Tamiya 1/10 RC Car Bodies

Unpainted Body for the Tamiya TT01E Euro Truck Series.

Truck body to fit 190mm Touring and Rally cars. Supplied clear with window masks and overspray film. (SCALED TO A 1/14 TRUCK LIKE THE TT-1E CHASSIS) (FITS ALL 1/10 CAR CHASSIS'S)

Masking for windows included. Lights and grill stickers only included. Photo represents a painted model.

ASSEMBLY AND PAINTING REQUIRED - SEE OUR OTHER ITEMS FOR CURVED SCISSORS AND POLYCABONATE SPRAY PAINTS.

BD-GT-190AS1 Bittydesign ARES-1 1/10 GT Clear 190mm Body

ARES-1 is pure performance for the 1/10 GT class. Designed with the desire to create an unconventional body thanks to highly refined and extreme aerodynamic; ARES-1 moves the performance bar to a new level.

QUALITY without any compromise is the basis of everything we make, the ARES-1 body shell represents the perfect implementation of our philosophy that drives us to do better and that encourages us to make use of our know-how acquired in over 17 years of experience.

To achieve maximum performance, we tested the body several times and made radical changes to the original design, we wanted to make sure we could offer an absolute performance product that would become the new benchmark for the GT category.

The aerodynamics of the ARES-1 will surprise you because during development we put all our experience into it and optimised every detail with the focus on maximum performance. The ease with which this body will allow you to 'push' your limits will leave you speechless every time you use it on your model.

Features:

The body shell is UNIVERSAL and mounts on all 1/10 190mm models, the wing complies with the measures as per USGT regulation and can therefore be used at any race.

• Made with high quality and genuine polycarbonate Lexan®
• Included in the kit a complete set of screw, nuts and large plastic washers to fix properly the rear wing
• Produced only in Light Weight version
• Fit all the 190mm electric chassis on the market with 257-260mm wheelbase
• Sold clear with protective film outside
• Included in the package a decal sheet pre-cut and windows mask

The bodyshell is supplied clear as part of a molding and will require cutting and painting in order to complete.

190mm Wide / 256mm Standard 1/10 Car Wheelbase body for such as a Tamiya TT02.

Supplied unpainted - and may not match design, stickers might be limited to Lights & Grills. 

THIS IS THE LIGHTWEIGHT VERSION

BD-TC-190HYP Bittydesign HYPER HR 190mm Clear TC bodyshell - Light

HYPER-HR, a new contenderbody shell contender for the 1/10 190mm electric class

This project was born from the desire to further develop the first HYPER version by creating a new model similar in appearance but in fact totally redesigned to meet the needs of this ultra-competitive category.

The HYPER-HR body represents the best result of performance and aesthetics into the same product, a great mix with modern and aggressive look.

Premium Quality first of all

Our philosophy leads us not to settle for mediocrity or speculation, for each project we always pursue the same common thread: the best or nothing. To obtain products that fully meet our expectations, we dedicate months of virtual design and rendering in order to allow us to evaluate any improvements or details to be corrected.

QUALITY without any compromise is the basis of everything we make, the HYPER-HR body shell represents the perfect implementation of our philosophy that drives us to do better and that encourages us to make use of our know-how acquired in over 15 years of experience.

Bittydesign Engineering is synonymous with guarantee, authenticity and innovation.

Product Features

The body shell complies with all EFRA, IFMAR, ROAR, BRCA and FEMCA homologation specs, so it can be used in any National and International race.

• Made with high quality and genuine polycarbonate Lexan®
• Included in the kit a complete set of screw, nuts and large plastic washers to fix properly the rear wing
• Produced in Light Weight version as well also Ultra Lite (ULT)
• Fit all the 190mm electric chassis on the market with 257-260mm wheelbase
• Sold clear with protective film outside
• Included in the package a decal sheet pre-cut and windows mask

Made with one target: the excellence

The design, inspired by a real car and adapted to the measurements necessary for homologation took several months to optimize every single detail, the search of perfection has been obsessive in order to propose a body shell that could best enhance the aerodynamic study that the project involved.

HYPER-HR is a touring body with a modern look and that responds to market demand, in the course of several months of tests on the track, changes were made several times to the original project as we wanted to be sure to offer a product that could excel in the 190mm category, step by step we have reached an optimal level of performance and balance.

HYPER-HR redefines the concept of QUALITY.

You will be surprised by the precision and details of the body. HYPER-HR is made to amaze you.
HYPER-HR redefines the concept of QUALITY.
You will be surprised by the precision and details of the body. HYPER-HR is made to amaze you.
HYPER-HR redefines the concept of QUALITY.
 You will be surprised by the precision and details of the body. HYPER-HR is made to amaze you.
 3D Cad design & engineering

In order to respect our quality standards, we have not set any limits and we have realized the HYPER-HR project with the use of the most advanced graphics and Cad design; this process guarantees a perfect execution of the forms and details that high-tech machinery realize with 5-axis CNC milling machines.

The product we deliver in the hands of the enthusiast represents the best available on the market today, we exploit and make full use of the most advanced technology to guarantee a result that represents at best the Italian excellence.

190mm Wide / 256mm Standard 1/10 Car Wheelbase body for such as a Tamiya TT02.

Supplied unpainted - and may not match design, stickers might be limited to Lights & Grills. 

Bittydesign CA45 1/10 FWD 190mm Clear Bodyshell

BD-FWD-CA45 Bittydesign CA45 1/10 FWD 190mm Clear Bodyshell

CA45, a new contender for the 1/10 190mm FWD class!

This project was born from the desire to create a new body that could gather the experience accumulated with our previous FWD bodies but with different aerodynamic solutions in order to obtain the maximum possible performance for this category.

The CA45 body represents the best result of performance and aesthetics into the same product, a great mix with modern and aggressive look.

Premium Quality first of all
Our philosophy leads us not to settle for mediocrity or speculation, for each project we always pursue the same common thread: the best or nothing. To obtain products that fully meet our expectations, we dedicate months of virtual design and rendering in order to allow us to evaluate any improvements or details to be corrected.

QUALITY without any compromise is the basis of everything we make, the CA45 body shell represents the perfect implementation of our philosophy that drives us to do better and that encourages us to make use of our know-how acquired in over 15 years of experience.

Bittydesign Engineering is synonymous with guarantee, authenticity and innovation.

Features:
The body shell is UNIVERSAL and mounts on all 1/10 190mm models, both those specially developed by the manufacturers for the front-wheel drive (FWD) category and also those with traditional 4WD chassis (touring).

Made with high quality and genuine polycarbonate Lexan®
Included in the kit a complete set of screw, nuts and large plastic washers to fix properly the rear wing
Produced only in Light Weight version
Fit all the 190mm electric chassis on the market with 257-260mm wheelbase
Sold clear with protective film outside
Included in the package a decal sheet pre-cut and windows mask

Designed for maximum performance
The shapes inspired by a real car have been adapted to the proportions and measurements necessary for use with the 190mm electric models; the design phase took several months, the attention to details was obsessive in order to propose a body shell that could optimize aerodynamics while remaining faithful to the original shapes.

If the main intent was that of performance alone at the expense of aesthetics, the finished project resulted in a body with a breathtaking look, with TCR-style widened wheel arches and a harmony of shapes and proportions that make the CA45 both beautiful for pleasure of the eye is remarkably fast.

This spare body parts sets each feature clear polycarbonate body, separately-molded parts for side mirrors and rear wing, sticker sheet, and masking stickers. Create your own custom paint scheme with Tamiya Polycarbonate Spray Paints.

*Compatible Chassis: TA05, TA04, TT-01, TGS, TNS, TB-02, TB-01, TL-01, TB Evolution IV, TRF415, TG10-Mk.1 (Excluding short wheelbase and wide tread chassis)

R/C Body Set

Sold as seen, appears to have no real cracks and have untested lights fitted 

This new body parts set provides GT-R fans the opportunity to design another great looking body for the ever beautiful Nissan Skyline GT-R (R32).

Width: 187mm, Length: 452mm, Wheelbase: 257mm.
Can be used with TT-01 and TT-01 Type-E chassis cars.
Wide treads on the rear of some chassis must be changed to narrow treads.
Not for use with short wheelbase chassis machines.

The AGATA project was born from the desire to offer to the rc enthusiast all over the world a body shell that could recall our origins, Emilia land of engines and dream car manufacturers.

Tested over several months on different carpets and asphalts, the body is a new alternative for drivers who not only aim for pure performance but also seek an aesthetic satisfaction fully satisfied by the unique shapes and lines of AGATA.

The AGATA project represents the highest level in the RC industry in terms of development and engineering. We haven't set any limit and with the help of expert team of engineers we have developed a brand new product that features amazing details in terms aesthetic and aerodynamic. 

A parternship with Italian leading CNC factory allowed to obtain the maximum level of precision and quality possible today; we are proud supporters of the real Made in Italybased on the creation, passion and pure innovation.

The design recalls the shapes of the dream-car produced in Emilia, the phase of refinement took several months to optimize every detail, the search of perfection has been obsessive in order to propose a body that could honor our Italian excellence.

AGATA is a GT body with a stunning look, the lowered front nose generates an excellent steering while the wide cab and the neutral sides stabilize the air flows that conveyed into the large rear wing make the model easy to drive, the body is well balanced and does not undermine the set-up of your car.

The body shell meet the specifications needed to participate in any 1/10 GT race in the world, USGT class included.

• Made with high quality and genuine polycarbonate Lexan®
• Included in the kit a complete set of screw, nuts and large plastic washers to fix properly the rear wing
• Front foam (laser cut) to avoid the vibration of the front nose of the body included into the kit
• Produced in Light Weight version, thickness of material 0,75mm
• Sold clear with protective film outside
• Included in the package a decal sheet pre-cut and windows mask

The AGATA project was born from the desire to offer to the rc enthusiast all over the world a body shell that could recall our origins, Emilia land of engines and dream car manufacturers.

Tested over several months on different carpets and asphalts, the body is a new alternative for drivers who not only aim for pure performance but also seek an aesthetic satisfaction fully satisfied by the unique shapes and lines of AGATA.

The AGATA project represents the highest level in the RC industry in terms of development and engineering. We haven't set any limit and with the help of expert team of engineers we have developed a brand new product that features amazing details in terms aesthetic and aerodynamic. 

A parternship with Italian leading CNC factory allowed to obtain the maximum level of precision and quality possible today; we are proud supporters of the real Made in Italybased on the creation, passion and pure innovation.

The design recalls the shapes of the dream-car produced in Emilia, the phase of refinement took several months to optimize every detail, the search of perfection has been obsessive in order to propose a body that could honor our Italian excellence.

AGATA is a GT body with a stunning look, the lowered front nose generates an excellent steering while the wide cab and the neutral sides stabilize the air flows that conveyed into the large rear wing make the model easy to drive, the body is well balanced and does not undermine the set-up of your car.

The body shell meet the specifications needed to participate in any 1/10 GT race in the world, USGT class included.

• Made with high quality and genuine polycarbonate Lexan®
• Included in the kit a complete set of screw, nuts and large plastic washers to fix properly the rear wing
• Front foam (laser cut) to avoid the vibration of the front nose of the body included into the kit
• Produced in Light Weight version, thickness of material 0,75mm
• Sold clear with protective film outside
• Included in the package a decal sheet pre-cut and windows mask

190mm Wide / 256mm Standard 1/10 Car Wheelbase body for such as a Tamiya TT02.

Supplied unpainted - and may not match design, stickers might be limited to Lights & Grills. 

Bittydesign Eptron 1/10 TC 190mm body

Premium Quality first of all

Our philosophy leads us not to settle for mediocrity or speculation, for each project we always pursue the same common thread: the best or nothing. To obtain products that fully meet our expectations, we dedicate months of virtual design and rendering in order to allow us to evaluate any improvements or details to be corrected.

QUALITY without any compromise is the basis of everything we make, the eptron body shell represents the perfect implementation of our philosophy that drives us to do better and that encourages us to make use of our know-how acquired in over 15 years of experience.

Bittydesign Engineering is synonymous with guarantee, authenticity and innovation.

Product Features

The body shell complies with all EFRA, IFMAR, ROAR, BRCA and FEMCA homologation specs, so it can be used in any National and International race.

• Made with high quality and genuine polycarbonate Lexan®
• Included in the kit a complete set of screw, nuts and large plastic washers to fix properly the rear wing
• Produced in Light Weight version as well also Ultra Lite (ULT)
• Fit all the 190mm electric chassis on the market with 257-260mm wheelbase
• Sold clear with protective film outside
• Included in the package a decal sheet pre-cut and windows mask