Elceram

Excellently pre-glued Tamiya mini tyres, new 5 spoke design wheel in 'Flex' material, more grip and less chance of breaking.

55mm diameter
24mm width
12mm Hex
4mm Axle Hole

With all preglued tyres it is the racers responsibility to check the gluing before each run, and to add additional glue if necessary.

OXIDE 1/10 G2 is a new generation electronic speed controller for sensored Brushless DC motors. Using Advanced Cooling Technology based on Aluminium Oxide Ceramic cooler, Oxide 1/10 has excellent thermal conductivity and can be used with powerful motors from 6T up.

OXIDE 1/10 G2 brings revolutionary battery current and discharge real-time monitoring and Innovative Intelligent Algorithms to protect ESC in case of motor failure or mechanical issue.

OXIDE 1/10 G2 is featured with reverse polarity protection.

OXIDE 1/0 G2 has TFT matt surface LCD colour display and no other interface is needed. Simple settings adjustment with 3 buttons on display.

Programmable parameters and functions:
•Revolutionary simple Rx calibration.
•Real time monitoring: battery voltage, ESC and motor temperatures, motor diagnostics and more.
•Revolutionary battery current and discharge monitoring.
•Pre-race diagnostics: motor temperature, sensor cable, bad motor, battery, BEC voltage and more.
•Easy programming: throttle, brake, boost and turbo timing, Hall angle and many other functions.
•Race data logging, temperature and other curves, histograms and more. Data will be saved after turn of the ESC.
•Adjustable maintenance reminder for easy checking.
•No programming interface required.

Key Features:
•TFT LCD colour display, matte finish - LCD colour display with a resolution of 160 x 80 pixels allows you to set all the parameters and check all the data directly on your ESC, without the need for a programming card or a mobile application. Everything you need is inside your ESC.
It is really easy to use - 3 buttons allow you to quickly set everything you need and a single view is enough to check all the parameters necessary for the race. Simple. Fast. Accurate.
•Easy Check and Set - The display gives you an overview of all the important data and events - before the race, during the race and after the race. You can change your settings quickly and get instant feedback, without the delay of connecting an external control interface.
•Advanced Cooling Technology - OXIDE Featured Advanced cooling technology based on Aluminium Oxide heatsink, specially developed for OXIDE, gives the ESC excellent thermal conductivity and long-term resistance to high temperatures and loads.
MOSFETs transistors are cooled directly without any additional thermal resistance layer!
During production, ELCERAM used very thick layers of special materials such as silver and copper for very low internal resistance and the latest technologies inspired by advanced power systems designed and manufactured by ELCERAM.
•For even better cooling OXIDE 1/10 G2 features additional aluminium cooling thins and a connector for Intelligent FAN, if it is needed in special conditions.
•Reverse polarity protection.
•Intelligent algorithms for ESC protection.
•Dimensions - Despite having so many great new features, the OXIDE 1/10 G2 is really compact and even smaller than Generation 1. Its dimensions are suitable for all types of 1/10 RC cars.
What is more, 70% of the weight is on the underside of the ESC, giving your car even greater stability!
•Easy installation - installation of OXIDE 1/10 is quick and easy – using double-sided tape included in the package.
•In addition, the cover of ESC with display and buttons is able to be changed simply in case of any accident.

Specification:
•Type:
Scale: 1/10th Onroad and Offroad, Stock, Open Stock, Modified, Drift and other categories
Brushless
Sensored
•Waterproof: No
•Polarity protection: Yes

•Relevant parameters:
Cont./Peak Current: 160A / 1500A
Input Voltage: 2S LiPo
BEC Output adjustable voltage: 6.0 - 7.4V
BEC current Cont. / Peak: 6A/12A

•Size and weight:
Width: 34 mm
Length: 36,5 mm
Height: 20 mm
Weight: 50 g without wires
BEC cable length: 180 mm, grey stripe is minus pole

•Applications:
Applications: Sensored Brushless DC Motors from 6T up
Vehicles: 1/10 Buggy, TC and other cars
•Zero Timing (Blinky Mode) supported.
•External capacitors needed (included in package)

Introducing the BAT-SAFE XXL.

A huge version with some serious capacity for charging and storing LiPo batteries.

LiPo batteries can be dangerous and BAT-SAFE provides the safest experience over all others.  Whether for storing, transporting or most importantly charging.

We highly recommend that all LiPo batteries should be charged and stored in a BAT-SAFE box and not a LiPo bag.

The BAT-SAFE is a double-walled insulated steel box with a flame arrestor. Any battery within the specifications will not be a fire hazard if charged or stored inside the BAT-SAFE.

In case of a fire, the smoke and soot is also filtered by the flame arrestor.

Don't just take our word for it, check out the many reviews on youtube.





Includes charger stand and velcro.

Please note : The lightweight aluminium external sheet of the Bat-Safe can be damaged if care is not taken when unboxing.  Do not use the handles on the Bat-Safe to remove it from the shipping carton.  

External dimensions of 30cm width x 22cm depth x 68cm height.

Internal dimensions of 24.5cm width x 16.5cm depth x 60cm height.

Max Battery capacity. 6pcs 6S (22.2V) 5000mAh or 750Wh equivalent.

The kit shaped wing for the Cougar LD3 the 'Trident' is suitable for all 1/10th 2WD and 4WD buggies.

1.0mm thick.

6.5 inch wide the Trident is a great all rounder.

Made from polycarbonate and supplied with an awesome Carbon Fibre look.

RipTech Performance titanium screw kits

Why Titanium? The standout feature of these titanium screw kits is their approximate 45% weight saving over standard steel screws. Titanium is renowned for its exceptional strength-to-weight ratio, making it the ideal choice for competitive RC racing. Shedding excess weight allowing for a better balance and lower COG for quicker acceleration, improved cornering, and increased overall speed.

Content: The kits includes all the top side screws you'll need for your car (please note: it does not include under chassis screws as they are not required for performance), ensuring a hassle-free upgrade process.

Improved Handling: The reduced weight provided by our titanium screws enhances your cars balance and responsiveness. Your car will corner sharper, accelerate faster, and maintain better stability, giving you the competitive edge you've been looking for.

Precision Craftsmanship: Our screws are machined to perfection, guaranteeing consistent quality and performance.

Proven Results: RC racers have experienced significant performance improvements with our titanium screws.

Easy Installation: Replace your stock screws with our titanium ones using standard RC 2mm hex tool.

Images are to show product only, quantity and size will vary to your specified kit.

Technical
- The 2020 batteries are ALL NEW cell constructions, they are not new stickers on the old batteries!!!
- The Graphene 4 batteries build on the bench mark Graphene 3 batteries, have higher capacity for both Modified and Stock types with Stock Spec batteries also having higher power additionally.

Design
- Design wise we continued the trend to a darker, more technical appearance which we started in 2019.
- Batteries still have the same see through blue case as in 2019.

BRCA Legal from April 2020

HV LCG MODIFIED GRAPHENE-4
#431271
Ideal weight for 1/10 TC racing combined with Low Center of Gravity design and increased capacity. Perfect car balance and power for fast modified tracks.

47 x 139 x 22.5mm

274g

5mm plugs

50.92Wh

EDS Tools are the finest quality tools you can buy. Top materials make for reliable use and long life.

EDS Tools are the finest quality tools you can buy. Top materials make for reliable use and long life.

EDS Tools are the finest quality tools you can buy. Top materials make for reliable use and long life.

2-Force X5 is a dual-channel smart charger designed for professional RC model racing users, combining high-performance power management technology, exceptional user interaction, and a variety of operational modes.

Whether for battery activation before high-intensity races or multi-task power support on-site, the 2-Force X5 delivers robust power and stable performance, ensuring reliable support for every RC racer.

Design & Compatibility
Easy to carry and fit into your workstation or racing pit area.

Weighs 1.5kg

Measuring
172 mm (L)
130 mm (W)
101 mm (H)
High-gloss coated polymer shell with scratch-resistant surface treatment, providing a glossy and sleek exterior that reflect quality and style.

Charging Performance
Particularly designed for high-C rate competition batteries, fast, safe, and efficient, with a maximum charging current of 55A, and supporting charging power up to

AC - 500W
DC - 1400W

2A power balancing current: Built-in performance improving balancing system for faster and more accurate voltage regulation, therfore improving battery power output, consistency and extending its lifespan.

Dual-Channel Independent Operation
Independent circuit design supports synchronized battery management, improving charging efficiency.

Multi-Mode Functions
The 2-Force X5 offers multiple extended functions, including external discharge, two-in-one charging, and digital power supply modes, meeting diverse needs from daily maintenance to race tuning. It reduces racer workload and enhances overall value.

Safety & Protection
Comprehensive safety features include over-voltage, over-current, short-circuit, reverse polarity, and over-temperature shutdown.
These protections ensure reliable performance under any condition.

- Over-voltage
- Reverse Connection
- Over-current
- Over-temperature
- Short-circuit

Thermal Management & System Stability
Efficient Cooling System: The intelligent cooling fan system, paired with large ventilation holes, offers superior thermal management to ensure stable operation during high-power or extreme thermal conditions.

Additional Features & Interfaces

Servo Testing Interface
Equipped with a dedicated servo test port for easy operation and quick testing of servo functionality and response, ideal for on-site calibration.

12V DC Multi-Function Output
Provides stable 12V DC output, powering auxiliary devices such as tire warmers, soldering irons, and other RC tools for race and maintenance needs.

USB-C Firmware Upgrade
Easily upgrade the firmware via the USB-C
port to continuously optimize the charging experience.

Specification

Input Voltage - AC 100-240V 50/60Hz 6.5A (Max)DC 12-30V 65A (Max)
Output Voltage - DC 5-30V
Max Charging Power - AC 500W / DC 700W × 2(AC charging limited to 400W when DC 12V output is active)
Max Charging Current - 40A (normal), 55A (Synchronous)
Max Discharge Power - 70W × 2 (internal), 500W (external)
Max Discharge Current - 8A
Balancing Current - 2A / Cell Max
Supported Battery Types - 1-6S LiPo / LiFe / LiIon / LiHV1-18S NiMH
USB-C Output - 5V / 2A (10W)
XT60 DC Output - 12V / 100W
Servo Test Port Output - 5V / 0.5A (2.5W)
LCD Screen - 3.5-inch IPS sunlight-readable display
Operating Temperature -10℃ ~ 45℃
Storage Temperature -20℃ ~ 60℃

Package Contents
Servo Port Dust Cover - 1 pc
Balance Port Dust Cover - 1 pc
Power Cable - 1 pc
USB Upgrade Cable - 1 pc
Dust Cover Installation Guide Card - 1 pc
Team Cayote Sticker - 1 pc
User Manual - 1 pc
Team Cayote Custom Green Adapter Cables (Wired Version Only) - 2 pcs

Linear Power Response - Precision Control at Your Fingertips
The Team Cayote CREST Modi competition motor ensures smooth and accurate performance with its exceptional linear output and ultra-precise power response. It maintains consistency between input and output signals during both acceleration and deceleration, preventing stutters or glitches. The built-in high-precision Hall sensors and a precision balanced magnet rotor enhance stable power across a very wide torque range, maintaining control sensitivity and precision power demands of professional racing.

BRCA Legal from 01/09/2025

Efficient Heat Dissipation Design
The Team Cayote CREST Modi motor features an innovative cooling design with large ventilation holes on both end caps, while a center structure exposes the stator core directly to air for optimal cooling. This setup minimizes heat buildup while maintaining a stable operating temperature even under extreme use. The efficient heat dissipation improves durability and ensures consistent power output in high-load and high-temperature environments.

Unmatched Burst Power for Unstoppable Performance
The CREST Modi motor delivers powerful burst performance with its advanced linear power system and efficient rotor design. It responds instantly, providing maximum torque when needed. Whether accelerating off the line or powering through high-speed sections, this motor excels in any high-load or high-speed environments.

High-Temperature Resistant Rotor Design
The Modi features a high-temperature resistant magnet built to withstand temperatures up to 220°C. Even under high-load, high-temperature conditions, the rotor resists heat-induced cracks, ensuring reliable performance and durability. This design ensures consistency no matter the conditions, therefore allowing you to push the limits with full confidence.

Convenient Disassembly for Effortless Maintenance
The innovative rebuildable design makes maintenance and cleaning quick and easy. This user-friendly feature ensures simple, regular checks, reducing malfunctions and keeping your motor at peak performance longer. Spend more time on the track, while enjoying consistent power and reliability.

Seamless Precision Control Functions
In combination with Team Cayote's Crest X and EVO ESC series, and our advanced continuous angle adjustment technology, Modi motors offer more tuning options and enhance control. The "infinite adjustment system" feature lets users fine-tune output instantly via our APP, ensuring responsive, immaculate handling in any situation.

Suggestion Application
1/10 Off-Road
Suitable for 1/10 off-road/truck racing.
1/10 On-Road
Suitable for 1/10 on-road racing.

Introducing from Aerox, the first handed Body Clips we have available.

In the world of highly competitive RC racing it can be the small details that make the difference.

Included in the pack is 4 left handed clips and 4 right handed, so you can use the opposite on either side of the body.

This can be especially important on the front of modern Touring Car chassis where the body clip is controlling height of the body when the suspension is compressed.  Important for maximum downforce!

- Black colour.
- Strong holding strength to prevent easy removal in a crash.
- Sized for 1/10th vehicles.

The Yikong YK41012, an advanced RC crawler built upon its well-established LCG (Low Centre of Gravity) 1/10th chassis platform. This new model is engineered for extreme crawling stability and realism, making it ideal for intermediate to advanced RC enthusiasts.

Key Features
All-new ultra-low centre of gravity transmission design for improved crawling stability
Realistic metal portal axles for better ground clearance and scale appearance
25kg high-torque metal gear servo with realistic servo buffer protector to absorb shocks
Manual front and rear differential locking for versatile off-road performance
Remote-controlled two-speed transmission, switchable on-the-fly for both crawling and trail driving
Full ball bearing system throughout the vehicle for smoother operation
All-metal drivetrain, including gears and steering links, for maximum durability

Basic Information
Body Color: Blue or Grey
Motor: 32T brushed motor
ESC: Independent 60A brushed ESC, also supports 3S LiPo
Transmitter: Comes with a 6-channel transmitter

Required to Run

- 2-3S LiPo with XT60 Connector
- Charger
- 4 x AA Batteries for Transmitter