Clearance Sale 25-50% Off

Body Replica: Lexan bodyshell - Designed around the Chevy Nascar 

This shell is designed to fit any our NEW 1/12 SUPASTOX Chassis

The shell comes in clear Lexan plastic and is ready paint and cut out.

The dimensions of the shell are:

Length: 350mm approx

Width: 164mm approx

Height: 85mm approx

Wheelbase: 205mmto 210mm MTC (M-Chassis

Lexan Spoiler Included - NO HARDWARE INCLUDED - As these are custom made bodies, they may have tiny imperfections due to the moulding process, but is perfectly normal.

(Masking is included - However no stickers will be included - No stickers for lights, grills etc - most builders mask off the lights and grills and paint instead)

All body detailing will be down to the painter - or ask Frosty Models to print you some stickers inhouse at additional costs.

Body Replica: Lexan bodyshell

This shell is designed to fit any 1/12th Standard RC Car.

The shell comes in clear Lexan plastic and is ready paint and cut out.

The dimensions of the shell are:

Length: 350mm 

Width: 163mm

Height: 85mm

Wheelbase: 205mm

Lexan Spoiler Included - NO HARDWARE INCLUDED - As these are custom made bodies, they may have tiny imperfections due to the moulding process, but is perfectly normal.

(Masking should be included - However no stickers will be included - No stickers for lights, grills etc - most builders mask off the lights and grills and paint instead)

LOUISE RC 1/10 LMX M-CHASSIS KIT

To Fit all 210mm M-Chassis (MTC Class) Bodies 

Used 55mm Tyres on 12mm Hex - Same as Tamiya

Features

• Full Bearing.
• CVD Drive Shaft.
• Carbon Fibre Chassis, Upper Deck, Shock Tower.
• Aluminium Motor Mount.
• Aluminium Servo Mount.
• Aluminium Centre Drive Shaft.
• Aluminium Spur Gear Hub.
• Aluminium Shocks.
• Aluminium 12mm Hex Hub.
• Metal Gear Diff.
• Full Turnbuckle.

Specifications

Drivetrain: Shaft Drive 4WD
Track Width: 166mm
Wheelbase: 208 - 210mm
Internal Ratio: 2.47
Gear Ratio: 4.56
Tyre Diameter: 55mm

Body Replica: Lexan bodyshell - Designed around the a Nascar 

This shell is designed to fit any our NEW 1/12 SUPASTOX Chassis

The shell comes in clear Lexan plastic and is ready paint and cut out.

The dimensions of the shell are:

Length: 350mm approx

Width: 164mm approx

Height: 85mm approx

Wheelbase: 205mm and will fit 201mm MTC (M-Chassiss

NO HARDWARE INCLUDED - As these are custom made bodies, they may have tiny imperfections due to the moulding process, but is perfectly normal.

(Masking is included - However no stickers will be included - No stickers for lights, grills etc - most builders mask off the lights and grills and paint instead)

All body detailing will be down to the painter - or ask Frosty Models to print you some stickers inhouse at additional costs.

Body Replica: Lexan bodyshell

This shell is designed to fit any 1/12th Standard RC Car.

The shell comes in clear Lexan plastic and is ready paint and cut out.

The dimensions of the shell are:

Length: 350mm approx

Width: 160mm approx

Height: 85mm approx

Wheelbase: 205mm

Lexan Spoiler Included - NO HARDWARE INCLUDED - As these are custom made bodies, they may have tiny imperfections due to the moulding process, but is perfectly normal.

BRCA Legal 

(Masking should be included - However no stickers will be included - No stickers for lights, grills etc - most builders mask off the lights and grills and paint instead.

GT12 Atom pan car body Type F. This beautiful body is supplied clear with overspray film. Includes window masks, wing and wing mounting hardware.

(201mm wheelbase / 164mm wide)

BRCA GT12 Approved body.

Aston Martin GT12 Bodyshell. Comes in clear lexan, ready to be cut out. This shell is designed to fit a Schumacher Supastox or Mardave - Can also fit the newer Atom GT12. The shell is not painted or cut out. Aston Martin GT12 Wing and window masks supplied with body. BRCA Legal for the GT12 Series

Body is supplied in Clear Lexan Polycarbonate plastic and is not painted or cut out.

(201mm wheelbase / 162mm wide)

Note: No wing mounting nuts and bolts - no stickers 

Body Replica: Lexan bodyshell - Designed around the Chevy Nascar 

This shell is designed to fit any our NEW 1/12 SUPASTOX Chassis

The shell comes in clear Lexan plastic and is ready paint and cut out.

The dimensions of the shell are:

Length: 350mm approx

Width: 164mm approx

Height: 85mm approx

Wheelbase: 205mm

Lexan Spoiler Included - NO HARDWARE INCLUDED - As these are custom made bodies, they may have tiny imperfections due to the moulding process, but is perfectly normal.

(Masking is included - However no stickers will be included - No stickers for lights, grills etc - most builders mask off the lights and grills and paint instead)

All body detailing will be down to the painter - or ask Frosty Models to print you some stickers inhouse at additional costs.

Body Replica: Lexan bodyshell

This shell is designed to fit any 1/12th Standard RC Car.

The shell comes in clear Lexan plastic and is ready paint and cut out.

The dimensions of the shell are:

Length: 350mm approx

Width: 160mm approx

Height: 85mm approx

Wheelbase: 205mm

Lexan Spoiler Included - NO HARDWARE INCLUDED - As these are custom made bodies, they may have tiny imperfections due to the moulding process, but is perfectly normal.

(Masking should be included - However no stickers will be included - No stickers for lights, grills etc - most builders mask off the lights and grills and paint instead.

Body Replica: Lexan bodyshell

This shell is designed to fit any 1/12th Standard RC Car.

The shell comes in clear Lexan plastic and is ready paint and cut out.

The dimensions of the shell are:

Length: 350mm approx

Width: 160mm approx

Height: 85mm approx

Wheelbase: 205mm

WING Included (mounts may differ from picture.

BRCA Legal 

(Masking should be included - However no stickers will be included - No stickers for lights, grills etc - most builders mask off the lights and grills and paint instead.

SupaStox GT12 pan car body, AM Type with wing, window masks and wing mounting hardware.

Body is supplied in Clear Lexan Polycarbonate plastic and is not painted or cut out.

(200mm wheelbase / 160mm wide)

Enjoy powerful pickup truck performance
In realistic 1/10 scale!

With rugged tires and undercarriage to handle rough terrain and a large rear cargo bed, pickup trucks are in high demand throughout North America, Southeast Asia, Africa, and Australia and many popular pickup trucks have been recreated as R/C models. Toyota developed the Tacoma mainly for the North American market and it has continued to sell well since its release in 1995. This model is based on the 3rd generation Tacoma which first appeared to much acclaim in 2016 due to its aggressive styling and practicality. The top of the range Tacoma TRD Pro has been recreated by Kyosho with a tough 1/10 scale chassis in a Readyset package. Kyosho’s molding craftmanship immaculately reproduces the TRD Pro body in lightweight but rigid polycarbonate resin with the strength for hard off-road driving. Based on the off-road KB10 chassis, the long wheelbase and short tread of the KB10L chassis matches the body perfectly. The shaft-driven 4WD system reliably transfers the brute power of the TORX10L brushless motor to reach top speeds of about 75km/h under the management of the ESC (Electronic Speed Control) and a compatible 3S (11.1V) lipo battery. This convenient Readyset package contains the fun of an ultra-scale pickup truck on a dynamic off-road chassis with a finish similar in quality to premium display-only models.

• Readyset includes R/C system pre-installed on the chassis and a pistol-grip transmitter.
• Pre-painted and assembled "Toyota Tacoma TRD Pro" ultra-scale body fully captures the form of the original truck.
• Newly designed body mounts conceal body pins from the outside to realize a higher sense of scale.
• LED lights (sold separately) can be attached to the front and rear light buckets. The scale feeling is further enhanced when 4 front lights and 2 rear lights (4 if rear fog lights installed) are fully lit.
• Recommended: Front 4 lights, Rear 2 lights (97054-4CR x 1, 97054-2B x 1) / With rear fog lights, Front 4 lights, Rear 4 lights (97054-4B x 1, 97054-4CR x 1)
• Full-time 4WD KB10L chassis can handle rough roads as well as on-road and flat dirt.
• Battery holder compatible with 3S size batteries. The battery is fixed with a belt that is easy to take off and on.
• Includes powerful TORX 10L brushless motor and waterproof BRAINZ 10 + brushless ESC.
• 3 differential design for enhanced running stability. #10000 oil is pre-filled in the center diff and #5000 oil in the front and rear diffs.
• Full ball bearings (22) equipped for optimal drive efficiency and durability.
• Each gear unit, receiver are enclosed in a sealed box to prevent compromise from sand and dirt while driving.
• Pistol grip type Syncro KT-231P+ transmitter included allows various setting changes.
• Battery charger and battery for chassis plus 4 x AA batteries for transmitter must be purchased separately.

Technical Information

• Length 572mm
• Width 274mm
• Height 214mm
• Wheelbase 340mm
• Tread F/R 224mm
• Tires（F & R） φ110 x 47mm
• Gear Ratio 10.41:1
• Weight 3,410g (approx.)
• Motor TORX10L Brushless Motor kv2850

Readyset Contents

• Factory assembled chassis complete with control linkages
• Pre-cut and painted body complete with decals applied
• 2.4GHz Syncro KT-231P+ transmitter
• 1.5mm/2.0mm/2.5mm L shaped hex wrench
• Cross wrench
• 4/5/5.5/7/10mm Integrated spanner

Required for Operation

• AA-size batteries x 4 for transmitter
• Battery for driving (2-3S LiPo battery *Installable battery size 143x47x30mm)
• Charger for LiPo battery

Now driving R/C is even more fun Newly designed FZ02L chassis with realistic racing car body

For the pure enjoyment of R/C car driving, the combination of a beautifully reproduced car body with the FAZER series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance to a new level. A simplified design with fewer parts has improved maintenance efficiency and reduced weight while core strength and rigidity has been increased through new materials and ribbing and stiffeners on front and rear. In addition, the symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, irrespective of power source. Featuring slipper clutch, front & rear gear differentials, oil shocks and full ball bearing specs, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 274mm by replacing some parts (sold separately) for compatibility with other 1/10 scale body styles, in addition the body included. The Readyset package comes fully assembled and includes everything except charger and battery for the chassis, and batteries for the transmitter.

- “Ultra Scale Body” replicates the fine details of the actual body of the car. Kyosho took a step further in scale realism.
- New design shaft drive full-time 4WD touring chassis（FZ02）.
- Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter, and battery with charger for the chassis.
- Equipped with 2-bevel grease-filled gear diffs on front and rear.
- Large size dog bones and cup joints realize superior reliability and durability.
- Belt mounting battery compartment allows various battery types to be used.
- Full ball bearings that reduce drive loss equipped throughout the drive system.
- Features KS202W waterproof steering servo.
- Includes completely finished body with color scheme and decals applied.
- Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces.
- Performance can be further enhanced by installing various optional parts.

Completely new chassis realizes low center of gravity with its simple, functional design. Featuring an integrated gearbox that optimizes torsional rigidity of the main chassis, the nylon material reduces weight while improving impact resistance. Each key component has been reinforced in this simple design without upper deck.

Features a reduced number and variety of screws and parts, and consolidation of frequently used screws into the same size. Most screws are flat head screws that can be removed with a 2.0mm hex wrench for easy disassembly.

Handling factors such as bump steer and scrub radius are optimized on front suspension. Simple ball-connected steering knuckle promises reliable control movement. Interchangeable on both front and rear left-right hub carriers optimize spare parts utilization and improve maintenance efficiency.

Includes choice of two offset brake disc wheel hubs with dummy calipers (for visual styling) that provide compatibility with 190mm and 200mm body widths.

Oil shocks mark an evolutionary step up from previous models Oil shock is newly designed. Optimal front-rear geometry and balance simultaneously delivers both light handling and precise control.

Standard spur and pinion gear setting is 68T and 32T, but 9 pinion gear settings can be used from 29T – 37T to produce a wide range of gear ratio settings. The new fixed gear mesh motor mount has holes for use with each different pinion gears. Just simply mount the motor directly to the hole locations corresponding to the pinion gear. No gear mesh adjustment is necessary.

The Tundra is a full-size pickup truck sold by Toyota North America.Bearing the name of Toyota Racing Development (TRD), the off-road champion of the range is the TRD Pro. This model is based on the 2021 Toyota Tundra TRD Pro, further enhanced with an aero device and extra width from Kyosho’s original over fender.

Comes with the new powerful 550 size 14T brushed motor(G14L). The long can with Steel ring around the motor case and internal cooling fan provides efficient torque and high speeds.