Team Associated

Specification

TEAM ASSOCIATED RC10 ULTRA FOX KIT

Vintage Soul. Modern Strength.

The RC10 Ultra Fox isn’t just a tribute; it’s a high-performance celebration of engineering that defined a decade.

Combining the iconic aesthetics of the 1980s with modern Team Associated precision, the RC10 Ultra Fox is built for those who remember the thrill of the first dirt jump and those ready to experience it for the first time.

Iconic Mono-Shock Front End:

At the heart of the RC10 Ultra Fox is the legendary front mono-shock suspension. This unique design captures the authentic look and feel of the era’s most innovative race cars and provides a nostalgic driving experience.

Signature Gold Aluminum Shocks:

It wouldn’t be a classic without the bling. Our race-proven, oil-filled gold anodized shocks offer buttery-smooth damping and that unmistakable “Team Associated” factory look.

Full Independent Suspension:

Don’t let the vintage vibes fool you. With fully independent front and rear suspension geometry, the RC10 Ultra Fox soaks up bumps and sticks the landings with the poise of a modern champion.

From the aggressive stance to the sleek, period-correct body lines, every inch of the Ultra Fox is designed to turn heads and stir up memories of backyard battles and local track glory.

Features

• New molded side guards.
• New molded side guards.
• New molded front bumper.
• New molded rear bulkhead system.
• New gold anodized front mono-shock system.
• New front mono-shock tower.
• 80’s Retro themed RC10 Classic.
• Black anodized nose plate and motor plate.
• Hardened rear driveshafts.
• Long travel, fluid-filled anodized aluminum rear coil-over shocks.
• Legendary 6 gear transmission.
• Exceptional ground clearance with low center of gravity.
• Classic front and rear tires with metallic gold 3-piece racing wheels.
• Clear Viper body with classic wing.
• Full metal ball bearings.
• Fits 6-cell NiMH and 2S LiPo battery packs.
• Independent rear suspension.
• Front anti-roll bar set.

Specifications

Power Source: Electric
Terrain: Off-Road
Body Style: Buggy
Scale Size: 1:10 Scale
Assembly Level: *Kit
Length: 381mm (15in)
Width: 226.8mm (8.93in)
Wheelbase: 267.7mm (10.54in)
Weight: Varies
Internal Gear Ratio: 2.25:1
Drive: 2WD

Please Note: This vehicle comes as a kit and must be fully assembled by the user.

Required To Complete

• Motor
• Servo
• Receiver
• Radio
• Battery
• Paint
• Assembly and painting required

The DC10 Classic - Where Going Sideways Becomes an Art Form!

Since 1964, Team Associated has proven to be the leader in the world of competition racing, and now born from our on-road racing legacy, we have engineered the DC10 Classic that sets new standards.

In the thrilling world of RC drifting, balance is everything, and the DC10 delivers precision like never before. With an arsenal of suspension and chassis tuning options at your fingertips, you can fine-tune your ride to perfection.

From camber and caster adjustments to kingpin inclination (KPI) and the exact placement of your motor, servo and battery. Whether you’re a seasoned drifter or just starting to explore the exhilarating world of RC drifting, the DC10 Classic Kit is your ticket to one of the fastest-growing categories in RC racing!

Features

• New 2mm gold anodized aluminum flex chassis Included.
• Classic white molded (dyeable) plastics throughout.
• Gold Anodized aluminum threaded shocks.
• Gold anodized motor plate.
• Adjustable battery placement.
• Fully tunable Ackermann plates.
• Easy-to-adjust camber.
• High and low motor mounting capabilities.
• Adjustable offset wheel hexes.
• Adjustable servo mount locations.
• Precision rubber-sealed ball bearings throughout.
• Rear mounted electronic speed control (ESC) plate.
• Adjustable rear anti-squat and toe-in.
• Competition, low friction Team Associated drift tires included.
• Maximum steering throw for optimal control drifting through turns.
• Easy-to-tune caster adjustments can be made without tools.
• White Team Associated Drift wheels included.
• New Silver adjustable turnbuckles.
• All new clear muscle car style body.

Specifications

Power Source: Electric
Terrain: Off-Road
Body Style: Other
Scale Size: 1:10 Scale
Assembly Level: Kit*
Width: Varies
Wheelbase: 259-332
Internal Gear Ratio: 2.6:1
Drive: 2WD

Please Note: *This vehicle comes as a kit and must be fully assembled by the user.

Unleash unparalleled performance with the RC10B84D, a 1/10-scale 4WD buggy engineered for precision, speed, and racetrack victories.

Designed with cutting-edge features, this competition machine delivers superior handling and control. Its molded height-adjustable gearboxes ensure optimised drivetrain efficiency.

The long-arm suspension geometry enhances grip and predictability, while the optimised steering bellcranks and rack provide exceptional bump steer control, keeping your lines tight at every corner.

Fine-tune your setup with chassis bracing adjustments, giving you the flexibility to adapt to each track you race on. The RC10B84D allows for precise weight distribution and chassis balance, letting you push the limits with confidence.

Enhanced aerodynamics come standard with a low-profile body and two rear wing mount heights. The RC10B84D is finished with shock tower covers, 3.5mm turnbuckles and ballcups, and 13mm big-bore shocks, providing the ultimate blend of strength, precision, and performance, the RC10B84D is your key to place top of the podium!

Features

• Molded Height-Adjustable Gearboxes Front and Rear with Additional +2 Rear Gearbox for High-Grip Conditions.
• Long-Arm Suspension Geometry: improves grip and predictability in all conditions.
• Optimised Steering Bellcranks and Rack: improved bumpsteer control at all ride heights.
• Chassis Bracing: Fine tune chassis flex characteristics with upper and lower chassis bracing front and rear.
• Standard and HRC (High Roll Center) Rear Hubs Included.
• Insert adjustable caster block with 0, +/-1, and +/-2 degree inserts included.
• Forward and Back Motor Positions: used for further weight bias adjustment.
• Highly Adjustable Battery Holder with Thumb Tabs: allows for easy battery removal and fine tuning of weight bias.
• 2.5mm Thick Tapered 7075-T6 Aluminum Chassis with 10 Degrees of Kickup and Improved Departure Angle.
• Molded Ring and Pinion Gears Included.
• Aluminium Center-Mounted Servo Mount.
• Two heights Included for Rear Wing Mount.
• 7-inch Rear Wing.
• Low-Profile Body.
• Shock Tower Covers Front and Rear.
• 3.5mm Turnbuckles and Ballcups.
• 13mm Big-Bore Shocks.

Specifications

Power Source: Electric
Terrain: Off-Road
Body Style: Buggy
Scale Size: 1:10 Scale
Assembly Level: Kit (This vehicle comes as a kit and must be fully assembled by the user.)
Length: 395mm (15.55in)
Width: Varies
Wheelbase: Varies
Weight: Varies
Internal Gear Ratio: 2.50:1
Drive: 4WD
Product Status: Active

Required To Complete

• Motor
• Pinion Gear
• ESC
• Servo
• Transmitter and Receiver
• Tyres
• Wheels
• Polycarbonate specific paint

Please Note: This vehicle comes as a kit and must be fully assembled by the user. Electronics and/or an engine/motor may be required.

Fits

• Element RC
• Enduro
• Enduro Gatekeeper Rock Crawler/Trail Truck
• Enduro Trail Truck
• Enduro Trail Truck, Knightrunner

Team Associated SC10 Body Mounts Front & Rear

Team Associated B44 Rear Chassis Plate

This Team Associated light-up display is the perfect companion piece to showcase your Associated cars.

Please Note: Lamp with USB-C cable included. (USB-C power adapter not included).

Specifications

Weight (g): 0.78g
Length: 15in
Width: 1.41in
Height: 5.47in

Celebrate Team Associated’s 60-year anniversary with this new apparel design. Featured on both a black t-shirt and pullover sweatshirt the new design was debuted by the team at the 2024 IFMAR World Championships that saw Davide Ongaro win Team Associated’s 33rd IFMAR World Championship. Made from a cotton/poly blend this apparel features a soft feel with durable construction.

Wear this heritage AE slot-car track logo design in high-quality poly/cotton blend shirt in blue.

Wear this heritage AE slot-car track logo design in high-quality poly/cotton blend shirt in blue.

Wear this heritage AE slot-car track logo design in high-quality poly/cotton blend shirt in blue.

Wear this heritage AE slot-car track logo design in high-quality poly/cotton blend shirt in blue.

Wear this heritage AE slot-car track logo design in high-quality poly/cotton blend shirt in blue.

Wear this heritage AE slot-car track logo design in high-quality poly/cotton blend shirt in blue.

Celebrate the 60th Anniversary of Associated Electrics and the 40th RC10 Anniversary with this commemorative decal sheet.

This colorful, branded 24" x 48" pit mat has a smooth and luxurious feel. This larger size provides a protective surface for countertops and RC pit tables alike. It's a great way to protect the countertops in your shop or home while creating a factory look. Easy to roll for convenient travel to and from the racetrack.

New from Associated Electrics are three 60" x 30" vinyl banners! Made from high-strength, fiber-reinforced vinyl and printed in bold, weather-resistant ink, these banners are the perfect addition to your track, garage, hobby room, etc. We have also lined the perimeter of the banner with eyelets for simple and easy mounting.