Orca

This is ORCA 800 Series V2.0 80A Water-Resistent Brushed ESC with Programmer has received a make-over and update to its spec

Features:

• ESC Brushed Motor System
• Same Small Footprint and size
• Aluminium lower case
• Water-Resistent
• 80A High Current Output
• LED Program Card with 14 programmable parameters
• **NEW** – BEC current now 5 amp
• **NEW** – Output current can now be adjusted between 6v and 7.2v
• **NEW** – Built-In touch type power switch
• **NEW** – Optimized software resulting in even better performance

Included In Box:

• ORCA 800 Series 80A Brushed ESC (1 pc)
• LED Programmer

Introducing the ORCA RunPlus Brushless/Brushed ESC with Program Card, the perfect addition to your r/c car or truck. Measuring at just 29.5mm x 29.7mm x 17.6mm, this ESC is very compact and extremely lightweight, making it the ideal choice for those looking for a easy-to-use ESC.

With its attached power wires, this ESC is incredibly easy to install, making it a great choice for beginners and experienced hobbyists alike. Plus, with a 80A continuous current limit, it can handle all 540-size brushless motors up to 13.5 turns/3600kv, Brushless 380 or 390 sized motors up to 10.5 turns/4600kv as well as Brushed motors over 12 turns too.

Included with this ESC is an LED program card, which allows you to fine-tune your settings.

Specification;

Dimensions: 29.5mm x 29.7mm x 17.6mm

Weight: 22g (excluding wires)

Voltage Input: 6-12.6V (LiPo 2-3 Cells)

Peak Current: 310A

Continuous Current: 80A

Motor Limit (Brushless): Over 10.5T

Motor Type: 540 Sizes Brushless and Brushed motors – 380 sized Brushless motors

BEC: 4A 6V/7V

Non-updateable firmware – ideal for spec races

Includes both Blinky Mode and Turbo functions

LED program card with 15 adjustable parameters

Suitable for on-road, off-road, crawlers and all recreational vehicle type

The latest ORCA sensor wire is flat, with low resistance silver wire coated in clear teflon for a super flexible solution – 200mm long

Specifications

• Includes 1 flat sensor wire
• Silver conductor wire (low resistance)
• Anti wear teflon coating
• 10% tighter fit than regular sensor cables

Supports all ORCA “OE” ESC’s;

• OE1
• OE101
• OE101S
• OE1-1S
• OE1-1S Mk2 Pro
• OE1 Mk2 Pro
• OE1 WLEB
• OE1.2
• TOTEM 1S
• TOTEM 2S

Does NOT work with “RunPlus” or “800 Series” speed controllers

ORCA present their powerful capacitor for the ESC. Suitable for 1cell – 2cells LiPo and 2cell – 3cell LiFe, improves your ESC performance.

ORCA introduce the Stock GT series, designed for the stock classes with s specific motor or as a controlled handout with fixed timing.

Some racing series use only motors with fixed timing to stop letting technology decide and become the winner. This is where ORCA wants to contribute its expertise to ensure fair competition for all with any fixed timing racing.

Feature:

• For 1/10th RC Blinky racing
• Material: Metal
• Color: Black
• New Variable PWM firmware (Variable PWM for Throttle & Brake)
• No +/- Reverse Protection
• 15F Super Capacity (Special designed for Stock racing)
• 12AWG High Quality Copper Power Cable

Included:

• ORCA 160A OE1 WLEB Open Box Blinky ESC
• 15F Super Capacity
• 12 gauge wire
• 30mm Cooling fan

Introducing the ORCA OE1 MK2 PRO ESC For 1/10th RC Cars. 

With the OE1 Mk2 Brushless Pro ESC, ORCA has developed one of the very most advanced ESC’s in the RC market today. The OE1 Mk2 allows multiple parameters to be set (with ESC Programme Card or the new ORCA Blucon Bluetooth module to connect a smartphone for programming, sold separately).

Equipped with a powerful 32-bit processor and ultra high performance FETs with low internal resistance for the ultimate in smooth sensitive control. Capacitors and reverse polarity protection are all integrated in the housing. This means the OE1 Mk2 is ready to dominate straight from the box.

Features:

• For: 1/10 RC Car

• Motor Limited > 3.5T 

• Material: Aluminium

• Color: Black

• Polarity Reverse Protection

• Built-In Internal Capacitor

• Detachable on/off switch, ESC is always on when on/off switch disconnected

• New CPU, Newly Design Circuit Board and Lower IR MOSFET’s

• Ultimate Brushless System

• 32 bit Processor

• Multiple Adjustable Parameters (adjusted by an optional Blucon module via Android / iOS smart phone or by an optional OE1 Program card)

Specification:

• BEC : 8A 6V / 7.2V

• Peak Current 760A

• Continuous Current 160A

• Motor limit 3.5T

• Motor Type: Brushless sensored 540 size Motor

• Voltage input : DC 6V – 9V

• Dimensions : 31(L) x 35(W) x 19.8(H) mm

• Weight : 43.3g excluding wires

Introducing the ORCA OE1-1S MK2 PRO ESC For 1/12 RC Car. 

With the OE1 -1S Mk2 Brushless Pro 1S ESC, ORCA has developed one of the very most advanced ESC’s in the RC market today. The OE1-1S Mk2 allows multiple parameters to be set (with ESC Programme Card or the new ORCA Blucon Bluetooth module to connect a smartphone for programming, sold separately).

Equipped with a powerful 32-bit processor and ultra high performance FETs with low internal resistance for the ultimate in smooth sensitive control. Capacitors and reverse polarity protection are all integrated in the housing. This means the OE1-1S Mk2 is ready to dominate straight from the box.

Features:

• For: 1/10 or 1/12 RC Car

• Motor Limited > 4.5T 

• Material: Aluminium

• Color: Black

• Polar Reverse Protection

• Built-In Internal Capacitor

• Detachable on/off switch, ESC is always on when on/off switch disconnected

• Detachable receiver cable , ESC comes with 200mm wire, optional 105mm and 300mm BEC wires also available seperately

• New CPU, Newly Design Circuit Board and Lower IR MOSFET’s

• Ultimate Brushless System

• 32 bit Processor

• Multiple Adjustable Parameters (adjusted by an optional Blucon module via Android / iOS smart phone or by an optional OE1 Program card)

Specification:

• BEC : 8A 6V / 7.2V

• Peak Current 760A

• Continuous Current 160A

• Motor limit 3.5T

• Motor Type: Brushless sensored 540 size Motor

• Voltage input : DC 3.7V – 4.4V

• Dimensions : 30.54(L) x 34(W) x 13.75(H) mm

• Weight : 29.3g excluding wires

The latest ORCA high end ESC, the OE1.2 is a 2-4S capable brushless speed controller, developed especially for high load applications.

Featuring  a mighty 200A continuous current rating makes it perfect for the likes of 1/8 off-road, drag racing, touring car applications and more where power is essential.

The small footprint of just 25.5 x 39.4 x 23mm make this speed controller a comfortable fit in most 1/8th cars while still being capable of handling motors up to 2400kV.

Specifications:

Dimensions: 35.5 x 39.4 x 23mm

Weight: 59g

Input Voltage: 7.4-14.8V | 2-4S LiPo

Peak Current: 950A

Motor Limit: Over 3.5T (@ 2S LiPo) | Under 2400kV (@ 4S LiPo)

BEC: 5A | 6V / 7.2V

Features:

• For ESC

• Material: Metal

• Color: Black

• For use with all 1- 2S ESC from Stock to Modified classes.

• Orca’s ONPC is one of the smallest and lightest of such capacitors in the market.

• Orca’s ONPC provides the best of both size and performance to give you the extra edge over your competition.

Specification:

• Size: 20.5mm x 16mm x 6.9mm

• Weight: 7.4g

• Max Voltage: 16V

• Capacity: 1700uF (36pcs)

Features:

• For ESC

• Material: Metal

• Color: Black

• For use with all 1- 2S ESC from Stock to Modified classes.

• Orca’s ONPC is one of the smallest and lightest of such capacitors in the market.

• Orca’s ONPC provides the best of both size and performance to give you the extra edge over your competition.

Specification:

• Size: 20.5mm x 16mm x 6.9mm

• Weight: 7.4g

• Max Voltage: 16V

• Capacity: 1700uF (36pcs)

The latest ORCA sensor wire is flat, with low resistance silver wire coated in clear teflon for a super flexible solution – 160mm long

Specifications

• Includes 1 flat sensor wire
• Silver conductor wire (low resistance)
• Anti wear teflon coating
• 10% tighter fit than regular sensor cables

The latest ORCA sensor wire is flat, with low resistance silver wire coated in clear teflon for a super flexible solution – 120mm long

Specifications

• Includes 1 flat sensor wire in

Introducing the all-new ORCA Blucon onboard programming module. Now all ORCA speed controllers can be configured in an ultra easy user-friendly and modern way.

All adjustable parameters can be conveniently selected and set using the “ORCA Blucon App”.

With this upgrade, ORCA offers ambitious racing drivers the opportunity to configure their controller easily and efficiently on their smartphone or tablet for every track and to read out the data during the race or Training.

Find the App Download here:

• Apple – ORCA Blucon on the App Store
• Android –  ORCA Blucon on the Google Play store

The Blucon is fully compatible with all ORCA ESCs that are currently using the ORCA OE1 programming box.

• BP1001 Blinky Pro
• OE1
• OE1 Mark II
• OE1 WLE World Limited Edition
• OE1.2 2-4cells
• OE101
• OE101S (1S)
• OE1-1S
• OE1-1S Mark II
• Totem
• Totem-1S

he ORCA Totem 1S 1/12 brushless esc is ORCA’s latest stock spec speed Controller developed for 1/12th LMP12 and GT12 pan cars.
It features a continuos current rate of 100A, which is enough for up to 10.5T motors while using the included fan mounted on top of the esc.
The 23.5g light Totem 1S esc comes with reverse polarity protection and integrated capacitors for a even smaller footprint that is just 25.8mm wide. 
Centrally located cable outputs at the rear of the ESC.

Specifications:

Dimensions: 25.8mm x 33.6mm x 17.6mm

Weight: 23.5g

Voltage Input: 3-4.35V

Peak Current: 380A

Continous Current: 100A

Motor Limit: Over 10.5T

Motor Type: Sensored 540 sized brushless motors

BEC: 3A | 6V-7V

Multi Protection System: Yes

ORCA’s latest stock spec Speed Controller – the Totem 2S.

Featuring a continuous 100A current rate, which is enough for up to 10.5 turn motors while using the included fan mounted to top of the ESC.
The Totem is light too, weighing in at just 23.5g, it comes with reverse polarity protection and integrated capacitors for a even smaller chassis footprint.

Specifications:

Dimensions: 23.8 x 33.6 x 17.6mm

Weight: 23.5g

Voltage Input: 6 – 8.7V

Peak Current: 380A

Continuous Current: 100A

Motor Limit: Over 10.5T

Motor Type: Sensored 540 sized brushless motors

BEC: 4A | 6V-7V