Sanwa

Receiver as supplied with the MX-6.
Model: RX-391W
Frequency: 2.4GHz FHSS-E
Input Voltage: 4.8v ~ 7.4v
Weight: 12.4g
Dimensions: 24.0 x 37.0 x 18.2 mm
Fail Safe Support: Yes - Throttle

Introducing the SANWA Gemini Sport Radio Set with RX391W receiver.

The Gemini Sport is based upon the popular MX-6 FH-E system and is supplied with 1 x RX-391W waterproof receiver.

Specification (From MX-6)

- Display Model Name on LCD
- Dual Rate(D/R)
- End Point Adjustment(EPA)
- Exponential(EXP)
- Anti Lock Brake(ALB)
- Trim(TRM)
- Model Memory [10 Model](MODEL)
- Sub-Trim(SUB-T)
- Reverse (REV)
- Model Name (NAME)
- Voltage Monitor (BATT)
- Supplied with RX-391W Waterproof Receiver
- Supplied with 4 x AA Battery box (Requires batteries)

Recommended LiPo battery IP455085-2S - Intellect Tx Lipo 2300mAh 1C 2S MX11

ADJUSTABLE LENGTH WITH STEEL CHROME CLIP

The all new SANWA MX-6 Radio is a fantastic 2.4GHz entry level transmitter and receiver set with the usual amazing SANWA quality.

*3 CHANNEL RADIO SYSTEM*

Supplied with RX-391W Waterproof receiver. 

The MX-6 has the basic functions you need like 10 model memory, dual rate, end point adjustment, sub trim and much more.

Compact, lightweight body.
New Transmission System "FH-E"

MX-6 Main Functions

- Display Model Name on LCD
- Dual Rate(D/R)
- End Point Adjustment(EPA)
- Exponential(EXP)
- Anti Lock Brake(ALB)
- Trim(TRM)
- Model Memory [10 Model](MODEL)
- Sub-Trim(SUB-T)
- Reverse(REV)
- Model Name(NAME)
- Voltage Monitor (BATT)
- Supplied with RX-391W Waterproof Receiver
- Supplied with 4 x AA Battery box (Requires batteries)

Used - with box and new receiver.

 

Introducing the SANWA Gemini Sport Radio Set with RX391W receiver.

The Gemini Sport is based upon the popular MX-6 FH-E system and is supplied with 1 x RX-391W waterproof receiver.

Specification (From MX-6)

- Display Model Name on LCD
- Dual Rate(D/R)
- End Point Adjustment(EPA)
- Exponential(EXP)
- Anti Lock Brake(ALB)
- Trim(TRM)
- Model Memory [10 Model](MODEL)
- Sub-Trim(SUB-T)
- Reverse (REV)
- Model Name (NAME)
- Voltage Monitor (BATT)
- Supplied with RX-391W Waterproof Receiver
- Supplied with 4 x AA Battery box (Requires batteries)

Recommended LiPo battery IP455085-2S - Intellect Tx Lipo 2300mAh 1C 2S MX11

* Picture may now be of actual product.

- Telemetry
- 2.4GHz FHSS4 Spread spectrum system 4ch
- Sanwa Super Response (SSR) support
- sensors is not included

Frequency - 2.4GHz FHSS4
Channel - 4ch
Nominal Input Voltage - 4.8~7.4V
Dimensions - 4.8-7.4V
Weight - 9.6g
Compatible radio - MT-4

Notice
Dimensions on product specification only shows the size of receiver itself and it excludes length of the antenna and crystal projection.
To maintain the reception of device, please do not cut the antenna. For additional information, please read official manual for each product.

The all new SANWA MX-6 Radio is a fantastic 2.4GHz entry level transmitter and receiver set with the usual amazing SANWA quality.

Supplied with RX-391W Waterproof receiver. 

The MX-6 has the basic functions you need like 10 model memory, dual rate, end point adjustment, sub trim and much more.

Compact, leightweight body.
New Transmission System "FH-E"

MX-6 Main Functions

- Display Model Name on LCD
- Dual Rate(D/R)
- End Point Adjustment(EPA)
- Exponential(EXP)
- Anti Lock Brake(ALB)
- Trim(TRM)
- Model Memory [10 Model](MODEL)
- Sub-Trim(SUB-T)
- Reverse(REV)
- Model Name(NAME)
- Voltage Monitor (BATT)
- Supplied with RX-391W Waterproof Receiver
- Supplied with 4 x AA Battery box (Requires batteries)

 

Compatible Response Mode with SUR, SSR, SHR, NOR
SSL CODE5/CODE10 Function
Quick Setup Wizard
Fully Adjustable Trigger
Adjustable Steering and Throttle Tension
INDICATOR FUNCTION can show Receiver Signal Strength and Packet Delivery Ratio
Weight: 382 g
Power source: AAA Battery x 3
ONLY Compatible RF with FH5
Includes new RX-493i receiver

One of the outstanding features of MT-5 is the indicator function which can check signal receiving conditions using RX-493i.
The conditions can be used for checking the device and correct receiver placement.

SANWA grip tape is used to give you a comfortable grip on your wheels radio.  Also absorbs sweat and prevents the radio slipping during a run.

This V2 version replaces the old SA107A90311A grip tape. 

Cool looking Aluminium carry handle for the SANWA EXZES ZIII stick transmitter.

Hold your expensive radio more securely, look good! 

FH5U: SXR(SANWA XTREME RESPONSE) MODE-COMPATIBLE
- SSL-COMPATIBLE PROGRAMMABLE SERVO
# Compatible with CODE 10 (M12S, EXZES ZZ, MT-44)
Not Compatible with CODE 5 (M12, EXZES Z, MT-4S, MT-4, MT-S)
- PGS SETTING GEAR-COMPATIBLE
- SUPER RESPONSE (SSR) MODE-COMPATIBLE
- HIGH RESPONSE (SHR) MODE-COMPATIBLE
- Li-Po 2 CELL-COMPATIBLE
- HIGH TORQUE TYPE
- BRUSH LESS MOTOR
- FULL ALUMINUM CASE
- FULL METAL GEAR (Strengthening Gears)
- AL HEAT SINK
- Black Harness

Programmable Servo to be compatible with SSL & Telemetry at Launch
- Setting Adjustment by wireless from Radio
- Setting Adjustment to connect Servo with Setting Gear
- Regarding Temperature, Current, Voltage and Volume Position on Servo inside,
Telemetry-transmission can be passed to Radio.
# Initial Setting on Setting Gear is necessary.

- Setting Items
- SSL-CH (SSL Channel Setting) -STRETC (Stretcher Adjustment) -BOOST (BOOST Adjustment)
- D-Band (Dead Band Adjustment) -MV-MID (Middle Torque Adjustment)
- MV-END (Later Torque Adjustment) -BREAK (Break Adjustment)
?MV-HOLD (Power Adjustment at whole area) ?MV-FRQ (Feeling Adjustment at whole area)
?MAX-PW (MAX Duty Adjustment)
? Setting Gear is necessary for ?setting.

Speed
0.09 sec/60 (7.4V)
0.11 sec/60 (6.0V)

Torque
17.3 kg/cm (7.4V)
14.0 kg/cm (6.0V)

Dimensions
40.5x20.5x38.7 mm

Weight
72 g

FH5U: SXR(SANWA XTREME RESPONSE) MODE-COMPATIBLE
- SSL-COMPATIBLE PROGRAMMABLE SERVO
# Compatible with CODE 10 (M12S, EXZES ZZ, MT-44)
Not Compatible with CODE 5 (M12, EXZES Z, MT-4S, MT-4, MT-S)
- PGS SETTING GEAR-COMPATIBLE
- SUPER RESPONSE (SSR) MODE-COMPATIBLE
- HIGH RESPONSE (SHR) MODE-COMPATIBLE
- Li-Po 2 CELL-COMPATIBLE
- HIGH TORQUE TYPE
- BRUSH LESS MOTOR
- FULL ALUMINUM CASE
- FULL METAL GEAR (Strengthening Gears)
- AL HEAT SINK
- Black Harness

Programmable Servo to be compatible with SSL & Telemetry at Launch
- Setting Adjustment by wireless from Radio
- Setting Adjustment to connect Servo with Setting Gear
- Regarding Temperature, Current, Voltage and Volume Position on Servo inside,
Telemetry-transmission can be passed to Radio.
# Initial Setting on Setting Gear is necessary.

- Setting Items
- SSL-CH (SSL Channel Setting) - STRETC (Stretcher Adjustment) - BOOST (BOOST Adjustment)
- D-Band (Dead Band Adjustment) - MV-MID (Middle Torque Adjustment)
- MV-END (Later Torque Adjustment) - BREAK (Break Adjustment)
?MV-HOLD (Power Adjustment at whole area) ?MV-FRQ (Feeling Adjustment at whole area)
?MAX-PW (MAX Duty Adjustment)
? Setting Gear is necessary for ?setting.

Speed
0.11 sec/60 (7.4V)
0.14 sec/60 (6.0V)

Torque
21.1 kg/cm (7.0V)
17.9 kg/cm (6.0V)

Dimensions
40.5x20.5x38.7 mm

Weight
72 g

FH5U: SXR(SANWA XTREME RESPONSE) MODE-COMPATIBLE
- SSL-COMPATIBLE PROGRAMMABLE SERVO
# Compatible with CODE 10 (M12S, EXZES ZZ, MT-44)
Not Compatible with CODE 5 (M12, EXZES Z, MT-4S, MT-4, MT-S)
- PGS SETTING GEAR-COMPATIBLE
- SUPER RESPONSE (SSR) MODE-COMPATIBLE
- HIGH RESPONSE (SHR) MODE-COMPATIBLE
- Li-Po 2 CELL-COMPATIBLE
- LOW PROFILED
- HIGH SPEED TYPE
- BRUSH LESS MOTOR
- FULL ALUMINUM CASE
- FULL METAL GEAR (Strengthening Gears)
- AL HEAT SINK
- Black Harness

Programmable Servo to be compatible with SSL & Telemetry at Launch
- Setting Adjustment by wireless from Radio
- Setting Adjustment to connect Servo with Setting Gear
- Regarding Temperature, Current, Voltage and Volume Position on Servo inside,
Telemetry-transmission can be passed to Radio.
# Initial Setting on Setting Gear is necessary.

- Setting Items
- SSL-CH (SSL Channel Setting) - STRETC (Stretcher Adjustment) - BOOST (BOOST Adjustment)
- D-Band (Dead Band Adjustment) - MV-MID (Middle Torque Adjustment)
- MV-END (Later Torque Adjustment) - BREAK (Break Adjustment)
?MV-HOLD (Power Adjustment at whole area) ?MV-FRQ (Feeling Adjustment at whole area)
?MAX-PW (MAX Duty Adjustment)
? Setting Gear is necessary for ?setting.

Speed
0.09 sec/60 (7.4V)
0.11 sec/60 (6.0V)

Torque
15.6 kg/cm (7.4V)
12.8 kg/cm (6.0V)

Dimensions
40.2 x 20.5 x 26.0 mm

Weight
53.0 g

Replacement case for SANWA RX-493 receiver.

For the SANWA M17, MT-5 and MT-R transmitters is this budget friendly receiver.

Specifications

Compatible with FH5/FH5U (M17/MT-5/MT-R)
Compatible with SXR Response Mode
Compatible with SSL Function
Voltage: 4.8 - 7.4 V
Water Proof (as IPX4)
Antenna pipe
COAXIAL ANTENNA with Antenna Pipe
*MT-5 indicator function is not compatible

SANWA RX-492i compact receiver with built in antenna and indicator function. (i)

Features.
- Compact receiver
- Waterproof
- Plug in Bind
- Built in Antenna
- Suitable for 1/10 and 1/12 Electric Car

- 2.4 GHz FHSS5 Spread Spectrum System 4ch
-Compatible with Telemetry
*Cannot connect RPM sensor and Temperature sensor To measure RPM and Temperature is only combine with SUPER VORTEX series
- Compatible with SSL (SUPER VORTEX Series, etc...)
- Ultra Response Mode (SUR)
- Extreme Response Mode (SXR)
*SXR response mode is only compatible with
　transmitter M17.
- Dual ID system (able to bind with 2 transmitters)
- The smallest and lightest receiver in the class

*RX-492i can be used with FH5 transmitters that do not have indicator function.
*RX-492i is not different with RX-492 except installing indicator function.
*Indicator function can be used with transmitters are compatible with indicator function.

Indicator Function compatible
Indicator function can be check signal strength when connected to transmitter.
The indicator function can be used for finding problems as incorrect receiver placing and finding the best receiver position for transmitter.
SANWA technical development dictates that, when indicator function is checked signal strength does not effect response.

Specification

Compatible with FH5/FH5U
Voltage: 3.7 - 7.4V
Size: 18.5 x 20.2 x 27.4 mm
Weight: 6.8 g
Water Proof (Same as IPX4 )
Indicator Function Compatible
Compatible radio - M17, MT-5, MT-R

SANWA RX-493i receiver for MT-5 transmitter.

Compatible with FH5/FH5U
Size: 26.0 x 23.2 x 14.0 mm
Weight: 6.2 g
Waterproof (Same as IPX4)
Compatible receiver with INDICATOR FUNCTION.

Introducing the new and updated SANWA M17S 2.4ghz wheel radio.

The M17S has the following new features;

New World Fastest Response !!

Installed 16 bit Analog-to-digital converter and software gives a smoother feeling.

Internal electric devices renewed increases speed of interface.

"FH5U" could be twice as amount of transferred data as FH5. This gives more smoother operation and more faster response to be compatible with SXR mode.

M17S records new world fastest response.

Features

■Installed 16 bit Analog-to-digital converter and
updated software gives more smoother feeling. Also, internal electric devices renewed increase speed of interface.
■Indicator function installed
■Direct model select function renewed
■ Quick Set Up Wizard replaced to inside model menu
■ Changeable menu color
■ Improve TELEMETRY LOG remain time display
■ Improve MULTI SETTING GEAR function menu placement
■ Compatible with FH5/FH5U System
■ LP1-2500 battery chargable by USB Type-C
■ Feeling Function can be set 25 segmentation
　(M17 can be set from 7 segmentation)
■ Improve Timer function
■ Improve R-Mode Function
■ Improve Down
■ The world first function “MOTION STEERING” can operate steering by tilting M17S.

System Features

●Dull-dot Color LCD(480ｘ320) ●Switchable driving position(Left/Right) ●Touch Pad ●Built-in Antenna ●ST,TH Adjuster ●Detachable Fully Adjustable Throttle Unit ●Feeling ●Safety Link●Racing Mode ●Setup Wizard ●Dual Rate ●End Pint Adjust ●Anti-Lock Brake ●Servo Speed ●Offset ●Trim/Sub Trim ●Servo Reverse ●Curve ●Fail Safe ●Timer ●Lap ●CODE AUX ●Model Memory ●Model Name ●Model (Select/Copy/Clear/Sort) ●Direct Model Select ●RF Mode (FH5U,FH5) ●Response Mode (SUR/SSR/SHR/NOR) ●Bind ●Log(REC/RPM/VOLT/TLM1/TLM2/ST Point/TH Point/RX Mode/Reading Function) ●Servo Monitor ●Key Assign ●Vibrator ●AUX Type ●Trim Type ●TH Type ●Calibration ●Custom Menu ●Mechanical Rudder Angle Adjustment ●Large Steering Wheel included ●Large/Small Grip Pad included ●Compatible RX: Telemetry-compatible(RX-493i, RX-492i , RX-49T, RX-493, RX-492,RX-491)

【Accessory】
●Grip Pad (Large/Small) ●Large Steering Wheel ●Strap Hook ●Steering Slant Parts (Right Hand/Left Hand) ●Trigger Angle Spacer ●Brake Trigger(+1/+2) ●Spring for ST and TH (Hard, Medium, Soft, Super Soft) ●Dial Cover for Lefty