Bittydesign

Product Features

The ARES-1 body is compatible with SupaStox and SupaStox GT plus any other 1/12 scale model in the GT12 category.

• Made with high quality and genuine polycarbonate Lexan®
• Produced in Light Weight version, thickness of material 0,75mm
• Included in the kit a complete set of screw, nuts and large plastic washers to fix properly the rear wing
• Sold clear with protective film outside
• Included in the package a decal sheet pre-cut and windows mask

This is a clear polycarbonate body parts set of the in 210mm to 225mm Wheelbase for 1/10 MTC / M-Chassis Kits

Key Features:

• Perfect Fit: Designed for a 210 to 225mm wheelbase and 165-170mm width for optimal performance and style.
• Durable Clear Lexan Construction: Lightweight yet sturdy, ensuring longevity and resilience on the track.
• Customizable: Comes with stickers (not all as shown)

Which Tamiya Chassis? (Will fit other MTC Makes)

• MB-01 (Modern/Current): This versatile, modern chassis allows for front (FWD) or rear (RWD) motor layouts, and specifically supports a 210mm wheelbase by adjusting its modular frame.
• M-08 Concept (Current RWD): A high-performance rear-midship chassis specifically designed to be assembled in S (210mm), M (225mm), or L (239mm) wheelbases.
• M-07 Concept (Current FWD): Primarily designed for 225mm/239mm, but some iterations and setups can accommodate it; however, the M-08 is generally favored for 210mm.
• MF-01X (4WD): This 4WD shaft-driven chassis can be assembled in 210mm (S), 225mm (M), or 239mm (L) configurations by adding or removing spacer parts.
• M-05 / M-05 Ver.II (Classic FWD): The standard FWD chassis for many years. It supports 210mm, 225mm, and 239mm configurations.
• M-06 (Classic RWD): Designed for rear-motor, rear-drive, it supports 210mm (S), 225mm (M), and 239mm (L).
• M-03 (Vintage FWD): The classic, older FWD M-Chassis often used in 210mm Mini Cooper kits.
• M-02 (Vintage RWD): Older rear-drive chassis.
• M-01 (Vintage 4WD/FWD): Original Mini Cooper chassis.
• XM-01 Pro (Rally 4WD): The modern 4WD rally chassis which supports three types of wheelbase.
• also Fits Carten And Louise MTX Range

Comes with window masks & stickers

Four Steps to On-Road Ready

1. Clean Body and apply included window mask
2. Paint then peel the over-spray film off
3. Sticker your body (decal sheet included)
4. Mount your new body onto your Car

This is a clear polycarbonate body parts set of the in 210mm to 225mm Wheelbase for 1/10 MTC / M-Chassis Kits

Key Features:

• Perfect Fit: Designed for a 210 to 225mm wheelbase and 165-170mm width for optimal performance and style.
• Durable Clear Lexan Construction: Lightweight yet sturdy, ensuring longevity and resilience on the track.
• Customizable: Comes with stickers (not all as shown)

Which Tamiya Chassis? (Will fit other MTC Makes)

• MB-01 (Modern/Current): This versatile, modern chassis allows for front (FWD) or rear (RWD) motor layouts, and specifically supports a 210mm wheelbase by adjusting its modular frame.
• M-08 Concept (Current RWD): A high-performance rear-midship chassis specifically designed to be assembled in S (210mm), M (225mm), or L (239mm) wheelbases.
• M-07 Concept (Current FWD): Primarily designed for 225mm/239mm, but some iterations and setups can accommodate it; however, the M-08 is generally favored for 210mm.
• MF-01X (4WD): This 4WD shaft-driven chassis can be assembled in 210mm (S), 225mm (M), or 239mm (L) configurations by adding or removing spacer parts.
• M-05 / M-05 Ver.II (Classic FWD): The standard FWD chassis for many years. It supports 210mm, 225mm, and 239mm configurations.
• M-06 (Classic RWD): Designed for rear-motor, rear-drive, it supports 210mm (S), 225mm (M), and 239mm (L).
• M-03 (Vintage FWD): The classic, older FWD M-Chassis often used in 210mm Mini Cooper kits.
• M-02 (Vintage RWD): Older rear-drive chassis.
• M-01 (Vintage 4WD/FWD): Original Mini Cooper chassis.
• XM-01 Pro (Rally 4WD): The modern 4WD rally chassis which supports three types of wheelbase.
• also Fits Carten And Louise MTX Range

Comes with window masks & stickers

Four Steps to On-Road Ready

1. Clean Body and apply included window mask
2. Paint then peel the over-spray film off
3. Sticker your body (decal sheet included)
4. Mount your new body onto your Car

BD-MP-0622 Bittydesign Permanent Marker Pen for RC bodies

Permanent marker with fine 0.6mm line.

Countless tests of various models of marker pens have led us to select the one that is particularly suitable for the creation of liveries on bodies for RC models; the tip with hardness F and the permanent black ink make our marker the first necessary tool in the creation of graphics for your body shells.

Fundamentally characteristic is the resistance of the ink to the sweat of the fingers while drawing the graphics, this is a very important aspect as there is no risk that the lines of the drawing just traced are erased while moving the body shell between the hands; further 'pro' is the quality of the tip whose width remains the same throughout the life of the marker, thus preventing the line from getting too wide as it is used.

Another very appreciable aspect is given by the fact that placing the tip on the film of the bodywork the ink stroke always "starts" immediately at the first try and therefore does not force you to waste time each time trying to start the stroke (as often happens, instead, with other markers).

BD-GT-190AS1 Bittydesign ARES-1 1/10 GT Clear 190mm Body

ARES-1 is pure performance for the 1/10 GT class. Designed with the desire to create an unconventional body thanks to highly refined and extreme aerodynamic; ARES-1 moves the performance bar to a new level.

QUALITY without any compromise is the basis of everything we make, the ARES-1 body shell represents the perfect implementation of our philosophy that drives us to do better and that encourages us to make use of our know-how acquired in over 17 years of experience.

To achieve maximum performance, we tested the body several times and made radical changes to the original design, we wanted to make sure we could offer an absolute performance product that would become the new benchmark for the GT category.

The aerodynamics of the ARES-1 will surprise you because during development we put all our experience into it and optimised every detail with the focus on maximum performance. The ease with which this body will allow you to 'push' your limits will leave you speechless every time you use it on your model.

Features:

The body shell is UNIVERSAL and mounts on all 1/10 190mm models, the wing complies with the measures as per USGT regulation and can therefore be used at any race.

• Made with high quality and genuine polycarbonate Lexan®
• Included in the kit a complete set of screw, nuts and large plastic washers to fix properly the rear wing
• Produced only in Light Weight version
• Fit all the 190mm electric chassis on the market with 257-260mm wheelbase
• Sold clear with protective film outside
• Included in the package a decal sheet pre-cut and windows mask

The bodyshell is supplied clear as part of a molding and will require cutting and painting in order to complete.

190mm Wide / 256mm Standard 1/10 Car Wheelbase body for such as a Tamiya TT02.

Supplied unpainted - and may not match design, stickers might be limited to Lights & Grills. 

THIS IS THE LIGHTWEIGHT VERSION

BD-TC-190HYP Bittydesign HYPER HR 190mm Clear TC bodyshell - Light

HYPER-HR, a new contenderbody shell contender for the 1/10 190mm electric class

This project was born from the desire to further develop the first HYPER version by creating a new model similar in appearance but in fact totally redesigned to meet the needs of this ultra-competitive category.

The HYPER-HR body represents the best result of performance and aesthetics into the same product, a great mix with modern and aggressive look.

Premium Quality first of all

Our philosophy leads us not to settle for mediocrity or speculation, for each project we always pursue the same common thread: the best or nothing. To obtain products that fully meet our expectations, we dedicate months of virtual design and rendering in order to allow us to evaluate any improvements or details to be corrected.

QUALITY without any compromise is the basis of everything we make, the HYPER-HR body shell represents the perfect implementation of our philosophy that drives us to do better and that encourages us to make use of our know-how acquired in over 15 years of experience.

Bittydesign Engineering is synonymous with guarantee, authenticity and innovation.

Product Features

The body shell complies with all EFRA, IFMAR, ROAR, BRCA and FEMCA homologation specs, so it can be used in any National and International race.

• Made with high quality and genuine polycarbonate Lexan®
• Included in the kit a complete set of screw, nuts and large plastic washers to fix properly the rear wing
• Produced in Light Weight version as well also Ultra Lite (ULT)
• Fit all the 190mm electric chassis on the market with 257-260mm wheelbase
• Sold clear with protective film outside
• Included in the package a decal sheet pre-cut and windows mask

Made with one target: the excellence

The design, inspired by a real car and adapted to the measurements necessary for homologation took several months to optimize every single detail, the search of perfection has been obsessive in order to propose a body shell that could best enhance the aerodynamic study that the project involved.

HYPER-HR is a touring body with a modern look and that responds to market demand, in the course of several months of tests on the track, changes were made several times to the original project as we wanted to be sure to offer a product that could excel in the 190mm category, step by step we have reached an optimal level of performance and balance.

HYPER-HR redefines the concept of QUALITY.

You will be surprised by the precision and details of the body. HYPER-HR is made to amaze you.
HYPER-HR redefines the concept of QUALITY.
You will be surprised by the precision and details of the body. HYPER-HR is made to amaze you.
HYPER-HR redefines the concept of QUALITY.
 You will be surprised by the precision and details of the body. HYPER-HR is made to amaze you.
 3D Cad design & engineering

In order to respect our quality standards, we have not set any limits and we have realized the HYPER-HR project with the use of the most advanced graphics and Cad design; this process guarantees a perfect execution of the forms and details that high-tech machinery realize with 5-axis CNC milling machines.

The product we deliver in the hands of the enthusiast represents the best available on the market today, we exploit and make full use of the most advanced technology to guarantee a result that represents at best the Italian excellence.

190mm Wide / 256mm Standard 1/10 Car Wheelbase body for such as a Tamiya TT02.

Supplied unpainted - and may not match design, stickers might be limited to Lights & Grills. 

Bittydesign CA45 1/10 FWD 190mm Clear Bodyshell

BD-FWD-CA45 Bittydesign CA45 1/10 FWD 190mm Clear Bodyshell

CA45, a new contender for the 1/10 190mm FWD class!

This project was born from the desire to create a new body that could gather the experience accumulated with our previous FWD bodies but with different aerodynamic solutions in order to obtain the maximum possible performance for this category.

The CA45 body represents the best result of performance and aesthetics into the same product, a great mix with modern and aggressive look.

Premium Quality first of all
Our philosophy leads us not to settle for mediocrity or speculation, for each project we always pursue the same common thread: the best or nothing. To obtain products that fully meet our expectations, we dedicate months of virtual design and rendering in order to allow us to evaluate any improvements or details to be corrected.

QUALITY without any compromise is the basis of everything we make, the CA45 body shell represents the perfect implementation of our philosophy that drives us to do better and that encourages us to make use of our know-how acquired in over 15 years of experience.

Bittydesign Engineering is synonymous with guarantee, authenticity and innovation.

Features:
The body shell is UNIVERSAL and mounts on all 1/10 190mm models, both those specially developed by the manufacturers for the front-wheel drive (FWD) category and also those with traditional 4WD chassis (touring).

Made with high quality and genuine polycarbonate Lexan®
Included in the kit a complete set of screw, nuts and large plastic washers to fix properly the rear wing
Produced only in Light Weight version
Fit all the 190mm electric chassis on the market with 257-260mm wheelbase
Sold clear with protective film outside
Included in the package a decal sheet pre-cut and windows mask

Designed for maximum performance
The shapes inspired by a real car have been adapted to the proportions and measurements necessary for use with the 190mm electric models; the design phase took several months, the attention to details was obsessive in order to propose a body shell that could optimize aerodynamics while remaining faithful to the original shapes.

If the main intent was that of performance alone at the expense of aesthetics, the finished project resulted in a body with a breathtaking look, with TCR-style widened wheel arches and a harmony of shapes and proportions that make the CA45 both beautiful for pleasure of the eye is remarkably fast.

Bittydesign Magnetic Body Post Marker Kit - Blue - 4pcs

BD-BPMK10-BL Bittydesign Magnetic Body Post Marker Kit - Blue - 4pcs

The Bittydesign Magnetic Body Post Marker Kit is the right choice to make perfect holes on your body shell, 6 different iridium colors to meet your preference.

First of all we are racers like you and we know well how difficult is to make the body post holes perfectly trimmed left and right: the magnets kit resolve the problem with semplicity and rapidity. Say goodbye to wrong holes or bodies mounted not straight on the chassis, with the high-powered magnets you will obtain exact position of your car's body posts in a minute. Check out the ease of use of the tool in the following clip!

The kit is optimized to be used on all the 1/10 scale Off and On-Road cars.

This is a clear polycarbonate body parts set of the Wheelbase for 1/10 MTC / M-Chassis Kits

Key Features:

• Perfect Fit: Designed for a 225mm wheelbase and 165-170mm width for optimal performance and style.
• Durable Clear Lexan Construction: Lightweight yet sturdy, ensuring longevity and resilience on the track.
• Customizable: Comes with stickers (not all as shown)

Which Tamiya Chassis? (Will fit other MTC Makes)

• MB-01 (Modern/Current): This versatile, modern chassis allows for front (FWD) or rear (RWD) motor layouts, and specifically supports a 210mm wheelbase by adjusting its modular frame.
• M-08 Concept (Current RWD): A high-performance rear-midship chassis specifically designed to be assembled in S (210mm), M (225mm), or L (239mm) wheelbases.
• M-07 Concept (Current FWD): Primarily designed for 225mm/239mm, but some iterations and setups can accommodate it; however, the M-08 is generally favored for 210mm.
• MF-01X (4WD): This 4WD shaft-driven chassis can be assembled in 210mm (S), 225mm (M), or 239mm (L) configurations by adding or removing spacer parts.
• M-05 / M-05 Ver.II (Classic FWD): The standard FWD chassis for many years. It supports 210mm, 225mm, and 239mm configurations.
• M-06 (Classic RWD): Designed for rear-motor, rear-drive, it supports 210mm (S), 225mm (M), and 239mm (L).
• M-03 (Vintage FWD): The classic, older FWD M-Chassis often used in 210mm Mini Cooper kits.
• M-02 (Vintage RWD): Older rear-drive chassis.
• M-01 (Vintage 4WD/FWD): Original Mini Cooper chassis.
• XM-01 Pro (Rally 4WD): The modern 4WD rally chassis which supports three types of wheelbase.
• also Fits Carten And Louise MTX Range

Comes with window masks & stickers

Four Steps to On-Road Ready

1. Clean Body and apply included window mask
2. Paint then peel the over-spray film off
3. Sticker your body (decal sheet included)
4. Mount your new body onto your Car

Bittydesign Seven20 1/12 GT12 Supastox Body

BD-GT12-S20 Bittydesign Seven20 1/12 GT12 Supastox Body

Bittydesign AR8-GT3 GT12 body

BD-GT12-R8 Bittydesign AR8-GT3 GT12 body

Premium Quality first of all

Our philosophy leads us not to settle for mediocrity or speculation, for each project we always pursue the same common thread: the best or nothing. To obtain products that fully meet our expectations, we dedicate months of virtual design and rendering in order to allow us to evaluate any improvements or details to be corrected.

QUALITY without any compromise is the basis of everything we make, the AR8-GT3 body shell represents the perfect implementation of our philosophy that drives us to do better and that encourages us to make use of our know-how acquired in over 15 years of experience.

Bittydesign P-GT3R GT12 Clear Body - For 1/12 Supastox

BD-GT12-PGT3R Bittydesign P-GT3R GT12 Clear Body - For 1/12 Supastox            

Premium Quality first of all

Our philosophy leads us not to settle for mediocrity or speculation, for each project we always pursue the same common thread: the best or nothing. To obtain products that fully meet our expectations, we dedicate months of virtual design and rendering in order to allow us to evaluate any improvements or details to be corrected.

QUALITY without any compromise is the basis of everything we make, the P-GT3R body shell represents the perfect implementation of our philosophy that drives us to do better and that encourages us to make use of our know-how acquired in over 17 years of experience.

Bittydesign Engineering is synonymous with guarantee, authenticity and innovation.

3D CAD Design & Engineering

In order to respect our quality standards, we have not set any limits and we have realized the P-GT3R project with the use of the most advanced graphics and Cad design; this process guarantees a perfect execution of the forms and details that high-tech machinery realize with 5-axis CNC milling machines.

The product we deliver in the hands of the enthusiast represents the best available on the market today, we exploit and make full use of the most advanced technology to guarantee a result that represents at best the Italian excellence.

Features:

The P-GT3R body is compatible with SupaStox and SupaStox GT plus any other 1/12 scale model in the GT12 category

•Made with high quality and genuine polycarbonate Lexan®
•Produced only in Light Weight version
•Included in the kit a complete set of screw, nuts and large plastic washers to fix properly the rear wing
•Sold clear with protective film outside
•Included in the package a decal sheet pre-cut and windows mask

P-GT3R will surprise you from any perspective you look at it, his race style it's so awesome that it will leave you speechless every time you will use it.

Please Note: Body comes supplied clear and will require painting. Painted images are for illustration only.

This is a clear polycarbonate body parts set of the in 210mm to 225mm Wheelbase for 1/10 MTC / M-Chassis Kits

Key Features:

• Perfect Fit: Designed for a 210 to 225mm wheelbase and 165-170mm width for optimal performance and style.
• Durable Clear Lexan Construction: Lightweight yet sturdy, ensuring longevity and resilience on the track.
• Customizable: Comes with stickers (not all as shown)

Which Tamiya Chassis? (Will fit other MTC Makes)

• MB-01 (Modern/Current): This versatile, modern chassis allows for front (FWD) or rear (RWD) motor layouts, and specifically supports a 210mm wheelbase by adjusting its modular frame.
• M-08 Concept (Current RWD): A high-performance rear-midship chassis specifically designed to be assembled in S (210mm), M (225mm), or L (239mm) wheelbases.
• M-07 Concept (Current FWD): Primarily designed for 225mm/239mm, but some iterations and setups can accommodate it; however, the M-08 is generally favored for 210mm.
• MF-01X (4WD): This 4WD shaft-driven chassis can be assembled in 210mm (S), 225mm (M), or 239mm (L) configurations by adding or removing spacer parts.
• M-05 / M-05 Ver.II (Classic FWD): The standard FWD chassis for many years. It supports 210mm, 225mm, and 239mm configurations.
• M-06 (Classic RWD): Designed for rear-motor, rear-drive, it supports 210mm (S), 225mm (M), and 239mm (L).
• M-03 (Vintage FWD): The classic, older FWD M-Chassis often used in 210mm Mini Cooper kits.
• M-02 (Vintage RWD): Older rear-drive chassis.
• M-01 (Vintage 4WD/FWD): Original Mini Cooper chassis.
• XM-01 Pro (Rally 4WD): The modern 4WD rally chassis which supports three types of wheelbase.
• also Fits Carten And Louise MTX Range

Comes with window masks & stickers

Four Steps to On-Road Ready

1. Clean Body and apply included window mask
2. Paint then peel the over-spray film off
3. Sticker your body (decal sheet included)
4. Mount your new body onto your Car

This is a clear polycarbonate body parts set of the in 210mm to 225mm Wheelbase for 1/10 MTC / M-Chassis Kits

Key Features:

• Perfect Fit: Designed for a 210 to 225mm wheelbase and 165-170mm width for optimal performance and style.
• Durable Clear Lexan Construction: Lightweight yet sturdy, ensuring longevity and resilience on the track.
• Customizable: Comes with stickers (not all as shown)

Which Tamiya Chassis? (Will fit other MTC Makes)

• MB-01 (Modern/Current): This versatile, modern chassis allows for front (FWD) or rear (RWD) motor layouts, and specifically supports a 210mm wheelbase by adjusting its modular frame.
• M-08 Concept (Current RWD): A high-performance rear-midship chassis specifically designed to be assembled in S (210mm), M (225mm), or L (239mm) wheelbases.
• M-07 Concept (Current FWD): Primarily designed for 225mm/239mm, but some iterations and setups can accommodate it; however, the M-08 is generally favored for 210mm.
• MF-01X (4WD): This 4WD shaft-driven chassis can be assembled in 210mm (S), 225mm (M), or 239mm (L) configurations by adding or removing spacer parts.
• M-05 / M-05 Ver.II (Classic FWD): The standard FWD chassis for many years. It supports 210mm, 225mm, and 239mm configurations.
• M-06 (Classic RWD): Designed for rear-motor, rear-drive, it supports 210mm (S), 225mm (M), and 239mm (L).
• M-03 (Vintage FWD): The classic, older FWD M-Chassis often used in 210mm Mini Cooper kits.
• M-02 (Vintage RWD): Older rear-drive chassis.
• M-01 (Vintage 4WD/FWD): Original Mini Cooper chassis.
• XM-01 Pro (Rally 4WD): The modern 4WD rally chassis which supports three types of wheelbase.
• also Fits Carten And Louise MTX Range

Comes with window masks & stickers

Four Steps to On-Road Ready

1. Clean Body and apply included window mask
2. Paint then peel the over-spray film off
3. Sticker your body (decal sheet included)
4. Mount your new body onto your Car

Bittydesign JK12 GT12 Clear Body - 1/12 Supastox Class

BD-GT12-JK12 Bittydesign JK12 GT12 Clear Body - 1/12 Supastox Class

JK12 is pure performance for the GT12 category

Designed with the  aim of creating a body that is out of the ordinary  thanks to highly refined and extreme aerodynamics in every form; the JK12 raises the bar of performance to the highest level.

The JK12 body perfectly combines the pursuit of maximum performance with a look that leaves you breathless from any angle you look at it.

Absolute quality first and foremost

Our philosophy is to never settle for mediocrity or speculation. For every project, we always follow the same guiding principle: the best or nothing . To achieve products that fully meet our expectations, we dedicate months of design and virtual rendering to allow us to evaluate any improvements or details that need to be corrected.

Uncompromising QUALITY is the foundation of everything we create. The JK12 body represents the perfect implementation of our philosophy, which drives us to always do better and encourages us to use the know-how we've acquired over 20 years of experience.

Bittydesign Engineering is synonymous with guarantee, authenticity and innovation.

Designed for  maximum performance

To achieve maximum performance we tested the body several times making radical changes compared to the original project , we wanted to be sure we could offer a product with absolute performance that could become the new reference for the 1/12 GT category (Supastox).

The aerodynamics of the JK12 will amaze you because during development we put all our experience into play and optimized every detail, always focusing on maximum performance. The ease with which this bodywork will allow you to always "push" to your limit will leave you speechless every time you use it on your model.

3D CAD design and planning

To meet our quality standards, we set no limits and created the JK12 project using the most advanced graphics and CAD design; this process guarantees perfect execution of the shapes and details, which are achieved using cutting-edge machinery with 5-axis CNC milling machines.

The product we deliver into the hands of the enthusiast represents the best that can be had on the market today, we exploit and make full use of the most advanced technology to guarantee a result that best represents Italian manufacturing excellence .

Features:

The body is compatible with SupaStox and SupaStox GT plus any other 1/12 scale model in the GT12 category.

• Made from premium  Lexan® polycarbonate

• Printed in Light Weight version , material thickness 0.75mm

• Included in the kit is a complete set of screws, nuts and large plastic washers necessary for correct attachment of the wing

•Sold transparent with external protective film

• Included in the package is a pre-cut adhesive sheet and window masks

Please Note: The body shell is supplied clear on a mould, requiring both cutting and painting in order to finish.

The AGATA project was born from the desire to offer to the rc enthusiast all over the world a body shell that could recall our origins, Emilia land of engines and dream car manufacturers.

Tested over several months on different carpets and asphalts, the body is a new alternative for drivers who not only aim for pure performance but also seek an aesthetic satisfaction fully satisfied by the unique shapes and lines of AGATA.

The AGATA project represents the highest level in the RC industry in terms of development and engineering. We haven't set any limit and with the help of expert team of engineers we have developed a brand new product that features amazing details in terms aesthetic and aerodynamic. 

A parternship with Italian leading CNC factory allowed to obtain the maximum level of precision and quality possible today; we are proud supporters of the real Made in Italybased on the creation, passion and pure innovation.

The design recalls the shapes of the dream-car produced in Emilia, the phase of refinement took several months to optimize every detail, the search of perfection has been obsessive in order to propose a body that could honor our Italian excellence.

AGATA is a GT body with a stunning look, the lowered front nose generates an excellent steering while the wide cab and the neutral sides stabilize the air flows that conveyed into the large rear wing make the model easy to drive, the body is well balanced and does not undermine the set-up of your car.

The body shell meet the specifications needed to participate in any 1/10 GT race in the world, USGT class included.

• Made with high quality and genuine polycarbonate Lexan®
• Included in the kit a complete set of screw, nuts and large plastic washers to fix properly the rear wing
• Front foam (laser cut) to avoid the vibration of the front nose of the body included into the kit
• Produced in Light Weight version, thickness of material 0,75mm
• Sold clear with protective film outside
• Included in the package a decal sheet pre-cut and windows mask

The AGATA project was born from the desire to offer to the rc enthusiast all over the world a body shell that could recall our origins, Emilia land of engines and dream car manufacturers.

Tested over several months on different carpets and asphalts, the body is a new alternative for drivers who not only aim for pure performance but also seek an aesthetic satisfaction fully satisfied by the unique shapes and lines of AGATA.

The AGATA project represents the highest level in the RC industry in terms of development and engineering. We haven't set any limit and with the help of expert team of engineers we have developed a brand new product that features amazing details in terms aesthetic and aerodynamic. 

A parternship with Italian leading CNC factory allowed to obtain the maximum level of precision and quality possible today; we are proud supporters of the real Made in Italybased on the creation, passion and pure innovation.

The design recalls the shapes of the dream-car produced in Emilia, the phase of refinement took several months to optimize every detail, the search of perfection has been obsessive in order to propose a body that could honor our Italian excellence.

AGATA is a GT body with a stunning look, the lowered front nose generates an excellent steering while the wide cab and the neutral sides stabilize the air flows that conveyed into the large rear wing make the model easy to drive, the body is well balanced and does not undermine the set-up of your car.

The body shell meet the specifications needed to participate in any 1/10 GT race in the world, USGT class included.

• Made with high quality and genuine polycarbonate Lexan®
• Included in the kit a complete set of screw, nuts and large plastic washers to fix properly the rear wing
• Front foam (laser cut) to avoid the vibration of the front nose of the body included into the kit
• Produced in Light Weight version, thickness of material 0,75mm
• Sold clear with protective film outside
• Included in the package a decal sheet pre-cut and windows mask

190mm Wide / 256mm Standard 1/10 Car Wheelbase body for such as a Tamiya TT02.

Supplied unpainted - and may not match design, stickers might be limited to Lights & Grills. 

Bittydesign Eptron 1/10 TC 190mm body

Premium Quality first of all

Our philosophy leads us not to settle for mediocrity or speculation, for each project we always pursue the same common thread: the best or nothing. To obtain products that fully meet our expectations, we dedicate months of virtual design and rendering in order to allow us to evaluate any improvements or details to be corrected.

QUALITY without any compromise is the basis of everything we make, the eptron body shell represents the perfect implementation of our philosophy that drives us to do better and that encourages us to make use of our know-how acquired in over 15 years of experience.

Bittydesign Engineering is synonymous with guarantee, authenticity and innovation.

Product Features

The body shell complies with all EFRA, IFMAR, ROAR, BRCA and FEMCA homologation specs, so it can be used in any National and International race.

• Made with high quality and genuine polycarbonate Lexan®
• Included in the kit a complete set of screw, nuts and large plastic washers to fix properly the rear wing
• Produced in Light Weight version as well also Ultra Lite (ULT)
• Fit all the 190mm electric chassis on the market with 257-260mm wheelbase
• Sold clear with protective film outside
• Included in the package a decal sheet pre-cut and windows mask

Bittydesign Magnetic Body Post Marker Kit - Blue - 4pcs

BD-BPMK10-BL Bittydesign Magnetic Body Post Marker Kit - Blue - 4pcs

The Bittydesign Magnetic Body Post Marker Kit is the right choice to make perfect holes on your body shell, 6 different iridium colors to meet your preference.

First of all we are racers like you and we know well how difficult is to make the body post holes perfectly trimmed left and right: the magnets kit resolve the problem with semplicity and rapidity. Say goodbye to wrong holes or bodies mounted not straight on the chassis, with the high-powered magnets you will obtain exact position of your car's body posts in a minute. Check out the ease of use of the tool in the following clip!

The kit is optimized to be used on all the 1/10 scale Off and On-Road cars.