ASSOCIATED ELECTRICS Electric On-Road Cars

Fits

• RC10T 4WD

Increased Stability, Traction and Handling with the Mid-Motor DR10M

The mid-motor, 4-gear transmission in the all-new DR10M RC Drag Race car offers the advantage of using motor torque rotation to apply downward force to the rear tires. These forces generate additional rear end squat for that off-the-line acceleration which offers more tire-to-surface area contact, giving the DR10M additional rear traction.

The mid-motor set up up shifts the weight distribution forward, reducing front-end lift. Additionally, the motor and tires share the same rotational direction, which produces quicker forward momentum to help you get a faster time across that finish line.

The DR10M Drag Race Team Kit is based on the successful DR10 drag race platform. The DR10M Team Kit features a rear anti-roll bar, 28 precision ball bearings, fully adjustable suspension, vertical ball ends for roll center adjustments, 2.6:1 ratio gearbox with heavy-duty sealed gear differential, and externally adjustable V2 slipper clutch. The new Octalock spur gear and 11mm Octalock pads provide maximum consistency and higher torque capacity. Look for a No Prep RC Drag Racing event near you - all are welcome. With 132 feet of head-to-head action, you're sure to enjoy the day racing, running for fun, or just checking out the action.

Please Note: Not included in kit: motor, battery, ESC, servo, receiver, wheels, tires, body, radio, fan, and pinion gear. Assembly and painting required.

Features

• Mid-motor design creates improved traction and control in the vehicle's weight distribution
• Durable front and rear wide body mounts
• Rigid, 4mm thick carbon fiber rear shock tower
• Heavy-duty sealed silicone-filled gear differential
• Stiff rear anti-roll bar
• Full adjustable double-ladder wheelie bar
• Ball bearing wheelie bar wheels with rubber tires for increased straight-line stability
• Height adjustable rear gearbox provides the ability to adjust drive shaft angle
• All metal gear transmission with hardened steel top shaft
• Octalock spur gear and 11mm Octalock pads for maximum consistency and higher torque capacity
• 4-gear rear transmission configuration aids in controlling weight movement providing more traction under acceleration
• Rear CVA drive shafts for more reliability
• V2 12mm Big Bore threaded aluminum shocks
• Low center-of-gravity chassis with multiple battery and electronics mounting configurations
• Rigid twin deck chassis design
• Machined aluminum rear bulkheads
• Machined aluminum rear suspension mounts
• Rugged steel turnbuckles for adjustable camber and front toe-in
• Adjustable suspension geometry
• Vertical ball ends for roll center adjustments, front and rear
• Many Factory Team options already available
• 28 precision ball bearings
• Metric hardware throughout

Specifications

Power Source: Electric
Terrain: On-Road
Body Style: Other
Scale Size: 1:10 Scale
Assembly Level: Kit*
Length: varies
Width: 272mm (10.71in)
Wheelbase: 327mm (12.87in)
Weight: varies
Internal Gear Ratio: 2.6:1
Drive: 2WD

* This vehicle comes as a kit and must be fully assembled by the user. Electronics and/or an engine/motor may be required.

Required To Complete

• 1:10 scale electric motor
• Electronic speed control (AS27015)
• 2S LiPo battery
• Battery charger
• 2-channel surface transmitter
• 2-channel receiver
• Steering servo
• Body and paint
• 1:10 scale 2.2" front tires and wheels
• 1:10 scale 2.2" or 3.0" rear tires and wheels
• Pinion gear
• Other helpful items: Silicone Shock Fluid, Silicone Diff Fluid, Body Scissors, Reamer or Hole Punch, FT Wrench Set, Hobby Knife, Needle Nose Pliers, Wire Cutters, Soldering Iron, Calipers or a Precision Ruler

Rat Rods, Street Rods and Hot Rods

A culture of enthusiasts that modify their older coupes' weight for reduction, improve vehicle aerodynamics, and tune their engines to produce more power. Becoming popular after World War II, these heavy, older cars underwent drastic surgery to chop their tops, lower and slope their windshields backward, and compete in speed contests.

The passion for these rods still lives today and Team Associated pays tribute to the genre with the Pro2 RT10SW rat rod, which is based on the 9-time ROAR Short Course National Championship-winning trucks, featuring a water-resistant high-power Reedy brushless speed control and 3300kV brushless motor, a 2.4GHz 2-channel radio system as well as our DVC (Dynamic Vehicle Control) receiver unit with built-in adjustable digital gyro. Add to that a Reedy metal-gear digital high-torque servo and a water-resistant enclosed receiver box--all of this packaged together in an outstanding factory-finished body. The RT10SW beast will keep you cornering with the included high-grip all-terrain tires and lightweight wheels.

Pro2 RT10SW

Team Associated's Pro2 RT10SW is a highly detailed and fun-to-drive Ready-to-Run RC Rat Rod. Based on our championship-winning short course truck, the Pro2 RT10SW features some of the latest features in racing. A durable, lightweight aluminum top shaft, rugged steel turnbuckles, and adjustable suspension geometry give the Pro2 RT10SW the ultimate in handling on all terrain!

Please Note: This vehicle needs extra parts to make it operational such as batteries and charger.

Features

• 2.6:1 ratio gearbox with heavy-duty sealed gear differential and externally adjustable slipper clutch
• Durable and lightweight aluminum top shaft
• Low center-of-gravity molded composite chassis with hook-and-loop battery straps that accommodate both NiMH and 2S or 3S LiPo battery packs
• Impact-absorbing front and rear bumpers
• Adjustable body mounts
• Rear CVA drive shafts for more reliability
• Aluminum 12mm big bore coil-over shock absorbers
• Rugged steel turnbuckles for adjustable camber and front toe-in
• Adjustable suspension geometry
• Vertical ball ends for roll center adjustments, front and rear
• Metric hardware throughout
• 22 precision rubber-sealed ball bearings

Specifications

Power Source: Electric
Terrain: On-Road
Body Style: Other
Scale Size: 1:10 Scale
Assembly Level: Ready-To-Run*
Length: 492.4mm (19.39in)
Width: 252mm (9.92in)
Wheelbase: 277.8mm (10.94in)
Weight: varies
Internal Gear Ratio: 2.6:1
Drive: 2WD

* This vehicle is fully assembled and ready to run but does require a battery and/or charger.

Required To Complete

• Four AA batteries for radio-controlled car radio
• Suitable NiMh or 2S or 3S LiPo RC car battery
• Radio control battery charger

Team Associated's Pro2 SC10 Method Race Wheels is a Ready-To-Run RC electric truck based on the 10-time R.O.A.R. winning Short Course National Champion. The Pro2 SC10 includes a water-resistant, high-power Reedy brushless speed control, Reedy 3300kV brushless motor, and a water-resistant, enclosed receiver box. The suspension includes adjustable blue anodized aluminum V2 12mm big bore coil-over shocks. The gearbox comes with a heavy-duty sealed-gear differential and the externally adjustable V2 slipper clutch. CVA driveshafts are included. The short course hex-drive wheels come standard on the Pro2 SC10 with realistic off-road wheels and tires to keep the truck gripping the ground.

Method Race Wheels designs, develops, and distributes high-performance wheels and accessories for race and street applications. Racing enthusiasts and participants...always driven to look beyond conventional ideas of industry standards. Engineering, rigorous testing, data collection and proven performance defines Method Race Wheels...Lighter. Stronger. Faster.

Features

• 2-channel 2.4GHz radio with a DVC (Dynamic Vehicle Control) receiver featuring a built-in adjustable gyro
• High-torque, metal-gear Reedy servo with spring-style servo saver
• Powerful Reedy 3300kV brushless motor
• Water-resistant, high-power Reedy brushless speed control with T-plug connector and LiPo low-voltage cutoff
• Factory-finished short-course body with Method Race Wheels livery
• Water-resistant enclosed receiver box
• Durable and lightweight aluminum top shaft
• Low center-of-gravity molded composite chassis with hook-and-loop battery straps that accommodate both NiMH and 2-3s LiPo battery packs
• Durable front and rear body mounts
• Rear CVA drive shafts for more reliability
• Aluminum 12mm big-bore, coil-over shock absorbers
• 2.6:1 ratio gearbox with heavy-duty sealed gear differential and externally adjustable V2 slipper clutch
• Rugged steel turnbuckles for adjustable camber and front toe-in
• Fully adjustable suspension geometry
• Vertical ball ends for roll center adjustments, front and rear
• Metric hardware throughout
• 14 precision rubber-sealed ball bearings
• Many Factory Team options already available!

Specifications

Power Source: Electric
Terrain: Off-Road
Body Style: Truck
Scale Size: 1:10 Scale
Assembly Level: Ready-To-Run*
Length: 538mm (21.18in)
Width: 282mm (11.1in)
Wheelbase: 322mm (12.68in)
Weight: 1929g (4.25lbs)
Internal Gear Ratio: 2.6:1
Drive: 2WD

Please Note: * This vehicle is fully assembled and ready to run right out of the box, but requires a battery and a charger.

Team Associated's Pro2 SC10 is a Ready-To-Run RC replica of the Pro 2 trucks driven in Off Road Racing. The Pro2 SC10 features a rear motor short-course chassis that uses many of the same parts from the widely successful RC10SC5M platform. Adjustable aluminum big-bore, coil-over shocks, a sealed-gear differential, and heavy-duty CVA driveshafts are all features that come standard on the Pro2 SC10. A powerful water-resistant Reedy electronic speed controller and 3300kV electric motor power the Pro2 SC10 for hours of high-speed fun. To handle the power, the Pro2 SC10 comes equipped with realistic MethodTM Race Wheels and tires specifically made to handle any off-road condition.

A 2-channel 2.4GHz radio system featuring a DVC (Dynamic Vehicle Control) receiver also comes standard in the Pro2 SC10. Protected by the water-resistant enclosed receiver box, the DVC system improves stability in all terrain conditions by automatically counter-steering when the vehicle starts to slide. With a metal-gear, high-torque Reedy servo rounding out the electronics package, the Pro2 SC10 is nothing short of a success in RC off-road racing.

Features

• Based on the 9-time R.O.A.R. National Champion short-course race truck platform
• 2-channel 2.4GHz radio with a DVC (Dynamic Vehicle Control) receiver featuring a built-in adjustable gyro
• High-torque, metal-gear Reedy servo with spring-style servo saver
• Powerful Reedy 3300kV brushless motor
• Water-resistant, high-power Reedy brushless speed control with T-plug connector and LiPo low-voltage cutoff
• Factory-finished short-course racing truck body
• Water-resistant enclosed receiver box
• Durable and lightweight aluminum top shaft
• Low center-of-gravity molded composite chassis with hook-and-loop battery straps that accommodate both NiMH and 2/3s LiPo battery packs
• Durable front and rear body mounts
• Rear CVA drive shafts for more reliability
• Aluminum 12mm big-bore, coil-over shock absorbers
• 2.6:1 ratio gearbox with heavy-duty sealed gear differential and externally adjustable V2 slipper clutch
• Rugged steel turnbuckles for adjustable camber and front toe-in
• Fully adjustable suspension geometry
• Vertical ball ends for roll center adjustments, front and rear
• Metric hardware throughout
• 14 precision rubber-sealed ball bearings
• Many Factory Team options already available!

Specifications

Power Source: Electric
Terrain: Off-Road
Body Style: Truck
Scale Size: 1:10 Scale
Assembly Level: Ready-To-Run*
Length: 538mm (21.18in)
Width: 282mm (11.1in)
Wheelbase: 322mm (12.68in)
Weight: 1928g (4.25lbs)
Internal Gear Ratio: 2.6:1
Drive: 2WD

* This vehicle is fully assembled and ready to run right out of the box. Some models may require a battery and/or charger.

Required To Complete

• (4) AA batteries used in the transmitter
• NiMH or LiPo battery with High Current T-Plug
• Charger for battery

The RC10 4x4 Pickup Truck may be small in size, but is packed full of features. This rig is designed not only for scale looks with realistic wheels, tyres and body, this truck is built for performance as well. The steel ladder frame chassis provides the perfect backbone for this rugged little rig. The 4-link suspension, scale shocks, and soft rubber tyres give the grip and performance needed to climb over the roughest terrain. Transferring power to the rocks is a compact 3-gear transmission, plastic low-friction slider-type drive shafts, front steel CVA axles, and metal shield ball bearings. Get ready to hit the trails with the scale RC10 4x4 Pickup Truck!

Features

• Scale accurate front and rear 4x4 pickup truck bumpers.
• Clear body and box art livery decals included.
• New scale looking shocks all around.
• Dyeable white plastics throughout.
• Classic gold anodized aluminium.
• Gear differentials front and rear.
• Fast Reedy 400 Brushed Motor included.
• Low center of gravity.
• Updated gearing for faster speeds.
• Metal 4-link front and rear suspension.

Specifications

Power Source: Electric
Terrain: Off-Road
Body Style: Truck
Scale Size: 1:12 Scale
Assembly Level: Kit*
Length: 398mm (15.6 in.)
Width: 178mm (7 in.)
Wheelbase: 228mm (9 in.)
Drive: 4WD

Please Note: This vehicle comes as a kit and must be fully assembled by the user.

Required To Complete

• ESC
• Servo
• Battery
• Radio
• Receiver

The Team Associated RC10 4x4 Rally is Engineered for Victory!

Bring the golden era of RC racing into the modern age with this rally-bred powerhouse, outfitted with a new aluminum gold tub chassis plate and iconic RC10 livery decal sheet. The clear 3-piece rally body set, complete with rear bumper and wing, delivers aggressive styling and aerodynamic performance, while injection-molded brake calipers and rotors add realistic scale detail. New rally shock towers, gold anodized aluminum shocks, and a fully adjustable front suspension with upgraded upper arms and turnbuckle set give you the precision handling needed to dominate any surface.

Built for performance and protection, this RC machine includes a water-resistant enclosed receiver box, sealed gear differentials, and a dust-protective chassis cover with an optional filter screen to keep debris at bay. Hardened steel driveshafts and axles, full metal ball bearings, and an aluminum motor plate ensure long-lasting durability. This rally car is ready for anything—from backyard bashing to competition racing.

Features

• Injection molded brake calipers and rotors.
• New fully adjustable front upper Arms.
• New front rally bumper.
• Adjustable turnbuckle set.
• Classic RC10 livery decal sheet included.
• New aluminum gold tub chassis plate.
• New rally shock towers.
• New clear 3pc rally body set with rear bumper and wing.
• New rally chassis dust protective cover.
• Optional dust filter screen included.
• New rally wheels and tyres.
• Gold anodized aluminum shocks.
• Water-resistant, enclosed receiver box.
• Hardened Steel driveshafts and axles.
• Sealed front, center and rear gear differentials.
• Adjustable hook and loop battery straps.
• Full metal ball bearings.
• Aluminum motor plate.
• Adjustable shock mounting locations.
• Bolt-on steering plates.
• Adjustable body post height locations.
• “Shorty” battery box.

Specifications

Power Source: Electric
Terrain: Off-Road
Body Style: Rally
Scale Size: 1:10 Scale
Assembly Level: Kit*
Length: 458mm (18.03in)
Width: 190mm (7.48in)
Wheelbase: 259mm (10.2in)
Weight: Varies
Internal Gear Ratio: 2.6:1
Drive: 4WD

Required To Complete

• Motor
• Battery
• ESC
• Servo
• Receiver
• Paint
• Radio

Please Note: This vehicle comes as a kit and must be fully assembled by the user.

Team Associated is excited to continue to partner with Hoonigan. Built on an improved updated Apex2 chassis, the Team Associated Hoonigan car kits are tyre-slaying beasts!

The Apex2 chassis has been updated from our previous version with the latest features in on-road racing and a more durable 2.5mm thickness chassis.

A front and rear independent suspension with oil-filled, aluminum threaded shocks and active rear toe give the Apex2 kit the ultimate in handling on uneven tarmac. This makes it a perfect platform for any Hoonigan wanting tyre-slaying action!

Features

• Factory Team oil-filled, aluminum threaded shock bodies
• Factory Team front universals
• Factory Team adjustable blue turnbuckles
• Front and rear adjustable sway bars
• G10 2.5mm chassis
• Center aluminum differential spool
• Sealed front and rear differentials
• Adjustable hook and loop battery straps
• Injection-molded brake calipers and rotors
• Aluminum motor plate
• POM-filled injection-molded pivot balls
• Sealed rubber ball bearings
• Steel ring and pinion gears
• Adjustable shock mounting positions
• Front and rear independent suspension
• Fully detailed replica body

Specifications

Power Source: Electric
Terrain: On-Road
Body Style: Touring Car
Scale Size: 1:10 Scale
Assembly Level: Kit*
Length: 458mm (18.03in)
Width: 190mm (7.48in)
Wheelbase: 259mm (10.2in)
Weight: varies
Internal Gear Ratio: 2.6:1
Drive: 4WD

* This vehicle comes as a kit and must be fully assembled by the user. Electronics and/or an engine/motor may be required.

Required To Complete

• 1:10 scale 540-size electric motor (Reedy 540-SL4 3300kV AS907)
• 1:10 scale electronic speed control (Reedy SC600-BL Sensorless Brushless ESC AS29185)
• 2-cell LiPo radio-controlled car battery pack pack (Reedy WolfPack LiPo 5400mAh 35C 7.4V AS753)
• Radio control battery charger (Reedy 1416-C2L Dual AC/DC Charger AS27203)
• 2-channel RC car surface transmitter
• 2-channel receiver
• Steering servo (Reedy 2513MG Digital Metal Gear Servo AS27152)
• Pinion gear (48 pitch)

Team Associated is excited to continue to partner with Hoonigan. Built on an improved updated Apex2 chassis, the Team Associated Hoonigan car kits are tyre-slaying beasts!

The Apex2 chassis has been updated from our previous version with the latest features in on-road racing and a more durable 2.5mm thickness chassis.

A front and rear independent suspension with oil-filled, aluminum threaded shocks and active rear toe give the Apex2 kit the ultimate in handling on uneven tarmac. This makes it a perfect platform for any Hoonigan wanting tyre-slaying action!

Features

• Factory Team oil-filled, aluminum threaded shock bodies
• Factory Team front universals
• Factory Team adjustable blue turnbuckles
• Front and rear adjustable sway bars
• G10 2.5mm chassis
• Center aluminum differential spool
• Sealed front and rear differentials
• Adjustable hook and loop battery straps
• Injection-molded brake calipers and rotors
• Aluminum motor plate
• POM-filled injection-molded pivot balls
• Sealed rubber ball bearings
• Steel ring and pinion gears
• Adjustable shock mounting positions
• Front and rear independent suspension
• Fully detailed replica body

Specifications

Power Source: Electric
Terrain: On-Road
Body Style: Touring Car
Scale Size: 1:10 Scale
Assembly Level: Kit*
Length: 458mm (18.03in)
Width: 190mm (7.48in)
Wheelbase: 259mm (10.2in)
Weight: varies
Internal Gear Ratio: 2.6:1
Drive: 4WD

* This vehicle comes as a kit and must be fully assembled by the user. Electronics and/or an engine/motor may be required.

Required To Complete

• 1:10 scale 540-size electric motor (Reedy 540-SL4 3300kV AS907)
• 1:10 scale electronic speed control (Reedy SC600-BL Sensorless Brushless ESC AS29185)
• 2-cell LiPo radio-controlled car battery pack pack (Reedy WolfPack LiPo 5400mAh 35C 7.4V AS753)
• Radio control battery charger (Reedy 1416-C2L Dual AC/DC Charger AS27203)
• 2-channel RC car surface transmitter
• 2-channel receiver
• Steering servo (Reedy 2513MG Digital Metal Gear Servo AS27152)
• Pinion gear (48 pitch)

The DC10 Classic - Where Going Sideways Becomes an Art Form!

Since 1964, Team Associated has proven to be the leader in the world of competition racing, and now born from our on-road racing legacy, we have engineered the DC10 Classic that sets new standards.

In the thrilling world of RC drifting, balance is everything, and the DC10 delivers precision like never before. With an arsenal of suspension and chassis tuning options at your fingertips, you can fine-tune your ride to perfection.

From camber and caster adjustments to kingpin inclination (KPI) and the exact placement of your motor, servo and battery. Whether you’re a seasoned drifter or just starting to explore the exhilarating world of RC drifting, the DC10 Classic Kit is your ticket to one of the fastest-growing categories in RC racing!

Features

• New 2mm gold anodized aluminum flex chassis Included.
• Classic white molded (dyeable) plastics throughout.
• Gold Anodized aluminum threaded shocks.
• Gold anodized motor plate.
• Adjustable battery placement.
• Fully tunable Ackermann plates.
• Easy-to-adjust camber.
• High and low motor mounting capabilities.
• Adjustable offset wheel hexes.
• Adjustable servo mount locations.
• Precision rubber-sealed ball bearings throughout.
• Rear mounted electronic speed control (ESC) plate.
• Adjustable rear anti-squat and toe-in.
• Competition, low friction Team Associated drift tires included.
• Maximum steering throw for optimal control drifting through turns.
• Easy-to-tune caster adjustments can be made without tools.
• White Team Associated Drift wheels included.
• New Silver adjustable turnbuckles.
• All new clear muscle car style body.

Specifications

Power Source: Electric
Terrain: Off-Road
Body Style: Other
Scale Size: 1:10 Scale
Assembly Level: Kit*
Width: Varies
Wheelbase: 259-332
Internal Gear Ratio: 2.6:1
Drive: 2WD

Please Note: *This vehicle comes as a kit and must be fully assembled by the user.

Since 1964, Team Associated has proven to be the leader in competition racing. And with its roots in on-road racing, it makes sense that our Area 51 engineers would develop the ultimate RC drift car, the DC10. In RC drifting, vehicle balance is key. With the many suspension and chassis tuning options of the DC10, drivers can set up their car with precision. From camber, caster, and kingpin inclination (KPI), to motor and battery position, the Team Associated DC10 1:10 RWD Competition Drift Kit has it all!

Features

• Factory Team hard-anodized threaded aluminum shocks
• Factory Team 2.5mm carbon-fiber drift chassis
• Factory Team 2.5mm carbon-fiber shock towers
• Two Factory Team 2.5mm carbon-fiber top plate options included
• Factory Team blue-anodized aluminum chassis post
• High and low motor mounting options
• +6mm transmission height adjustment insert allows for higher roll center and larger spur gear
• Maximum steering throw for optimal control drifting through turns
• Easy-to-tune caster adjustments can be made without tools
• Adjustable battery placement
• Fully tunable, blue-anodized aluminum Ackermann plates
• Easy-to-adjust camber
• Adjustable offset wheels hexes
• Adjustable servo mount locations
• Precision rubber-sealed ball bearings throughout
• Rear mounted electronic speed control (ESC) plate
• Adjustable rear anti-squat and toe-in

Suspensions

Power Source: Electric
Terrain: On-Road
Body Style: Other
Scale Size: 1:10 Scale
Assembly Level: Kit*
Width: Varies
Wheelbase: 257mm (10.12in)
Weight: Varies
Internal Gear Ratio: 2.6:1
Drive: 2WD

* This vehicle comes as a kit and must be fully assembled by the user. Electronics and/or an engine/motor may be required.

Required To Complete

• 1:10 scale 540-size electric motor (AS27481 Sonic 540-SP5 13.5T Brushless Motor)
• 7.4V-7.6V 2S LiPo with "shorty" battery dimensions (standard or low-profile height) (AS27397 Reedy Zappers SG5 LiPo 4000mAh 130C 7.6V LP Shorty)
• Radio control battery charger (AS27203 Reedy 1416-C2L Dual AC/DC Competition Balance Charger)
• 2-channel RC car surface transmitter and its batteries
• 2-channel receiver
• Steering servo (AS27154 Reedy RS1606A Low-Profile Hi-Speed HV Servo)
• Pinion gear (48 pitch)
• Spray paint for Lexan(R) body
• 1:10 scale wheels and tyres
• Drift steering gyro
• Other helpful items: sSlicone Shock Fluid, Silicone Diff Fluid, Body Scissors (AS1737), Reamer / Hole Punch, FT Wrench Set (AS1519), Hobby Knife, Needle Nose Pliers, Wire Cutters, Soldering Iron, Calipers or a Precision Ruler

The DC10 RTR – Where Going Sideways Becomes an Art Form!

Since 1964, Team Associated has proven to be the leader in the world of competition racing, and now we’re pushing the envelope even further with our RC Drift Car: the DC10! Born from our on-road racing legacy, our Area 51 engineers have engineered a drift machine that sets new standards.

In the thrilling world of RC drifting, balance is everything, and the DC10 delivers precision like never before. With an arsenal of suspension and chassis tuning options at your fingertips, you can fine-tune your ride to perfection. From camber and caster adjustments to kingpin inclination (KPI) and the exact placement of your motor, servo and battery, the Team Associated DC10 1:10 RWD RTR is designed to give you the ultimate drifting experience.

But that’s not all—the DC10 RTR Drift Car comes with a high-performance 3300kV Reedy brushless motor system, set up in a sleek low motor configuration for maximum speed and control. Plus, upgrading and customizing your DC10 is a breeze with a full range of optional and Factory Team parts that fit seamlessly onto the DC10 RTR Drift Car.

For those who crave unbeatable control and stability, the DC10 is equipped with Team Associated’s brand-new competition Drift Tires and a precision-tunable gyro to keep you glued to the track.

Whether you’re a seasoned drifter or just starting to explore the exhilarating world of RC drifting, the DC10 RTR is your ticket to one of the fastest-growing categories in RC racing. Get ready to drift into the action with Team Associated’s DC10!

Features

• 2.5mm G10 chassis and top plate
• Adjustable battery placement
• Fully tunable Ackermann plates
• Easy-to-adjust camber
• High and low motor mounting capabilities
• Adjustable offset wheel hexes
• Adjustable servo mount locations
• Precision rubber-sealed ball bearings throughout
• Rear mounted electronic speed control (ESC) plate
• Adjustable rear anti-squat and toe-in
• 3300kV brushless motor included
• Precision Reedy drift RTR servo
• 2.4ghz transmitter and receiver
• Fully adjustable competition Gyro installed
• New Exclusive Grey Parts
• Competition Team Associated drift tires included
• Detailed, painted Body with body accessories

Specifications

Power Source: Electric
Terrain: On-Road
Body Style: Other
Scale Size: 1:10 Scale
Assembly Level: Ready-To-Run*
Width: Varies
Wheelbase: 257mm (10.12in)
Weight: Varies
Internal Gear Ratio: 2.6:1
Drive: 2WD

*This vehicle is fully assembled and ready to run right out of the box, but does require a battery and charger.

Needed To Complete

• 7.4V-7.6V 2S LiPo with “shorty” battery dimensions (standard or low-profile height)
• Battery charger
• 4 x AA batteries
• AS30133C DC10 RTR Combo Comes with Reedy Battery and Charger

Other Helpful Items

• Silicone Shock Fluid (Refer to catalog for complete listings)
• Silicone Diff Fluid (Refer to catalog for complete listings)
• Body Scissors (AE Part AS1737)
• Easy-to-adjust camber
• FT Wrench Set (AE Part AS1519)
• Hobby Knife
• Needle Nose Pliers
• Wire Cutters
• Soldering Iron
• Calipers or a Precision Ruler

Team Associated is excited to partner with Hoonigan ® to bring you their world-famous Hoonicorn in radio-controlled form. Built on the new Apex2 chassis, the Team Associated HooniganR Hoonicorn is a tire-slaying beast!

The engineers at Team Associated spent countless hours capturing many of the details synonymous with the 1965 Ford Mustang Hoonigan Hoonicorn. Features including officially licensed American Racing VF503 Wheels, rear diffuser, molded intake and turbos, scale brake rotors, and more!

The Hoonigan Hoonicorn Apex2 chassis is equipped with the latest features for on road racing. A front and rear independent suspension with threaded, oil-filled shocks and active rear toe give the Apex2 the ultimate in handling on an uneven tarmac. This makes it a perfect platform for the Hoonicorn and tire-shredding action!

Hoonigan ®

A person who operates a motor vehicle in an aggressive and unorthodox manner, consisting of, but not limited to, drifting, burnouts, doughnuts, as well as acts of automotive aeronautics. One who hoons.

The 1965 Ford Mustang Hoonicorn RTR V2 (HvW2 spec) builds upon where the original Hoonicorn left off. Taking the car that starred in Gymkhana SEVEN, the team modified the 410 cubic inch Roush Yates Ford V8 heart of the Hoonicorn to now feature a custom twin turbo setup from Garrett that feeds the boost through a custom Sitzer Dynamics intake manifold. The end result? 1,400 horsepower that's fed through the Sadev all-wheel-drive system with paddle shifters. The whole package sits on a set of American Racing VF503 wheels with super sticky Toyo Proxes R888R tires. Designed from the start to take a car that was already crazy and make it absolutely insane!

Ford Motor Company Trademarks and Trade Dress used under license to Associated Electrics Inc.

HOONIGAN Trademarks and Trade Dress used under license to Associated Electrics, Inc.

Features

• For better handling, A-arm front and rear independent suspension keeps the Hoonicorn under control during the wildest of driving conditions
• Threaded, oil-filled shocks smooth out the bumps when ripping down the tarmac and shredding tires.
• Active rear suspension allows the amount of toe change to be adjusted through the suspension cycle, increasing, or decreasing rear grip.
• A sealed center driveline keeps dirt and debris out along with bits of tire rubber for smooth and reliable power delivery.
• The Apex2 chassis is equipped with metal ring and pinion gears for long-lasting durability that can handle tire-slaying burn-outs.
• 2.5mm thick G10 chassis ensures that the Hoonicorn continues to "Kill All Tires" regardless of what road debris you may encounter.
• Apex2 with licensed 1965 Ford Mustang Hoonigan Hoonicorn and officially licensed American Racing VF503 Wheels
• Injection molded brake calipers and rotors
• 2.4GHz 2-channel radio system
• Reedy brushed speed control and 3-pole brushed motor
• Water-resistant, enclosed receiver box
• Steel dog bones and drive axles
• Sealed front and rear gear differentials
• Adjustable hook and loop battery straps
• Full metal ball bearings
• Aluminum motor plate
• Adjustable shock mounting locations
• Bleeder screws included on shock caps
• Bolt-on steering plates
• Molded one-piece tie rods and steering links
• Adjustable body post height locations
• Steel 25T servo horn
• 2.5mm thick G-10 chassis for increased durability and performance and G10 shock towers
• "Shorty" battery box
• POM-filled injection molded pivot balls

Specifications

Power Source: Electric
Terrain: On-Road
Body Style: Truck
Scale Size: 1:10 Scale
Assembly Level: Ready-To-Run*
Length: 458mm (18.03in)
Width: 200mm (7.87in)
Wheelbase: 259mm (10.2in)
Weight: varies
Internal Gear Ratio: varies
Drive: 4WD

* This vehicle is fully assembled and ready to run right out of the box. Model requires a battery and/or charger.

Required To Complete

• Four (4) AA batteries used in the transmitter
• LiPo Shorty battery with High Current T-Plug
• Charger for battery used

For the Element RC Enduro12 series vehicles.

Specifications

Input (V): 4.8 – 6.0
Speed (sec/60deg), 4.8V: .11
Speed (sec/60deg), 6.0V: .09
Torque (kg-cm/in-oz), 4.8V: 2.85/39.6
Torque (kg-cm/in-oz), 6.0V: 3.35/46.5
Dimensions (mm): 35.6 x 15 x 30.4
Weight (g): 25
Spline: 25

Fits

• Enduro12 Trail Truck

The XP LED Rock Light Set is a plug-and-lighting set designed to fit the CR12. The set includes four 5mm white LEDs which fit directly into the stock CR12 slider/nerf bar mounts. Connect the receiver plug to any open port in the receiver and enjoy some night trail runs.

Your Team Associated LED light kit is warranted to the original purchaser for 30 days from the date of purchase, verified by the sales receipt, against defects in material and workmanship. Product that has been mishandled, abused, used incorrectly, used for an application other than intended, or damaged by the user are not covered under warranty. Associated Electrics Inc. is not liable for any loss or damage, whether direct or indirect, incidental or consequential, or from any special situation, arising from the use, misuse, or abuse of this product.

Fits

• CR12

This 5mm blinking red LED tail light is a direct fit into the RC10F6 rear wing. Plug and play lighting!

Team Associated's Pro4 SC10 is a Ready-To-Run RC electric short-course truck---all show and all go! It features some major upgrades not normally found in RTRs, including a water-resistant high-power Reedy brushless speed control, Reedy 3300kV brushless motor, water-resistant enclosed receiver box, adjustable oil-filled coil-over shock absorbers, and four-wheel independent suspension. Drivetrain features three heavy-duty sealed gear differentials. The short course proudly rolls and jumps on Fifteen52 Turbomac HD wheels wrapped in realistic off-road General Tire GT® Grabber™ all-terrain tires.

The 2.4GHz 2-channel radio system and a digital high-torque Reedy servo round out the Pro4 SC10 as a potent short-course contender!

Features

• 2.4GHz 2-channel radio system
• High-torque digital servo with spring-style servo saver
• Powerful Reedy 3300kV brushless motor
• Water-resistant high-power Reedy brushless speed control with T-plug connector and LiPo low-voltage cutoff
• Three sealed gear differentials
• Factory-finished Contender short-course body
• Durable, impact-absorbing front and rear bumpers with LEDs
• Fifteen52 Turbomac HD wheels
• High-grip General Tire GT® Grabber™ all-terrain tires
• Threaded, oil-filled coil-over shock absorbers
• 4mm heavy-duty adjustable alloy steel turnbuckles
• Durable slider type drive shafts
• Steel center driveshaft
• Four-wheel independent suspension

Specifications

Scale: 1:10
Power: Electric
Length: 565.15mm (22.25”)
Width: 292.1mm (11.5”)
Weight: 1850g (4.10lb)
Wheelbase: 329.0mm (12.96”)
Transmission Ratio: 2.85:1

Required To Complete

• 6-cell NiMH or 2-3S LiPo battery with High Current T-Plug
• Charger for battery used
• Four (4) AA batteries

Team Associated's 1:14 scale Reflex 14MT 4WD electric monster truck comes out of the box assembled and ready-to-run! It features a Reedy Power brushless speed control and motor, high-torque digital steering servo, and 2.4GHz radio system. With all that power available at your disposal, you know this monster truck was designed with performance in mind. The versatility offered by the all-terrain tyres, adjustable wheelie bar, turnbuckles, caster blocks and rear hubs make the Reflex 14MT ready for any terrain you can throw at it.

Additional features include full metal diff ring and pinion gears, three sealed differentials, aluminum steering rack, lightweight aluminum center driveshaft, and durable, impact-absorbing front bumper with LEDs. With the Reflex 14MT RTR you can now have big performance in a small scale Ready-To-Run package!

Please Note: This vehicle needs extra parts to make it operational such as motor and battery pack.

Features

• New! Blue and purple stripes monster truck body
• Durable, impact-absorbing front bumper with LEDs
• Rugged adjustable wheelie bar
• High-traction all-terrain monster truck tires
• Full metal diff ring and pinion gears
• 2.4GHz 2-channel radio system
• High-Torque Digital Servo with spring-style servo saver
• Powerful Reedy 4500kV brushless motor
• Water-resistant high-power Reedy brushless speed control with T-plug connector
• Three sealed differentials
• Threaded coil-over shock absorbers
• Adjustable turnbuckles
• Adjustable inserts for caster blocks and rear hubs
• Aluminum steering rack
• Front universal driveshafts
• Molded tub chassis with covered center driveshaft
• Aluminum center driveshaft
• 12mm drive hex

Specifications

Power Source: Electric
Terrain: Off-Road
Body Style: Monster Truck
Scale Size: 1:14 Scale
Assembly Level: Ready-To-Run*
Length: 492.4mm (19.39in)
Width: 237mm (9.33in)
Wheelbase: Varies
Weight: Varies
Internal Gear Ratio: 2.46:1
Drive: 4WD

* This vehicle is fully assembled and ready to run right out of the box but does require a battery and/or charger.

Required To Complete

• Four AA batteries for radio
• 2S LiPo battery
• Charger for above battery

The new Team Associated RC28 ZOOM is a scale replica of the iconic RC10 Brian Kinwald Edition Kit! This RC28 ZOOM looks great and drives smooth thanks to a powerful electric motor and capable drivetrain.

The included 2.4 GHz transmitter allows complete control enabling you to navigate around, through and over obstacles with ease! With its off-road stance and rubber tyres, the RC28 ZOOM handles like no other vehicle in its category.

The vehicle’s integrated battery is easily recharged with the included USB-C cord. So the RC28 ZOOM is ready to go right out of the box! Just charge and drive!

Features

• 2.4GHz transmitter Included.
• Included USB-C charging cord to charge the integrated battery.
• Fully pre-printed and decaled RC10 buggy replica body.
• Realistic wheels and rubber tyres.
• Everything included in the box - just charge and go!

Specifications

Power Source: Electric
Terrain: Off-Road
Body Style: Buggy
Scale Size: 1:28 Scale
Assembly Level: Ready-To-Run*
Length: 143mm (5.63in)
Width: 86mm (3.39in)
Wheelbase: 101.5mm (4in)
Weight: 76.2g (0.17lbs)
Internal Gear Ratio: Varies
Drive: 2WD

Please Note: *This vehicle is fully assembled and ready to run right out of the box.

Introducing the Team Associated TC28 4WD Team Kit. This compact on-road race car is designed with the same engineering precision found in every AREA 51-developed product. Though small in scale, the TC28 delivers big performance in an easy to set up package. Featuring an independent front and rear suspension, constant velocity driveshafts, 4WD mid-motor configuration with equal length belts, fluid filled gear differentials with height and belt tension adjustment and a front and rear anti-roll bar.

The steel chassis plate provides a low center of gravity while the insert adjustable roll center enables chassis roll adjustment based on the grip level. White wheels and RadBody Mako X2 included. This TC28 is compatible with all 28th scale Reedy electronics. Compact, tunable, and designed to race, the TC28 is built for high performance and fun—even in tight spaces.

Features

• Steel chassis plate for low center of gravity.
• Belt driven 4WD.
• Independent suspension front and rear.
• Mid-motor configuration with equal length belts (front and rear).
• Fluid filled gear differentials front and rear with height and belt tension adjustment.
• Anti-roll bar system for front and rear suspension.
• Silicone grease lubricated shocks.
• Constant velocity driveshafts.
• RadBody Mako X2 included.
• Compatible with all Reedy Electronics for 28th scale.
• White wheels included that fit optional front wheel flanges to tune steering feel.
• Universal front bumper included.

Specifications

Power Source: Electric
Terrain: On-Road
Body Style: Other
Scale Size: 1:28 Scale
Assembly Level: Kit*
Length: 140mm (5.51in)
Width: Varies
Wheelbase: 98mm (3.86in)
Weight: Varies
Internal Gear Ratio: Varies
Drive: 4WD

Please Note: * This vehicle comes as a kit and must be fully assembled by the user.

Required To Complete

• Motor
• Battery
• ESC
• Servo
• Receiver
• Paint
• Tyres
• Radio

Recommended Electronics

• Motors (AS27506 SONIC 1525 5500kV Micro Brushless Motor).
  (AS27507 6800kV Sonic 1525 6800kV Micro Brushless Motor).
• Battery (AS27610 REEDY POWER 400mAh 60C 7.4V 1:28 Stick Battery).
• Servo (AS27175 REEDY RS0305A Micro Hi-Speed Servo).
• ESC (AS27045 REEDY BLACKBOX 300R Competition Micro ESC).
• Charger (AS27203 Reedy 1416-C2L Dual AC/DC Competition Balance Charger).