1/12 Mini GT - 1S Brushed Electrics

EP Batteries have a great reputation for providing high quality batteries which are safe and reliable, these 4.8v 4 cell packs are no different!

Specially designed for banger racing or other types of 1/12th oval cars this 4 cell NiMH pack is available with 4600 mAh. 

4.8v NiMH Stick pack, 4600mAh
Supplied with quality flexible silicone wire a T type connector.
94x47.5x24.5mm
291g

Our current Competition Car Line batteries are very popular amongst racers and are used around the world in many competition classes with great success. At the same time, they have gained a high level of acceptance and appreciation amongst the scene's best drivers LRP batteries were the most used brand and at the IFMAR TC World Championship and got World Champion in the hands of Ronald Volker. With the new 2018 generation, battery technology gets a further boost. With Graphene-2 cells, we introduce the next step in Graphene development, resulting in more power and optimized weight!Graphene-2 lowers the internal resistance which leads to less heat build-up under load. This guarantees maximum performance over the complete duration of a race. The P4 1/12 Ultra LCG Stock Spec GRAPHENE-2 6200mAh Hardcase battery - 3.7V LiPo - 120C/60C stands out with:

• MAXIMUM POWER
• LOW WEIGHT
• STANDARD 1/12 SIZE
• 4MM CONNECTOR

BRCA/EFRA Approved

Length - 93.00mm

Width - 47.00mm

Height - 18.5mm

Weight - 150g

C-Rate - 120C/60C

4mm Plug

3C Charge Rate

22.94Wh

A must for every pit box! (Battery not included)

Designed to check the voltage of your packs quickly and easily to see what state of charge they are in.

The checker has a DC Voltage range - 2.5v - 30v so good for 1S-4S racing packs and higher.

Red digital display, with neat, cool looking black wires to look great on your pit bench.

Reverse connection protected, in case of cross connection it wont be damaged.

Neatly built with 4/5mm bullet stepped plugs for most common racing battery types.

Or use 2S (7.4v) 8.4V ESC, remove voltage protection, then use 1S (3.2v) 4.2V lipo instead via this module, still giving 6v to the receiver. Or in applications where the ESC has no 6V BEC output. 

1S DC-DC BOOSTERs, DC-DC power booster modules which can draw power from the 1S LiPo battery then boost it to the voltage level (6V) suits the receiver & servo and provide the continuous output current up to 3A, are mainly applied in 1/12 RC vehicles. Nowaday 1/12 cars usually use 1S LiPo batteries, and BECs in ordinary ESCs are step-down. In that case, the BEC output voltage will be lower than 4.2 V that cannot meet the power demand of the receiver & servo. Therefore, 1/12 cars have to run with purpose-built 1S ESCs installed in or external receiver batteries connected if speed controllers are common. No other solutions. However, things will be different after adopted this booster. Then the receiver battery can be abandoned and users can be free from charging and maintaining batteries.

Introducing the Hobbywing 1/12th Brushed Speed Control for 1S LiPo or 4 Cell NiMh.

Note: To turn on and off, you must remove battery plug. Button is for ESC Programming only. ESC comes set as standard with no brakes. You must turn on brakes and changed from Zero brake force to min of 25% for them to work. Standard setup is for Banger cars for instant reverse.

A collaboration between Schumacher Racing and Hobbywing !

Easy Operation
This ESC is specially designed to be easy to use, it not only carries forward the outstanding quality of HOBBYWING products but is simple in operation.

High Reliability & Durability
Reliable hardware combined with advanced software technology allows the 1060 WP 1S Brushed to not only provide high power output but also overload protection of the ESC circuit.

Easy to Use
This ESC features auto throttle calibration and further settings can be adjusted using the LED Program Box HW30501003.

Wide Application
This ESC is designed for 1/12th Scale cars using 1S LiPo batteries or 4 Cell NiMH.

Applicable to All Weather Conditions
The waterproof and dust-proof design allows the 1060 WP Brushed to be used in all weather conditions without any issue of damage caused to the ESC from water or dust.

See image for factory default settings.

Instant reverse is a standard setting, highly suitable for 1/12th Stock Car class.

Specifications

Current Rating - 60A
Input Voltage - 1S LiPo or 4 Cell NiMh
Motor - Brushed Motors： ≥15T
Applications - 1/12th Racing
BEC Output - 6V，3A
Parameter Setting Method - LED Program Box HW30501003
Connectors - T Plug & 4mm Bullets.

From CORE RC are these Lockdown Heatsink Bullet Plug Grips.

A tight and reliable connection between your LiPo and speed control eliminates any losses of power, increased resistance, arcing and general poor electronic set up.

Giving a reliable connection with an easy twist of the attractive looking locking screw.

Easy to identify Red +ve and Black -ve plugs helps prevent cross connection and that moment every racer dreads, the magic smoke escaping from your speed control !

4/5mm Size.

Introducing the MC3 range of Intellect Competition LiPo's for 2024.

Once again Intellect brings us great power, a great new look and as always excellent value for money. 2024 brings a 1.5% improved production yield rate, meaning better products in the hands of the racers.

A large range of batteries for all applications, Stock and Modified with a low Centre of Gravity and a great choice to give you a perfect balance in any class.

2S BRCA/EFRA legal as of April 1st 2024. 1S From January 2024.

Specifications

Dimensions - Height & Length & Weight

18.5mm x 93mm x 47mm
8800mAh
120C
3.8v
4mm connector
152g
33.44Wh

High Voltage Cells

(bullets shown may differ from illustration)

VOLTZ 4600MAH 4.8V NIMH STICK PACK WITH DEANS CONNECTOR

Specifications

• Capacity : 4600mAh
• Voltage : 4.8V
• Dimensions : 92mm x 45mm x 24mm

Perfect option to power the Mardave Mini & Bangers 

• Standard 540 can size for use in 1/10th scale or 1/12th scale vehicles.
  - Motors are designed for use with 4 cell or 6 cell Nimh packs, or 1s or 2s lipo packs.
  - Supplied with leads for easy connection in RTR cars.
  - Includes internal cooling fan.
• ALLOWED IN SOME TT01E EURO TRUCK CLASSES AS REPLACEMENT FOR TORQUE TUNED TAMIYA MOTOR
  - 21 Turns especially designed for F2 Stock Cars and Bangers etc
  - Approved by the BRCA for F2 Stock Cars.

VOLTZ 5300MAH 4.8V NIMH STICK PACK WITH DEANS CONNECTOR

Specifications

• Capacity : 5300mAh
• Voltage : 4.8V
• Dimensions : 92mm x 45mm x 24mm

Perfect option to power the Mardave Mini & Bangers 

EP Batteries have a great reputation for providing high quality batteries which are safe and reliable, these 4.8v 4 cell packs are no different!

Specially designed for banger racing or other types of 1/12th oval cars this 4 cell NiMH pack is available with 3600 mAh. Supplied with quality flexible silicone wire a T type connector.

Perfect option to power the Mardave Mini & Bangers 

93.5x46x24mm
255g