RC Vehicles

(TAMIYA PLUG FITTED - FOR OTHER PLUG'S, PLEASE SEE ADAPTOR LEADS OR CONNECTORS)

SUPPLIED WITH MOST TAMIYA KITS (SAME AS WP1060)

(TT01E Euro Truck Racing Stock Spec)

(BLACK VERSION)

One of the most popular Hobbywing brushed speed controls, the WP1060 

- Already pre soldered just plug and play.

Easy Operation
This ESC is specially designed for new beginners and intermediate modelers; it not only carries forward the outstanding quality of HOBBYWING products but simplifies the operation.

Applicable to All Weather Conditions
The waterproof and dust-proof design allows the QUICRUN WP-1060 Brushed to be used in all weather conditions without any issue of damage caused to the ESC from water or dust.

High Reliability & Durability
Reliable hardware combined with advanced software technology allows the QUICRUN WP 1060 Brushed to not only provide high power output but also overload protection of the ESC circuit.

Easy to Use
This ESC features auto throttle calibration and parameter setting via jump caps is easy-to-use, especially applicable to new beginners.

Wide Application
This ESC is designed for 1/10th scale touring cars, buggies, short-course trucks, monster trucks, trucks, crawlers and tanks.

Specifications
- Waterproof
- Cont./Peak Current - 60A/360A
- Input - 2-3S LiPo/6-9 Cells NiMH
- BEC Output - Switch Mode:6V/3A
- Input Wires - Red-16AWG-100mm*1/Black-16AWG-100mm*1
- Output Wires - Blue-16AWG-100mm*1/Yellow-16AWG-100mm*1
- Input Connectors - T Connector
- Output Connectors - 4.0 Bullet Connectors (Female)
- Size - 36.5x32.0x18.0mm
- Weight - 39g
- Motors - Brushed Motors 2S - 12T limit, 3S - 18T limit
- Vehicles - 1/10th Touring Cars/Buggies/Trucks/Rock Crawlers

UDI RC RAGESHARK MONSTER TRUCK 1/16 BRUSHED RTR - Pink

The 1/16 UD1611 Monster Truck (Brushed Version) from UDI RC offers reliable performance and driving fun in a robust 4WD chassis. The 390 brushed motor works with a 30A brushed ESC and a precise 17 g 3-line servo ideal for beginners and hobby drivers on asphalt, gravel, or light off-road terrain.

Oil-filled shock absorbers, universal dogbone driveshafts, and a reinforced PVC/PC body provide stability and durability. The quick-release design allows for easy maintenance of the body, differentials, and driveshafts. An intelligent battery management system protects the battery and electronics from damage.

Features

• 390 brushed motor for solid performance
• Brushed ESC (30A) with protection functions
• 17 g 3-line servo
• Permanent 4WD drivetrain
• Oil-filled shocks & universal dogbone driveshafts
• Reinforced PVC/PC body; chassis parts made of nylon & PC
• Aluminum heat sinks on motor & ESC
• Intelligent battery management (charging, deep-discharge & battery protection)
• Colors: Purple / Blue
• Top speed: approx. 30 km/h

Specifications

Scale: 1:16
Dimensions: 292 × 225 × 133 mm
Wheel Track / Wheelbase: 180 mm / 180 mm
Motor: 390 brushed
ESC: 2.4 GHz brushed ESC (30A)
Servo: 17 g 3-line servo
Drive: 4WD
Transmitter: 2.4 GHz pistol-grip transmitter, fully proportional
Range: ≥ 60 m
Run Time / Charge Time: Approx. 14 minutes / approx. 180 minutes
Vehicle Battery: 7.4 V 1200 mAh (18650, T-Plug) included
Transmitter Batteries: 4 × AA / 18650 (1200 mAh) not included
Charger: Included
Protection Functions: Charging, deep-discharge & battery protection; automatic power reduction at ? 6.6 V, shutdown at ? 6.5 V
Weight (Net / Gross): Approx. 1.9 / 2.5 kg

What's Included

• Factory-assembled 1/16 brushed model (RTR)
• 390 motor
• 30A ESC
• 17 g servo
• LED lighting
• 2.4 GHz transmitter
• 7.4 V 1200 mAh battery (18650, T-Plug)
• Charger
• Manual

Please Note: Transmitter batteries not included.

FTX KHAOS 1/10 BRUSHLESS 4WD TRUGGY RTR WITH 3S LIPO AND CHARGER - BLUE

Get Set for some mayhem and madness with the Khaos, the latest 3S LiPo brushless-powered off-road truggy from FTX.

Blending affordability, specification and tunability, the Khaos is perfect for anyone stepping up from brushed models or wanting more performance beyond a regular 2S truck. With an oversized footprint, the Khaos is larger than a traditional 1:10 scale vehicle and features the latest Etronix 80A brushless speed control and 3665 2100Kv motor. Paired with a 3S 3300mAh LiPo battery, straight-line speeds are exciting while remaining controllable and easy to drive.
With the inclusion of the latest compact Etronix EX4M radio, a 9kg-rated metal-geared steering servo, balance charger and Voltz LiPo charge-safe sack, you have a high-spec package ready to go straight out of the box.

Front, rear and centre geared differentials with metal gears provide smooth power transfer through front and rear universal driveshafts, finished with aluminium wheel hexes. A heavy-duty moulded tub chassis houses all components, while the updated geometry rear shock tower supports new heavy-duty body mounts.
Oil-filled shock absorbers are configured to soak up the terrain at each corner, while aluminium suspension hanger mounts secure the double wishbone suspension.
Khaos by name chaos by nature, this brushless supersized 1:10 truggy is ready to deliver thrills and spills in abundance.

Features

• 99% Ready-To-Run.
• Etronix EX4M 4ch 2.4ghz Radio.
• Etronix Photon Waterproof 80A Brushless ESC.
• Etronix Photon 3665 2100kv Brushless Motor.
• Etronix 9KG MG Waterproof Steering Servo.
• Etronix PowerPal Balance Charger.
• Voltz 3300mAh 3S LiPo Battery.
• Voltz LiPo Charge Sack.
• Front, rear and centre geared differentials with metal gears.
• Moulded tub chassis.
• Aluminium upper plate.
• 4WD shaft drive.
• Unique gearbox design for low CG.
• Lightweight high impact arms.
• Big bore oil filled adjustable shocks.
• Gearbox metal crown & pinion gear.
• Front and rear universal driveshafts.
• Adjustable wheelbase.
• Adjustable turnbuckles.
• Fully adjustable suspension including, droop, camber, toe-in, wheelbase etc.
• Front and Rear Alloy Suspension Mounts.
• Receiver Box.
• Aggressive Body Styling.
• Full Ball Bearings.
• Wide range of option parts available.

Kyosho Fazer FZ02 (L) Dodge Challenger SRT 2015 Blue 1:10 Readyset

"The American muscle car" Dodge Challenger SRT Hellcat "that everyone longs for is reproduced with a high quality body! "

<Readyset Contents>

- Completed chassis with R/C radio installed
- Factory assembled body complete with color scheme
- Syncro KT-231P+ transmitter
- Hexagonal wrench
- Spanner
- Setting change parts

<Required for Operation>

- 4 x AA batteries for transmitter
- Battery for chassis (recommended: 7.2V Ni-MH battery or 7.4V Lipo)
- Charger for battery for chassis
- Tools

<Technical Data>

- Length 486mm
- Width （Body width） 190mm（200mm）
- Height 144mm
- Wheelbase 274mm
- Tread (F/R) F：174mm／R：174mm
- Tires (F/R) F：φ66×25mm／R：φ66×25mm
- Gear Ratio 6.5：1
- Weight 1650g (approx.)
- R/C system Syncro KT-231P+
- Motor G14L

For the pure enjoyment of R/C car driving, the combination of a beautifully reproduced car body with the FAZER series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance to a new level. A simplified design with fewer parts has improved maintenance efficiency and reduced weight while core strength and rigidity has been increased through new materials and ribbing and stiffeners on front and rear. In addition, the symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, irrespective of power source. Featuring front & rear gear differentials, oil shocks and full ball bearing specs, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 260mm by replacing some parts (sold separately) for compatibility with other 1/10 scale body styles, in addition the body included. The Readyset package comes fully assembled and includes everything except charger and battery for the chassis, and batteries for the transmitter.

- Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter, and battery with charger for the chassis.
- Full ball bearings that reduce drive loss equipped throughout the drive system.
- Features KS202W waterproof steering servo.
- Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces.
- Shaft drive full-time 4WD touring chassis（FZ02）.
- Equipped with a plated dummy brake disc and a painted brake caliper to improve the sense of scale.
- Uses button screws with hexagonal holes in each part. Reliable tightening torque can be applied, and maintenance is possible with even fewer tools.
- Since the motor mount has mounting holes according to the pinion gear, troublesome backlash adjustment is unnecessary. Supports from 29T to 37T.
- Performance can be further enhanced by installing various optional parts.

Simple low center of gravity upper deckless chassis design features an electronic speed controller and receiver cover as well as a one-piece gearbox that optimizes main chassis torsional rigidity and strength while reducing weight with the introduction of lightweight impact-resistant nylon.

Features a reduced number and variety of screws and parts, and consolidation of frequently used screws into the same size. Most screws are flat head screws that can be removed with a 2.0mm hex wrench for easy disassembly.

Handling factors such as bump steer and scrub radius are optimized on front suspension. Simple ball-connected steering knuckle promises reliable control movement. Interchangeable on both front and rear left-right hub carriers optimize spare parts utilization and improve maintenance efficiency.

Oil shocks mark an evolutionary step up from previous models Oil shock is newly designed. Optimal front-rear geometry and balance simultaneously delivers both light handling and precise control.

Standard spur and pinion gear setting is 68T and 32T, but 9 pinion gear settings can be used from 29T – 37T to produce a wide range of gear ratio settings. Also, motor is mounted directly according to the pinion gear modules.

Original low-profile semi-slick pattern tires produce superior performance.

Comes with the new powerful 550 size 14T brushed motor(G14L). The long can with Steel ring around the motor case and internal cooling fan provides efficient torque and high speeds.

Front grille compatible with the separately sold 97054 LED light unit series.By installing the LED light unit, improves scale realism for body shell.

The Mini SC brings big technology in a compact size.
Equipped with a built-in gyroscope and electronic stability system, it keeps perfect control even on slippery surfaces.

<Readyset Contents>

- Included: 1:24 Mini SC RTR Buggy,
- 2.4GHz Remote Control,
- 300mAh LiPo Battery,
- USB Charger,
- Manual

<Required for Operation>

- AA-size alkaline batteries x 2 or Ni-MH batteries x 2 for transmitter

It comes ready-to-run with a Li-Po battery included, easily rechargeable with the supplied USB cable.

The radio system is 2.4GHz full proportional steering and throttle, and a built-in gyroscope with electronic stability control, it delivers smooth and precise handling everywhere.

Its stunning Lexan body is both stylish and incredibly durable, ready to handle real off-road action.

Note: You can reduce the maximum speed to suit your driving ability. A powerful Li-Po battery delivers long run times for more fun between charges. All of this in a 1/24 scale truck you can race anywhere, anytime.

• 1:24, 2.4GHz fully proportional remote control, 3.7V 300mAh LiPo Battery
• Gyro and ESP, Maximum speed adjustable for beginners
• Driving time: approx. 20 minutes, USB Charger, two colours available

Included: 1:24 Mini SC RTR Buggy, 2.4GHz Remote Control, 300mAh LiPo Battery, USB Charger, Manual

Full range of spares and batteries available on request.

Now driving R/C is even more fun Newly designed FZ02L chassis with realistic racing car body

For the pure enjoyment of R/C car driving, the combination of a beautifully reproduced car body with the FAZER series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance to a new level. A simplified design with fewer parts has improved maintenance efficiency and reduced weight while core strength and rigidity has been increased through new materials and ribbing and stiffeners on front and rear. In addition, the symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, irrespective of power source. Featuring slipper clutch, front & rear gear differentials, oil shocks and full ball bearing specs, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 274mm by replacing some parts (sold separately) for compatibility with other 1/10 scale body styles, in addition the body included. The Readyset package comes fully assembled and includes everything except charger and battery for the chassis, and batteries for the transmitter.

- “Ultra Scale Body” replicates the fine details of the actual body of the car. Kyosho took a step further in scale realism.
- New design shaft drive full-time 4WD touring chassis（FZ02）.
- Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter, and battery with charger for the chassis.
- Equipped with 2-bevel grease-filled gear diffs on front and rear.
- Large size dog bones and cup joints realize superior reliability and durability.
- Belt mounting battery compartment allows various battery types to be used.
- Full ball bearings that reduce drive loss equipped throughout the drive system.
- Features KS202W waterproof steering servo.
- Includes completely finished body with color scheme and decals applied.
- Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces.
- Performance can be further enhanced by installing various optional parts.

Completely new chassis realizes low center of gravity with its simple, functional design. Featuring an integrated gearbox that optimizes torsional rigidity of the main chassis, the nylon material reduces weight while improving impact resistance. Each key component has been reinforced in this simple design without upper deck.

Features a reduced number and variety of screws and parts, and consolidation of frequently used screws into the same size. Most screws are flat head screws that can be removed with a 2.0mm hex wrench for easy disassembly.

Handling factors such as bump steer and scrub radius are optimized on front suspension. Simple ball-connected steering knuckle promises reliable control movement. Interchangeable on both front and rear left-right hub carriers optimize spare parts utilization and improve maintenance efficiency.

Includes choice of two offset brake disc wheel hubs with dummy calipers (for visual styling) that provide compatibility with 190mm and 200mm body widths.

Oil shocks mark an evolutionary step up from previous models Oil shock is newly designed. Optimal front-rear geometry and balance simultaneously delivers both light handling and precise control.

Standard spur and pinion gear setting is 68T and 32T, but 9 pinion gear settings can be used from 29T – 37T to produce a wide range of gear ratio settings. The new fixed gear mesh motor mount has holes for use with each different pinion gears. Just simply mount the motor directly to the hole locations corresponding to the pinion gear. No gear mesh adjustment is necessary.

Comes with the new powerful 550 size 14T brushed motor(G14L). The long can with Steel ring around the motor case and internal cooling fan provides efficient torque and high speeds.

Original low-profile semi-slick pattern tires produce superior performance.

Equipped with Front and Rear light buckets compatible with optional 97054 LED Light unit which is sold separately. By installing the LED light unit, improves scale realism for body shell.

Ready To Run - Battery & Charger Included

The popular Treka enjoys a facelift on the latest Outack 3 trail platform. Using hidden body mounts the detailed bodyshell features multiple moulded scale accessories such as integrated front grill with ‘angel eyes’ headlights, moulded scale bumpers, PVC roof cover and roof rack, mirrors, roof spot lights and clear windows the Treka 3 is just itching to be taken out on adventure.

Underneath the Outback 3 uses Etronix’s new System 3 waterproof ESC/RX/LED intelligent light smart controller providing a wide array of different lighting options along with the option of aftermarket plug-in roof LED bulbs.

A powerful Etronix 6kg steering servo, along with an improved 45° steering angle, paired with adjustable front caster angle provides exceptional maneuverability in tight spaces. The 1500mAh battery has been moved forward for improved stability, while the oill filled shock absorbers now feature threaded bodies for fine tuning adjustment.

Updated locked front and rear axles feature a scale removable cover for access the metal drive spool and crown gear, while side chassis rock sliders help those annoying snags.

With scale tread 1.9”supersoft tyres mounted to chrome wheels, finished off with nut dust covers the Treka 3 is all set and ready for you to explore new paths.

Features

• 99% Ready-to-Run
• Etronix 4ch 2.4ghz radio system
• Etronix System3 Waterproof ESC/RX/LED Smart Controller
• Etronix 6kg waterproof servo
• 390 brushed 25 Turn motor
• 7.2v 1500mah NiMH battery & USB charger
• Ball bearings
• Steel twin rail metal frame chassis
• 6mm steel multi-link suspension
• Telescopic centre universal driveshafts
• Steel CVA front universal driveshafts
• Oil filled shock absorbers
• Integrated locked axles w/removable cover
• Improved 45° angle steering
• Metal drive spool and crown gear
• 1.9: chrome wheels w/nut dust cover
• Forward mounted battery tray
• Moulded grill, bumpers, light buckets
• PVC Roof cover and roof rack
• Intelligent LED headlights
• Hidden body post mounting
• Bodyshell features clear windows

Ready-To-Run Package

• Fully assembled RTR vehicle.
• 2.4GHz radio system included.
• Voltz 7.2V 2000mAh NiMH battery included.
• USB charger included.
• Requires only 4 x AA batteries for the transmitter.

Building on the success of the popular Fury 2.0, the new FTX Outback Fury 3.0 takes scale trail driving and crawling performance to the next level. Designed for enthusiasts who demand realistic looks, advanced functionality and dependable off-road capability, the Fury 3.0 introduces a range of upgraded features that enhance durability, drivability and scale authenticity.

At the heart of the Fury 3.0 is a newly refined crawler platform featuring a servo-operated two-speed transmission, allowing drivers to switch between low-range crawling and higher-speed trail driving at the touch of a button. The transmission also incorporates a reverse-drive layout to reduce torque twist and improve climbing stability on challenging terrain.

The chassis combines a low centre of gravity with a rugged steel C-channel frame and a heavy-duty 6.5mm steel multi-link suspension system. High-clearance locked axles, steel transmission components and telescopic driveshafts work together to deliver confident performance over rocks, roots, mud and uneven ground while maintaining excellent articulation and traction.

Semi-scale realism remains a key focus of the Fury 3.0. Moulded body accessories, inner fenders, a detailed roll cage and roof rack create an authentic off-road appearance, while integrated multi-mode LED lighting featuring distinctive Angel Eye headlights and an illuminated grille light bar ensure the vehicle looks as impressive after dark as it does during daylight adventures.

Ready-to-run straight from the box, the Fury 3.0 includes a Hobbywing waterproof speed controller, Etronix waterproof metal-gear steering servo, Voltz NiMH battery and USB charger, making it the perfect choice for newcomers and experienced trail drivers alike.

Features

Chassis & Drivetrain

• Servo-operated remote two-speed transmission.
• Low-range crawling and high-speed trail drive modes.
• Reverse-drive transmission layout to reduce torque twist.
• Steel transmission gears.
• Metal axle gears.
• Front and rear high-clearance locked axles.
• Centre telescopic driveshafts.
• Steel front CVA universal driveshafts.
• Telescopic universal driveshafts with steel joint heads.
• Full ball bearing transmission.

Suspension & Steering

• Adjustable steel C-channel ladder frame chassis.
• Heavy-duty 6.5mm steel multi-link suspension system.
• Eight-link suspension design for maximum articulation.
• CNC aluminium oil-filled coil-over shock absorbers.
• SOA (Servo-On-Axle) steering system.
• Waterproof Etronix 15kg metal gear steering servo.
• Metal servo horn for precise steering response.

Electronics

• Hobbywing WP1040 waterproof brushed ESC.
• Supports NiMH and 2S–3S LiPo batteries.
• 540-size 20-turn brushed motor.
• Waterproof electronics package.
• Receiver protection box.

Scale Details

• Hidden body mounting system.
• Detailed moulded body accessories.
• Scale roll cage.
• Roof rack.
• Moulded inner fenders.
• Scale beadlock-style wheels.
• High-grip Fastrax Bedrock tyres.

LED Lighting System

• Multi-mode LED lighting package.
• Integrated Angel Eye LED headlights.
• Illuminated front grille light bar.
• Realistic trail and night-driving appearance.

Ready-To-Run Package

• Fully assembled RTR vehicle.
• 2.4GHz radio system included.
• Voltz 7.2V 2000mAh NiMH battery included.
• USB charger included.
• Requires only 4 x AA batteries for the transmitter.

Specifications

Scale: 1:10
Drive System: Shaft-Driven 4WD
Length: 530mm
Width: 235mm
Height: 240mm
Wheelbase: 313mm
Ground Clearance: 73mm
Weight (without battery): 2880g
Tyre Diameter: 110mm
Wheel Diameter: 54mm
Transmission Ratio (Low): 41:1
Transmission Ratio (High): 20:1
Motor: 540 20T Brushed
ESC: Hobbywing WP1040 Waterproof
Servo: Etronix 15kg Waterproof Metal Gear
Battery: Voltz 7.2V 2000mAh NiMH
Charger: USB 600mA
Radio System: 2.4GHz
Battery Compatibility: NiMH / 2S–3S LiPo

What's New Over The Fury 2.0?

• New servo-operatedtwo-speed transmission.
• Low and high range selectable gearing.
• Reverse-drive transmission design for reduced torque twist.
• Upgraded Etronix 15kg metal gear servo with metal horn.
• Hobbywing WP1040 waterproof ESC.
• CNC aluminium oil-filled shocks.
• Front steel CVA universal driveshafts.
• Multi-mode LED lighting package.
• Angel Eye headlights and illuminated grille light bar.
• Hidden body mounting system.
• Enhanced scale accessories, roll cage and roof rack.
• Improved scale realism with moulded inner fenders.

This gives the Fury 3.0 a stronger feature set, greater crawling versatility, improved trail performance, and a more realistic scale appearance than the previous Fury 2.0.

Stage-D10 - The next generation of HPI Racing drift!
The Stage-D10 is HPI Racing"s all-new, purpose-built 1/10th scale rear-wheel-drive drift platform, combining a great Ready-To-Run setup with the huge range of tuning possibilities demanded by today"s RC drifters.

Developed from the ground up over three years, the Stage-D10 has been tested across multiple surfaces, by drivers ranging from RWD newcomers to experienced RC drifters. That testing helped us refine the chassis, add new features and develop a factory setup that delivers great all-around performance straight out of the box.

Underneath, there"s a serious amount of adjustment waiting to be explored.

And because this is HPI, the first Stage-D10 RTR cars come topped with stunning officially licensed 2024 Ford Mustang RTR Spec-5 FD bodies, complete with authentic Formula Drift liveries, molded scale details, replica wheels and a full LED light system.

New to RWD drifting? The Stage-D10 will give you the confidence to get it on the track and start driving.

Already know your way around a drift chassis? The Stage-D10 has the base for almost any setup you want straight from the box, with no extra parts required. So start adjusting.....

#161008 Stage-D10 Ford Mustang RTR Spec-5 FD - Ben Hobson
1/10th Scale Pre-Assembled 2WD RWD Drift car with 2.4GHz Radio System and Painted Ford Mustang RTR Spec-5 FD body

SPECIFICATIONS: 
Length: 460mm
Height: 120mm
Width: 200mm
Wheelbase: 255mm

BRUSHED RTR EQUIPMENT
TF-51 4-channel transmitter
RF-51 receiver with LED adaptor
20T brushed 540 motor
SC-3SWP2 60A ESC
SD-07WR Servo (Water-Resistant/6.0V/7Kg/Plastic Geared)
D-Box3 Lite drift gyro
Channel 4 gyro gain adjustment
XT-60 battery connector
Full LED light system
Battery and charger not included.

What you need: 
4 AA batteries
2S LiPo pack with XT-60 plug - HPI Recommends:
#160794 Plazma 7.4V 5300mAh 40C LiPo Pack 39.22Wh - XT60
Battery charger for car battery - HPI Recommends:
Reactor 200 – #118049 (US), #118050 (UK), #118051 (EU)
Reactor 600 - #160236 (US), #160237 (UK), #160238 (EU), #160239 (AUS)
LiPo Charge Case - HPI Recommends #160013 Plazma Pouch

Kyosho Fazer D2 Toyota Sprinter Trueno AE86 White 1:10 Drift Readyset

Just add battery and charger

KYOSHO - RC Fazer FZ02 (L) Ford Mustang Boss 429 Black 1969 1/10 - K.34437T1-FS

Just add 4x AA Batteries for handset.

4000mah Lipo Battery & Toolkit 2.2Amp charger (may need a 3 pin UK Adaptor.

Recreate the admired American muscle car with an ultra-scale body Plus！ Experience powerful driving with the 1969 Ford Mustang Boss 429 Black Jade.

For the pure enjoyment of R/C car driving, the combination of a beautifully reproduced car body with the FAZER series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance to a new level. A simplified design with fewer parts has improved maintenance efficiency and reduced weight while core strength and rigidity has been increased through new materials and ribbing and stiffeners on front and rear. In addition, the symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, irrespective of power source. Featuring slipper clutch, front & rear gear differentials, oil shocks and full ball bearing specs, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 274mm by replacing some parts (sold separately) for compatibility with other 1/10 scale body styles, in addition the body included. The Readyset package comes fully assembled and includes everything except charger and battery for the chassis, and batteries for the transmitter.

- It faithfully reproduces the body, light bezels, grille, bumpers, and mirrors, and from the highly detailed “ULTRA SCALE BODY,” which can be described as a “running display model” thanks to its realistic vehicle proportions and meticulous craftsmanship down to the finest details, it has evolved into the “ULTRA SCALE BODY Plus,” featuring a clipless body mounting system that eliminates the need for body clips.
- The body mount uses the same body mounting system as the FAZER D2.
- The body incorporates injection-molded parts in various areas, and the chrome-plated bumpers along with finely detailed components enhance its overall realism. In particular, the taillights use injection-molded parts, resulting in a sharper and more refined finish.
- The light lenses use clear injection-molded parts with detailed lens cuts, and the light buckets are compatible with the separately sold 97054 LED Light Unit series. By installing the front four-lamp halogen LEDs and rear two red LED light units, the body is transformed into a highly realistic, full-scale-looking model. (Recommended LED light units: 97054-4H and 97054-2R-B)
- It is equipped with vintage TC tires and low-style wheels that perfectly match the vintage car theme.
- Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter, and battery with charger for the chassis.
- Full-time 4WD touring chassis with shaft drive that allows anyone to enjoy driving.（FZ02L).
- Full ball bearings that reduce drive loss equipped throughout the drive system.
- Features KS202W waterproof steering servo.
- Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces.
- Uses button screws with hexagonal holes in each part. Reliable tightening torque can be applied, and maintenance is possible with even fewer tools.
- Since the motor mount has mounting holes according to the pinion gear, troublesome backlash adjustment is unnecessary. Supports from 29T to 37T.
- Performance can be further enhanced by installing various optional parts.

Only 859 units of this special model were produced to obtain homologation for racing competition. A large air scoop on the hood channeled air to the 375 horsepower 429 cubic inch (7.0L) V8 engine. The fenders displayed the "BOSS 429" logo.

Vintage Touring Car (VTC) tires and low-style wheels feature a design that perfectly complements vintage cars.

The light lenses are made from clear injection-molded parts with detailed lens cuts, and the light buckets are compatible with the separately sold 97054 LED Light Unit series. By installing the front four halogen-style LEDs and the rear two red LED light units, the body is transformed into a highly realistic, full-scale appearance.(Recommended LED light units: 97054-4H and 97054-2R-B)

Newly designed concealed body mounts mean the fixing posts and pins do not protrude externally, allowing a more realistic appearance of the exquisite ultra-scale body.

Completely new chassis realizes low center of gravity with its simple, functional design. Featuring an integrated gearbox that optimizes torsional rigidity of the main chassis, the nylon material reduces weight while improving impact resistance. Each key component has been reinforced in this simple design without upper deck.

Features a reduced number and variety of screws and parts, and consolidation of frequently used screws into the same size. Most screws are flat head screws that can be removed with a 2.0mm hex wrench for easy disassembly.

Handling factors such as bump steer and scrub radius are optimized on front suspension. Simple ball-connected steering knuckle promises reliable control movement. Interchangeable on both front and rear left-right hub carriers optimize spare parts utilization and improve maintenance efficiency.

Includes choice of two offset brake disc wheel hubs with dummy calipers (for visual styling) that provide compatibility with 190mm and 200mm body widths.

Oil shocks mark an evolutionary step up from previous models Oil shock is newly designed. Optimal front-rear geometry and balance simultaneously delivers both light handling and precise control.

Standard spur and pinion gear setting is 68T and 32T, but 9 pinion gear settings can be used from 29T – 37T to produce a wide range of gear ratio settings. The new fixed gear mesh motor mount has holes for use with each different pinion gears. Just simply mount the motor directly to the hole locations corresponding to the pinion gear. No gear mesh adjustment is necessary.

Now driving R/C is even more fun Newly designed FZ02L chassis with realistic racing car body

For the pure enjoyment of R/C car driving, the combination of a beautifully reproduced car body with the FAZER series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance to a new level. A simplified design with fewer parts has improved maintenance efficiency and reduced weight while core strength and rigidity has been increased through new materials and ribbing and stiffeners on front and rear. In addition, the symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, irrespective of power source. Featuring slipper clutch, front & rear gear differentials, oil shocks and full ball bearing specs, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 274mm by replacing some parts (sold separately) for compatibility with other 1/10 scale body styles, in addition the body included. The Readyset package comes fully assembled and includes everything except charger and battery for the chassis, and batteries for the transmitter.

- “Ultra Scale Body” replicates the fine details of the actual body of the car. Kyosho took a step further in scale realism.
- New design shaft drive full-time 4WD touring chassis（FZ02）.
- Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter, and battery with charger for the chassis.
- Equipped with 2-bevel grease-filled gear diffs on front and rear.
- Large size dog bones and cup joints realize superior reliability and durability.
- Belt mounting battery compartment allows various battery types to be used.
- Full ball bearings that reduce drive loss equipped throughout the drive system.
- Features KS202W waterproof steering servo.
- Includes completely finished body with color scheme and decals applied.
- Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces.
- Performance can be further enhanced by installing various optional parts.

Completely new chassis realizes low center of gravity with its simple, functional design. Featuring an integrated gearbox that optimizes torsional rigidity of the main chassis, the nylon material reduces weight while improving impact resistance. Each key component has been reinforced in this simple design without upper deck.

Features a reduced number and variety of screws and parts, and consolidation of frequently used screws into the same size. Most screws are flat head screws that can be removed with a 2.0mm hex wrench for easy disassembly.

Handling factors such as bump steer and scrub radius are optimized on front suspension. Simple ball-connected steering knuckle promises reliable control movement. Interchangeable on both front and rear left-right hub carriers optimize spare parts utilization and improve maintenance efficiency.

Includes choice of two offset brake disc wheel hubs with dummy calipers (for visual styling) that provide compatibility with 190mm and 200mm body widths.

Oil shocks mark an evolutionary step up from previous models Oil shock is newly designed. Optimal front-rear geometry and balance simultaneously delivers both light handling and precise control.

Standard spur and pinion gear setting is 68T and 32T, but 9 pinion gear settings can be used from 29T – 37T to produce a wide range of gear ratio settings. The new fixed gear mesh motor mount has holes for use with each different pinion gears. Just simply mount the motor directly to the hole locations corresponding to the pinion gear. No gear mesh adjustment is necessary.

The iconic 60’s American pickup truck has an enduring coolness that is still relevant today. This Fleetside specification model featured a flatbed that was the same width as the body with straight lines that flowed elegantly from front to rear.

Vintage Touring Car (VTC) tires & Rostyle type wheels to match vintage car style.

Comes with the new powerful 550 size 14T brushed motor(G14L). The long can with Steel ring around the motor case and internal cooling fan provides efficient torque and high speeds.

Now driving R/C is even more fun Newly designed FZ02L chassis with realistic racing car body

For the pure enjoyment of R/C car driving, the combination of a beautifully reproduced car body with the FAZER series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance to a new level. A simplified design with fewer parts has improved maintenance efficiency and reduced weight while core strength and rigidity has been increased through new materials and ribbing and stiffeners on front and rear. In addition, the symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, irrespective of power source. Featuring slipper clutch, front & rear gear differentials, oil shocks and full ball bearing specs, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 274mm by replacing some parts (sold separately) for compatibility with other 1/10 scale body styles, in addition the body included. The Readyset package comes fully assembled and includes everything except charger and battery for the chassis, and batteries for the transmitter.

- “Ultra Scale Body” replicates the fine details of the actual body of the car. Kyosho took a step further in scale realism.
- New design shaft drive full-time 4WD touring chassis（FZ02）.
- Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter, and battery with charger for the chassis.
- Equipped with 2-bevel grease-filled gear diffs on front and rear.
- Large size dog bones and cup joints realize superior reliability and durability.
- Belt mounting battery compartment allows various battery types to be used.
- Full ball bearings that reduce drive loss equipped throughout the drive system.
- Features KS202W waterproof steering servo.
- Includes completely finished body with color scheme and decals applied.
- Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces.
- Performance can be further enhanced by installing various optional parts.

Completely new chassis realizes low center of gravity with its simple, functional design. Featuring an integrated gearbox that optimizes torsional rigidity of the main chassis, the nylon material reduces weight while improving impact resistance. Each key component has been reinforced in this simple design without upper deck.

Features a reduced number and variety of screws and parts, and consolidation of frequently used screws into the same size. Most screws are flat head screws that can be removed with a 2.0mm hex wrench for easy disassembly.

Handling factors such as bump steer and scrub radius are optimized on front suspension. Simple ball-connected steering knuckle promises reliable control movement. Interchangeable on both front and rear left-right hub carriers optimize spare parts utilization and improve maintenance efficiency.

Includes choice of two offset brake disc wheel hubs with dummy calipers (for visual styling) that provide compatibility with 190mm and 200mm body widths.

Oil shocks mark an evolutionary step up from previous models Oil shock is newly designed. Optimal front-rear geometry and balance simultaneously delivers both light handling and precise control.

Standard spur and pinion gear setting is 68T and 32T, but 9 pinion gear settings can be used from 29T – 37T to produce a wide range of gear ratio settings. The new fixed gear mesh motor mount has holes for use with each different pinion gears. Just simply mount the motor directly to the hole locations corresponding to the pinion gear. No gear mesh adjustment is necessary.

1965 Buick Riviera Amongst the famous models produced by America’s prestigious Buick marque, the Riviera released in 1963 received high praise for its distinguished body design. The more elegant 1965 model featured repositioned headlights and tail lights.

Vintage Touring Car (VTC) tires & Rostyle type wheels to match vintage car style.

Comes with the new powerful 550 size 14T brushed motor(G14L). The long can with Steel ring around the motor case and internal cooling fan provides efficient torque and high speeds.

About Catch Surf® In 2007, a cultural surf and style icon was born. Catch Surf was conceived in Laguna Beach, California and is headquartered in San Clemente, California, USA. Catch Surf revolutionized surfing by introducing the first-ever high performance and radical-80’s looking soft surfboards. By leading in innovation, style and performance; Catch Surf has been able to get many of the top pros to join the team and progress the concept to the max; by surfing massive waves, doing huge airs and simply having more fun than anyone else. Catch Surf is 100% surfer owned and operated and can be found at the finest surf shops, online at catchsurf.com and at its flagships stores in Laguna Beach, San Clemente, Malibu and Encinitas, California.

Waterproof board design incorporates unsinkable built-in float.

Factory assembled Readyset only requires 4 x AA batteries for the transmitter. Simply install the surfer figure onto the board to enjoy.RC Surfer is an RC model propelled by a propeller. Cannot be used to surf without electric power.

Unique shaped rudder with reinforced stainless steel shaft delivers sure control down the slope of the wave. Features a mechanism to protect the propeller if board rides up on the beach.

Rudder servo linkage can be accessed by removing round cover on the rear of the surfboard.

Equipped with water-cooled KYOSHO SPEED HOUSE KA060-91W 60A waterproof ESC that controls high 60A current. 14T 550-class motor installed with water-cooling jacket, realizes powerful riding performance.

Reinforced realistic male surfer figure features hollow structure and functions as balance float to support auto recovery and capsize.

Includes one randomly selected CATCH SURF sticker.

The power and control of the EZ series Sand Master 2.0 delivers excellent handling for thrilling off-road and on-road driving. With its 2.4GHz R/C specifications, automatic frequency allocation makes racing against multiple cars easy to manage. The maintenance-friendly design relies on fewer parts and the body structure can be efficiently assembled or disassembled with the included tools (L-shaped and cross-shaped wrenches). This Readyset includes fully assembled chassis with body set finished with decals applied, making it an ideal first model for newcomers to the exhilarating fun of electric R/C buggies, as well as a great fun-to-drive machine for more experienced drivers.

• Gearbox with built-in differential gear delivers smooth cornering and features larger modules for greater durability.
• FRP dust plate between the motor and motor mount keeps the gearbox clean by shutting out dust sucked in by the motor.
• Compatible with many optional parts available for previous Sand Master versions.
• Factory-completed Readyset only requires 4 x AA batteries for the transmitter, chassis battery and battery charger for operation.

Technical Data

• Length 405mm
• Width  230mm
• Height 140mm
• Wheelbase 270mm
• Tread（Ｆ／Ｒ） 190mm
• Tire（Ｆ／Ｒ） φ100×36mm
• Gear Ratio  8.76:1
• Weight  1,700g  (approx.)
• Motor  540class

Kit Content

• Completed chassis with R/C radio installed
• Factory assembled body complete with color scheme
• Syncro KT-232P transmitter
• Binding Stick
• Hexagonal wrench
• Cross wrench

Required to Run

• 4 x AA batteries for transmitter
• Battery for chassis
• Charger for battery for chassis
• Tools

Powerful racing buggy
easy to enjoy with this is EP Readyset! 

• 4 x AA batteries for transmitter - 2 x batteries for chassis 
  - Charger Required 2-4S 
• <Readyset Contents>
  
  - Factory assembled chassis complete with control linkages
  - Finished body complete with printed color scheme
  - 2.4GHz Syncro KT-331P+ transmitter
  - 1.5、2.0、2.5、3.0mm L shaped hex wrenches
  - Cross wrench
  - 17mm wheel wrench
• <Technical Data>
  
  - Length 490mm
  - Width 307mm
  - Height 180mm
  - Wheelbase 325 mm (can be changed with rear hub collar)
  - Tread (F/R) 254mm
  - Tire (F/R) φ116×44mm／φ116×44mm
  - Weight 3,370g (approx.)
  - Transmitter 2.4GHz Syncro KT-231P+
  - Motor　KYOSHO SPEED HOUSE TORX 8 Brushless Motor
• The worldwide status of the 1/8 scale buggy category has been built on a combination of high speed and dynamic fun. In recent years, EP (electric) buggies powered by batteries and electric motors have grown in popularity. Based on its celebrated 1/8 GP Inferno series buggy, Kyosho releases the electric powered Inferno MP10e Readyset! The new MP10e features significant updates but inherits the Inferno MP9e Evo. V2’s optimal weight balance from its left-right battery distribution that became adopted widely in 1/8 EP buggy designs. This layout also allows easier maintenance. Output characteristics of the KV2300 motor can be programmed on BRAINZ 8 ESC (electronic speed controller). With the R/C system pre-installed, you can be driving after unpacking the model and charging the battery. Equipped with the newly developed high torque and waterproof KS5071-09MW steering servo, the MP10e can handle the heavy loads of hard off-road driving. The cornerstone of the MP10e’s high performance and reliability is the suspension system, which is similar to the Inferno MP10 GP model. Not only can you outrun GP models with the Inferno MP10e; this high-powered electric machine is packaged as a Readyset with the racing potency to succeed at the highest level.
  
  ●Pre-assembled Readyset of the world-famous 1/8 scale buggy
  ●4WD shaft system makes full use of the brushless motor power and demonstrates exceptional traction stability.
  ●Forward mounting of heavy objects optimizes front-to-rear weight balance to realize more direct maneuverability.
  ●Includes pre-painted Inferno MP10e body with excellent aerodynamics that delivers superior stability through high speed corners.
  ●New servo and brushless motor with proven reliability provides the optimal combination of high-performance with the easy operation of electric power.
  ●Includes 2.4GHz KT-331P pistol-grip transmitter with LCD screen for various setting adjustments.
  ●Newly developed springs for the long diaphragm front and rear oil shocks deliver reliable consistency.
  ●Wide range of suspension settings are possible with bushes used with suspension shaft mounts.
  ●Enjoy tuning up your machine with a wide variety of optional Inferno parts.
  ●Standard R/C car tube battery and square type battery for the motor (sold separately) can be mounted.
  

Forward weight distribution realizes direct responsiveness for compliant maneuverability. Features fully assembled chassis equipped with powerful brushless motor unit and R/C system.

Oil shocks with metal cases are equipped as standard and deliver precision damping function with ultra-reliable consistency. Includes the same specification coil springs developed for the 2022 GP Buggy World Championship.

5mm metal front and rear shock stays provide robust crash resistance and the high rigidity to extract maximum effectiveness from shocks and springs.

High-power TORX 8+ brushless motor produces easy acceleration of the heavy chassis. Sliding motor mount allows easy adjustment of gear backlash.

The ESC (left) is a BRAINZ 8 that can withstand high loads and has 10 output programs to choose from. The receiver (right) is housed in a special case to protect it from dirt and damage caused by dirt and dust.

Newly developed high-torque steering servo is optimal for heavy 1/8 EP buggies. The receiver is equipped with a fail-safe function in the event of frequency interruption.

Wire guard neatly organizes the R/C system wiring on the chassis and is effective in preventing damage caused by wires getting caught in gears and other drive system parts.

Battery holder is compatible with most commonly available R/C car battery types. Simple hook-and-loop fastener allows battery to be easily secured and detached.

Same shape body as the Inferno MP10e kit is finished and mounted on the MP10e. Advanced aerodynamics contribute to improved rear grip and outstanding stability even through high-speed corners.

K-Blox tires are pre-glued to the wheels and included as standard to deliver exceptional grip on dirt as well as asphalt surfaces such as parking lots.

• UDI RC SNOWCLAW MONSTER TRUCK 1/16 BRUSHLESS RTR PRO - BLUE
  The 1/16 „UD1610PRO Monster Truck“ from UDI RC combines raw brushless power with a robust off-road design. With its powerful 2845 brushless motor (KV: 3800) and a precise 17g 3-line digital servo, it delivers impressive acceleration and control – ideal for high-speed runs on asphalt, gravel, or off-road.

  With 4WD drivetrain, metal pinion gear, and a 45A brushless ESC, the monster truck tackles demanding conditions. The massive 180 mm tires provide optimal grip, while the oil-filled shock absorbers and the robust multi-link suspension soak up even hard landings.

  The intelligent battery management protects against deep discharge and overload. With the 7.4V battery (1600mAh, XT60), the model reaches speeds of up to 40 km/h. Using an 11.1V battery, up to 65 km/h is possible.

  Features

  • 2845 brushless motor (KV: 3800) for high performance
  • 17g 3-line digital servo with metal pinion
  • Brushless ESC (45A)
  • 4WD drivetrain
  • Oil-filled shocks & reinforced multi-link suspension
  • Quick-disassembly design for body, differentials, and drive shafts
  • Thick-walled PVC body with nylon and PC (polycarbonate) parts
  • Heat-resistant aluminum heat sinks for motor & ESC
  • Intelligent battery management system
  • Top speed: up to 65 km/h (with 11.1V battery)

  Specifications

  • Scale: 1:16
  • Length: 292 mm
  • Width: 225 mm
  • Height: 133 mm
  • Wheelbase: 180 mm
  • Weight: Approx. 1.92 kg
  • Motor: 2845 brushless (KV: 3800)
  • ESC: 2.4GHz brushless ESC (45A)
  • Battery: 7.4V Li-ion 1600mAh (XT60)
  • Transmitter: 2.4GHz pistol-grip transmitter
  • Range: ≥100 m
  • Runtime: Approx. 12 minutes
  • Charging Time: Approx. 200 minutes

  What's Included

  • Factory-assembled model (RTR)
  • Brushless Motor
  • ESC
  • Digital Servo
  • LED Lighting
  • 7.4V Li-ion Battery
  • Charger, 2.4GHz
  • Transmitter
  • Manual.

Even more speed with brushless motor! With its muscular body and supercharger, this machine makes a visual statement to back up its powerful performance!

<Technical Data>

- Length 507mm
- Width （Body width） 195（210）
- Height 128mm
- Wheelbase 274mm
- Tread (F/R) F：167mm／R：167mm
- Tires (F/R) F：φ64x27.7mm／R：φ64x27.7mm
- Gear Ratio 6.54：1
- Weight 1680g (approx.)
- R/C system Syncro KT-231P+
- Motor TORX10E

<Readyset Contents>

- Completed chassis with R/C radio installed
- Factory assembled body complete with color scheme
- Syncro KT-231P+ transmitter
- Hexagonal wrench
- Spanner
- Setting change parts -

Full Readyset version with

• Battery GensAce Bashing LiPo 2S 7.4V-5000-60C (Deans) 136x48x25mm 250g G-Tech included
• Charger GensAce Charger iMars Mini 60W USB-C (2-4S)included

<Required for Operation>

- 4 x AA batteries for transmitter
- Tools

Designed and built for the pure enjoyment of R/C car driving, the FAZER Mk2 welcomes this brushless motor addition to the series. Powering up from the conventional G14L brushed motor to the TORX 10E brushless motor, the 1.6 x speed boost delivers 65km/h (up from about 40 km/h) backed up by the newly incorporated BRAINZ 10 speed controller, sintered pinion gear and aluminum HD center shaft L (previously an optional upgrade) to support the extra power and higher RPMs. This fully upgraded version of the VE specifications boasts an ultra-scale 1970 Dodge Charger body much loved in America, with a Kyosho designed supercharger, and features light buckets that can be equipped with front and rear LEDs and open/close function for concealed headlights. Kyosho’s original color scheme pays homage to the rebel image of this machine and this ‘1970 Dodge Charger Supercharger Spec VE Gray’ is packaged as a pre-built Readyset, so its easy even for beginners to enjoy without delay. Just use your own battery, battery charger and transmitter to experience the first brushless motor-powered model in the VE series!

- Ultra-scale body specifications feature concealed headlights with open/close function and a Kyosho designed supercharger. In addition, LED compatible headlights, taillights, wipers, mirrors, and fuel fillers are being designed.

- Install micro servo (sold separately), to operate the open/close function of the concealed headlights using the 3rd channel of the KT-231P + transmitter included in the Readyset.

- Elevate the scale finish by installing 97054 LED light unit series (sold separately) in the front and rear light buckets.

- Equipped with high-power TORX 10E motor. In addition, sintered pinion gear (32T) is equipped as standard to reliably transmit the full force from the motor.

- Waterproof BRAINZ 10 60A ESC with cooling fan provides stable power without heat loss.

- Equipped with vintage touring car (VTC) tires with compound optimized for brushless performance, and new color Rostyle-type wheel design to match the classic style of the Dodge Charger.

- Aluminum center shaft prevents twist and delivers high-RPM drive. Shaft-driven full-time 4WD touring chassis provides easy handling and is a joy to drive for anyone.

- Includes advanced functioning KS4031-06W steering servo as standard.

- Factory-completed Readyset only requires 4 x AA batteries for the transmitter as well as a charger and battery for the chassis.

- Full ball bearing specifications reduce drive loss in all drive components.

- Sealed differential and transmission realize excellent reliability, even in dusty parking lots.

- Equipped with a plated dummy brake disc and painted brake caliper for an elevated sense of scale.

- Uses hexagonal button screws throughout. Allows secure tightening torque to be applied and maintenance with fewer tools.

- Motor mount has mounting holes according to pinion gear, eliminating the need for tricky backlash adjustment. Supports pinions from 29T to 37T.

- Wide range of optional parts are available to further boost driving performance.

HD center shaft L is equipped as standard to prevent twisting and support high-speed performance. The simple and functional main chassis uses lightweight impact-resistant nylon to reduce weight and an integrated gearbox that optimizes torsional rigidity to deliver a low center of gravity. The simple upper-deckless design realizes strength through each component and section.

Equipped with the advanced functionality of the KS4031-06W steering servo. The front suspension optimizes bump steer and scrub radius for improved handling and features interchangeable front left and front right ball-connected steering knuckles that deliver smooth operation and high crash resistance.

High-powered TORX 10E brushless motor. The sealed motor case prevents foreign objects from entering the motor and gearbox.

BRAINZ 10 speed controller with cooling fan for brushless motors. Program settings can be changed to suit different conditions and it’s also waterproof so you can even run through the rain or small puddles.

Equipped with oil shocks as standard. Vehicle height can be adjusted by changing the included ball ends and spring spacers according to the vehicle type and setting.

Sintered 32T pinion gear is equipped as standard for reliable transfer of the high-powered force from the brushless motor. 68T and 32T are standard settings for spur gears and pinion gears respectively, however a total of 9 pinion gear variations from 29T to 37T are available to suit various motors for a wide range of gear ratio settings. In addition, set positioning of the motor according to the number of teeth of the pinion gear reduces problems with backlash adjustment..

Features VTA tires with compound optimized for brushless motor performance in combination with new color Rostyle type wheels.

Defining the era of American muscle, the unique characteristics of the ever-popular Dodge Charger have been recreated with concealed headlights equipped with open/close function (operated by optional micro servo on 3rd channel) and the Kyosho designed supercharger. The coke-bottle lines of the semi-fastback 2-door hardtop is immaculately reproduced in a 1/10 scale polycarbonate body.

Front and rear light buckets are compatible with the 97054 LED light unit series (sold separately). Install the LED light unit to recreate the ultimate Dodge Charger reality.

Sport 3 Porsche 911 GT3 RSR Falken

1:10 R/C JUMPSHOT ST V2.0

The Jumpshot ST V2 is the stadium truck version of the Jumpshot platform, and features a sleek racing body and low-profile tires which give it fantastic looks and great performance! The V2 version is packed with brand new features for maximum fun anywhere you drive it! For extra speed, the new 12-turn 550-size motor with optimized gearing is great for fast acceleration and high top speeds, and the durability improvements include new drivetrain gears, suspension parts and servo saver! 

Underneath the sleek racing body of the Jumpshot ST V2, the chassis is a Savage-style TVP (Twin Vertical Plate) design for a super-stiff chassis and center-balanced weight. The modular design of the chassis gives you simple maintenance and durable crash protection for all the electronics. The battery is quickly accessed from underneath the truck, so changing batteries is extra-fast for more driving fun! The Jumpshot ST V2 has also been updated with a brand new look that is bright and sure to grab the attention of all your RC friends! 

With a brand new, super-powerful, 12-turn, 550-size motor, the Jumpshot V2 trucks have tons of power for more fun! The bigger size of motor gives the Jumpshots tons of extra torque for fast acceleration and maximum jumping power, and the 12-turn construction means you"ll get extra-high RPM for superfast top speeds! Enhanced gearing from the new and improved pinion & spur gear combination means you get the best of both worlds: wild acceleration from a standing start, plus crazy fast top-end speed! And with the new T-plug battery plugs, you can easily fit in more powerful batteries for mind-blowing, ripping action! 

JUMPSHOT V2 - PACKED WITH FEATURES!

The Jumpshot V2 line-up is loaded with features that will keep you driving for hours! In the middle of the Savage-style TVP chassis, the radio box is protected from the elements, and the steering features not just a sturdy direct-link steering system but also a water-resistant steering servo for extreme protection. A powerful rear-wheel 2WD drivetrain lets you kick out the rear end for extreme fun, on-road or off! The new 12-turn, 550-size motor with its waterproof, LiPo-ready speed controller and optimized gear ratio gives you great acceleration and top speed, and the new extra-durable gears are much stronger than the original design. A newly designed servo saver and stronger upper suspension links also make the front end and steering extra-rugged for driving over the rough stuff!

Like all HPI cars and trucks, a complete set of ball bearings lets you get the most out of every battery pack without losing any power from the brushed motor fitted at the back of the chassis. This means you can blast through any type of terrain you want, whether it"s grass, mud, asphalt, gravel or anything else! 

• Factory-built Ready To Run 2WD stadium truck
• NEW! 12-turn 550-size motor for maximum power 
• NEW! Optimized gearing for great acceleration and top speed
• NEW! Metal idler gear in the transmission
• NEW! More durable spur and diff gears 
• NEW! Revised servo saver
• NEW! Strengthened suspension links
• Tough aluminum TVP chassis design
• Battery box fits 6- or 7-cell NiMH flat style stick packs and 2S LiPo packs
• Battery easily accessible from bottom of chassis
• HPI SC-3SWP2 Waterproof LiPo-ready ESC
• NEW! ESC fitted with high-power T-Plug 
• Enclosed receiver box
• 2.4 GHz radio system
• Oil-filled shock absorbers
• Double-wishbone suspension design
• Sturdy body mounts
• Standard 12mm hex hub wheel fitting
• Pick-up truck style body with the latest HPI graphics
• Large all-terrain tires
• Chrome 6-spoke wheels

COMPOSITE SERVO HORN - KO, JR, AIRTRONICS

COMPOSITE SERVO HORN - KO, JR, AIRTRONICS, MULTIPLEX

This is our demo model available for sale at any time. 
no box. Battery & charger is included 

Bring classic Italian utility style to your RC collection with this detailed RC scale tricycle from E-Zee RC. Inspired by the legendary Piaggio Ape and packed with character and charm, this unique three-wheeled model offers a driving experience unlike anything else on the RC market.

Designed with a true tricycle layout, the model features front-wheel steering, rear-wheel drive, and a rear differential, delivering realistic handling and plenty of personality whether you’re cruising smooth surfaces or exploring light off-road terrain. Its compact size and distinctive cab-forward design make it equally enjoyable to drive or display.

Scale realism is at the heart of the design, with engine detailing, sounds, a driver figure, LED headlights, and a simulated exhaust effect all helping to bring the model to life.

Supplied Ready-to-Run, this RC tricycle comes fully assembled and includes a rechargeable battery and USB charger, allowing you to get driving straight out of the box. Easy to use and full of character, it’s ideal for first-time RC fun, scale enthusiasts, and anyone looking for something a little different from the usual four-wheel RC vehicles.

Features

• Tricycle inspired by the iconic Italian Piaggio Ape.
• Unique three-wheel layout with front-wheel steering.
• Rear-wheel drive with differential for realistic handling.
• Compact cab-forward design.
• Detailed engine bay and scale driver figure.
• LED headlights for added realism.
• Simulated exhaust effect for extra character.
• Designed for smooth surfaces & light off-road.
• Supplied Ready-to-Run – fully assembled.
• Includes 3.7V 500mAH battery & USB charger.
• Includes obstacle cones and drums.