Clearances Lines

Aluminum upgrade series for the Tamiya MB-01, upgrade critical parts on the car to get more performance!

Feature:

• For: Tamiya MB-01 BT-01

• Material: Aluminum

• Color: Blue

Include:

• Tie-Rod Mount (1 pc)

• Screws (2 pcs)

• Ball Studs (2 pcs)

These wheels are the same size as all 1/10 touring car wheels and will accept any tyre from this scale range. (will not fit TT01E Euro Truck 1/14 tyres) For Scale comparison, please use Hobao H22319 1/10 Truck Tyres. 

(ONLY AVAILABLE IN GRAY)

4x Tyres Included

• Wheels Approx 26mm Wide (Diameter Fitment for 1.9inch wheels (12mm standard drive hex)
• Wheel Fitment Diameter: 1.9inch (1/10 Touring Car Scale)
• 2x Front and 2x Rear Wheels

Body Replica: Lexan bodyshell - Designed around the Chevy Nascar 

This shell is designed to fit any our NEW 1/12 SUPASTOX Chassis

The shell comes in clear Lexan plastic and is ready paint and cut out.

The dimensions of the shell are:

Length: 350mm approx

Width: 164mm approx

Height: 85mm approx

Wheelbase: 205mmto 210mm MTC (M-Chassis

Lexan Spoiler Included - NO HARDWARE INCLUDED - As these are custom made bodies, they may have tiny imperfections due to the moulding process, but is perfectly normal.

(Masking is included - However no stickers will be included - No stickers for lights, grills etc - most builders mask off the lights and grills and paint instead)

All body detailing will be down to the painter - or ask Frosty Models to print you some stickers inhouse at additional costs.

Aluminum upgrade series for the Tamiya MB-01, upgrade critical parts on the car to get more performance!

Feature:

• For: Tamiya MB-01 BT-01

• Material: Aluminum

• Color: Blue

Include:

• Aluminum Steering Post Mount (1 pc)

• Schumacher Foam Strips 40 x 6 x 2mm thk - pk20

This Yeah Racing Front Knuckle Arms for Tamiya TT02 are made from durable aluminum. The product has been designed to strengthen the steering system, which is a direct replacement to the stock part.

Feature:

• For: Tamiya TT02 TT02S

• Material: Aluminum

• Color: Blue

Include:

• Yeah Racing Aluminum Front Knckle Arm (2 pcs)
• M3 x 12 mm Screw (2 pcs)
• M3 x 10 mm Screw (4 pcs)
• Manual (1 pc)

Aluminum upgrade series for the Tamiya MB-01, upgrade critical parts on the car to get more performance!

Feature:

• For: Tamiya MB-01 BT-01

• Material: Aluminum

• Color: Blue

Include:

• Ball Bearing Steering Set (1 pc)

Intellect RX LiPo.

Designed for Xray Nitro cars with a shorter battery box.

1800mAh
2S
13.7*27.5*83mm
RX Connector - can be cut to fit RED JST plug.
58g
13.32Wh

Body Replica: ABS bodyshell

This shell is designed to fit any 1/12th Standard RC Car.

The shell comes in clear ABS and is ready paint and cut out.

The dimensions of the shell are:

Length: 330mm approx

Width: 160mm approx

Height: 130mm approx

Wheelbase: 205mm

NO HARDWARE INCLUDED - As these are custom made bodies, they may have tiny imperfections due to the moulding process, but is perfectly normal.

BRCA Legal 

(Masking should be included - However no stickers will be included - No stickers for lights, grills etc - most builders mask off the lights and grills and paint instead.

Body Replica: Lexan bodyshell

This shell is designed to fit any 1/12th Standard RC Car.

The shell comes in clear Lexan plastic and is ready paint and cut out.

The dimensions of the shell are:

Length: 350mm 

Width: 163mm

Height: 85mm

Wheelbase: 205mm

Lexan Spoiler Included - NO HARDWARE INCLUDED - As these are custom made bodies, they may have tiny imperfections due to the moulding process, but is perfectly normal.

(Masking should be included - However no stickers will be included - No stickers for lights, grills etc - most builders mask off the lights and grills and paint instead)

FITTED WITH 'T' DEANS PLUG

VOLTZ 4200mah ROUND/OVAL CASE 2S 40C 7.4V LIPO STICK PACK - DEANS

DESIGNED TO FIT CHASSIS'S THAT HAVE A CURVED BATTERY TRAY FITMENT, LIKE THE TAMIYA TT01E.

SPECIFICATIONS

• Capacity: 4200mah
• Voltage: 7.4v
• Max Cont. Discharge: 40c
  
• Weight: 300g (APPROX)
• Dimensions (mm): 138x46x25 (APPROX)

Spring loaded quick change battery holders for Tamiya's TT01 and TT02! Highly adjustable for different types of batteries, including different height posts to use with either normal or LCG batteries! Without using tape, the chassis is not under pressure and will not tweak!

Feature:

• For: Tamiya TT01 TT02

• Material: Aluminum 7075 / Plastic

• Color: Blue/Black
  

Include:

• Quick Change Battery Mounts (2 pcs)

This is Yeah Racing Drive Shaft Set Spring Steel For Tamiya M05.

Feature:

• For: Tamiya M03, M04,M05, M06,MB-01
• Material: Spring Steel
• Color: Brown and Silver
• Use small cup joint or TAMC-091 for Tamiya MB-01

Specification:

• Length: 62mm
• Weight: 10g

Include:

• Drive Shaft Set Spring Steel (2 pcs)
• Spare Parts
• Pin (2pcs)
• Spring (2pcs)