Tamiya Electrics

Range of 8 Connectors to fit various chargers with 4mm Output Sockets.

Plug types include:

• T-Deans; 4mm Plug
• 3 various servo plugs
• Tamiya style and 3 other.
• Can be used with all makes of charger fitted with 4mm output sockets.

Sold as seen.

Appears to be in good working order. Front ball diff apparently. Signs of use underneath. The body has no cracks. 

One of the most popular Hobbywing brushed speed controls, the WP1060 is now available with a XT60 Plug from Yikong

- A great alternative to Tamiya for those who prefer this plug style.

- Already pre soldered just plug and play.

Easy Operation
This ESC is specially designed for new beginners and intermediate modelers; it not only carries forward the outstanding quality of HOBBYWING products but simplifies the operation.

Applicable to All Weather Conditions
The waterproof and dust-proof design allows the QUICRUN WP-1060 Brushed to be used in all weather conditions without any issue of damage caused to the ESC from water or dust.

High Reliability & Durability
Reliable hardware combined with advanced software technology allows the QUICRUN WP 1060 Brushed to not only provide high power output but also overload protection of the ESC circuit.

Easy to Use
This ESC features auto throttle calibration and parameter setting via jump caps is easy-to-use, especially applicable to new beginners.

Wide Application
This ESC is designed for 1/10th scale touring cars, buggies, short-course trucks, monster trucks, trucks, crawlers and tanks.

Specifications
- Waterproof
- Cont./Peak Current - 60A/360A
- Input - 2-3S LiPo/6-9 Cells NiMH
- BEC Output - Switch Mode:6V/3A
- Input Wires - Red-16AWG-100mm*1/Black-16AWG-100mm*1
- Output Wires - Blue-16AWG-100mm*1/Yellow-16AWG-100mm*1
- Input Connectors - XT60
- Output Connectors - 4.0 Bullet Connectors (Female)
- Size - 36.5x32.0x18.0mm
- Weight - 39g
- Motors - Brushed Motors 2S - 12T limit, 3S - 18T limit
- Vehicles - 1/10th Touring Cars/Buggies/Trucks/Rock Crawlers

One of the most popular Hobbywing brushed speed controls, the WP1060 is now available with a XT60 Plug from Yikong

- A great alternative to Tamiya for those who prefer this plug style.

- Already pre soldered just plug and play.

Easy Operation
This ESC is specially designed for new beginners and intermediate modelers; it not only carries forward the outstanding quality of HOBBYWING products but simplifies the operation.

Applicable to All Weather Conditions
The waterproof and dust-proof design allows the QUICRUN WP-1060 Brushed to be used in all weather conditions without any issue of damage caused to the ESC from water or dust.

High Reliability & Durability
Reliable hardware combined with advanced software technology allows the QUICRUN WP 1060 Brushed to not only provide high power output but also overload protection of the ESC circuit.

Easy to Use
This ESC features auto throttle calibration and parameter setting via jump caps is easy-to-use, especially applicable to new beginners.

Wide Application
This ESC is designed for 1/10th scale touring cars, buggies, short-course trucks, monster trucks, trucks, crawlers and tanks.

Specifications
- Waterproof
- Cont./Peak Current - 60A/360A
- Input - 2-3S LiPo/6-9 Cells NiMH
- BEC Output - Switch Mode:6V/3A
- Input Wires - Red-16AWG-100mm*1/Black-16AWG-100mm*1
- Output Wires - Blue-16AWG-100mm*1/Yellow-16AWG-100mm*1
- Input Connectors - XT60
- Output Connectors - 4.0 Bullet Connectors (Female)
- Size - 36.5x32.0x18.0mm
- Weight - 39g
- Motors - Brushed Motors 2S - 12T limit, 3S - 18T limit
- Vehicles - 1/10th Touring Cars/Buggies/Trucks/Rock Crawlers

Upgrade part for you to install shorty packs onto your Tamiya TT02, quick battery change with the included elastic bands

Feature:

• For: Tamiya TT02 Series (TT02,TT02B, TT02D ,TT02R,TT02SR, TT02S,TT02SRX)
• Material: Aluminum
• Color: Blue

Include:

• Aluminum Short Battery Holder Set (1pc)

VOLTZ LI-ION 7.4V 2600MAH BATTERY WITH TAMIYA PLUG

Specifications

Plug: Tamiya
Balance: Connector XH
Dimensions (mm): 73 x 37 x 19 (Length includes wires at the end.)
Weight (g): 100g
Watt Hours (Wh): 19.24
Suitable For: Heng Long Tug Boat

Tamiya 58762 Clod Buster - Heritage Big-Foot Monster at 1/10 Scale

The Tamiya 58762 Clod Buster returns as a purposefully styled monster truck kit for hobbyists who want strong scale presence and an iconic silhouette. The 2026 edition concentrates on the model's visual bulk and classic big-foot proportions instead of focusing on weight-saving or competition traits. The design language is evident in the body contours, wheel spacing, and the general arrangement that references the original Clod Buster persona.

Chassis and mechanical character

The offering centres on a Big-Foot style chassis that highlights visual scale and a rugged look. Structural choices promote a wide stance and a tough-looking underframe, giving the built model a solid, grounded appearance. You can expect layout choices that accommodate larger wheels and clear fender gaps, reflecting typical monster truck styling for this segment.

Bodywork and scale presence

The Clod Buster body recreates the large fenders and raised ride height associated with big-foot trucks. Panel proportions and detail placement are organised to read well at 1/10 scale, helping the model stand out on display. The shell and accessories stress recognisable silhouette cues rather than minute surface detail, aligning with the kit's collector and display intent.

Suitability and intended audience

This kit is aimed at builders and collectors who prefer assembling a visually commanding monster truck. The 58762 Clod Buster is best for those seeking a heavier-looking truck for display or casual off-road activity rather than for those focused on lightweight competitive builds. The assembly presents an opportunity to build a classic monster truck within Tamiya's established kit format.

Build impressions without procedural guidance

The structural choices and component layout suggest a moderate level of assembly complexity typical of branded plastic kits in this class. Fit and finish are intended for hobbyists comfortable with kit construction; careful assembly will produce the most satisfying visual results. The emphasis is on recreating the Clod Buster's appearance at a display-friendly scale while keeping the mechanical side straightforward.

About the model

    This is a 1/10 scale R/C model assembly kit. Length: 480mm, height: 380mm.
    The injection moulded PS body is red like Item 58065.
    The front grille design is changed from Item 58065.
    Comes with new additional stickers which have additional illustrations of a female character.
    With the updated front sections, LED lights (sold separately) can be installed.
    Features the same 4WD & 4WS chassis as the Super Clod Buster.
    Electronic Speed Controller is included.

Separately Required Items

What's included?

• ESC (TWIN VERSION)
• 2x Type 540 motor
• Unfinished body is red in colour

What's needed?

• Transmitter & receiver
• Servo
• Battery and charger
• Tools to help with assembly of the kit

The Tamiya 58762 Clod Buster is a purposefully styled 1/10 monster truck kit that foregrounds big-foot design and display impact, making it well suited to kit-minded hobbyists and collectors.

• 1/10 scale R/C model assembly kit. Length: 425mm, width: 189mm, height: 145mm. Wheelbase: 257mm
• Features a 1.0mm thick polycarbonate body
• Dish-type wheels are moulded in white ABS plastic, and paired with treaded tyres
• Stickers and window painting masking stickers for use in the paint process included
• The TT-02 chassis is a highly versatile shaft-driven 4WD unit, based around a durable bathtub
• 4-wheel independent double wishbone suspension has identical arm and upright parts for ease of maintenance
• A wide range of Hop-Up Option parts is available to customize your chassis
• Includes 540-brushed type motor with ESC
• Requires: 2-channel radio, steering servo, 7.2-7.4volt battery pack and compatible charger, and Tamiya PS polycarbonate paint

Advantage IQ801 Delta Peak Charger (UK) 1A - NiMh4-8N (Tamiya)

Ex Hire Vehicle:

Comes with:

• Etronix Stick Radio with Dual rates for both steering and thottle for slowing down
• Hobbywing 1060 Brushed ESC and Brushed Motor
• M-Chassis wheels & Tires
• Complete and tested working with New 21T Pinion

Just add a 7.4V Stick Pack Battery & Charger to complete

Body is well used as shown.

This is one of our Hire Cars / Euro Trucks

• This has been driven only here at Skegness Models for Hire
• 19T Pinion
• Tamiya Torqued Tuned Motor
• Hobbywing 1060 ESC
• Used Euro Truck Tyres
  
• Etronix Stick Type .4ghz Radio Controller with Dual rate on steering and throttle to allow speed limiting (costed when new £59.99)
• Used 1/10 TC Body and 1/14 Euro Truck Body
• Etronix Metal Geared Ball Raced sefvo and high torque servo saver fitted.
• Adjustable servo link
• Blue Tamiya Alloy Prop and Bearings throughout
• DAMAGE to front chassis brace - see picture - this part has been needing to change for months now, but has remained strong with a tie rap - Would need a replacement £9.99 chassis to be 100% - we do not have the time, but can supply the part at cost on request.
• Model is striaght off the track in working order - not rebuilt, but tested good order.

Needs a 7.4v Lipo or Nimh Battery & Charger to complete

May need some AA batteries for handset.

PLEASE READ TITLE FOR SIZE - THESE ARE CUSTOM PRINTED AND WE MUST ALLOW FOR A 10% DEGREE IN SLIGHT MANUFACTURING ERROR.