1/14 Euro Truck Charge Leads, Battery Adaptors, Plugs +

SOLDERING REQUIRED

From MonkeyKingRC is this extremely handy Balance Charge Adapter Board.

Plug into the output of your charger using either the XT60 or 4mm bullet connectors and charge a wide variety of batteries with different connector types.

It has the ability to charge XT90, XT60, XT30, T plug and JST in 2S, 3S, 4S, 5S and 6S.

Extremely simple, but great to have at hand in any workshop or pit box.

To allow charging of Tamiya Batteries (Tamiya Plugged Batteries) from a Sky Rc Charger.

This Charge Wire has a length of 50cm and comes with XT60 charger connection to BEC battery connector.

Due to the 50cm Silicon-Flex cables and the high-end XT60 connector, this charging lead is perfectly suited for its application.

For protection and reliable operation, the charge wires come with a protection mesh and shrink tube on both sides with our logo imprinted.

For use on 4mm bullet connector batteries to typical female Tamiya plug

• 4mm male plug to Tamiya plug 90° angle
• Included in the LRP LiPo Power/Hyper Packs with Multi Plug System
• Length 100mm

Converter for using XT60 batteries in a tamiya plug power system or charging cable.

Feature:

• For: ESC/Battery
• Material: Plastic
• Color: Yellow

Include:

• XT60 Male To Tamiya Female Connector Adapter (1 pc)

Adapter cable for you to connect to your ESC or charger to convert from Straight plugs to T-Plug.

Feature:

• For: ESC/Charger
• Material: Plastic
• Color: Red

Include:

• 4mm Plug w/ T-Plug Connector Wire (1 pc)

Pre-soldered charging cable for charging all sorts of 2s batteries with the included balance port connector. This version comes with a T plug for you to plug into your charger.

Features:

• For: Charger
• Material: Metal/Plastic
• Color: Black/Gold

Include:

• Right Angle Type 4 or 5mm Plug Balance Charge Cable w/ T Plug (1 pc)
• 4mm Plugs (2 pcs)
• 5mm Plugs (2 pcs)

These conversion plugs allow the use of 4mm bullet connectors in batteries which have 5mm bullet connectors. After installing these conversion, the battery terminals will stick out and increase risk of short circuit.

Feature:

• For: 5mm Plug Battery

• Material: Brass

• Color: Gold

Include:

• Conversion Plugs (4 pcs)

Pre-soldered charging cable for charging all sorts of 2s batteries with the included balance port connector. This version comes with a XT60 for you to plug into your charger.

4MM BATTERY BULLETS AND 2MM BULLET FOR BALANCING

Feature:

• For: Charger

• Material: Metal/Plastic

• Color: Black/Red/Gold

• XT60 PLUG FOR ALL SKY RC CHARGERS

Include:

• Charge Cable (1 pc)

For anyone looking to finish off a neat electronics installation these low profile plugs with grips set things off. The plugs feature a recess area that makes soldering 11-16gaugae wire easy; whilst the colour grip allows for easy identification of polarity and something to grip onto whilst pulling the connector from the terminal (rather than tugging on the wire to unplug from your battery). Finished off with a RC Overhaul logo lasered on top they are not only stylish but functional accessory for anyone looking to overhaul their wiring.

These fit all batteries with a 4mm bullet terminal.

Use a few drops of CA glue to install the grip once the wire has been soldered to the plug.

Awesome plug covers that help with the removal of your battery plugs. Plus, assist you in plugging in the correct polarity.

Super bling look!

Female plugs - Female found fitted to Batteries to then be able to plug into Male XT60 Plugged Chargers and ESC's.

These connectors are made from high-temp yellow nylon with gold-plated spring pins or sockets moulded in. The shape of the XT60 prevents reverse polarity, and when plugged in the connection is super-solid. Perfect for applications up to 60A continuous current draw.

4 Female plugs.

Male plugs - found Fitted to SKY RC Chargers & ESC's. 

These connectors are made from high-temp yellow nylon with gold-plated spring pins or sockets moulded in. The shape of the XT60 prevents reverse polarity, and when plugged in the connection is super-solid. Perfect for applications up to 60A continuous current draw.

These versions use sheath housing, no need to use heat shrink tube, enhances overall performance in handling and durability.

4 Male plugs.

This 2S Charge Wire for Competition Batteries has a length of 60cm and comes with XT60, XH charger connection to 4/5mm, 2mm battery connectors.

Due to the 60cm Silicon-Flex cables and the high-end 4mm/5mm gold connectors, this charging lead is perfectly suited for its application.

For protection and reliable operation, the charge wires come with a protection mesh and shrink tube on both sides with our logo imprinted.

This Charge Wire solves the common problem, that the balancer wire is coming off unnoticed under the shrink tube at 4/5mm plug, undetectable for the user, making him believe that the battery or charger is broken!
Our Solution: Balancing wires in a protected area - No balancing wire at the 4/5mm plug – No wire can come off!

Enjoy a nicely organised pit table/working bench with our short charging lead!

This 2S Charge Wire for Competition Batteries has a length of 35cm and comes with XT60, XH charger connection to 4/5mm, 2mm battery connectors.

Due to the 35cm Silicon-Flex cables and the high-end 4mm/5mm gold connectors, this charging lead is perfectly suited for its application.

For protection and reliable operation, the charge wires come with a protection mesh and shrink tube on both sides with our logo imprinted.

This Charge Wire solves the common problem, that the balancer wire is coming off unnoticed under the shrink tube at 4/5mm plug, undetectable for the user, making him believe that the battery or charger is broken!
Our Solution: Balancing wires in a protected area - No balancing wire at the 4/5mm plug – No wire can come off!

Core RC 2S Balance charge extension lead.

Fitted on all SKY RC Chargers and ESC's.

These connectors are made from high-temp stealthy Black nylon with gold-plated spring pins or sockets moulded in. The shape of the XT60 prevents reverse polarity, and when plugged in the connection is super-solid. Perfect for applications up to 60A continuous current draw.

These versions use sheath housing, no need to use heat shrink tube, enhances overall performance in handling and durability.

4 Male plugs.

The popular T style plug and socket with the addition of clip-on insulating caps from Amass. These caps replace the need for heatshrink tubing and provide extra grip.  As with the original connector, this new plug is made from nylon, making them very tough and difficult to melt when soldering. They have sprung steel blades to prevent the terminals coming apart accidentally and gold plated terminals for a good connection.

Backwards compatible with original T connectors so you can use them straight away.

It is recommended to always select the female deans plug for a battery terminal, to reduce the chance of short-circuits.

2s Lipo charge lead with XT60 input plug, 4-5mm battery plugs, including 2mm balance plug.

Range of 8 Connectors to fit various chargers with 4mm Output Sockets.

Plug types include:

• T-Deans; 4mm Plug
• 3 various servo plugs
• Tamiya style and 3 other.
• Can be used with all makes of charger fitted with 4mm output sockets.

CORE RC - DEANS (MALE - BATTERY SIDE ) TO (FEMALE - ESC SIDE) TAMIYA LEAD CR745

TYPICALLY TO PLUG:

-FROM AN ESC FITTING WITH (MALE TAMIYA) > TO CONNECT AND ADAPT TO A BATTERY FITTED WITH A FEMALE (DEANS T PLUG).

For use on 4mm bullet connector batteries to typical female deans T plug.

TO USE ON all SKY RC CHARGERS - TO CONVERT TO MALE DEANS PLUG TO CHARGE BATTERY FITTED WITH FEMALE DEANS (ALWAYS USE FEMALE DEANS ON BATTERYS TO PREVENT ANY SHORT).