FTX

THIS SET WILL ALLOY YOU TO FIT A KIMBOROUGH HIGH TORQUE SERVO SAVER TO A TT01E. YOU MAY NEED TWO M3 BOLTS TO COMPLETE.

RADIO-BATTERY-CHARGER INCLUDED!

Comes with drift wheels and tyres - swop out for Carpet Tyres and Race!

RADIO SHOWN MAY VARY*

Take to the streets with FTX’s new Banzai drift chassis. Modelled around the hugely popular FTX Vantage and Carnage platform, the Banzai brings Japanese drift styling to the entry level Ready-To-Run arena.

Featuring a 4wd shaft driven design with front and rear metal-geared differentials, the Banzai is 99% complete from the box. Blue anodized aluminium components add a little style to the chassis along with the functionality of oil filled adjustable shock absorbers, front CVA universal driveshafts, ball bearings, adjustable suspension turnbuckles for tuning and a centre drive slipper to protect the transmission.

A waterproof electronic speed control, servo and receiver allow for use in a wide range of conditions and the 2.4ghz radio provides interference free signal no matter where you are.

Topped off and finished with an S15 style pre-printed drift body and a hard compound drift tyre on scale finish wheels, the Banzai is the perfect introduction to sideways street action!

FEATURES

• RTR with Etronix 2.4ghz Radio System
• Waterproof receiver
• Waterproof brushed motor speed control
• Waterproof steering servo
• 550 brushed motor
• Voltz 1800mah 7.2v NiMh battery
• Wall charger for battery
• Moulded tub chassis
• 4wd shaft drive with slipper system
• Big bore oil filled adjustable shocks
• Gearbox metal crown and pinion gear
• Front universal driveshafts
• Adjustable turnbuckles
• Adjustable suspension (droop, camber, toe-in & wheelbase)
• Foam front bumper
• Scale finished wheels
• Drift tyres

SPECIFICATIONS

Length: 440mm
Width: 195mm
Height: 130mm
Wheelbase: 255mm - 256mm
Front Tyre: 24 x 60mm
Rear Tyre: 24 x 60mm
Gear Ratio: 6.5:1

FTX - EVO30 (BMW E3) FRONT & REAR BODY ACCESSORIES FTX - FTX10579 (To fit FTX1057BK & R Pre painted Bodies)

The Vantage was FTX’s first move into Ready-To-Run RC models and has continued to be one of the most popular in the range ever since.

Despite this we thought it was time to give it a small facelift by introducing the Vantage 2.0 which features a new paint scheme for the body and wing, along with black wheels for a more racey look. The latest Etronix radio is included, along with a 60A waterproof brushed speed control and USB charger.

The same 4wd shaft drivetrain features metal diff gears and front universal driveshafts, while an integrated slipper helps protect the drive from possible damage.

With adjustable turn buckles all round and large bore oil filled shock absorbers the Vantage Brushed is raring to go at a truly amazing price.

In addition if you want to tune and upgrade your Vantage Brushed, FTX provide a wide range of carbon and aluminium upgrades that will bring your ride up to a whole new pro level.

Features

• 2.4Ghz Etronix Radio
• 60A waterproof ESC for NiMh/LiPo
• 550 brushed motor
• Waterproof 3kg steering servo
• Voltz 1800mAh 7.2v NiMH battery
• USB charger for battery
• New Graphic painted body & wing
• Moulded tub chassis
• 4wd shaft drive with slipper system
• Unique gearbox design for low CG
• Lightweight high impact arms
• Big bore oil filled adjustable shocks
• Gearbox metal crown & pinion gear
• Front universal driveshafts
• Adjustable turnbuckles
• Fully adjustable suspension including, droop, camber, toe-in, wheelbase etc
• Slipper for drivetrain damage protection
• Chassis accepts NiMh or LiPo battery

Declaration of Conformity

FTX5533B Declaration of Conformity

FTX MEDIUM FOAM PIT MAT (600x400MM, 2MM THICK)

Pre-painted bodyshell for the FTX Bugsta buggy.

RADIO-BATTERY-CHARGER INCLUDED!

Comes with Drift Wheels and Tyres -Swop for Carpet Tyres and Race!

Take to the streets with FTX’s new Banzai drift chassis. Modelled around the hugely popular FTX Vantage and Carnage platform, the Banzai brings Japanese drift styling to the entry level Ready-To-Run arena.

Featuring a 4wd shaft driven design with front and rear metal-geared differentials, the Banzai is 99% complete from the box. Blue anodized aluminium components add a little style to the chassis along with the functionality of oil filled adjustable shock absorbers, front CVA universal driveshafts, ball bearings, adjustable suspension turnbuckles for tuning and a centre drive slipper to protect the transmission.

A waterproof electronic speed control, servo and receiver allow for use in a wide range of conditions and the 2.4ghz radio provides interference free signal no matter where you are.

Topped off and finished with an S15 style pre-printed drift body and a hard compound drift tyre on scale finish wheels, the Banzai is the perfect introduction to sideways street action!

FEATURES

• RTR with Etronix 2.4ghz Radio System
• Waterproof receiver
• Waterproof brushed motor speed control
• Waterproof steering servo
• 550 brushed motor
• Voltz 1800mah 7.2v NiMh battery
• Wall charger for battery
• Moulded tub chassis
• 4wd shaft drive with slipper system
• Big bore oil filled adjustable shocks
• Gearbox metal crown and pinion gear
• Front universal driveshafts
• Adjustable turnbuckles
• Adjustable suspension(droop, camber, toe-in & wheelbase)
• Foam front bumper
• Scale finished wheels
• Drift tyres

SPECIFICATIONS

Length: 440mm
Width: 195mm
Height: 130mm
Wheelbase: 255mm - 256mm
Front Tyre: 24 x 60mm
Rear Tyre: 24 x 60mm
Gear Ratio: 6.5:1

ARMS - 2pc

FTX CARNAGE 2.0 1/10 BRUSHED TRUCK 4WD RTR - BLUE

Since it’s release over six years ago the FTX Carnage has become a huge favourite with beginners looking for an affordable entry into the world of R/C. Well we thought it was about time this fan favorite had a face lift with the Carnage 2.0. Two new bodyshell schemes and colours, chrome plated wheels, Etronix 3ch radio and a new 60amp rated brushed esc means the Carnage legacy is set to continue for a long time to come!

Features

• 2.4Ghz Etronix Radio
• 60A waterproof ESC for NiMh/LiPo
• 550 brushed motor
• Waterproof 3kg steering servo
• Voltz 1800mAh 7.2v NiMH battery
• Wall charger for battery
• New Blue Graphic Truck Body
• Moulded tub chassis
• 4wd shaft drive with slipper system
• Unique gearbox design for low CG
• Lightweight high impact arms
• Big bore oil filled adjustable shocks
• Gearbox metal crown & pinion gear
• Front universal driveshafts
• Adjustable wheelbase
• Adjustable turnbuckles
• Fully adjustable suspension including, droop, camber, toe-in, wheelbase etc
• Slipper for drivetrain damage protection
• Chassis accepts NiMh or LiPo battery
• Chrome plated wheels & block tyres

Specifications

Length: 415mm
Width: 328mm
Height: 156mm
Wheelbase: 290/295mm
Tyre: ø 120 x 60mm
Gear Ratio: 11.2:1

SET (4PC)

The FTX brushless Vantage, initially introduced nearly 15 years ago, has maintained enduring popularity in the r/c buggy marketplace ever since. FTX have now updated it with a variety of new features along with a lower price point, to solidify its position as the best value 1/10th brushless buggy available.

Now equipped with a new, longer chassis, stylish split 6-spoke wheels and a modern, race inspired cab-forward body, the 2.0 now accommodates the same Etronix 3.0 50Amp brushless speed control as used in the Carnage truck for refined power delivery and drivability. As before a 2950Kv brushless motor and Voltz 2S Lipo battery complete the power package for awesome straight-line speeds and extended runtimes.

A new aluminium top deck adds additional strength and bracing to the chassis assembly, while anodized cast aluminium suspension braces front and rear provide improved durability. Updated length springs and big bore, long travel oil filled shock absorbers provide improved damping while double wishbone suspension looks after each corner. Transmission employs front and rear differentials with metal bevel, crown and pinion output gears to manage that lipo powered, brushless speed and torque.

Don’t forget as well, FTX provide a comprehensive selection of additional aftermarket components to further enhance the Vantage Brushless 2.0 buggy!

Features

• 99% Ready-to-run.
• Etronix Pulse 4ch 2.4ghz Radio System.
• Etronix Photon KV2950 Brushless Motor.
• Etronix Photon 3.0 50A Brushless Speed Control.
• Etronix Waterproof 3kg Steering Servo.
• Etronix LiPo Balance Charger.
• Voltz 2S 3250mAH LiPo Battery.
• Voltz LiPo Charge Sack.
• Big bore oil filled adjustable shock absorbers.
• Gearbox metal crown & pinion gear.
• Front and rear geared differentials.
• Front universal CVA driveshafts.
• Adjustable turnbuckles.
• Fully adjustable suspension including, droop, camber, toe-in, wheelbase etc.
• Slipper for drivetrain damage protection.
• Moulded tub chassis w/Aluminium Top Deck.
• 4wd shaft drive.
• Unique gearbox design for low CG.
• Lightweight high impact arms.
• Wide range of option parts available.

Specifications

Length: 415mm
Width: 255mm
Height: 156mm
Wheelbase: 290/295mm
Rear Tyre: ø 88 x 39mm
Front Tyre: ø 88 x 34mm
Gear Ratio: 8.3:1
Weight (Inc. Battery): 1782g

FTX GRAND APACHE 1/7 BRUSHLESS 8S TROPHY TRUCK - 

Requires Batteries and Charger to Complete!

There are not many greater challenges of man and machine than the iconic Baja 1000. Raced over the brutal terrain of the deserts of the California Peninsula in Mexico, the event is a thrilling off-road experience for drivers and fans alike.

The trucks that compete in the Baja 1000 are marvels of engineering, designed to withstand the harsh conditions of the race. With powerful engines, reinforced chassis, and advanced suspension systems, these vehicles are built to conquer the treacherous desert landscape.

It is this spirit that FTX has tried to capture with the 1/7th scale Grand Apache, offering RC enthusiasts a chance to emulate their heroes and experience a piece of the Baja 1000 from their own backyard. Whether racing against friends or tackling tough terrain on a solo mission, the Grand Apache embodies the essence of off-road racing and brings the thrill of desert truck racing to life in a smaller, yet equally exhilarating, format.

Just like its full-sized brothers, it’s all about power and the Grand Apache utilises the latest Hobbywing 8S rated 160A brushless speed control and 4274 kv1250 motor for potentially breakneck speeds. A 25kg rated metal geared steering servo along with the option to take advantage of the gyro receiver helps you stay in control.

Inspired by desert trophy trucks, the Grand Apache features numerous semi-scale features and details. Factory fitted LED front headlights and grill LED light bar, along with a roll cage mounted light bar help illuminate the way, whilst a rear light bar kicks in under braking. If you suffer a flat or blow out then two full function spare tyres mount to a sturdy rear roll cage assembly that also displays fire extinguishers, shock reservoirs, and engine cooling fans. Inside a detailed cockpit with driver, navigator and dashboard.

Internal wheel well fenders and side guards protect the chassis from debris, whilst front and rear super-duty bumpers and skid plates protect the chassis from impacts and heavy landings. Furthermore, if you are a little trigger happy, inset wheelie wheels in the rear skid plate assembly will help you keep control.

A heavy-duty aluminium main chassis and front to rear top brace protects where possible from flex and impacts. CNC 7075 T6 aluminium heavy-duty machined shock towers feature front and rear and are the mounting points for big bore, oil filled dual shock absorbers operating on each corner. CNC 7075 aluminium servo saver, motor mount, centre diff case and suspension mounting blocks also come fitted as standard.

Unlike the full-sized trucks, the Grand Apache utilises traditional double arm suspension set-up front and rear for better handling and cornering at scale speeds, with race proven pivot ball, multi-adjustable front suspension, front and rear anti-roll bars and shaped lower arms for a smooth underside, max ground clearance and strength. A weighty model like the Grand Apache needs damping to match so dual CNC aluminium front & rear shock absorbers soak up the rough stuff with ease.

If you want to experience semi-scale performance then the 1/7th scale Grand Apache awaits.

Features

• 90% Ready-To-Run
• Etronix 2.4ghz Radio System
• Hobbywing 4274 kv1250 Brushless Motor
• Hobbywing 160A 8S Rated Brushless SpeedControl
• Etronix 25kg Rated Brushless Steering Servo
• Aluminium Low C of G Chassis Design
• CNC Aluminium 7075 T6 Front & Rear ShockTowers
• CNC Aluminium Centre DiUerential Case
• CNC Aluminium Servo Saver System
• CNC Aluminium Motor Mount
• CNC Aluminium Servo Horn
• CNC Aluminium Suspension Mounts
• Rear Bumper Integrated Wheelie Bar
• Inner Chassis Guards and Wheel Fenders
• CNC Aluminium Front & Rear Dual ShockAbsorbers
• Aluminium Centre Chassis Brace
• Front and Rear Anti-Roll Bars
• Waterproof Receiver Box
• Inner Belted Tyres for Improved Stability
• Realistic LED Roof Bars and Headlights
• Detailed Scale Bodyshell with Driver Interior
• Moulded Roll Cage with Detail Accessories and Full Function Spare Tyres

Required To Complete

• 2 x 2S or 4S Battery & Charger

FTX VANTAGE / CARNAGE / OUTLAW / BANZAI ESC WATERPROOF BRUSHED

An affordable brushed ESC that is used in the FTX Vantage/Carnage/Outlaw and Banzai.

This ESC is setup in a simple way for ease of operation. When the ESC is switched on it automatically searches for the neutral point. When the automatic setup is finished the motor sends out “Do” “Re” “Me” indicating the neutral point is set and it is ready to be operated.

The ESC has 2 programmable running modes and a Low voltage protection mode that can be enabled for LiPo batteries.

FTX Vantage/Carnage/Outlaw/Banzai Brushed WP ESC Features:

• Waterproof protection
• 5-6 cell NiMH compatibility
• 7.2-7.4V 2S Li-Po compatibility
• Li-Po Safety cut off when less than 6V
• Thermal Protection: When more than 90°C
• BEC Output: 5.6V 2A
• Small foot print for easy mounting
• Dimensions: 30mm x 28mm x 22mm
• Weight: 38g

PRE PAINTED - WILL FIT MOST 190MM CARS WITH OFFSET WIDER WHEELS 

SHOULD BE 195MM WIDE BY 256MM WHEELBASE (NOT CONFIRMED BUT SUGGESTED)

LIGHTS, MIRRORS AND SPOILER NOT INCLUDED - SOLD SEPERATELY 

FTX BUZZSAW XTREME 1/12 ATV VEHICLE w/EXHAUST - BLUE

The ultimate combination of trail vehicle and tank just got extreme with the latest Buzzsaw Xtreme Edition!

Buzzsaw drives like a car and can rotate 360° for swift direction changes thanks to its unique planetary gear, double motor wave box that enables the tracks to move in opposite directions when turning for a smoother ‘car like’ driving experience.

Tracks complete with shock absorbing independent suspension and a raised centre cockpit enables you to drive through shallow puddles (up to 5cm depth) and over obstacles with ease, as well as conquer gradients of up to 30°.

The Xtreme edition features a bank of roof LED spotlights, bumper lights, and taillights for after dark adven-tures, along with a realistic, LED lit rear exhaust that converts water into steam via an internal element. All controlled from a simple button on the transmitter for the coolest effect going!

With diecast metal body panels for added robustness, this Buzzsaw is ready for you to take things to the Xtreme!

Features

• 99% Ready-To-Run
• 2.4ghz radio system
• LED Spot Lights and bumper lights
• Water Exhaust Effect
• Diecast Allloy body panel
• 7.4V Li-Ion 1200mAh Battery
• USB Charger
• Rubber Tracks
• Independent suspension
• Double-Motor Wavebox
• 360° Rotation
• Climb upto 30° gradients
• Max Speed 12kph
• 34.3 x 17.4 x 14.5cm size

FTX HAVOK 1/14 4WD DRIFT TRUCK - BLUE

Ready to wreak Havok with FTX’s latest addition? On road drift and street fans will love the Havok as they test their skills with donuts, figure of eights and some opposite lock cornering. This 1/14th scale Ready-to-Run model features a steering gyro to help make everyone an expert at side-ways driving, no matter the ability.

A fully proportional throttle and steering servo provide smooth and accurate control, while a shaft driven 4wd drivetrain, front and rear geared differentials, all supported by precision ball bearings handle the power from the 390 sized brushed motor and 2S 7.4V Li-Ion battery pack.

LED’s light strips mounted to either side of the moulded tub chassis illuminate the ground below for that street race vibe.

The slammed Drift Truck body features a moulded rear roll bar should the worst happen and a rear moulded spoiler for that all important downforce.

Get ready to be fast and furious with the new Havok from FTX!

Features

• 99% Ready-To-Run
• 2.4ghz Radio System
• Fully Proportional Throttle & Steering
• Splashproof Speed Control w/Gyro Feature
• Splashproof 2.2kg Rated Steering Servo
• RC390 Brushed Motor w/Heatsink
• Front & Rear Geared Differentials
• Coil Sprung Shock Absorbers
• Double Wishbone Suspension
• Front Universal Driveshafts
• Low Friction Ball Bearings
• Li-Ion 7.4V 1500mAH Battery Pack
• USB Charger
• Chassis LED Side Lights
• Scale Styled Rear Chassis Diffuser
• Drift Street Truck Body w/Roll Bar & Spoiler

Specifications

Length: 342mm
Width: 147mm
Height: 106mm

FTX BUZZSAW 1/12 ALL TERRAIN TRACKED VEHICLE - CAMO

The FTX Buzzsaw is a combination of trail vehicle and tank for the ultimate off road fun! Buzzsaw drives like a car and can rotate 360° for swift direction changes thanks to its unique planetary gear, double-motor wave box that enables the tracks to move in opposite directions when turning for a smoother ‘car like’ driving experience.

Tracks complete with shock absorbing independent suspension and a raised centre cockpit enables you to drive through shallow puddles (up to 5cm depth) and over obstacles with ease, as well as conquer gradients of up to 30°.

Rooftop LED’s light the way for any night time running, while the opening gull wing doors and internal cockpit add a touch of scale realism.

Get ready to enjoy the latest craze in surface vehicles - Buzzsaw!

Features

• 2.4ghz radio system
• Three colour choices
• 7.4V Li-Ion 1200mAh Battery
• USB Charger
• Rubber Tracks
• Independent suspension
• Double-Motor Wave box
• Opening gull-wing style doors
• 360° Rotation
• Climb up to 30° gradients
• Max Speed 12kph
• 34.3 x 17.4 x 14.5cm size

Appears to be in working order, but will need some rear drives shafts to return to 4WD. 

only electrics this truck has is a 540 brushed motor. 

has Schumacher RiB racing tyres fitted 

FTX B4X 4WD RACE BUGGY ROLLER CHASSIS

Race-Bred Performance. Ready to Compete.

FTX is proud to introduce the all-new B4X 1/10 4WD Buggy Roller, a high-performance competition-inspired platform designed for drivers looking to step into serious off-road racing without the premium race-kit price tag.

Built around a lightweight yet durable 7075-T6 aluminium chassis, the B4X Roller combines proven race-buggy design principles with premium components throughout. From its three-differential shaft-driven transmission to its carbon fibre shock towers and CNC-machined aluminium suspension hardware, every aspect of the B4X has been engineered to deliver precision handling, durability and tunability on a wide variety of track surfaces.

The shaft-driven 4WD drivetrain features front, centre and rear metal geared differentials with internal steel satellite gears, delivering excellent traction and power distribution under all conditions. Front and rear CVA universal driveshafts, rubber-sealed ball bearings and anti-roll bars further enhance performance, while CNC aluminium suspension hangers with adjustable inserts allow racers to fine-tune geometry settings including toe-in, anti-squat, roll centre, kick-up and track width.

Large-bore hard-anodised aluminium oil shocks and carbon fibre shock towers provide exceptional damping and chassis control, helping the B4X remain composed over rough terrain, jumps and demanding race surfaces.

Ready to accept your choice in the latest electronics and power packages, the B4X Roller can be specked just the way you want. Just paint the 1mm polycarbonate body and rear wing in your colours, install your power package and the B4X is ready to deliver at the track.

Whether you’re upgrading from an entry-level buggy or searching for a capable club-racing platform, the FTX B4X offers an impressive combination of performance, adjustability and value in a near-ready-to-run package.

Features

Competition Chassis & Drivetrain

• Shaft-driven 4WD transmission.
• Front, centre and rear metal geared differentials.
• Internal steel differential satellite gears.
• Full rubber-sealed ball bearings throughout.
• Front and rear CVA universal driveshafts.
• CNC aluminium centre differential mount.
• Sliding CNC aluminium motor mount for easy gear adjustments.
• 12mm aluminium wheel hexes.

Premium Construction

• 2.5mm 7075-T6 aluminium chassis.
• Carbon fibre front & rear shock tower.
• CNC aluminium front & rear suspension mounts.
• Clear 1mm polycarbonate body and wing.
• FTX decals

Suspension & Handling

• CNC large-bore hard-anodised aluminium shock absorbers.
• Adjustable suspension geometry.
• Variable pill inserts for:
  - Toe-in adjustment.
  - Anti-squat adjustment.
  - Roll centre adjustment.
  - Kick-up adjustment.
  - Track width adjustment.
• Front and rear anti-roll bars.
• Adjustable turnbuckles.
• C-Hub front steering system.

Specifications

Scale: 1/10
Length: 385mm
Width: 250mm
Height: 146mm
Wheelbase: 278mm
Ground Clearance: 25mm
Gear Ratio: 8.7:1
Weight: 1600g (without battery)

Required To Complete

• Radio System
• Speed Control
• Motor
• Servo
• 2S/3S Shorty LiPo battery
• LiPo balance charger
• Wheels and Tyres
• Paint for body

FTX CARNAGE 2.0 1/10 BRUSHED TRUCK 4WD RTR - RED

Since it’s release over six years ago the FTX Carnage has become a huge favourite with beginners looking for an affordable entry into the world of R/C. Well we thought it was about time this fan favorite had a face lift with the Carnage 2.0. Two new bodyshell schemes and colours, chrome plated wheels, Etronix 3ch radio and a new 60amp rated brushed esc means the Carnage legacy is set to continue for a long time to come!

Features

• 2.4Ghz Etronix Radio
• 60A waterproof ESC for NiMh/LiPo
• 550 brushed motor
• Waterproof 3kg steering servo
• Voltz 1800mAh 7.2v NiMH battery
• Wall charger for battery
• New Red Graphic Truck Body
• Moulded tub chassis
• 4wd shaft drive with slipper system
• Unique gearbox design for low CG
• Lightweight high impact arms
• Big bore oil filled adjustable shocks
• Gearbox metal crown & pinion gear
• Front universal driveshafts
• Adjustable wheelbase
• Adjustable turnbuckles
• Fully adjustable suspension including, droop, camber, toe-in, wheelbase etc
• Slipper for drivetrain damage protection
• Chassis accepts NiMh or LiPo battery
• Chrome plated wheels & block tyres

Specifications

Length: 415mm
Width: 328mm
Height: 156mm
Wheelbase: 290/295mm
Tyre: ø 120 x 60mm
Gear Ratio: 11.2:1

FTX ZORRO 1/10 TROPHY TRUCK EP BRUSHED 4WD RTR - BLUE

Fans of electric power can now enjoy the semi-scale realism and cool r/c driving experience of the Zorro with this new brushed electric edition. Featuring trailing link rear suspension just like the desert trophy trucks racing in the New Mexico deserts, the Zorro is one awesome package for any fan of extreme trucks.

For something a little different we have added a bit of colour to the Zorro EP, with some blue moulded suspension parts and roll cage accessories, just to liven things up a little instead of bland old black!

This full featured brushed truck is a perfect entry in to 1/10th scale r/c and represents great value with a 60A speed control, Etronix radio system and Voltz 1800mAh battery pack. Not to mention the blue anodised aluminium shock absorbers front and rear, metal differential and crown gears and sealed 4wd shaft drive tranmission.

Get ready to hit the rough stuff and watch the Zorro soak's it up like a champ!

Features

• 99% Ready-to-run
• Etronix 3ch 2.4ghz radio
• Etronix waterproof 3kg steering servo
• 60A Waterproof speed control for NiMh/LiPO
• 550 Brushed motor
• Voltz 1800mAh NiMH 7.2v Battery
• USB Charger
• Pre-painted Trophy Truck bodyshell
• Tubular style internal roll cage w/spare tyre
• Tubular front bumper with skid plate
• Internal driver cockpit
• Moulded tub chassis
• Sealed transmission
• 4wd shaft drive
• Trailing arm rear link suspension
• Receiver box
• Lightweight high impact arms
• Alum. big bore oil filled adjustable shocks
• Gearbox metal crown & pinion gear
• Front universal driveshafts
• Adjustable turnbuckles
• Fully adjustable suspension including, droop, camber, toe-in
• Chassis accepts NiMh or LiPo battery
• Wide range of option parts available

FTX KHAOS 1/10 BRUSHLESS 4WD TRUGGY RTR WITH 3S LIPO AND CHARGER - BLUE

Get Set for some mayhem and madness with the Khaos, the latest 3S LiPo brushless-powered off-road truggy from FTX.

Blending affordability, specification and tunability, the Khaos is perfect for anyone stepping up from brushed models or wanting more performance beyond a regular 2S truck. With an oversized footprint, the Khaos is larger than a traditional 1:10 scale vehicle and features the latest Etronix 80A brushless speed control and 3665 2100Kv motor. Paired with a 3S 3300mAh LiPo battery, straight-line speeds are exciting while remaining controllable and easy to drive.
With the inclusion of the latest compact Etronix EX4M radio, a 9kg-rated metal-geared steering servo, balance charger and Voltz LiPo charge-safe sack, you have a high-spec package ready to go straight out of the box.

Front, rear and centre geared differentials with metal gears provide smooth power transfer through front and rear universal driveshafts, finished with aluminium wheel hexes. A heavy-duty moulded tub chassis houses all components, while the updated geometry rear shock tower supports new heavy-duty body mounts.
Oil-filled shock absorbers are configured to soak up the terrain at each corner, while aluminium suspension hanger mounts secure the double wishbone suspension.
Khaos by name chaos by nature, this brushless supersized 1:10 truggy is ready to deliver thrills and spills in abundance.

Features

• 99% Ready-To-Run.
• Etronix EX4M 4ch 2.4ghz Radio.
• Etronix Photon Waterproof 80A Brushless ESC.
• Etronix Photon 3665 2100kv Brushless Motor.
• Etronix 9KG MG Waterproof Steering Servo.
• Etronix PowerPal Balance Charger.
• Voltz 3300mAh 3S LiPo Battery.
• Voltz LiPo Charge Sack.
• Front, rear and centre geared differentials with metal gears.
• Moulded tub chassis.
• Aluminium upper plate.
• 4WD shaft drive.
• Unique gearbox design for low CG.
• Lightweight high impact arms.
• Big bore oil filled adjustable shocks.
• Gearbox metal crown & pinion gear.
• Front and rear universal driveshafts.
• Adjustable wheelbase.
• Adjustable turnbuckles.
• Fully adjustable suspension including, droop, camber, toe-in, wheelbase etc.
• Front and Rear Alloy Suspension Mounts.
• Receiver Box.
• Aggressive Body Styling.
• Full Ball Bearings.
• Wide range of option parts available.

ARMS - 2pc