FTX Electric Off-Road Buggies

Noise, Smell And Power – The Nitro Khaos Is Here!

For those who believe an RC car should sound as exciting as it looks, the Nitro Khaos brings internal combustion power to the Khaos platform. At its heart sits an SH .21 (3.48cc) pull-start 2-stroke engine, delivering the sound, smell, excitement and hands-on experience that only a nitro-powered RC car can provide.

Factory assembled with the engine and polished aluminium tuned pipe and manifold fitted, Etronix EX4M 2.4GHz radio system installed and aggressive body fully finished, the Nitro Khaos arrives 99% Ready-To-Run. Add your transmitter batteries, nitro fuel, fuel bottle and glow starter and you'll soon have the Khaos fired up and leaving its distinctive vapour trail in its wake.

Beneath the body, a tough 3mm 6061/T6 aluminium main chassis provides the foundation for a rugged 4WD shaft-driven transmission. Front and rear geared differentials feature metal gears, while metal crown and pinion gears, front and rear universal CVA driveshafts and 12mm aluminium wheel hexes help transfer the engine's power to the ground. Front and rear centre chassis braces add further support, while the unique gearbox layout is designed to keep the centre of gravity low.

A 3-shoe clutch provides smooth engagement as the revs rise, with the polished aluminium tuned pipe and manifold helping the SH .21 deliver its characteristic nitro power band. A generous 125cc fuel tank provides longer running between refills, while dual disc brakes provide the stopping power when it's time to rein the Khaos back in.

The balanced chassis layout positions the engine and fuel tank opposite the enclosed receiver box and aluminium servo tray, with an Etronix 9kg metal-geared waterproof steering servo providing strong and dependable steering control.

Long-travel suspension and adjustable big-bore oil-filled shock absorbers give the Nitro Khaos plenty of ability when the terrain gets rough. Lightweight high-impact suspension arms are joined by aluminium front and rear suspension mounts, while adjustable upper suspension and steering turnbuckles allow the set-up to be fine-tuned to suit the conditions.

There's plenty of adjustability built into the chassis too, including droop, camber, toe-in and wheelbase, while full ball bearings throughout help keep the drivetrain running freely. The high-impact front bumper is even ready to accept an optional LED light set for those who want to add another dimension to their Khaos.

If you're a fan of real engines and the noise, smell, tuning and mechanical involvement that comes with them, the Nitro Khaos is calling.

Features

• 99% Ready-To-Run.
• Etronix EX4M 4ch 2.4ghz Radio.
• Etronix 9KG MG Waterproof Steering Servo.
• SH.21 (3.48CC) Size Pull Start Engine.
• Polished aluminium tuned pipe and manifold.
• 3-Shoe clutch.
• 125cc fuel tank.
• Dual disc brakes.
• Front and rear geared differentials with metal gears.
• Blue anodised 6061/T6 aluminium 3mm main chassis.
• Blue anodised aluminium servo tray.
• Blue anodised front and rear alloy suspension mounts.
• 4WD shaft drive.
• Front and rear centre chassis braces.
• Unique gearbox design for low CG.
• Lightweight high impact arms.
• Big bore oil filled adjustable shocks.
• Gearbox metal crown & pinion gear.
• Front and rear universal CVA driveshafts.
• Adjustable upper link turnbuckles.
• Fully adjustable suspension including, droop, camber, toe-in, wheelbase etc.
• Receiver Box.
• Aggressive Body Styling.
• Full Ball Bearings.
• Wide range of option parts available.

Required To Complete

• 4 x AA Batteries
• Nitro Fuel
• Fuel Bottle
• Glowplug Starter

Specification

Length: 485mm
Width: 340 mm
Height: 175mm
Wheelbase: 325mm
Tyres: Φ120x70mm
Gear Ratio: 9.7:1
Weight: 3000g

Get Set for some mayhem and madness with the Khaos, the latest 3S LiPo brushless-powered off-road truggy from FTX.

Blending affordability, specification and tunability, the Khaos is perfect for anyone stepping up from brushed models or wanting more performance beyond a regular 2S truck. With an oversized footprint, the Khaos is larger than a traditional 1:10 scale vehicle and features the latest Etronix 80A brushless speed control and 3665 2100Kv motor. Paired with a 3S 3300mAh LiPo battery, straight-line speeds are exciting while remaining controllable and easy to drive.
With the inclusion of the latest compact Etronix EX4M radio, a 9kg-rated metal-geared steering servo, balance charger and Voltz LiPo charge-safe sack, you have a high-spec package ready to go straight out of the box.

Front, rear and centre geared differentials with metal gears provide smooth power transfer through front and rear universal driveshafts, finished with aluminium wheel hexes. A heavy-duty moulded tub chassis houses all components, while the updated geometry rear shock tower supports new heavy-duty body mounts.
Oil-filled shock absorbers are configured to soak up the terrain at each corner, while aluminium suspension hanger mounts secure the double wishbone suspension.
Khaos by name chaos by nature, this brushless supersized 1:10 truggy is ready to deliver thrills and spills in abundance.

Features

• 99% Ready-To-Run.
• Etronix EX4M 4ch 2.4ghz Radio.
• Etronix Photon Waterproof 80A Brushless ESC.
• Etronix Photon 3665 2100kv Brushless Motor.
• Etronix 9KG MG Waterproof Steering Servo.
• Etronix PowerPal Balance Charger.
• Voltz 3300mAh 3S LiPo Battery.
• Voltz LiPo Charge Sack.
• Front, rear and centre geared differentials with metal gears.
• Moulded tub chassis.
• Aluminium upper plate.
• 4WD shaft drive.
• Unique gearbox design for low CG.
• Lightweight high impact arms.
• Big bore oil filled adjustable shocks.
• Gearbox metal crown & pinion gear.
• Front and rear universal driveshafts.
• Adjustable wheelbase.
• Adjustable turnbuckles.
• Fully adjustable suspension including, droop, camber, toe-in, wheelbase etc.
• Front and Rear Alloy Suspension Mounts.
• Receiver Box.
• Aggressive Body Styling.
• Full Ball Bearings.
• Wide range of option parts available.

Mixing classic desert trophy truck finish with a .18 pull start nitro engine, the FTX Zorro is the perfect blend of speed, noise and semi-scale realism.

Factory assembled with waterproof servos and a 2.4ghz radio system, the Zorro’s shaft 4wd drivetrain, along with metal geared front and rear differentials is ready to handle the excitement that only a nitro engine can deliver.

Front and rear fully independant suspension features oil filled shock absorbers, adjustable turnbuckles and anti-roll bars for fine tuning. Flexible front and rear wide tubular style bumpers and skid plates protect, while the pre-printed bodyshell covers an internal roll cage and driver cockpit.

Mounted to a 3mm anodised aluminium chassis, the Force .18 pull start engine fitted with a 3-shoe clutch and 2-piece composite tuned pipe deliv- ers great power and performance making it the ideal choice for anyone looking to sample some nitro r/c.

Get ready to fuel up and start your engines!

Features

• Etronix 2.4ghz 3ch radio
• Semi-scale Trophy Truck bodyshell
• Internal roll cage and driver interior
• Scale styled wheels and tyres
• Waterproof 3kg steering and throttle servo
• FORCE .18 pull start nitro engine
• Composite 2-piece tuned pipe
• 3-shoe clutch
• Blue anodised aluminium chassis parts
• Front and rear chassis braces
• 4wd shaft drive
• Unique gearbox design for low CG
• Radio box
• Lightweight high impact arms
• Big bore oil filled adjustable shock absorbers
• Gearbox metal crown & pinion gear
• Front and rear geared differentials
• Front universal driveshafts
• Adjustable turnbuckles
• Fully adjustable suspension including, droop, camber, toe-in, wheelbase etc
• Front & Rear Tubular bumpers and skid plates

Specifications

Length: 510mm
Width: 295mm
Height: 195mm
Wheelbase: 329mm

Required to Complete

• 12 x AA Batteries, Fuel, Fuel Bottle and Glow Starter

Declaration of Conformity

FTX5542O Declaration of Conformity

Take to the streets with FTX’s new Banzai drift chassis. Modeled around the hugely popular FTX Vantage and Carnage platform, the Banzai brings Japanese drift styling to the entry level Ready-To-Run arena.

Featuring a 4wd shaft driven design with front and rear metal-geared differentials, the Banzai is 99% complete from the box. Blue anodized aluminium components add a little style to the chassis along with the functionality of oil filled adjustable shock absorbers, front CVA universal driveshafts, ball bearings, adjustable suspension turnbuckles for tuning and a centre drive slipper to protect the transmission.

A waterproof electronic speed control, servo and receiver allow for use in a wide range of conditions and the 2.4ghz radio provides interference free signal no matter where you are.

Topped off and finished with an S15 style pre-printed drift body and a hard compound drift tyre on scale finish wheels, the Banzai is the perfect introduction to sideways street action!

Features

• RTR with Etronix 2.4ghz Radio System
• Waterproof receiver
• Waterproof brushed motor speed control
• Waterproof steering servo
• 550 brushed motor
• Voltz 1800mah 7.2v NiMh battery
• Wall charger for battery
• Moulded tub chassis
• 4wd shaft drive with slipper system
• Big bore oil filled adjustable shocks
• Gearbox metal crown and pinion gear
• Front universal driveshafts
• Adjustable turnbuckles
• Adjustable suspension(droop, camber, toe-in & wheelbase)
• Foam front bumper
• Scale finished wheels
• Drift tyres

Specifications

Length: 440mm
Width: 195mm
Height: 130mm
Wheelbase: 255mm - 256mm
Front Tyre: 24 x 60mm
Rear Tyre: 24 x 60mm
Gear Ratio: 6.5:1

Declaration of Conformity

FTX5529 Declaration of Conformity

Get ready to turn heads on the strip and streets with FTX’s brushless powered 1/7th on road 4WD, Supaforza GT. Fusing muscle with style, the Supaforza is ready to deliver an on-road, street racing experience like never before.

Modelling an aggressively styled scale bodyshell that features moulded scale accessories such as front grill, side mirrors, rear spoiler, head and taillight lenses for realistic LED lighting system and oversized rear tyres, the Supaforza GT is ready to live up to its supercar billing.

Under the hood, a Hobbywing 150Amp speed control and 2000kv 4274 4-pole brushless motor are ready to link up with your choice of 4S or 6S LiPo battery power, for some rubber burning street runs. With speed you need control and with channelled chassis side guards and a rear diffuser for ground effects, coupled with Fastrax F-Zero high traction tyres that are internally belted to stop expansion under power, using a wider rear footprint, high speed stability is assured.

A robust, shaft drive, 3-differential drivetrain, featuring heavy-duty steel gears and spiral-tooth diff gears and front universal front CVD driveshafts are ready for you to apply the power. At these speeds it’s impossible to cover everything, but a 3mm thick aluminium chassis, CNC 6061 T6 machined aluminium front and rear towers, aluminium front to back chassis brace and front foam bumper are all designed to help minimise damage in the event of an off or impact.

Looking to fine tune the Supaforza’s handling for a faster run or lap time? Then you have the tools as standard with the adjustable aluminium front and rear shock absorbers that include optional spring ratings. Multiple shock absorber positions and front and rear anti-roll bars will help you dial-in your ride in no time. Whilst a 19kg metal geared servo controls the steering, you can also experiment with some sideways drift style action with the integrated, servo operated mechanical diff brake option, for some handbrake turns. Conditions a little slippery? No problem, the Etronix 2.4ghz radio system features a built-in gyro in the receiver to help you keep your Supaforza on track. Burn rubber and light up the road with the Supaforza GT!

Features

• 99% Ready-to-Run
• 2.4ghz Etronix radio w/gyro programmed RX
• Waterproof 18kg metal geared steering servo
• Hobbywing 150Amp brushless speed control
• 2000kv 4-pole 4274 brushless motor
• Chassis mounted cooling fan for motor
• Integrated mechanical brake option
• CNC Alum. 6061 T6 Front Rear Shock Towers
• CNC Aluminium Centre chassis Brace
• Pivot ball suspension
• Heavy-duty Front CVD driveshafts
• Big bore aluminium-threaded oil filled shocks
• 3mm aluminium chassis
• Moulded chassis side guards & rear diffuser
• Front foam bumper
• 3-differential shaft drive transmission
• Heavy-duty steel gears
• Spiral-tooth diff gears
• Ball bearings
• Belted Intermediate Treaded tyres
• 7-spoke wheels w/wide offset rears
• Supercar inspired body with moulded grill, mirrors, spoiler & light lenses
• Realistic front and rear LED light system

Specifications

Length: 700mm
Width: 350mm
Height: 200mm
Wheelbase: 410mm
Front Tyre: Φ43*100mm
Rear Tyre: Φ53*107mm

Required To Complete

• 4 x AA batteries
• 4S or 6S Lipo battery w/XT90 connector
• Charger

Declaration of Conformity

• FTX5494R Declaration of Conformity

It might be 4WD, but the EVO30 captures the essence of the legendary RWD supercars of the 80’s in all their glory.

Choose either the car park for sideways drift or hit the throttle for some speed runs by choosing either hard drift tyres or sticky soft treaded rubber tyres included with the EVO30.

With a wide aero inspired wide moulded main chassis featuring no screw heads, this smooth finish, coupled with a rear diffuser provides stability at speed. Shaft driven with sealed, geared front and rear differentials feature metal gears throughout for maximum durability. The modular radio tray neatly houses a 15kg Etronix metal geared steering servo and Hobbywing brushless 60A esc while the 3300KV brushless motor powered by a Voltz 2S 2500mAH Lipo battery delivers impressive straightline speed.

What’s more you can adjust the gyro enabled receiver to help fine tune your drifting and opposite lock handling at speed.
Oil filled shock absorbers, anti-roll bars and adjustable double wishbone suspension lets you tweak to suit your settings and tyre choice; either treaded rubber tyres for street racing, featuring 25mm wide front and 30mm wide rear for better stability at high speed or hard plastic boots on 6-spoke wheels for sideways drift driving.

Topped off with classic ‘80s body styling, that features a detailed moulded front grill with light lenses along with a front and rear multifunction LED light set, you just need to hit the power EVO30 style!

Features

• 99% Ready-to-run
• FTX 2.4ghz 5ch Radio System
• Etronix 3652 KV3300 Brushless Motor
• Hobbywing 60A Brushless Speed Control
• Etronix Waterproof 15kg MG Steering Servo
• Voltz 2S 30C 2500mAH LiPo Battery
• Etronix LiPo Balance Charger
• Gyro Stability Control Option
• Multifunction LED Light Box Control
• Scale finished body w/moulded accessories
• Front and Rear Anti-Roll Bars Included Rubber Street & Hard Slick Drift tyre sets i
• Front & Rear Metal Gear Sealed Differential
• Shaft driven 4WD
• Front CVD Universal Driveshafts
• Ball Bearings
• Adjustable Oil Filled Shock Absorbers
• Rear Moulded Diffuser Bumper
• Moulded wide main chassis featuring screwless base
• Quick Release Battery Holder

Specifications

Length: 438mm
Width: 200mm
Height: 130mm
Wheelbase: 260mm

Required to complete

• 4 x AA Batteries