RC Vehicles

Even more speed with brushless motor! With its muscular body and supercharger, this machine makes a visual statement to back up its powerful performance!

<Technical Data>

- Length 507mm
- Width （Body width） 195（210）
- Height 128mm
- Wheelbase 274mm
- Tread (F/R) F：167mm／R：167mm
- Tires (F/R) F：φ64x27.7mm／R：φ64x27.7mm
- Gear Ratio 6.54：1
- Weight 1680g (approx.)
- R/C system Syncro KT-231P+
- Motor TORX10E

<Readyset Contents>

- Completed chassis with R/C radio installed
- Factory assembled body complete with color scheme
- Syncro KT-231P+ transmitter
- Hexagonal wrench
- Spanner
- Setting change parts -

Full Readyset version with

• Battery GensAce Bashing LiPo 2S 7.4V-5000-60C (Deans) 136x48x25mm 250g G-Tech included
• Charger GensAce Charger iMars Mini 60W USB-C (2-4S)included

<Required for Operation>

- 4 x AA batteries for transmitter
- Tools

Designed and built for the pure enjoyment of R/C car driving, the FAZER Mk2 welcomes this brushless motor addition to the series. Powering up from the conventional G14L brushed motor to the TORX 10E brushless motor, the 1.6 x speed boost delivers 65km/h (up from about 40 km/h) backed up by the newly incorporated BRAINZ 10 speed controller, sintered pinion gear and aluminum HD center shaft L (previously an optional upgrade) to support the extra power and higher RPMs. This fully upgraded version of the VE specifications boasts an ultra-scale 1970 Dodge Charger body much loved in America, with a Kyosho designed supercharger, and features light buckets that can be equipped with front and rear LEDs and open/close function for concealed headlights. Kyosho’s original color scheme pays homage to the rebel image of this machine and this ‘1970 Dodge Charger Supercharger Spec VE Gray’ is packaged as a pre-built Readyset, so its easy even for beginners to enjoy without delay. Just use your own battery, battery charger and transmitter to experience the first brushless motor-powered model in the VE series!

- Ultra-scale body specifications feature concealed headlights with open/close function and a Kyosho designed supercharger. In addition, LED compatible headlights, taillights, wipers, mirrors, and fuel fillers are being designed.

- Install micro servo (sold separately), to operate the open/close function of the concealed headlights using the 3rd channel of the KT-231P + transmitter included in the Readyset.

- Elevate the scale finish by installing 97054 LED light unit series (sold separately) in the front and rear light buckets.

- Equipped with high-power TORX 10E motor. In addition, sintered pinion gear (32T) is equipped as standard to reliably transmit the full force from the motor.

- Waterproof BRAINZ 10 60A ESC with cooling fan provides stable power without heat loss.

- Equipped with vintage touring car (VTC) tires with compound optimized for brushless performance, and new color Rostyle-type wheel design to match the classic style of the Dodge Charger.

- Aluminum center shaft prevents twist and delivers high-RPM drive. Shaft-driven full-time 4WD touring chassis provides easy handling and is a joy to drive for anyone.

- Includes advanced functioning KS4031-06W steering servo as standard.

- Factory-completed Readyset only requires 4 x AA batteries for the transmitter as well as a charger and battery for the chassis.

- Full ball bearing specifications reduce drive loss in all drive components.

- Sealed differential and transmission realize excellent reliability, even in dusty parking lots.

- Equipped with a plated dummy brake disc and painted brake caliper for an elevated sense of scale.

- Uses hexagonal button screws throughout. Allows secure tightening torque to be applied and maintenance with fewer tools.

- Motor mount has mounting holes according to pinion gear, eliminating the need for tricky backlash adjustment. Supports pinions from 29T to 37T.

- Wide range of optional parts are available to further boost driving performance.

HD center shaft L is equipped as standard to prevent twisting and support high-speed performance. The simple and functional main chassis uses lightweight impact-resistant nylon to reduce weight and an integrated gearbox that optimizes torsional rigidity to deliver a low center of gravity. The simple upper-deckless design realizes strength through each component and section.

Equipped with the advanced functionality of the KS4031-06W steering servo. The front suspension optimizes bump steer and scrub radius for improved handling and features interchangeable front left and front right ball-connected steering knuckles that deliver smooth operation and high crash resistance.

High-powered TORX 10E brushless motor. The sealed motor case prevents foreign objects from entering the motor and gearbox.

BRAINZ 10 speed controller with cooling fan for brushless motors. Program settings can be changed to suit different conditions and it’s also waterproof so you can even run through the rain or small puddles.

Equipped with oil shocks as standard. Vehicle height can be adjusted by changing the included ball ends and spring spacers according to the vehicle type and setting.

Sintered 32T pinion gear is equipped as standard for reliable transfer of the high-powered force from the brushless motor. 68T and 32T are standard settings for spur gears and pinion gears respectively, however a total of 9 pinion gear variations from 29T to 37T are available to suit various motors for a wide range of gear ratio settings. In addition, set positioning of the motor according to the number of teeth of the pinion gear reduces problems with backlash adjustment..

Features VTA tires with compound optimized for brushless motor performance in combination with new color Rostyle type wheels.

Defining the era of American muscle, the unique characteristics of the ever-popular Dodge Charger have been recreated with concealed headlights equipped with open/close function (operated by optional micro servo on 3rd channel) and the Kyosho designed supercharger. The coke-bottle lines of the semi-fastback 2-door hardtop is immaculately reproduced in a 1/10 scale polycarbonate body.

Front and rear light buckets are compatible with the 97054 LED light unit series (sold separately). Install the LED light unit to recreate the ultimate Dodge Charger reality.

Kyosho Fazer FZ02 (L) Dodge Challenger SRT 2015 Blue 1:10 Readyset

"The American muscle car" Dodge Challenger SRT Hellcat "that everyone longs for is reproduced with a high quality body! "

<Readyset Contents>

- Completed chassis with R/C radio installed
- Factory assembled body complete with color scheme
- Syncro KT-231P+ transmitter
- Hexagonal wrench
- Spanner
- Setting change parts

<Required for Operation>

- 4 x AA batteries for transmitter
- Battery for chassis (recommended: 7.2V Ni-MH battery or 7.4V Lipo)
- Charger for battery for chassis
- Tools

<Technical Data>

- Length 486mm
- Width （Body width） 190mm（200mm）
- Height 144mm
- Wheelbase 274mm
- Tread (F/R) F：174mm／R：174mm
- Tires (F/R) F：φ66×25mm／R：φ66×25mm
- Gear Ratio 6.5：1
- Weight 1650g (approx.)
- R/C system Syncro KT-231P+
- Motor G14L

For the pure enjoyment of R/C car driving, the combination of a beautifully reproduced car body with the FAZER series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance to a new level. A simplified design with fewer parts has improved maintenance efficiency and reduced weight while core strength and rigidity has been increased through new materials and ribbing and stiffeners on front and rear. In addition, the symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, irrespective of power source. Featuring front & rear gear differentials, oil shocks and full ball bearing specs, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 260mm by replacing some parts (sold separately) for compatibility with other 1/10 scale body styles, in addition the body included. The Readyset package comes fully assembled and includes everything except charger and battery for the chassis, and batteries for the transmitter.

- Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter, and battery with charger for the chassis.
- Full ball bearings that reduce drive loss equipped throughout the drive system.
- Features KS202W waterproof steering servo.
- Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces.
- Shaft drive full-time 4WD touring chassis（FZ02）.
- Equipped with a plated dummy brake disc and a painted brake caliper to improve the sense of scale.
- Uses button screws with hexagonal holes in each part. Reliable tightening torque can be applied, and maintenance is possible with even fewer tools.
- Since the motor mount has mounting holes according to the pinion gear, troublesome backlash adjustment is unnecessary. Supports from 29T to 37T.
- Performance can be further enhanced by installing various optional parts.

Simple low center of gravity upper deckless chassis design features an electronic speed controller and receiver cover as well as a one-piece gearbox that optimizes main chassis torsional rigidity and strength while reducing weight with the introduction of lightweight impact-resistant nylon.

Features a reduced number and variety of screws and parts, and consolidation of frequently used screws into the same size. Most screws are flat head screws that can be removed with a 2.0mm hex wrench for easy disassembly.

Handling factors such as bump steer and scrub radius are optimized on front suspension. Simple ball-connected steering knuckle promises reliable control movement. Interchangeable on both front and rear left-right hub carriers optimize spare parts utilization and improve maintenance efficiency.

Oil shocks mark an evolutionary step up from previous models Oil shock is newly designed. Optimal front-rear geometry and balance simultaneously delivers both light handling and precise control.

Standard spur and pinion gear setting is 68T and 32T, but 9 pinion gear settings can be used from 29T – 37T to produce a wide range of gear ratio settings. Also, motor is mounted directly according to the pinion gear modules.

Original low-profile semi-slick pattern tires produce superior performance.

Comes with the new powerful 550 size 14T brushed motor(G14L). The long can with Steel ring around the motor case and internal cooling fan provides efficient torque and high speeds.

Front grille compatible with the separately sold 97054 LED light unit series.By installing the LED light unit, improves scale realism for body shell.

(Needs Battery & Charger to complete - photo shows a stick pack battery fitted but not included)

Q: Can this be raced at Skegness Model Raceway? YES!!! Just buy a decent 4000mah or higher 7.4v Lipo and you'll be racing in no time!

FTX MK2RS 1/10 BRUSHLESS 4WD RALLY CAR RTR - WHITE

If you asked a rally fan what era still stirs the soul, chances are they’d say the 70s and 80s, the ‘golden era ‘of rallying. Iconic cars, legendary drivers, and fierce manufacturer rivalries defined this time.

Now, FTX brings that spirit roaring back with the MK2RS 1/10th Rally Car, a high-performance platform packed with premium features and retro-inspired styling.

Assembled and finished with a highly detailed pre-painted bodyshell and applied decals, the MK2RS comes factory-fitted with working scale LED light including front fog lights, headlights, and taillights, so you’re ready for any stage, rain or shine.

With a 2.4ghz radio system, 3S rated Hobbywing 60A brushless electronic speed control, 4000kv 3652 brushless motor and Etronix 9kg metal geared steering servo you are all set with some high-quality electronics from the off. Just add your choice of 2S or 3S shorty LiPo battery to complete the package and get ready to set some blistering sector times.

Under the hood the MK2RS rally platform features a rugged and tunable platform with a host of high-end components to ensure you make it to parc fermé in one piece. Along with a 2.5mm aluminium chassis, CNC machined alloy parts such as suspension mounts, sliding motor mount, oil filled shocks, servo mount, steering plate all come as standard. Carbon fibre shock towers, front and rear, along with servo mounting plate are items usually reserved for the options list.

The 4wd transmission utilises a 3-differential design for maximum stability and drive under power, all assembled with high precision metal gears throughout for maximum durability. Fine tuning of the double wishbone suspension is a simple task via the adjustable turnbuckle links throughout.

Low profile style gravel spec tyres provide the traction with optional block and treaded patterns available for different conditions.

With a sealed drivetrain and underbody most debris are kept out, allowing you more time rallying and less time cleaning in the garage.

If you love rally, love speed, love scale, love dust and dirt then the MK2RS is calling!

Features

Aluminium chassis with Side Guards. Front, centre and rear metal bevel geared differentials.

Carbon fibre shock towers. CNC aluminium suspension mounts, along with motor and centre diff mounts.

CNC Aluminium Hard Anodised Adjustable Shock Absorbers. Aluminium Wheel Hexes.

9kg Metal Geared Steering Servo. Sealed Transmission.

Front Foam Bumper and CVA Driveshafts. Fully Adjustable Suspension.

CNC Aluminium Steering Bar and Ballraced Steering Assembly.

More Features

• Etronix 2.4ghz Radio System.
• Etronix Brushless 3652 4000kv Motor.
• HobbyWing WP-10BL60 Speed Control.
• Supports both 2S and 3S LiPo batteries.
• Etronix 9kg Metal Geared Servo.
• CNC Aluminium Hard Anodised Shock Absorbers.
• CNC Aluminium Centre Diff and Motor Mount.
• CNC Aluminium Front and Rear Suspension Arm Mounts.
• CNC Aluminium Servo Mount.
• CNC Aluminium Steering Bar.
• Aluminium 2.5mm Chassis.
• Carbon Fibre Servo Plate.
• Carbon Fibre Front and Rear Shock Towers.
• 3 Differential Transmission with Metal Gears.
• Front CVA Driveshafts.
• Rubber Sealed Ball Bearings.
• Protective Inner Chassis Body.
• Detailed Semi-Scale Rally Body with LED Lights.

Specifications

Length: 440mm
Width: 190mm
Height: 150mm
Wheelbase: 260mm
Tyre: ø 72 x 25mm
Weight: 1600g (w/o battery)

Required To Complete

• 1 x LiPo Balance Charger
• Short 2S or 3S Lipo
• 4x AA for handset

Get ready for some big r/c off road action from the pocket rocket Tracer Truggy from FTX. The perfect entry into a world of r/c fun, the Tracer features coil sprung shock absorbers with moultiple mounting points, double wishbone suspension and front universal driveshafts for smooth suspension movement while steering through the ruff stuff. Shaft driven 4WD and with geared differentials front and rear provide traction in all conditions.

Powered by a 390 sized brushed motor and micro 7.4 800mAh 2S Li-Ion battery, the Tracer is fast and nimble....perfect for bashing, jumping and more! For those that are new to r/c cars we have included a speed switch to help dial the speed of the Tracer and make it more manageable for new drivers.

Fancy some dusk driving as the light fades? Just plug-in the supplied front LED bumper lights to light the way.

With a choice of two bodyshell colour schemes as well as a Tracer Truck on the same platform you can even bash with friends and family!

Features

• 99% Ready-To-Run
• 2.4ghz Radio System
• Fully Proportional Throttle And Steering
• Splashproof ESC/Receiver Unit
• Splashproof 1kg Rated Servo
• RC390 Brushed Motor With Heatsink
• Front & Rear Geared Differentials
• Coil Sprung Shock Absorbers
• Double Wishbone Suspension
• Front CVA Driveshafts
• Low Friction Ball Bearings
• Micro 7.4 800mAh 2S Li-Ion Battery
• USB Charger
• Detailed 4x4 Off Road Truck Bodyshell
• Plug-In Front LED Lights Included
• Oversized Wheels & Block Pattern Tyres
• Length: 270mm Width: 215mm
• Range Of Options Available

Specifications

Length: 285mm
Width: 215mm
Height: 95mm
Ground Clearance: 38mm
Wheelbase: 175mm
Weight: 740g
Tyre: ø 78mm x 41mm
Gear Ratio: 1:10.71

Drivetrain Upgrade Notes

If you plan on upgrading your Tracer’s drivetrain each of the following components will required to complete this upgrade:

• 1 x FTX9776 – Centre Driveshaft and Cups
• 1 x FTX9777 - Machined Metal Spur Gear
• 2 x FTX9778 - Machined Metal Diff Gears

Declaration of Conformity

FTX5577G Declaration of Conformity

No black wing seat ( Painted body and wing only - stickered )

FMS FSC24 1/24TH CHASER TRUCK RTR - PURPLE

The Baja 1000 Rally, is one of the most challenging and thrilling off-road events in the world. Each year, hundreds of drivers and teams converge on the deserts, rivers, mountains and wilderness to participate in this magnificent rally. Dating back to 1967, the Baja 1000 Rally began as an adventure event organised by Mexican racers Ed Pearlman and Don Francisco, with only 68 cars competing on a 1,000-mile (1,609-kilometer) course. Later, the event evolved into a professional international car rally.

Short-course trucks, also known as light trucks, are typically used for urban and short-course transportation with a focus on freight efficiency and agility. However, in the Dakar Rally, these short-course trucks receive a thorough modification to cope with the challenges of the course's tough terrain such as desert dunes, rocks, rivers and mountains. Such modifications include increasing suspension travel, reinforcing the chassis, installing special tires, upgrading the safety of the cockpit, and more. These modifications enable the short course trucks to excel in races that challenge extreme terrain and weather conditions.

The model is available in 2 cool paints, the shell is made of plastic blister process, with highly designed stickers, which can catch people's eyes at the first time in any terrain.

FMS has newly developed the new generation FSC24 chassis which has front independent suspension and rear straight axle.

The frame is made of high-strength nylon uni-body molding, which is lighter in weight and stronger. The mid-mounted power unit has a low center of gravity and integrates a two-speed transmission structure and a 370 high-speed brushed motor into a single unit, with a maximum speed of 26km/h. The two-speed transmission switched via CH3 of the remote control, and the front and rear axles are equipped with a metal planetary tooth differential as standard, which transmits strong torque and supports high-speed off-road driving with a simulated stance and a powerful cornering performance.

Features

• Two-speed Transmission.
• Metal-gear Steering Servo.
• Independent Suspension And Straight Axle.
• High Strength Integrated Nylon Frame.
• Full Ball Bearings.
• Front And Rear Axle Metal Planetary Gear Differentials.
• Original Personalised Stickers.

Specifications

Radio Control: n/a
Model Vehicle: 236 x 143 x 107mm
Tire: Φ 54×23mm
Wheel Base: 140mm
Minimum Ground Clearance: 33mm
Approach Angle: 63°
Departure Angle: 53°
Driving Speed: n/a
Remote Distance: 80m
Play Time: 30 minute

What's Included

• 1 x 1:24 FSC24 CHASER
• 1 x 2.4GHz G3 Radio
• 1 x 2-in-1 R3B Receiver & ESC Set (installed)
• 1 x 370 Brushed Motor (installed)
• 2 x 13g Metal Gear Servo (installed)
• 1 x 2S Lipo 7.4V 900mAh 25C XT30 Battery
• 1 x USB Battery Charger
• 1 x Hex Wrench Socket
• 1 x Product Manual

Needed To Complete

• AAA Batteries for Radio

FMS FCX24 1/24TH UNIMOG SCALER RTR - RED

Licensed by Daimler-Benz AG, the FMS Unimog features numerous scale details, for a faithful reproduction of the full-size work horse. A detailed grille widened rear-view mirrors and snorkel and two orange warning lights on the roof. Through the windows, you can see the exquisite dashboard and cabin interior. The engine hood can be opened, providing a convenient battery location as well as serving as a storage space for the electronics. In addition, the rear cargo compartment and the three-side wall have carved intricate patterns moulded to simulate the texture of real wood.

Unimog adopts the FCX24 crawler chassis. The mid-mounted power assembly has a low center of gravity and integrates the 2-speed transmission, transfer case and 130 motor. Power is transmitted to the front and rear axles through the universal joint drive shaft and axles are equipped portal axles which increase the ground clearance of the centre axle.

The FCX24 is equipped with a straight axle by default, but a planetary gear differential option can be used with high-viscosity silicone oil to simulate the effect of a LSD limited-slip differential. After installing the differential, the ultimate climbing ability will be reduced, but a smaller turning radius and a more stable high-speed driving quality can be obtained. Simply put, the straight axle is suitable for extreme climbing, and the differential is suitable for high-speed off-road. The choice is yours.

The two-speed mechanical transmission is operated by a 9g steering gear that can be switched using the third channel on the remote control. The low gear reduction ratio is 99, which is larger than that of similar products currently on the market. The torque output is strong, and easy for extreme climbing. The high gear reduction ratio is 24.75, and the speed is higher than that of all similar products currently on the market. In addition to enjoying the charm of mechanical shifting, the two-speed transmission enables more ways to enjoy your driving experience.

Features

• Daimler-Benz Ag Licensed Product.
• Ready To Run Model.
• Two-Speed Transmission.
• ABS Hard Bod.
• Remote Control Lighting System.
• Portal Axle w/Metal Gear.
• Metal Gears Steering Servo.
• Four Link Suspension.
• High Strength Integrated Nylon Frame.
• Functional Hood.
• Restored Interior Features.
• Painted Body, Three Colors Available.
• Optional Parts: Metal Link Rods, Metal Diff, Metal Universal Joint Drive Shaft, Metal Gears, Brass Wheel Counterweights.

Specifications

Length: 249mm
Width: 153mm
Height: 160mm
Wheelbase: 142mm
Tyre F/R: Φ 20mm
Approach Angle: 49°
Departure Angle: 69°
Ground Clearance: 40mm
Motor: 130 Brushed Motor
Remote Control Distance: 30m

What's Included

• 1 x 1:24 Unimog 421 RTR
• 1 x G3 Transmitter
• 1 x R3A Receiver with ESC Group Control Board (installed)
• 1 x 130 Brushed Motor (installed)
• 1 x 2S Lipo 7.4V 380mAh Battery
• 1 x USB Battery Charger
• 1 x Hex Wrench Socket
• 1 x Product Manual

Need To Complete

• 4 x AAA Batteries for Transmitter

Inspired by the classical Italian ‘Piaggio Ape’ 3-wheel vehicles that are based on a Vespa scooter the X-Rider Flamingo is a unique cute bundle of fun that every R/C fan needs to enjoy.

Featuring a hard ABS moulded cab and entertaining cartoon style ‘bobbing head’ driver figure the Flamingo is available in a choice of three vivid colours. A steel roll bar runs around the outer edge of the chassis to help prevent tipping during hard turns even though you will lift rear wheels and drift! Mounted to a thick 6061 aluminium main chassis the 370 brushed motor, gearbox with heady-duty metal gears and 800mAh battery are all neatly housed under the cab and a special immitation engine block with moulded exhaust.

Multi-line rear suspension with shock absorbers, scale looking retro wheels and a spoiler finish off the Flamingo in style. Ready-to-run with radio, 2-in-1 esc, and USB Charger.

Bellissimo!

Features

• Easy to drive and install
• Sideways cornering performance similar to a drift car
• Suitable for two wheel tilt stunts
• Entertaining head-shaking cartoon drive
• High simulated ABS hard plastic car body
• Thickened 6061 aluminum chassis
• Metal drive gears
• Reinforced metal guard & fibre roll cage
• Simulated radiator & engine
• High performance spoiler
• Multi-link suspension
• Retro truck rim w/ all terrain tyres
• Ready-to-Run
• 2-in-1 ESC/RX
• 32T 370 Brushed Motor
• 8.2V 800mAh NiMH Battery
• Digital Steering Servo
• USB Charger

Specifications

Length: 255mm
Width: 190mm
Height: 180mm
Wheelbase: 175mm

FTX SUPAFORZA GT 1/7 ON ROAD RTR STREET CAR - RED

Length: 700mm LONG!

Ready to run! Just add Battery & Charger.

(Requires 4S or 6S Battery & Charger sold separately)

Get ready to turn heads on the strip and streets with FTX’s brushless powered 1/7th on road 4WD, Superforza GT. Fusing muscle with style, the Superforza is ready to deliver an on-road, street racing experience like never before.

Modelling an aggressively styled scale bodyshell that features moulded scale accessories such as front grill, side mirrors, rear spoiler, head and taillight lenses for realistic LED lighting system and oversized rear tyres, the Superforza GT is ready to live up to its supercar billing.

Under the hood, a Hobbywing 150Amp speed control and 2000kv 4274 4-pole brushless motor are ready to link up with your choice of 4S or 6S LiPo battery power, for some rubber burning street runs. With speed you need control and with channelled chassis side guards and a rear diffuser for ground effects, coupled with Fastrax F-Zero high traction tyres that are internally belted to stop expansion under power, using a wider rear footprint, high speed stability is assured.

A robust, shaft drive, 3-differential drivetrain, featuring heavy-duty steel gears and spiral-tooth diff gears and front universal front CVD driveshafts are ready for you to apply the power. At these speeds it’s impossible to cover everything, but a 3mm thick aluminium chassis, CNC 6061 T6 machined aluminium front and rear towers, aluminium front to back chassis brace and front foam bumper are all designed to help minimise damage in the event of an off or impact.

Looking to fine tune the Superforza’s handling for a faster run or lap time? Then you have the tools as standard with the adjustable aluminium front and rear shock absorbers that include optional spring ratings. Multiple shock absorber positions and front and rear anti-roll bars will help you dial-in your ride in no time. Whilst a 19kg metal geared servo controls the steering, you can also experiment with some sideways drift style action with the integrated, servo operated mechanical diff brake option, for some handbrake turns. Conditions a little slippery? No problem, the Etronix 2.4ghz radio system features a built-in gyro in the receiver to help you keep your Superforza on track. Burn rubber and light up the road with the Superforza GT!

Features

• 99% Ready-to-Run
• 2.4ghz Etronix radio w/gyro programmed RX
• Waterproof 18kg metal geared steering servo
• Hobbywing 150Amp brushless speed control
• 2000kv 4-pole 4274 brushless motor
• Chassis mounted cooling fan for motor
• Integrated mechanical brake option
• CNC Alum. 6061 T6 Front Rear Shock Towers
• CNC Aluminium Centre chassis Brace
• Pivot ball suspension
• Heavy-duty Front CVD driveshafts
• Big bore aluminium-threaded oil filled shocks
• 3mm aluminium chassis
• Moulded chassis side guards & rear diffuser
• Front foam bumper
• 3-differential shaft drive transmission
• Heavy-duty steel gears
• Spiral-tooth diff gears
• Ball bearings
• Belted Intermediate Treaded tyres
• 7-spoke wheels w/wide offset rears
• Supercar inspired body with moulded grill, mirrors, spoiler & light lenses
• Realistic front and rear LED light system

Specifications

Length: 700mm
Width: 350mm
Height: 200mm
Wheelbase: 410mm
Front Tyre: Φ43*100mm
Rear Tyre: Φ53*107mm

Required To Complete

• 4 x AA batteries
• 4S or 6S Lipo battery w/XT90 connector
• Lipo Charger

FTX EVO30 1:10 BRUSHLESS STREET RTR CAR - RED

It might be 4WD, but the EVO30 captures the essence of the legendary RWD supercars of the 80’s in all their glory.

Choose either the car park for sideways drift or hit the throttle for some speed runs by choosing either hard drift tyres or sticky soft treaded rubber tyres included with the EVO30.

With a wide aero inspired wide moulded main chassis featuring no screw heads, this smooth finish, coupled with a rear diffuser provides stability at speed. Shaft driven with sealed, geared front and rear differentials feature metal gears throughout for maximum durability. The modular radio tray neatly houses a 15kg Etronix metal geared steering servo and Hobbywing brushless 60A esc while the 3300KV brushless motor powered by a Voltz 2S 2500mAH Lipo battery delivers impressive straightline speed.

What’s more you can adjust the gyro enabled receiver to help fine tune your drifting and opposite lock handling at speed.
Oil filled shock absorbers, anti-roll bars and adjustable double wishbone suspension lets you tweak to suit your settings and tyre choice; either treaded rubber tyres for street racing, featuring 25mm wide front and 30mm wide rear for better stability at high speed or hard plastic boots on 6-spoke wheels for sideways drift driving.

Topped off with classic ‘80s body styling, that features a detailed moulded front grill with light lenses along with a front and rear multifunction LED light set, you just need to hit the power EVO30 style!

Features

• 99% Ready-to-run
• FTX 2.4ghz 5ch Radio System
• Etronix 3652 KV3300 Brushless Motor
• Hobbywing 60A Brushless Speed Control
• Etronix Waterproof 15kg MG Steering Servo
• Voltz 2S 30C 2500mAH LiPo Battery
• Etronix LiPo Balance Charger
• Gyro Stability Control Option
• Multifunction LED Light Box Control
• Scale finished body w/moulded accessories
• Front and Rear Anti-Roll Bars Included Rubber Street & Hard Slick Drift tyre sets i
• Front & Rear Metal Gear Sealed Differential
• Shaft driven 4WD
• Front CVD Universal Driveshafts
• Ball Bearings
• Adjustable Oil Filled Shock Absorbers
• Rear Moulded Diffuser Bumper
• Moulded wide main chassis featuring screwless base
• Quick Release Battery Holder

Specifications

Length: 438mm
Width: 200mm
Height: 130mm
Wheelbase: 260mm

Required to complete

• 4 x AA Batteries

FTX EVO30 1/10 BRUSHED STREET CAR RTR - BLACK

READY TO RUN

It might be 4WD, but the EVO30 captures the essence of the legendary RWD supercars of the 80’s in all their glory.

Choose either the car park for sideways drift or hit the throttle for some speed runs by choosing either hard drift tyres or sticky soft treaded rubber tyres included with the EVO30.

With a wide aero inspired wide moulded main chassis featuring no screw heads, this smooth finish, coupled with a rear diffuser provides stability at speed. Shaft driven with sealed, geared front and rear differentials feature metal gears throughout for maximum durability. The modular radio tray neatly houses a 9kg Etronix metal geared steering servo, Hobbywing brushed WP1040 esc, 17T 550 brushed motor all powered by a Voltz 2000mAH Ni-MH battery making it the perfect choice for entry level users.

Oil filled shock absorbers, anti-roll bars and adjustable double wishbone suspension lets you tweak to suit your settings and tyre choice; either treaded rubber tyres for street racing, featuring 25mm wide front and 30mm wide rear for better stability at high speed or hard plastic boots on 6-spoke wheels for sideways drift driving.

Topped off with classic ‘80s body styling, that features a detailed moulded front grill with light lenses along with a front and rear multifunction LED light set.

Hit the throttle and burn rubber with the FTX EVO30!

Features

• 99% Ready-to-run
• Etronix 2.4ghz 5ch Radio System
• Hobbywing WP1040 Brushed Speed Control
• 17T 550 Sized Brushed Motor
• Voltz 2000mAH Ni-Mh Battery Pack
• Etronix Waterproof 9kg Metal Geared Servo
• USB Charger
• Multifunction LED Light Box Control
• Scale finished body w/moulded accessories
• Front and Rear Anti-Roll Bars Included
• Rubber Street and Hard Slick Drift tyre sets
• Front & Rear Metal Gear Sealed Differential
• Front CVD Universal Driveshafts
• Ball Bearings Throughout
• Adjustable Oil Filled Shock Absorbers
• Rear Moulded Diffuser Bumper
• Quick Release Battery Holder

Specifications

Length: 438mm
Width: 200mm
Height: 130mm
Wheelbase: 260mm

Required to complete

• 4 x AA Batteries

FTX APACHE 1/10 BRUSHLESS TROPHY TRUCK RTR - BLUE

Trophy trucks provide the perfect blend of off-road capabilities with drivability for brilliant all-round r/c ex-perience. The FTX Apache a perfect example of this utilising a high ground clearance moulded tub chassis, aluminium skid plates and moulded scale front and rear bumpers, coupled with long throw suspension, marshalled by blue anodised aluminium oil filled shocks on each corner.

Power to the sealed, shaft driven 4wd system is supplied by a Voltz 3S Lipo battery, Hobbywing 50A speed control and brushless 2500kv motor for some exhilarating high-speed off-road fun.

Pivot ball suspension with adjustable turnbuckles, provides tunabilty should you wish and front CVA driveshafts and metal geared differentials front and rear provide reliable service.

On top, the stylish semi-scale Trophy Truck Apache body features impactful graphics resulting in an eye-catching vehicle in either blue and red, topped off with moulded roof skid rails, roof LED light bar and rub-ber front mud flap.

Wrapping up the Apache are aggressive block pattern soft race tyres mounted on scale styled black 8-Spoke wheels. All that’s left is for you to roll to the start line, wait for the flag to drop and it the start button!

Features

• 99% Ready-to-run
• Etronix 2.4ghz Radio System
• Etronix 3652 KV2500 Brushless Motor
• Hobbywing 50A Brushless Speed Control
• Etronix Waterproof 6kg Steering Servo
• Voltz 3S 30C 3500mAH LiPo Battery
• Etronix LiPo Balance Charger
• High Ground Clearance Composite Tub Main Chassis
• Front & Rear Aluminium Chassis Skid Plates
• Shock Absorbing Front & Rear Bumpers
• Pivot Ball Front Suspension
• Aluminium Oil Fill Shock Absorbers
• Adjustable Suspension Turnbuckles
• Full Ball Bearings
• Receiver Box
• Sealed Drivetrain with Slipper Unit
• Alloy Hinge pin Braces
• Metal Bevel Geared Differentials
• Front Universal CVA Driveshafts
• LED Roof Lightbar
• Stylish Impact Printed Body Graphics
• Moulded Roof Bar Rails

Specifications

Length: 600mm
Width: 300mm
Height: 220mm
Wheelbase: 328mm
Tyre: ø 110 x 58mm

REQUIRES AA BATTERIES FOR HANDSET

FTX OUTBACK 3.0 PASO RTR 1:10 TRAIL CRAWLER - BLUE

READY TO RUN

The evolution of the Outback platform continues with the release of the Outback 3 Paso. Using hidden body mounts the detailed bodyshell features multiple moulded scale accessories such as integrated front grill with ‘angel eyes’ headlights, moulded scale bumpers, PVC roof cover and roof rack, functional spare tyre and tools, mirrors, snorkal and more the Paso is just itching to be taken out on adventure.

Underneath the Outback 3 uses Etronix’s new System 3 waterproof ESC/ RX/LED intelligent light smart controller providing a wide array of different lighting options along with aftermarket plug-in roof lights.

A powerful Etronix 6kg rated waterproof steering servo, along with an improved 45° steering angle, paired with adjustable front caster angle provides exceptional manoeuvrability in tight spaces. The 1500mAh battery has been moved forward for improved stability, while the oill filled shock absorbers now featured threaded bodies for fine tuning adjustment.

Updated locked front and rear axles feature a scale removable cover for access the metal drive spool and crown gear, while side chassis rock sliders help those annoying snags.

With scale tread 1.9”supersoft tyres mounted to beadlock wheels, finished off withchrome nut dust covers the Paso is all set and ready for you to explore new paths.

Features

• 99% Ready-to-Run
• Etronix 4ch 2.4ghz radio system
• Etronix System3 Waterproof ESC/RX/LED Smart Controller
• Etronix 6kg waterproof servo
• 390 brushed 25 Turn motor
• 7.2v 1500mah NiMH battery & USB charger
• Ball bearings
• Steel twin rail metal frame chassis
• 6mm steel multi-link suspension for smooth articulation
• Telescopic centre universal driveshafts
• Steel CVA front universal driveshafts
• Oil filled shock absorbers
• Reinforced integrated locked axles with removable cover
• Improved 45° angle steering
• Metal drive spool and crown gear
• 1.9: Beadlock wheels with chrome nut dust cover
• Forward mounted battery tray
• Moulded grill, bumpers, light buckets, wipers, snorkel, tools
• Functional spare tyre and beadlock wheel
• PVC Roof cover and roof rack
• Intelligent LED headlights
• Hidden body post mounting for smooth scale appearance

Specification

Length: 465mm
Width: 215mm
Height: 230mm
Weight: 1940g
Wheelbase: 255mm
Gear Ratio: 88.1
Tyre Diameter: 102mm
Wheel Diameter: 54mm
Ground Clearance: 68mm

Required to complete

• 4 x AA batteries

FTX OUTBACK CENTAUR 4X4 RTR 1:10 TRAIL CRAWLER - BLUE

Ready to run!

Tackle the trails with the Centaur, the latest all-terrain ready-to-run vehicle from FTX, blending the latest design features and finish.

The highly detailed semi-scale bodyshell is finish with a two-way paint of matt black roof and wheel arches, paired with a gloss main section.
Moulded scale grill, light buckets, mirrors, handles and wipers complete the exterior along with a moulded interior.

Moulded inner fenders fill each wheel well, while oil filled, adjustable aluminium shock absorbers provide exceptional rough track handling.

The scale front bumper accommodates a winch cable and hook protected by a stamped aluminium lower skid plate. The cable can be extended up to 90cm via a 25kg MG 360° winch servo.

Multi-function front and rear LED lights are factory installed, connecting seamlessly to the vehicle via a magnetic connector for hassle free body removal along with the Centaur’s hidden clipless mounts.

Under the hood, the Centaur boasts several features that seasoned trail fans will like such as a servo operated two-speed gearbox and DIG system. Flip between high and low drive gears and engage/disengage the locked rear axle function with the DIG function all with the press of a TX button.

With a waterproof 25kg metal geared steering servo with metal arm, 35T 550 brushed motor and Hobbywing WP-1060 Speed control all installed as standard the Centaur is ready to take your trail adventure to the next level.

Features

• 99% Ready-To-Run
• 6-Channel 2.4ghz Rdio System
• Hobbywing WP-1060/60A Speed Control
• 35t 550 Brushed Motor
• Voltz 2000mah 7.2v Nimh Battery
• Etronix USB Charger
• 25kg Metal Geared Waterproof Steering Servo
• 25kg Metal Geared Waterproof 360° Winch Servo
• Front Stainless Steel Bumper Skid Plate
• CNC Aluminium Bumper Winch Mount
• Servo Operated High-Low 2-Speed Function
• Servo Operated Dig Locking Rear Axle Function
• Front And Rear Cnc Steel Spiral Gears
• Front Steel Cvd Universal Driveshafts
• Centre Steel Telescopic Transmission Driveshafts
• Hardened Stainless Steel Chassis Rails
• 46° Steering Angle
• CNC Aluminium Oil Filled Shock Absorbers
• Side Chassis Plates & Inner Wheel Fender Arches
• 110mm Diameter Butyl Rubber Tyres
• Detailed Bodyshell With Moulded Scale Features
• Detailed Interior Set
• Multi-Function Front And Rear Led Lighting With Magnetic Connector

Specification

Length: 512mm
Width: 240mm
Height: 241mm
Weight: 3030g (no battery)
Wheelbase: 313mm
Gear Ratio Low: 53:1 (F), 57:1 (R)
Gear Ratio High: 28:1 (F), 30:1 (R)
Tyre Diameter: 110mm
Wheel Diameter: 50mm
Ground Clearance: 35mm (Links) 73mm Chassis

FTX KANYON 4X4 MOUNTAIN RESCUE VEHICLE 2-SPEED READY TO RUN 1:10 XL CRAWLER

Brushed! (Requires 4X AA Batteries for Handset)

Radio set shown may vary*

Mountain Rescue teams around the world risk life and limb to help others. Whether it’s in the mountains of the UK such as Snowdonia, Brecon or the Scottish Highlands or trails in the Alps and Pyrenees these predominantly volunteer teams are ready for a distress call for help.

FTX’s new Mountain Rescue edition Kanyon looks to capture the go anywhere mindset of rescue teams by including some new features over the standard Kanyon. A switchable 2-speed gearbox provides high and low speeds to help navigate rough and smooth terrain, whilst a front bumper mounted winch can be operated from the transmitter to haul you out of trouble.

The iconic Kanyon body comes finished in a new mountain rescue inspired livery and a radio antenna is included for when you must contact base camp on the walkie-talkie.

A 35T brushed motor provides the torque, while the same metal output gears, locked axles and multi-link suspension produce the drive you need to pretty much scale over most obstacles.

With a moulded roof rack ready for you to load with scale rescue accessories, you don’t need to waste too much time before you are ready for your first emergency call out!

Features

• 99% Ready-To-Run
• Etronix 2.4ghz radio
• Etronix 9Kg waterproof steering servo
• 60Amp Waterproof brushed crawler ESC
• 35T High torque brushed motor
• Voltz 1800mAh NiMH 7.2v Battery
• USB 600mA charger
• Receiver box
• Switchable 2-speed gearbox
• Front and rear straight locked axles
• Link suspension for maximum articulation
• Telescopic sliding centre driveshafts
• Front CVA steering universal driveshafts
• Centre compact 3-gear transmission
• Front, centre & rear diff lockers
• Metal output, crown and diff gears
• Oil filled adjustable shock absorbers
• Aluminium front/rear bumper & body mounts
• Scale inspired rescue style bodyshell
• Moulded fenders, roof rack & light bar
• Front and rear moulded bumpers
• Working front bumper winch
• Scale styled wheels w/super soft block tyres
• 13 Factory fitted LED lights

Specifications

Length: 560mm
Width: 305 mm
Height: 287mm
Wheelbase: 340mm

Upsize your trail experience with the Kanyon from FTX. This XL sized 1:10 scale vehicle is perfect for tackling any adventure you throw at it over varied terrain. Multi-link suspension featuring adjustable oil filled shock absorbers, provide excellent articulation to help you manage the rough stuff.

The FTX Kanyon is the perfect choice for first time modeller’s simply after some outdoor fun!

Wheel and Tyres

Supersoft aggressive lug pattern tyres are mounted to scale style wheels for a realistic finish. With a blend of semi-scale looks, reliable chassis platform and over 10% bigger size than most trail crawlers.

Body

The Kanyon’s off road inspired semi-scale bodyshell features a number of additional moulded accessories such as wheel arches, luggage tray, roll cage, front grill and head, tail, spotlights. The aluminium front and rear bumper and body mounts provide a wide selection of optional positioning for possible aftermarket options and to wrap things up 13 factory installed LED lamps provide the necessary illumination for you to keep your rig on the trail long after the sun goes down.

Transmission and Motor

The high torque 60T brushed motor drives a rugged, all metal output pinion, crown and transmission gears for extra reliability. Front universal CVA driveshafts and centre telescopic sliding shafts keep the power connected to all wheels through high clearance front and rear locked axles.

Shock Absorbers

Oil filled, threaded body shocks handle each corner and the huge axle articulation.

Servo

Due to the demands of crawling, FTX have chosen to include an Etronix 9kg steering servo to help navigate your Kanyon through the roughest of terrains.

FTX OUTBACK FURY XC RTR 1:16 TRAIL CRAWLER - YELLOW

Brushed

Fans of the 1:16 scale Ranger, can now add the Fury XC to their collection! Measuring 32cm long, the Outback Fury XC is small enough to be used indoors, yet large enough to be capable of taking on larger outdoor terrain.

Available in white, blue and yellow the Fury XC features moulded bodyshell accessories and hidden body post mounts for additional detail. Underneath, the XC chassis features a metal geared reduction gearbox for improved torque and low speed driving, low C of G centre drive with telescopic sliding driveshafts, metal axle gears in high clearance locked axles and front and rear oil filled shock absorbers.

The waterproof Hobbywing 25Amp speed control coupled with the reduction gearbox provides perfect slow control and torque for you to creep your way through the trails.

With the factory installed multi-mode LED light set front and rear, whether you are Indoor or out, night or day the Fury XC is ready to tackle anything!

Features

• 99% Ready-To-Run
• 2.4ghz 4ch Radio System
• Waterproof 17g Steering Servo
• Hobbywing Waterproof 25Amp Speed Control
• 7.2V 1100mAh NiMH Battery Pack
• High Torque 370 size brushed motor
• Centre mounted low CofG motor & gearbox
• Metal geared reduction gearbox for up to 40° angle climbing performance
• Oil filled shock absorbers
• Multi-mode LED light set front and rear
• Mult-link suspension system
• Locked front and rear axles with metal drive
• Telescopic UJ centre driveshafts
• Scale inspired 4x4 Off Road body w/hidden mount
• Scale inspired wheels & supersoft crawling tyres

Please Note: This kit is sold in RTR (Ready-to-run) format but requires AA Batteries to Complete to power the Handset.

FTX RAVINE 1:10 RTR M.O.A. ROCK BUGGY CRAWLER

BRUSHED! 

The Ravine is ready navigate the tightest and steepest terrain you can throw at it with it’s multi M.O.A. axle design and multiple steering modes.

Inspired by full sized caged crawlers, the Ravine features and M.O.A. (motor over axle) design for a lower centre of gravity and more control front and rear. In addition the Ravine’s is fitted with steering servos both front and rear for a full array of different steering options. These steer-ing options can be easily switched while on the move via the transmitter providing you with instant help when navigating the trail. Stuck in a tight spot? Switch to the 4-Wheel-steering option for a tighter turning circle at low speed or at high speed or on softer surfaces change direction with the crab model. The options are limitless for you to explore all kinds of terrain with the Ravine.

Multi-link suspension matched with oil filled shocks provides huge articulation for you carve your way through the rocks. Supersoft, heavy lugged 2.2” tyres mounted on beadlock wheels pro-vide the traction and bite for you to apply the power.

Topped off with a tubu-lar rollcaged body and interior set, the FTX Ravine is ready for you to go climbing!

Features

• 2.4ghz radio system
• Switchable steering modes
• M.O.A. (Motor-on-axle) design
• 4-wheel drive & 4-wheel steering
• Two 6kg rated steering servos
• Two 380 sized motors
• Li-Ion 2S 7.4V 1500mAh battery
• USB Balance charger
• Ball bearings
• Oil filled shock absorbers
• Front & rear 4-link suspension
• Scale inspired roll cage crawler frame, panels & cockpit
• TVP chassis design
• Beadloc wheels
• Aggressive pattern all terrain tyres

Specifications

Length: 440mm
Width: 230mm
Height: 275mm
Weight: 1750g
Wheelbase: 320mm
Gear Ratio: 1:40.25
Tyre Diameter: 130mm
Wheel Diameter: 63mm
Ground Clearance: 45mm

Please Note: This kit is sold in RTR (Ready-to-run) format but requires 3 x AA batteries for completion.

FTX CROSSBOW 1/10 BRUSHLESS TRUGGY TRUCK RTR - BLUE

Looking to hit the bullseye with an amazing value, high performance 1/10 Truggy then look no further than the FTX Crossbow. Brimming with proven features already rolled out on established models such as the Ramraider and Apache, the Crossbow is sure to be a hit with fans of high-speed brushless powered off-road bashing.

The chassis has been updated to provide more space for different sized LiPo batteries, aside from the included Voltz 3S 3500mAh and has updated aluminium skid plates for improved protection. Hobbywing, the leader in brushless technology cover speed control and motor duties with a 60A esc and 3652 KV2500 motor.

Long throw, double wishbone suspension with pivot ball front set-up, feature reinforced lower arms for less flex, while aluminium adjustable, oil filled big bore shock absorbers, finished in stylish blue are ready for what awaits on each corner.

A ballraced, sealed drivetrain with slipper unit along with metal diff gears with front universal driveshafts are ready to take care of the power when you hit the gas. New, sturdy front and rear towers with a full-length brace bar provide extra rigidity, while the heavy-duty rear spoiler maintains traction and stability at speed. Topping things off is the Crossbow’s aggressively styled, low slung bodyshell complete with roof light bar, roof skid rails and mounting point reinforcement plates.

Take your off-road R/C experience to new heights with the FTX Crossbow!

Features

• 99% Ready-to-run
• Etronix 2.4ghz Radio System
• Etronix 3652 KV2500 Brushless Motor
• Hobbywing 60A Brushless Speed Control
• Etronix Waterproof 6kg Digital Steering Servo
• Voltz 3S 30C 3500mAH LiPo Battery
• Etronix LiPo Balance Charger
• High Ground Clearance Composite Tub Main Chassis
• Front & Rear 6061 T6 Aluminium Chassis Skid Plates
• Pivot Ball Front Suspension
• Aluminium Oil Filled Shock Absorbers
• Adjustable Suspension Turnbuckles
• Full Ball Bearings
• Receiver Box
• Sealed Drivetrain with Slipper Unit
• Alloy Hinge pin Braces
• Metal Bevel Geared Differentials
• Front Universal CVA Driveshafts
• Reinforced Lower Suspension Arms
• Aluminium Centre Chassis Brace
• LED Roof Lightbar
• Moulded Body Mounting Braces
• Stylish Impact Printed Body Graphics
• Moulded Roof Bar Rails

Specification

Length: 565mm
Width: 300mm
Height: 220mm
Wheelbase: 328mm
Tyre: ø 125 x 70mm

Required to complete

• 4 x AA Batteries

FTX CARNAGE 2.0 1/10 BRUSHLESS TRUCK 4WD RTR WITH LIPO BATTERY & CHARGER

A long-standing favourite within the FTX range, the Carnage Brushless 2.0 is an ideal start up into lipo powered, brushless motor off road fun!

Featuring new body graphics, the 2.0 now comes standard with an updated Etronix Photon 50A brushless speed control providing improved feel and control. The latest 4ch Etronix Pulse radio with antenna less receiver is now mounted as standard. The same Photon 2950kv brushless motor and Voltz 2S 3250mAh Lipo battery complete the power package.

A new, updated front bumper with six mounted LED lights also provides additional strength and bracing to the front of the chassis. Big bore oil filled shock absorbers and double wishbone suspension look after each corner, while front and rear differentials with metal bevel, crown and pinion output gears handle the brushless power.

Furthermore, this all round package can be upgraded with a wide selection of aftermarket option parts to bring your ride to the next level!

Features

• 99% Ready-to-run
• Etronix Pulse 4ch 2.4ghz Radio System
• Etronix Photon KV2950 Brushless Motor
• Etronix Photon 3.0 50A Brushless Speed Control
• Etronix Waterproof 3kg Steering Servo
• Etronix LiPo Balance Charger
• Voltz 2S 30C 3250mAH LiPo Battery
• Voltz LiPo Charge Sack
• Big bore oil filled adjustable shock absorbers
• Gearbox metal crown & pinion gear
• Front and rear geared differentials
• Front universal CVA driveshafts
• Adjustable turnbuckles
• Fully adjustable suspension including, droop, camber, toe-in, wheelbase etc
• Slipper for drivetrain damage protection
• Moulded tub chassis
• 4wd shaft drive
• Unique gearbox design for low CG
• Lightweight high impact arms
• Wide range of option parts available

Specifications

Length: 415mm
Width: 328mm
Height: 156mm
Wheelbase: 290/295mm
Tyre: ø 120 x 60mm
Gear Ratio: 11.2:1

FTX OUTLAW 1/10 BRUSHED 4WD ULTRA-4 RTR BUGGY

(Radio may differ from shown)

FTX HOOLIGAN JNR 1/28TH RTR RALLY CAR - ORANGE

Wait for the lights to drop and then floor it to the first corner. Just keep your eyes out for the red, green and orange Hooligan Jnr’s behind you! If you are stuck for space then why not re-create some rallycross action indoors or on the drive with the new FTX Hooligan Jnr. They might be small but they pack a mean punch featuring a real styled RC controller with trim adjustment for fine tuning and proportional control. A steering gyro helps provide smooth and easy driving characteristics. The sprung rear rocker arm and front springs provide some small suspension for uneven surfaces.

Available in a choice of four pre-printed bodyshell styles the Hooligan Jnr is great for some family fun!

Features

• 2.4ghz Real RC Radio w/trim adjustment
• USB Charger
• Removable 3.7V 170mAh LiPo Battery
• Printed rally bodyshell in four colours
• Sprung rear rocker arm
• Independent sprung front suspension
• Radial tread rubber tyres
• Steering gyro for smooth & easy handling

Specifications

Length: 149mm
Width: 86 mm
Height: 61mm
Wheelbase: 87.5mm
Tires: 33.5 x 15mm
Weight: 90g

Now driving R/C is even more fun Newly designed FZ02L chassis with realistic racing car body

For the pure enjoyment of R/C car driving, the combination of a beautifully reproduced car body with the FAZER series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance to a new level. A simplified design with fewer parts has improved maintenance efficiency and reduced weight while core strength and rigidity has been increased through new materials and ribbing and stiffeners on front and rear. In addition, the symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, irrespective of power source. Featuring slipper clutch, front & rear gear differentials, oil shocks and full ball bearing specs, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 274mm by replacing some parts (sold separately) for compatibility with other 1/10 scale body styles, in addition the body included. The Readyset package comes fully assembled and includes everything except charger and battery for the chassis, and batteries for the transmitter.

- “Ultra Scale Body” replicates the fine details of the actual body of the car. Kyosho took a step further in scale realism.
- New design shaft drive full-time 4WD touring chassis（FZ02）.
- Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter, and battery with charger for the chassis.
- Equipped with 2-bevel grease-filled gear diffs on front and rear.
- Large size dog bones and cup joints realize superior reliability and durability.
- Belt mounting battery compartment allows various battery types to be used.
- Full ball bearings that reduce drive loss equipped throughout the drive system.
- Features KS202W waterproof steering servo.
- Includes completely finished body with color scheme and decals applied.
- Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces.
- Performance can be further enhanced by installing various optional parts.

Completely new chassis realizes low center of gravity with its simple, functional design. Featuring an integrated gearbox that optimizes torsional rigidity of the main chassis, the nylon material reduces weight while improving impact resistance. Each key component has been reinforced in this simple design without upper deck.

Features a reduced number and variety of screws and parts, and consolidation of frequently used screws into the same size. Most screws are flat head screws that can be removed with a 2.0mm hex wrench for easy disassembly.

Handling factors such as bump steer and scrub radius are optimized on front suspension. Simple ball-connected steering knuckle promises reliable control movement. Interchangeable on both front and rear left-right hub carriers optimize spare parts utilization and improve maintenance efficiency.

Includes choice of two offset brake disc wheel hubs with dummy calipers (for visual styling) that provide compatibility with 190mm and 200mm body widths.

Oil shocks mark an evolutionary step up from previous models Oil shock is newly designed. Optimal front-rear geometry and balance simultaneously delivers both light handling and precise control.

Standard spur and pinion gear setting is 68T and 32T, but 9 pinion gear settings can be used from 29T – 37T to produce a wide range of gear ratio settings. The new fixed gear mesh motor mount has holes for use with each different pinion gears. Just simply mount the motor directly to the hole locations corresponding to the pinion gear. No gear mesh adjustment is necessary.

Embodying the true essence of the American Muscle car age, the Dodge Charger featured in many popular TV shows and movies. This 1/10 scale recreation featuring a 2-door hardtop semi-fastback body with its distinctive coke-bottle lines and concealed headlights captures the unique Dodge Charger identity.

New design Vintage Touring Car (VTC) tires & Rostyle type wheels to match vintage car style.

Comes with the new powerful 550 size 14T brushed motor(G14L). The long can with Steel ring around the motor case and internal cooling fan provides efficient torque and high speeds.

Features

Drivetrain

The R3 Single Speed Transmission comes with a tough cast metal case, wider gears for durability and a Delrin Spur with Slipper Clutch for performance. It also features a sturdy billet aluminium motor mount for added toughness.

The Trail Finder 2 includes the Hammer Transfer Case that features a cast metal exterior and heavy-duty .8 Mod Widened Gears, ensuring lasting functionality.

Drawing on the success of the RC4WD MOA Gear Sets, the Trail Finder 2 has the most durable gears RC4WD has to offer, capable of staying on the trail day after day.

The most scale-accurate axles on the market, the K44 Ultimate Scale Cast Axles feature high steer knuckles, XVDs, lower mounting points, and a compact offset front pumpkin.

The driveshafts on the Trail Finder 2 feature heavy-duty uni-joint metal shafts for great driveline angles and durability on the trail.

Suspension

The Trail Finder 2 has a multi-purpose, molded fuel cell that serves as an electronics storage box and provides additional RC realism by storing away any protruding wires.

The Trail Finder 2 includes Scale 70mm and 80mm White Shocks with Internal Springs. These ultimate scale shock absorbers offer realistic looks and ultimate performance. They are machined from billet aluminium with internal springs and are customizable.

With strength in mind, the ladder frame design of the Trail Finder 2 is made with CNC machined, billet aluminium and comes with scale shock hoops, a chassis servo mount, and transmission and transfer case mounts.

The Scale Dept. Edition includes a set of rugged 8 Lug Deep Dish Wagon Wheels. These 1.9" Chrome-Plated wheels are formed with stamped steel and are finished off with Scale Wheel Hubs.

Every RTR needs a tough set of tyres to hit the trails and the included RC4WD Dick Cepek Fun Country 1.9" Scale Tyres deliver the perfect amount of traction with its advanced X2S3 compound. The scale details complete the look in just the right size.

Details

The Chevrolet K10 Scottsdale features exquisite scale details, including door handles, updated mirrors, new rear step bumper and the new front grille. It also has a complete molded plastic engine bay that comes painted with decals installed for an extremely scale appearance.

The Chevrolet K10 Scottsdale Hard Body is constructed of durable hard plastic with a classic shape that replicates the full-size model with accuracy and authenticity.

The Chevrolet K10 Scottsdale Hard Body features a molded, realistic drop bed and an opening hood and tailgate. The masters of scale are unmatched when it comes to details.

The Chevrolet K10 Scottsdale Hard Body set includes an improved dashboard with preinstalled, super-scale interior decals and door panels.

Straight out of the box, an LED light set comes professionally installed and concealed, keeping that realistic look. Included are chrome-plated parts and coloured lenses for that scale look! Now including the old school halogen headlights.

Electronics

The Trail Finder 2 includes a high-quality XR3 3 Channel 2.4Ghz Radio System. Expanding user experience, this radio system comes with a total of three radio channels!

The Trail Finder 2 is powered by the RC4WD 45 Turn Crawler Motor. With its sealed end bell for increased durability and long lasting performance, you're sure to get where you're going!

Included is the popular RC4WD Outcry III Waterproof ESC Brushed Speed Controller, with built-in drag brake, for reliable constant power on demand at any time!

With a massive 277.6oz@6V of torque and a full metal geared drivetrain, the RC4WD Twister Metal Gear Digital Servo has the power and performance needed to outmaneuver and overcome tough terrain.

It's all in the box! Everything you need is provided to get you on the trails today!

More Features

• Chevrolet K10 Scottsdale Hard Body.
• Small Block V8 Engine Bay W/ Dress Up Kit.
• Halogen Style Lights (retro Look).
• Chrome Front Grille For Chevrolet Blazer And K10 (80's).
• Chrome Single Tube Roll Bar And Front Push Bar.
• Chrome Rear Step Bumper.
• 8 Lug Chrome Deep Dish Wagon 1.9" Steel Stamped Beadlock Wheels.
• Dick Cepek Fun Country 1.9" Scale Tyres. 
• K44 Ultimate Scale Cast Axles (XVD).
• X-Ring Scale Shock Absorbers 70/80mm.
• Front Inner Fenders.
• Twister High Torque Metal Gear Digital Servo.
• 45T 540 Brushed Crawler Motor.
• R3 Single Speed Transmission.
• Center Mounted Hammer Transfer Case.
• Chrome Side Steps.
• Outcry III Waterproof ESC.
• 6-Cell 3000mAh NIMH Battery Pack.

Specifications

Hammer Transfer Case
Ratio: 1.47:1
Gears: Wide .8 Mod Hardened Steel Gears 
Features: 8 Bearings, Cast Casing, Hardened Gears

R3 Scale Single Speed Transmission
Ratios: Pinion/Spur 14/64 = 4.57:1 
Internal Ratio: 1.78:1
Gears: Wide Steel .8 Mod, Delrin Spur, Slipper Clutch

K44 Ultimate Scale Cast Axles
Ratio: 2.67:1
Hex To Hex Width: 177mm (6.96")

Shock Absorbers
X-ring Scale Shock Absorbers 70/80mm

Wheels
Type: RC4WD 8 Lug Deep Dish Wagon 1.9" Steel Stamped Beadlock Wheels (Chrome)
Fits Standard: 12mm Hex
Width: 1.26in / 32.0mm
OD: 2.08in / 53.0mm

Tyres
Type: RC4WD Dick Cepek Fun Country 1.9" Scale Tyres
Outer Diameter: 3.94in / 100mm
Width: 1.52in / 38.8mm
Inner Diameter: 1.81in /46.0mm

TF2 Truck Dimensions
Wheelbase: 312.0mm(12.3") 
Width: 220.0mm(8.7")
Height: 251.0mm(9.9")
Ground Clearance: 62.0mm(2.4") 
Final Drive Ratio: 31.9:1

What's Included

• 1 x RC4WD Trail Finder 2 "LWB" RTR W/ Chevrolet K10 Scottsdale Hard Body Set (Scale Dept. Edition)

Notes

• Please note that these truck bodies are hand-painted, so minor blemishes, differences, or imperfections may occur.
• While some components may come assembled, we always recommend that you check the products to ensure all hardware is tight. In some cases, you may want to apply thread lock to some of the hardware that is already installed.
• Use good quality hex drivers to avoid stripping screw heads.
• Use thread lock when putting metal screws into metal parts.
• Use thread lock sparingly.
• Do not over tighten screws, otherwise you may strip the thread.

Features

• 2015 Land Rover Defender D90 Body Set
• Basic Lighting System
• TDI Engine Bay
• Landies Vintage 1.9" Stamped Steel Beadlock Wheels
• Dick Cepek 1.9" Mud Country Scale Tires
• Yota II Ultimate Scale Cast Axle V2 (XVD)
• Dual Spring Scale Black Shocks 80mm V3
• Inner Fender Set 
• 540 Crawler Brushed Motor 45T
• R3 Single Speed Transmission
• Center Mounted Hammer Transfer Case
• Twister High Torque Metal Gear Digital Servo
• Outcry III Waterproof ESC
• 6-Cell 3000mAh NIMH Battery W/ XT60 Plug
• Universal NIMH Peak Battery Charger
• XR3 3-Channel 2.4Ghz Transmitter/Receiver Radio
• Exclusive Decal Sheet

Drivetrain

The R3 Single Speed Transmission comes with a tough cast metal case and wider gears for durability and a Delrin Spur with Slipper Clutch for performance. It also features a sturdy billet aluminum motor mount for added toughness.

The Gelande II includes the new Hammer Transfer Case. Packed with scale detail, the Hammer features a cast metal exterior and heavy-duty .8 Mod widened gears for durability.

Drawing on the success of the RC4WD MOA Gear Sets, the Gelande II drivetrain has the most durable gears RC4WD has to offer, capable of staying on the trail day after day.

The most scale-accurate axles on the market, the RC4WD Yota II Ultimate Scale Cast Axles V2 (XVD) feature innovative 8-degree round knuckles, unique removable diff covers, lower mounting points, and a compact offset pumpkin in the front.

The driveshafts on the Gelande II Chassis feature heavy-duty uni-joint metal shafts for great driveline angles and durability on the trail.

Suspension

The Gelande II Chassis features a molded fuel cell that doubles as an electronics storage box plus an aluminum, frame-mounted under-cab electronics tray for multiple electronics mounting options. Also includes a sturdy battery tray with strap mounts.

The Gelande II boasts realistic-looking, high -performance X-ring technology Dual Spring Shocks. These rebuildable aluminum shocks feature dual springs and Titanium Nitride coated shafts for superior, long-lasting impact control.

The Gelande II Chassis is a machined billet aluminum ladder frame with an all-link suspension design, scale shock hoops, chassis servo mounts, and hard body mounting points for the ultimate in strength.

The Gelande II Included are a set of 5 Lug Wagon Landies Vintage 1.9" Stamped Steel Beadlock Wheels! The wheels are made from stamped steel and have a smooth black finish for added detail.

This Gelande II comes with a set of Dick Cepek 1.9" Mud Country Scale Tires that deliver the perfect amount of traction with its advanced X3 soft and sticky compound. The scale details complete the look in just the right size.

Electronics

The Gelande II includes a high quality XR3 3 Channel 2.4Ghz Radio System. Use the third channel to control a winch and add even more fun to your scale adventure.

The Gelande II is powered by the RC4WD 45 Turn Crawler Motor. With its sealed end bell for increased durability and long lasting performance, you're sure to get where you're going!

The Gelande II features the popular RC4WD Outcry IIl Brushed Speed Controller with built-in drag brake for reliable, constant power on demand. Anytime.

A great truck needs a great servo to get you out of those tough spots and the Gelande II features the Twister. A high torque metal gear digital servo to handle all your steering duties.

It's ALL in the box! Everything you need is provided to get you on the trails today!

Details

The Gelande II features the 2015 Land Rover Defender D90 Body Set, which comes with an awesome assortment of scale details including mirrors, door handles, vents and grille to match the 1:1 vehicle. It also has a complete molded plastic engine bay that comes painted with decals installed for an extremely scale appearance.

Officially licensed by Land Rover, the 2015 Land Rover Defender D90 Body Set is the most scale replica on the market, featuring opening doors, a rear tailgate, and a hood.

The Gelande II features the 2015 Land Rover Defender D90 Body Set, which comes in gloss grey paint, decals, a pre-installed lighting system, and a fully molded interior!

The body features a full detailed interior, seats, opening center console, plastic and rubber mirrors and a detailed dashboard. It's all here to bring your scale experience to a new level.

The body features many intricate details and is almost unmistakable from its full size counterpart. Signal lights have color lenses and come with a pre-installed light kit!

Specifications

Hammer Transfer Case

Ratio: 1.47:1
Gears: Wide 0.8 Mod Hardened Steel Gears
Features: 8 Bearings, Cast Casing, Hardened Gears

R3 Scale Single Speed Transmission

Ratios: Pinion/Spur 14/64 = 4.57:1
Internal Ratio: 1.78:1
Gears: Wide Steel .8 Mod, Delrin Spur, Slipper Clutch

Yota II Ultimate Scale Cast Axles

Ratio: 15/40 = 2.67:1
Width at Hex (Using 4mm TF2 Hexes): 178.2mm

Gelande II Chassis 

Billet: Aluminum Construction 
Adjustable Shock Hoops

Drive Shafts

High Quality Plastic Material 
Durable High Steel Yokes

Wheels

Type: Landies Vintage 1.9" Stamped Steel Beadlock Wheels
Hub: 12mm Hex~
Width: 22.9mm (0.90")
OD: 52.5mm (2.06")

Gelande II Truck Dimensions

Wheelbase: 275mm (10.83") 
Width: 215mm (8.46")
Height: 247mm (9.72")
Ground Clearance: 50mm (1.72")
Final Drive Ratio: 31.93:1

What's Included

• 1 x RC4WD Gelande II RTR W/ 2015 Land Rover Defender D90 Body Set (Grey)

Notes

• While some components may come assembled, we always recommend that you check the products to ensure all hardware is tight. In some cases, you may want to apply thread lock to some of the hardware that is already installed.
• Use good quality hex drivers to avoid stripping screw heads.
• Use thread lock when putting metal screws into metal parts.
• Steps marked with an asterisk (*) require thread lock.
• Use thread lock sparingly.
• Do not over tighten screws otherwise you may strip the thread.

Experience the versatility and advanced design of the 1/18 Gelande II for yourself. Packed full of capability, the Gelande II is ready for any challenging condition. Put your off-road driving to the test and see why the G2 is unmatched in its class!

The G2 is built with quality materials and craftsmanship. It can maneuver extreme descents and climbs with ease. The new 1/18 Mini Transmission provides power to the 1/18 Yota II Axles.

The core of the G2 is built for the true off-road enthusiast. From emergency and expedition vehicles, down and dirty off-road rigs and even daily drivers, the G2 can be customized to pull off any look you choose. The G2 delivers on performance and looks to match the driver's identity.

The G2 comes with double triangulated 4 Link Front and Rear Suspension. The servo is mounted on the chassis out of view for a more scale appearance.

Are you ready for your off-road experience?

Features

• True to Scale Design And Aesthetics
• Realistic Aluminum Ladder Frame Chassis
• R5 1/18 Mini Transmission V2
• 1/18 Cast Front And Rear Axle Set
• 4 Link Front And 4 Link Rear Suspension
• Rock Crusher 1.0" Micro Crawler Tires
• Stamped Steel 1.0" Stock Beadlock Wheels (Plain)
• 9G Analog Metal Gear Micro Servo
• The Ultimate Mini Scale Shocks (40mm)

Specifications

All New R5 1/18 Mini Transmission V2
Total Gear Ratio: 5.5 : 1
Pinion Gear: 55P 10T
Gear Material: Hardened Brass and Steel
Case Material: Plastic Injection Molded

All New 1/18 Cast Yota II Axles
Ratio: 2.55 : 1
Width at Hex : 92mm
Case Material: Zinc Alloy

G2 Suspension
Double Triangulated 4 Link Front and Rear Suspension

Shock Absorbers
Ultimate 40mm Scale Shocks - Can not be Oil Filled

Wheels
Type: Stamped Steel 1.0" Stock Beadlock Wheels (Plain)
Hub: 7mm Hex
Width: 7mm
Back Spacing: 7mm

Bumpers
Machined Billet Aluminum, Light Weight

G2 Truck Dimensions
Wheelbase: 130.71mm (5.15")
Length: 223.67mm (8.81")
Width: 110.23mm (4.34")
Height: 114.97mm (4.53")
Ground Clearance: 28.71mm (1.13")
Final Drive Ratio: 112 : 1
Weight: 1.14lbs / 0.52kg

What's Included

• 1x RC4WD 1/18 Gelande II RTR w/ Black Hawk Hard Body Set

Notes

• While some components may come assembled, we always recommend that you check the products to ensure all hardware is tight. In some cases, you may want to apply thread lock to some of the hardware that is already installed.

Enjoy all the fun of our popular 1/10 Trail Finder 2 in a 1/24 scale version!

This 1/24 Trail Finder 2 comes with all the true to scale detailing and quality performance to crawl through any terrain. Performance of the 1/24 is smooth with its R6 Mini Transmission, 4WD Drive-train, and 1/24 D44 Scale Axles, the 1/24 TF2 comes with Plastic 0.7" Beadlock wheels wrapped in some super scale Mickey Thompson 0.7" Baja Claw TTC Scale Tires to keep you trailing!

Whether it's outside on a trail or inside of your living room on an improvised course, the 1/24 TF2 comes prepared for creative challenges and is a perfect choice for any thrill seeking enthusiast. Experience all the fun and performance of the TF2 RTR, now in 1/24th scale!

Are you ready for your off-road experience?

Features

• 1/24 Trail Finder2 CNC Aluminium Chassis Set
• RC4WD Plastic Punisher Shafts (32mm - 37mm / 1.26" - 1.46")
• RC4WD 1/24 D44 Plastic Complete Axles
• R6 Micro Transmission
• Twister 5G Micro Servo
• N30 Micro Motor
• Spring Dampers for 1/24 TF2
• Super Scale 0.7" Beadlock Wheels
• RC4WD Mickey Thompson 0.7" Baja Claw TTC Scale Tires
• RC4WD 7.4V 320mAh Lithium Ion Battery W/ Balance Plug
• XR2 Ultimate Micro Radio and ESC/Receiver

Specifications

All New R6 Micro Transmission

• Motor: 30:1
• Internal Gear Ratio: 1.15:1
• Gear Material: Hardened Brass and Steel
• Case Material: Strong Durable Nylon

All New 1/24 D44 Plastic Complete Axles

• Ratio: 2.67:1
• Width at Hex: 71.6mm
• Case Material: Strong Durable Nylon
• Suspension: 4 Link Front and Rear Suspension

Wheels and Tyres

• Type: OEM Plastic 0.7" Beadlock Wheels (Black)
• Wheels Hub: Pin Type
• Width: 10mm
• OD: 19.5mm
• Tyres: officially licensed Mickey Thompson Baja Claw tyres

Dimensions and Weight

• Wheelbase: 120mm
• Length: 203mm
• Width: 91.7mm
• Height: 88.7mm
• Ground Clearance: 23.5mm
• Final Drive Ratio: 2.67:1
• Weight: 0.44lbs/0.2kg

What's Included

• 1x RC4WD 1/24 Trail Finder 2 RTR W/ Mojave II Hard Body Set (Black)

Notes

• While some components may come assembled, we always recommend that you check the products to ensure all hardware is tight. In some cases, you may want to apply thread lock to some of the hardware that is already installed.
• Use good quality hex drivers to avoid stripping screw heads.
• Use thread lock when putting metal screws into metal parts.
• Use thread lock sparingly.
• Do not over tighten screws otherwise you may strip the thread.