ghz Radio System
• Waterproof 3kg Servos
• FORCE .18 pull start nitro engine
• Composite 2-piece tuned pipe
• 3-shoe clutch
• Blue anodised aluminium chassis parts
• Front and rear chassis braces
• 4wd shaft drive
• Unique gearbox design for low CG
• Radio box
• Lightweight high impact arms
• Big bore oil filled adjustable shocks
• Gearbox metal crown & pinion gear
• Front and rear geared differentials
• Front universal CVA driveshafts
• Adjustable turnbuckles
• Adjustable Wheelbase
• Fully adjustable suspension including,droop, camber, toe-in, wheelbase etc
• Foam front bumper
• Scale spoked wheels & treaded tyres

Declaration of Conformity

• FTX5534B Declaration of Conformity

Classic beetle style and brawn fuse together with the FTX Bugsta, the latest heavy-duty 4wd off road vehicle from FTX. Using the same chassis platform as the hugely popular Carnage Truggy, the Bugsta captures best of buggies and trucks, with a bit of monster thrown in for good measure!

The 4wd shaft drivetrain features metal diff gears and front universal driveshafts, while an integrated slipper helps protect the drivetrain from possible damage under power. With adjustable turnbuckles all round and large bore oil filled shock absorbers the Bugsta can be tuned to suit you or the surface.

Control is via an Etronix 2.4ghz EX2 radio system, with power being provided via a brushed 550 motor, electronic speed control and a Voltz 1800mah NiMH battery, with steering being handled by a waterproof 3kg metal geared steering servo.

Want an r/c vehicle that is as much fun as it looks then the FTX Bugsta is the ride for you!

Features

• 99% Ready to run
• Etronix EX2 Sport 2.4ghz radio
• Waterproof speed control
• 550 Brushed motor
• USB charger
• Etronix 3kg metal geared waterproof steering servo
• Voltz 1800mAh NiMH Battery
• Pre-painted Beetle style bodyshell
• Moulded tub chassis
• 4wd shaft drive with slipper system
• Unique gearbox design for low CG
• Lightweight high impact arms
• Big bore oil filled adjustable shocks
• Gearbox metal crown & pinion gear
• Front universal driveshafts
• Adjustable wheelbase
• Adjustable turnbuckles
• Fully adjustable suspension including, droop, camber, toe-in, wheelbase etc
• Slipper for drivetrain damage protection
• Chassis accepts NiMh or LiPo battery
• Wide range of option parts available

Specifications

Length: 415mm
Width: 328mm
Height: 156mm
Wheelbase: 290/295mm
Tyre: ø 125 x 60mm
Gear Ratio: 11.2:1

Required to complete

• 8 x AA Batteries

Declaration of Conformity

FTX5530 Declaration of Conformity

Take to the streets with FTX’s new Banzai drift chassis. Modeled around the hugely popular FTX Vantage and Carnage platform, the Banzai brings Japanese drift styling to the entry level Ready-To-Run arena.

Featuring a 4wd shaft driven design with front and rear metal-geared differentials, the Banzai is 99% complete from the box. Blue anodized aluminium components add a little style to the chassis along with the functionality of oil filled adjustable shock absorbers, front CVA universal driveshafts, ball bearings, adjustable suspension turnbuckles for tuning and a centre drive slipper to protect the transmission.

A waterproof electronic speed control, servo and receiver allow for use in a wide range of conditions and the 2.4ghz radio provides interference free signal no matter where you are.

Topped off and finished with an S15 style pre-printed drift body and a hard compound drift tyre on scale finish wheels, the Banzai is the perfect introduction to sideways street action!

Features

• RTR with Etronix 2.4ghz Radio System
• Waterproof receiver
• Waterproof brushed motor speed control
• Waterproof steering servo
• 550 brushed motor
• Voltz 1800mah 7.2v NiMh battery
• USB charger for battery
• Moulded tub chassis
• 4wd shaft drive with slipper system
• Big bore oil filled adjustable shocks
• Gearbox metal crown and pinion gear
• Front universal driveshafts
• Adjustable turnbuckles
• Adjustable suspension(droop, camber, toe-in & wheelbase)
• Foam front bumper
• Scale finished wheels
• Drift tyres

Specifications

Length: 440mm
Width: 195mm Height: 130mm
Wheelbase: 255mm - 256mm
Front Tyre: 24 x 60mm
Rear Tyre: 24 x 60mm
Gear Ratio: 6.5:1

Declaration of Conformity

FTX5529G Declaration of Conformity

Take to the streets with FTX’s new Banzai drift chassis. Modeled around the hugely popular FTX Vantage and Carnage platform, the Banzai brings Japanese drift styling to the entry level Ready-To-Run arena.

Featuring a 4wd shaft driven design with front and rear metal-geared differentials, the Banzai is 99% complete from the box. Blue anodized aluminium components add a little style to the chassis along with the functionality of oil filled adjustable shock absorbers, front CVA universal driveshafts, ball bearings, adjustable suspension turnbuckles for tuning and a centre drive slipper to protect the transmission.

A waterproof electronic speed control, servo and receiver allow for use in a wide range of conditions and the 2.4ghz radio provides interference free signal no matter where you are.

Topped off and finished with an S15 style pre-printed drift body and a hard compound drift tyre on scale finish wheels, the Banzai is the perfect introduction to sideways street action!

Features

• RTR with Etronix 2.4ghz Radio System
• Waterproof receiver
• Waterproof brushed motor speed control
• Waterproof steering servo
• 550 brushed motor
• Voltz 1800mah 7.2v NiMh battery
• Wall charger for battery
• Moulded tub chassis
• 4wd shaft drive with slipper system
• Big bore oil filled adjustable shocks
• Gearbox metal crown and pinion gear
• Front universal driveshafts
• Adjustable turnbuckles
• Adjustable suspension(droop, camber, toe-in & wheelbase)
• Foam front bumper
• Scale finished wheels
• Drift tyres

Specifications

Length: 440mm
Width: 195mm
Height: 130mm
Wheelbase: 255mm - 256mm
Front Tyre: 24 x 60mm
Rear Tyre: 24 x 60mm
Gear Ratio: 6.5:1

Declaration of Conformity

FTX5529 Declaration of Conformity

Bridging the gap between brushed models and brushless, the Ramraider Brushed Edition promises to attract all comers, young and old to the R/C hobby. Retaining many features from the hugely popular Brushless Edition, this new Ramraider features a 15T 550 High Torque motor, along with a Voltz 2500mAH 2S 7.4V LiPo battery to produce the perfect balance of speed and driveability for novices. The Hobbywing speed control provides perfect control for the power package with plenty of scope to handle future upgrades.

The 4WD shaft system transmission features a slipper unit to protect the driveline as well as metal geared front and rear differentials. Oil filled shock absorbers along with a raised high clearance main chassis, with aluminium front and rear skid plates glide over most terrain effortlessly. Should you take a tumble, shock absorbing bumpers and moulded body roof and tail skid bar rails help protect from heavy damage whenever possible.

Aggressive pattern lug tyres mounted on stylish black spoked wheels deliver traction in abundance. When you are ready, you can take this Ramraider to the next level by adding a whole host of optional upgrades such as rear wheelie bar, aluminium shocks, LED lights and more!

Features

• 99% Ready-to-run
• 2.4ghz Radio System
• 550 15 Turn Motor
• Hobbywing Speed Control
• Waterproof 3kg Steering Servo
• 2S 30C 2500mAH LiPo Battery
• LiPo Balance Charger
• High Ground Clearance Composite Tub Main Chassis
• Front & Rear Aluminium Chassis Skid Plates
• Shock Absorbing Front & Rear Bumpers
• Pivot Ball Front Suspension
• Oil Filled Shock Absorbers
• Adjustable Suspension Turnbuckles
• Full Ball Bearings
• Receiver Box
• Sealed Drivetrain
• Alloy Hinge pin Braces
• Metal Bevel Geared Differentials
• Stylish Impact Printed Body Graphics
• Moulded Roof and Tail Skid Bar Rails

Already a firm favourite with FTX fans, the Apache 4WD semi-scale Trophy Truck now reaches new heights with a host of updates and design improvements. Blending serious off-road capability with impressive drivability, the Apache delivers an exciting all-round off-road experience straight out of the box.

The new 2.0 edition introduces a centre differential for improved handling and smoother power delivery, along with upgraded driveshafts, axles, and outdrives for enhanced durability.

Powering the sealed, shaft-driven 4WD system is a Voltz 3S LiPo battery, Hobbywing 50A speed controller now with XT60 connectors and an Etronix 2500KV brushless motor, providing exhilarating high-speed performance across dirt, gravel, and rough terrain.

The Apache’s high ground clearance moulded tub chassis is now reinforced front-to-rear with an aluminium T-brace for near-zero chassis flex, while aluminium skid plates and updated moulded bumpers add extra protection for hard off-road running. Long-travel suspension has been strengthened with revised arms and a new rear upper link, supported by blue anodised aluminium oil-filled shocks at each corner.

Pivot-ball suspension geometry with adjustable turnbuckles offers wide tunability, allowing drivers to fine-tune the Apache to suit any surface or driving style.

Completing the package is the Apache’s stylish semi-scale Trophy Truck bodyshell, fi ished with impactful graphics in either blue or red. Scale details include moulded roof skid rails, an LED light bar, body post reinforcement plates, and new rear bumper mud flaps.

Aggressive block-pattern soft race tyres mounted on black 8-spoke wheels ensure maximum grip and authentic Trophy Truck stance.

All that’s left is to roll up to the start line, wait for the flag to drop, and hit the throttle!

Features

• 99% Ready-to-run.
• Etronix EX4GT 2.4ghz Radio.
• Etronix 3652 KV2500 Brushless Motor.
• Hobbywing 50A Brushless Speed Control with XT60.
• Etronix Waterproof 6kg Steering Servo.
• Voltz 3S 30C 3500mAH LiPo Battery with XT60.
• Voltz Lipo Charge Sack.
• Etronix LiPo Balance Charger.
• High Ground Clearance Composite Tub Chassis.
• Front to Rear Aluminium Upper Brace.
• Front & Rear Aluminium Chassis Skid Plates.
• Shock Absorbing Front & Rear Bumpers.
• Pivot Ball Front Suspension.
• Aluminium Oil Fill Shock Absorbers.
• Adjustable Suspension Turnbuckles.
• Full Ball Bearings.
• Receiver Box.
• 3 Differential Drive System.
• Steel Hinge pin Braces.
• Metal Bevel Geared Differentials.
• Front Universal CVA Driveshafts.
• LED Roof Lightbar.
• Stylish Impact Printed Body Graphics.
• Moulded Roof Bar Rails.
• Rubber Mud Flaps.
• Socket Screw Hardware.

Already a firm favourite with FTX fans, the Apache 4WD semi-scale Trophy Truck now reaches new heights with a host of updates and design improvements. Blending serious off-road capability with impressive drivability, the Apache delivers an exciting all-round off-road experience straight out of the box.

The new 2.0 edition introduces a centre differential for improved handling and smoother power delivery, along with upgraded driveshafts, axles, and outdrives for enhanced durability.

Powering the sealed, shaft-driven 4WD system is a Voltz 3S LiPo battery, Hobbywing 50A speed controller now with XT60 connectors and an Etronix 2500KV brushless motor, providing exhilarating high-speed performance across dirt, gravel, and rough terrain.

The Apache’s high ground clearance moulded tub chassis is now reinforced front-to-rear with an aluminium T-brace for near-zero chassis flex, while aluminium skid plates and updated moulded bumpers add extra protection for hard off-road running. Long-travel suspension has been strengthened with revised arms and a new rear upper link, supported by blue anodised aluminium oil-filled shocks at each corner.

Pivot-ball suspension geometry with adjustable turnbuckles offers wide tunability, allowing drivers to fine-tune the Apache to suit any surface or driving style.

Completing the package is the Apache’s stylish semi-scale Trophy Truck bodyshell, fi ished with impactful graphics in either blue or red. Scale details include moulded roof skid rails, an LED light bar, body post reinforcement plates, and new rear bumper mud flaps.

Aggressive block-pattern soft race tyres mounted on black 8-spoke wheels ensure maximum grip and authentic Trophy Truck stance.

All that’s left is to roll up to the start line, wait for the flag to drop, and hit the throttle!

Features

• 99% Ready-to-run.
• Etronix EX4GT 2.4ghz Radio.
• Etronix 3652 KV2500 Brushless Motor.
• Hobbywing 50A Brushless Speed Control with XT60.
• Etronix Waterproof 6kg Steering Servo.
• Voltz 3S 30C 3500mAH LiPo Battery with XT60.
• Voltz Lipo Charge Sack.
• Etronix LiPo Balance Charger.
• High Ground Clearance Composite Tub Chassis.
• Front to Rear Aluminium Upper Brace.
• Front & Rear Aluminium Chassis Skid Plates.
• Shock Absorbing Front & Rear Bumpers.
• Pivot Ball Front Suspension.
• Aluminium Oil Fill Shock Absorbers.
• Adjustable Suspension Turnbuckles.
• Full Ball Bearings.
• Receiver Box.
• 3 Differential Drive System.
• Steel Hinge pin Braces.
• Metal Bevel Geared Differentials.
• Front Universal CVA Driveshafts.
• LED Roof Lightbar.
• Stylish Impact Printed Body Graphics.
• Moulded Roof Bar Rails.
• Rubber Mud Flaps.
• Socket Screw Hardware.

Ok folks, who’s ready for some rip-roaring, ram-raiding off road bashing r/c fun? FTX’s latest RamRaider 1/10th Monster Truck works with the established Rokatan chassis platform to deliver an exciting, fast and driv-able vehicle all in one complete ready-to-run package!
Powered by a Hobbywing 50A brushless speed control and 2500kv motor, coupled with the included Voltz 3S 3500mAh Lipo battery the RamRaider can reach impressive top speeds for its size, while still being very drivable on most surfaces. The rear mounted wheelie bar works to provide a sta-ble footing for those heavy accelerations when you light up the rear tyres.

Direct drive 4wd with slipper clutch, along with front and rear metal geared differentials and front CVA universal driveshafts help distribute the power to all corners

Oil filled aluminium shock absorbers along with a raised high clearance main chassis, with aluminium front and rear skid plates glide over most terrain effortlessly. Should you take a tumble, shock absorbing bumpers and moulded body roof and tail skid bar rails help protect from heavy damage when possible.

Aggressive pattern lug tyres mounted on stylish black spoked wheels deliver traction in abundance. Furthermore, if you are out so long having fun that the light starts to fade, fear not... the bumper mounted LED lights and LED roof bar will light the way!

Features

• 2.4ghz Radio System
• 3652 KV2500 Brushless Motor
• Waterproof 50A Brushless Speed Control
• Waterproof 6kg Steering Servo
• 3S 30C 3500mAH LiPo Battery
• LiPo Balance Charger
• High Ground Clearance Tub Main Chassis
• Front & Rear Aluminium Chassis Skid Plates
• Shock Absorbing Front & Rear Bumpers
• Pivot Ball Front Suspension
• Aluminium Oil Fill Shock Absorbers
• Adjustable Suspension Turnbuckles
• Full Ball Bearings
• Receiver Box
• Sealed Drivetrain with Slipper Unit
• Alloy Hinge pin Braces
• Metal Bevel Geared Differentials
• Front Universal CVA Driveshafts
• LED Roof Lightbar and bumper lights
• Stylish Impact Printed Body Graphics
• Moulded Roof and Tail Skid Bar Rails
• Wheelie Bar

Specifications

Length: 480mm
Width: 350mm
Height: 200mm
Wheelbase: 270mm
Tyre: ø 125 x 70mm
Gear Ratio: 8.3:1

Required To Complete

• 4 x AA Batteries

Declaration of Conformity

• Ram Raider Declaration of Conformity

Ok folks, who’s ready for some rip-roaring, ram-raiding off road bashing r/c fun? FTX’s latest RamRaider 1/10th Monster Truck works with the established Rokatan chassis platform to deliver an exciting, fast and driv-able vehicle all in one complete ready-to-run package!
Powered by a Hobbywing 50A brushless speed control and 2500kv motor, coupled with the included Voltz 3S 3500mAh Lipo battery the RamRaider can reach impressive top speeds for its size, while still being very drivable on most surfaces. The rear mounted wheelie bar works to provide a sta-ble footing for those heavy accelerations when you light up the rear tyres.

Direct drive 4wd with slipper clutch, along with front and rear metal geared differentials and front CVA universal driveshafts help distribute the power to all corners

Oil filled aluminium shock absorbers along with a raised high clearance main chassis, with aluminium front and rear skid plates glide over most terrain effortlessly. Should you take a tumble, shock absorbing bumpers and moulded body roof and tail skid bar rails help protect from heavy damage when possible.

Aggressive pattern lug tyres mounted on stylish black spoked wheels deliver traction in abundance. Furthermore, if you are out so long having fun that the light starts to fade, fear not... the bumper mounted LED lights and LED roof bar will light the way!

Features

• 2.4ghz Radio System
• 3652 KV2500 Brushless Motor
• Waterproof 50A Brushless Speed Control
• Waterproof 6kg Steering Servo
• 3S 30C 3500mAH LiPo Battery
• LiPo Balance Charger
• High Ground Clearance Tub Main Chassis
• Front & Rear Aluminium Chassis Skid Plates
• Shock Absorbing Front & Rear Bumpers
• Pivot Ball Front Suspension
• Aluminium Oil Fill Shock Absorbers
• Adjustable Suspension Turnbuckles
• Full Ball Bearings
• Receiver Box
• Sealed Drivetrain with Slipper Unit
• Alloy Hinge pin Braces
• Metal Bevel Geared Differentials
• Front Universal CVA Driveshafts
• LED Roof Lightbar and bumper lights
• Stylish Impact Printed Body Graphics
• Moulded Roof and Tail Skid Bar Rails
• Wheelie Bar

Specifications

Length: 480mm
Width: 350mm
Height: 200mm
Wheelbase: 270mm
Tyre: ø 125 x 70mm
Gear Ratio: 8.3:1

Required To Complete

• 4 x AA Batteries

Declaration of Conformity

• Ram Raider Declaration of Conformity

Get ready to turn heads on the strip and streets with FTX’s brushless powered 1/7th on road 4WD, Supaforza GT. Fusing muscle with style, the Supaforza is ready to deliver an on-road, street racing experience like never before.

Modelling an aggressively styled scale bodyshell that features moulded scale accessories such as front grill, side mirrors, rear spoiler, head and taillight lenses for realistic LED lighting system and oversized rear tyres, the Supaforza GT is ready to live up to its supercar billing.

Under the hood, a Hobbywing 150Amp speed control and 2000kv 4274 4-pole brushless motor are ready to link up with your choice of 4S or 6S LiPo battery power, for some rubber burning street runs. With speed you need control and with channelled chassis side guards and a rear diffuser for ground effects, coupled with Fastrax F-Zero high traction tyres that are internally belted to stop expansion under power, using a wider rear footprint, high speed stability is assured.

A robust, shaft drive, 3-differential drivetrain, featuring heavy-duty steel gears and spiral-tooth diff gears and front universal front CVD driveshafts are ready for you to apply the power. At these speeds it’s impossible to cover everything, but a 3mm thick aluminium chassis, CNC 6061 T6 machined aluminium front and rear towers, aluminium front to back chassis brace and front foam bumper are all designed to help minimise damage in the event of an off or impact.

Looking to fine tune the Supaforza’s handling for a faster run or lap time? Then you have the tools as standard with the adjustable aluminium front and rear shock absorbers that include optional spring ratings. Multiple shock absorber positions and front and rear anti-roll bars will help you dial-in your ride in no time. Whilst a 19kg metal geared servo controls the steering, you can also experiment with some sideways drift style action with the integrated, servo operated mechanical diff brake option, for some handbrake turns. Conditions a little slippery? No problem, the Etronix 2.4ghz radio system features a built-in gyro in the receiver to help you keep your Supaforza on track. Burn rubber and light up the road with the Supaforza GT!

Features

• 99% Ready-to-Run
• 2.4ghz Etronix radio w/gyro programmed RX
• Waterproof 18kg metal geared steering servo
• Hobbywing 150Amp brushless speed control
• 2000kv 4-pole 4274 brushless motor
• Chassis mounted cooling fan for motor
• Integrated mechanical brake option
• CNC Alum. 6061 T6 Front Rear Shock Towers
• CNC Aluminium Centre chassis Brace
• Pivot ball suspension
• Heavy-duty Front CVD driveshafts
• Big bore aluminium-threaded oil filled shocks
• 3mm aluminium chassis
• Moulded chassis side guards & rear diffuser
• Front foam bumper
• 3-differential shaft drive transmission
• Heavy-duty steel gears
• Spiral-tooth diff gears
• Ball bearings
• Belted Intermediate Treaded tyres
• 7-spoke wheels w/wide offset rears
• Supercar inspired body with moulded grill, mirrors, spoiler & light lenses
• Realistic front and rear LED light system

Specifications

Length: 700mm
Width: 350mm
Height: 200mm
Wheelbase: 410mm
Front Tyre: Φ43*100mm
Rear Tyre: Φ53*107mm

Required To Complete

• 4 x AA batteries
• 4S or 6S Lipo battery w/XT90 connector
• Charger

Declaration of Conformity

• FTX5494R Declaration of Conformity

Get ready to turn heads on the strip and streets with FTX’s brushless powered 1/7th on road 4WD, Supaforza GT. Fusing muscle with style, the Supaforza is ready to deliver an on-road, street racing experience like never before.

Modelling an aggressively styled scale bodyshell that features moulded scale accessories such as front grill, side mirrors, rear spoiler, head and taillight lenses for realistic LED lighting system and oversized rear tyres, the Supaforza GT is ready to live up to its supercar billing.

Under the hood, a Hobbywing 150Amp speed control and 2000kv 4274 4-pole brushless motor are ready to link up with your choice of 4S or 6S LiPo battery power, for some rubber burning street runs. With speed you need control and with channelled chassis side guards and a rear diffuser for ground effects, coupled with Fastrax F-Zero high traction tyres that are internally belted to stop expansion under power, using a wider rear footprint, high speed stability is assured.

A robust, shaft drive, 3-differential drivetrain, featuring heavy-duty steel gears and spiral-tooth diff gears and front universal front CVD driveshafts are ready for you to apply the power. At these speeds it’s impossible to cover everything, but a 3mm thick aluminium chassis, CNC 6061 T6 machined aluminium front and rear towers, aluminium front to back chassis brace and front foam bumper are all designed to help minimise damage in the event of an off or impact.

Looking to fine tune the Supaforza’s handling for a faster run or lap time? Then you have the tools as standard with the adjustable aluminium front and rear shock absorbers that include optional spring ratings. Multiple shock absorber positions and front and rear anti-roll bars will help you dial-in your ride in no time. Whilst a 19kg metal geared servo controls the steering, you can also experiment with some sideways drift style action with the integrated, servo operated mechanical diff brake option, for some handbrake turns. Conditions a little slippery? No problem, the Etronix 2.4ghz radio system features a built-in gyro in the receiver to help you keep your Supaforza on track. Burn rubber and light up the road with the Supaforza GT!

Features

• 99% Ready-to-Run
• 2.4ghz Etronix radio w/gyro programmed RX
• Waterproof 18kg metal geared steering servo
• Hobbywing 150Amp brushless speed control
• 2000kv 4-pole 4274 brushless motor
• Chassis mounted cooling fan for motor
• Integrated mechanical brake option
• CNC Alum. 6061 T6 Front Rear Shock Towers
• CNC Aluminium Centre chassis Brace
• Pivot ball suspension
• Heavy-duty Front CVD driveshafts
• Big bore aluminium-threaded oil filled shocks
• 3mm aluminium chassis
• Moulded chassis side guards & rear diffuser
• Front foam bumper
• 3-differential shaft drive transmission
• Heavy-duty steel gears
• Spiral-tooth diff gears
• Ball bearings
• Belted Intermediate Treaded tyres
• 7-spoke wheels w/wide offset rears
• Supercar inspired body with moulded grill, mirrors, spoiler & light lenses
• Realistic front and rear LED light system

Specifications

Length: 700mm
Width: 350mm
Height: 200mm
Wheelbase: 410mm
Front Tyre: Φ43*100mm
Rear Tyre: Φ53*107mm

Required To Complete

• 4 x AA batteries
• 4S or 6S Lipo battery w/XT90 connector
• Charger

Declaration of Conformity

• FTX5494R Declaration of Conformity

It might be 4WD, but the EVO30 captures the essence of the legendary RWD supercars of the 80’s in all their glory.

Choose either the car park for sideways drift or hit the throttle for some speed runs by choosing either hard drift tyres or sticky soft treaded rubber tyres included with the EVO30.

With a wide aero inspired wide moulded main chassis featuring no screw heads, this smooth finish, coupled with a rear diffuser provides stability at speed. Shaft driven with sealed, geared front and rear differentials feature metal gears throughout for maximum durability. The modular radio tray neatly houses a 15kg Etronix metal geared steering servo and Hobbywing brushless 60A esc while the 3300KV brushless motor powered by a Voltz 2S 2500mAH Lipo battery delivers impressive straightline speed.

What’s more you can adjust the gyro enabled receiver to help fine tune your drifting and opposite lock handling at speed.
Oil filled shock absorbers, anti-roll bars and adjustable double wishbone suspension lets you tweak to suit your settings and tyre choice; either treaded rubber tyres for street racing, featuring 25mm wide front and 30mm wide rear for better stability at high speed or hard plastic boots on 6-spoke wheels for sideways drift driving.

Topped off with classic ‘80s body styling, that features a detailed moulded front grill with light lenses along with a front and rear multifunction LED light set, you just need to hit the power EVO30 style!

Features

• 99% Ready-to-run
• FTX 2.4ghz 5ch Radio System
• Etronix 3652 KV3300 Brushless Motor
• Hobbywing 60A Brushless Speed Control
• Etronix Waterproof 15kg MG Steering Servo
• Voltz 2S 30C 2500mAH LiPo Battery
• Etronix LiPo Balance Charger
• Gyro Stability Control Option
• Multifunction LED Light Box Control
• Scale finished body w/moulded accessories
• Front and Rear Anti-Roll Bars Included Rubber Street & Hard Slick Drift tyre sets i
• Front & Rear Metal Gear Sealed Differential
• Shaft driven 4WD
• Front CVD Universal Driveshafts
• Ball Bearings
• Adjustable Oil Filled Shock Absorbers
• Rear Moulded Diffuser Bumper
• Moulded wide main chassis featuring screwless base
• Quick Release Battery Holder

Specifications

Length: 438mm
Width: 200mm
Height: 130mm
Wheelbase: 260mm

Required to complete

• 4 x AA Batteries

It might be 4WD, but the EVO30 captures the essence of the legendary RWD supercars of the 80’s in all their glory.

Choose either the car park for sideways drift or hit the throttle for some speed runs by choosing either hard drift tyres or sticky soft treaded rubber tyres included with the EVO30.

With a wide aero inspired wide moulded main chassis featuring no screw heads, this smooth finish, coupled with a rear diffuser provides stability at speed. Shaft driven with sealed, geared front and rear differentials feature metal gears throughout for maximum durability. The modular radio tray neatly houses a 15kg Etronix metal geared steering servo and Hobbywing brushless 60A esc while the 3300KV brushless motor powered by a Voltz 2S 2500mAH Lipo battery delivers impressive straightline speed.

What’s more you can adjust the gyro enabled receiver to help fine tune your drifting and opposite lock handling at speed.
Oil filled shock absorbers, anti-roll bars and adjustable double wishbone suspension lets you tweak to suit your settings and tyre choice; either treaded rubber tyres for street racing, featuring 25mm wide front and 30mm wide rear for better stability at high speed or hard plastic boots on 6-spoke wheels for sideways drift driving.

Topped off with classic ‘80s body styling, that features a detailed moulded front grill with light lenses along with a front and rear multifunction LED light set, you just need to hit the power EVO30 style!

Features

• 99% Ready-to-run
• FTX 2.4ghz 5ch Radio System
• Etronix 3652 KV3300 Brushless Motor
• Hobbywing 60A Brushless Speed Control
• Etronix Waterproof 15kg MG Steering Servo
• Voltz 2S 30C 2500mAH LiPo Battery
• Etronix LiPo Balance Charger
• Gyro Stability Control Option
• Multifunction LED Light Box Control
• Scale finished body w/moulded accessories
• Front and Rear Anti-Roll Bars Included Rubber Street & Hard Slick Drift tyre sets i
• Front & Rear Metal Gear Sealed Differential
• Shaft driven 4WD
• Front CVD Universal Driveshafts
• Ball Bearings
• Adjustable Oil Filled Shock Absorbers
• Rear Moulded Diffuser Bumper
• Moulded wide main chassis featuring screwless base
• Quick Release Battery Holder

Specifications

Length: 438mm
Width: 200mm
Height: 130mm
Wheelbase: 260mm

Required to complete

• 4 x AA Batteries

It might be 4WD, but the EVO30 captures the essence of the legendary RWD supercars of the 80’s in all their glory.

Choose either the car park for sideways drift or hit the throttle for some speed runs by choosing either hard drift tyres or sticky soft treaded rubber tyres included with the EVO30.

With a wide aero inspired wide moulded main chassis featuring no screw heads, this smooth finish, coupled with a rear diffuser provides stability at speed. Shaft driven with sealed, geared front and rear differentials feature metal gears throughout for maximum durability. The modular radio tray neatly houses a 9kg Etronix metal geared steering servo, Hobbywing brushed WP1040 esc, 17T 550 brushed motor all powered by a Voltz 2000mAH Ni-MH battery making it the perfect choice for entry level users.

Oil filled shock absorbers, anti-roll bars and adjustable double wishbone suspension lets you tweak to suit your settings and tyre choice; either treaded rubber tyres for street racing, featuring 25mm wide front and 30mm wide rear for better stability at high speed or hard plastic boots on 6-spoke wheels for sideways drift driving.

Topped off with classic ‘80s body styling, that features a detailed moulded front grill with light lenses along with a front and rear multifunction LED light set.

Hit the throttle and burn rubber with the FTX EVO30!

Features

• 99% Ready-to-run
• Etronix 2.4ghz 5ch Radio System
• Hobbywing WP1040 Brushed Speed Control
• 17T 550 Sized Brushed Motor
• Voltz 2000mAH Ni-Mh Battery Pack
• Etronix Waterproof 9kg Metal Geared Servo
• USB Charger
• Multifunction LED Light Box Control
• Scale finished body w/moulded accessories
• Front and Rear Anti-Roll Bars Included
• Rubber Street and Hard Slick Drift tyre sets
• Front & Rear Metal Gear Sealed Differential
• Front CVD Universal Driveshafts
• Ball Bearings Throughout
• Adjustable Oil Filled Shock Absorbers
• Rear Moulded Diffuser Bumper
• Quick Release Battery Holder

Specifications

Length: 438mm
Width: 200mm
Height: 130mm
Wheelbase: 260mm

Required to complete

• 4 x AA Batteries

It might be 4WD, but the EVO30 captures the essence of the legendary RWD supercars of the 80’s in all their glory.

Choose either the car park for sideways drift or hit the throttle for some speed runs by choosing either hard drift tyres or sticky soft treaded rubber tyres included with the EVO30.

With a wide aero inspired wide moulded main chassis featuring no screw heads, this smooth finish, coupled with a rear diffuser provides stability at speed. Shaft driven with sealed, geared front and rear differentials feature metal gears throughout for maximum durability. The modular radio tray neatly houses a 9kg Etronix metal geared steering servo, Hobbywing brushed WP1040 esc, 17T 550 brushed motor all powered by a Voltz 2000mAH Ni-MH battery making it the perfect choice for entry level users.

Oil filled shock absorbers, anti-roll bars and adjustable double wishbone suspension lets you tweak to suit your settings and tyre choice; either treaded rubber tyres for street racing, featuring 25mm wide front and 30mm wide rear for better stability at high speed or hard plastic boots on 6-spoke wheels for sideways drift driving.

Topped off with classic ‘80s body styling, that features a detailed moulded front grill with light lenses along with a front and rear multifunction LED light set.

Hit the throttle and burn rubber with the FTX EVO30!

Features

• 99% Ready-to-run
• Etronix 2.4ghz 5ch Radio System
• Hobbywing WP1040 Brushed Speed Control
• 17T 550 Sized Brushed Motor
• Voltz 2000mAH Ni-Mh Battery Pack
• Etronix Waterproof 9kg Metal Geared Servo
• USB Charger
• Multifunction LED Light Box Control
• Scale finished body w/moulded accessories
• Front and Rear Anti-Roll Bars Included
• Rubber Street and Hard Slick Drift tyre sets
• Front & Rear Metal Gear Sealed Differential
• Front CVD Universal Driveshafts
• Ball Bearings Throughout
• Adjustable Oil Filled Shock Absorbers
• Rear Moulded Diffuser Bumper
• Quick Release Battery Holder

Specifications

Length: 438mm
Width: 200mm
Height: 130mm
Wheelbase: 260mm

Required to complete

• 4 x AA Batteries

Looking to hit the bullseye with an amazing value, high performance 1/10 Truggy then look no further than the FTX Crossbow. Brimming with proven features already rolled out on established models such as the Ramraider and Apache, the Crossbow is sure to be a hit with fans of high-speed brushless powered off-road bashing.

The chassis has been updated to provide more space for different sized LiPo batteries, aside from the included Voltz 3S 3500mAh and has updated aluminium skid plates for improved protection. Hobbywing, the leader in brushless technology cover speed control and motor duties with a 60A esc and 3652 KV2500 motor.

Long throw, double wishbone suspension with pivot ball front set-up, feature reinforced lower arms for less flex, while aluminium adjustable, oil filled big bore shock absorbers, finished in stylish blue are ready for what awaits on each corner.

A ballraced, sealed drivetrain with slipper unit along with metal diff gears with front universal driveshafts are ready to take care of the power when you hit the gas. New, sturdy front and rear towers with a full-length brace bar provide extra rigidity, while the heavy-duty rear spoiler maintains traction and stability at speed. Topping things off is the Crossbow’s aggressively styled, low slung bodyshell complete with roof light bar, roof skid rails and mounting point reinforcement plates.

Take your off-road R/C experience to new heights with the FTX Crossbow!

Features

• 99% Ready-to-run
• Etronix 2.4ghz Radio System
• Etronix 3652 KV2500 Brushless Motor
• Hobbywing 60A Brushless Speed Control
• Etronix Waterproof 6kg Digital Steering Servo
• Voltz 3S 30C 3500mAH LiPo Battery
• Etronix LiPo Balance Charger
• High Ground Clearance Composite Tub MainChassis
• Front & Rear 6061 T6 Aluminium Chassis Skid Plates
• Pivot Ball Front Suspension
• Aluminium Oil Filled Shock Absorbers
• Adjustable Suspension Turnbuckles
• Full Ball Bearings
• Receiver Box
• Sealed Drivetrain with Slipper Unit
• Alloy Hinge pin Braces
• Metal Bevel Geared Differentials
• Front Universal CVA Driveshafts
• Reinforced Lower Suspension Arms
• Aluminium Centre Chassis Brace
• LED Roof Lightbar
• Moulded Body Mounting Braces
• Stylish Impact Printed Body Graphics
• Moulded Roof Bar Rails

Specification

Length: 565mm
Width: 300mm
Height: 220mm
Wheelbase: 328mm
Tyre: ø 125 x 70mm

Required to complete

• 4 x AA Batteries

Looking to hit the bullseye with an amazing value, high performance 1/10 Truggy then look no further than the FTX Crossbow. Brimming with proven features already rolled out on established models such as the Ramraider and Apache, the Crossbow is sure to be a hit with fans of high-speed brushless powered off-road bashing.

The chassis has been updated to provide more space for different sized LiPo batteries, aside from the included Voltz 3S 3500mAh and has updated aluminium skid plates for improved protection. Hobbywing, the leader in brushless technology cover speed control and motor duties with a 60A esc and 3652 KV2500 motor.

Long throw, double wishbone suspension with pivot ball front set-up, feature reinforced lower arms for less flex, while aluminium adjustable, oil filled big bore shock absorbers, finished in stylish blue are ready for what awaits on each corner.

A ballraced, sealed drivetrain with slipper unit along with metal diff gears with front universal driveshafts are ready to take care of the power when you hit the gas. New, sturdy front and rear towers with a full-length brace bar provide extra rigidity, while the heavy-duty rear spoiler maintains traction and stability at speed. Topping things off is the Crossbow’s aggressively styled, low slung bodyshell complete with roof light bar, roof skid rails and mounting point reinforcement plates.

Take your off-road R/C experience to new heights with the FTX Crossbow!

Features

• 99% Ready-to-run
• Etronix 2.4ghz Radio System
• Etronix 3652 KV2500 Brushless Motor
• Hobbywing 60A Brushless Speed Control
• Etronix Waterproof 6kg Digital Steering Servo
• Voltz 3S 30C 3500mAH LiPo Battery
• Etronix LiPo Balance Charger
• High Ground Clearance Composite Tub MainChassis
• Front & Rear 6061 T6 Aluminium Chassis Skid Plates
• Pivot Ball Front Suspension
• Aluminium Oil Filled Shock Absorbers
• Adjustable Suspension Turnbuckles
• Full Ball Bearings
• Receiver Box
• Sealed Drivetrain with Slipper Unit
• Alloy Hinge pin Braces
• Metal Bevel Geared Differentials
• Front Universal CVA Driveshafts
• Reinforced Lower Suspension Arms
• Aluminium Centre Chassis Brace
• LED Roof Lightbar
• Moulded Body Mounting Braces
• Stylish Impact Printed Body Graphics
• Moulded Roof Bar Rails

Specification

Length: 565mm
Width: 300mm
Height: 220mm
Wheelbase: 328mm
Tyre: ø 125 x 70mm

Required to complete

• 4 x AA Batteries

Tackle the trails with the Centaur, the latest all-terrain ready-to-run vehicle from FTX, blending the latest design features and finish.

The highly detailed semi-scale bodyshell is finish with a two-way paint of matt black roof and wheel arches, paired with a gloss main section.
Moulded scale grill, light buckets, mirrors, handles and wipers complete the exterior along with a moulded interior.

Moulded inner fenders fill each wheel well, while oil filled, adjustable aluminium shock absorbers provide exceptional rough track handling.

The scale front bumper accommodates a winch cable and hook protected by a stamped aluminium lower skid plate. The cable can be extended up to 90cm via a 25kg MG 360° winch servo.

Multi-function front and rear LED lights are factory installed, connecting seamlessly to the vehicle via a magnetic connector for hassle free body removal along with the Centaur’s hidden clipless mounts.

Under the hood, the Centaur boasts several features that seasoned trail fans will like such as a servo operated two-speed gearbox and DIG system. Flip between high and low drive gears and engage/disengage the locked rear axle function with the DIG function all with the press of a TX button.

With a waterproof 25kg metal geared steering servo with metal arm, 35T 550 brushed motor and Hobbywing WP-1060 Speed control all installed as standard the Centaur is ready to take your trail adventure to the next level.

Features

• 99% Ready-To-Run
• 6-Channel 2.4ghz Rdio System
• Hobbywing WP-1060/60A Speed Control
• 35t 550 Brushed Motor
• Voltz 2000mah 7.2v Nimh Battery
• Etronix USB Charger
• 25kg Metal Geared Waterproof Steering Servo
• 25kg Metal Geared Waterproof 360° Winch Servo
• Front Stainless Steel Bumper Skid Plate
• CNC Aluminium Bumper Winch Mount
• Servo Operated High-Low 2-Speed Function
• Servo Operated Dig Locking Rear Axle Function
• Front And Rear Cnc Steel Spiral Gears
• Front Steel Cvd Universal Driveshafts
• Centre Steel Telescopic Transmission Driveshafts
• Hardened Stainless Steel Chassis Rails
• 46° Steering Angle
• CNC Aluminium Oil Filled Shock Absorbers
• Side Chassis Plates & Inner Wheel Fender Arches
• 110mm Diameter Butyl Rubber Tyres
• Detailed Bodyshell With Moulded Scale Features
• Detailed Interior Set
• Multi-Function Front And Rear Led Lighting With Magnetic Connector

Specification

Length: 512mm
Width: 240mm
Height: 241mm
Weight: 3030g (no battery)
Wheelbase: 313mm
Gear Ratio Low: 53:1 (F), 57:1 (R)
Gear Ratio High: 28:1 (F), 30:1 (R)
Tyre Diameter: 110mm
Wheel Diameter: 50mm
Ground Clearance: 35mm (Links) 73mm Chassis

Required to complete

• 4 x AA batteries