1/12 GT12 Battery Plugs & Charger Leads

The SmartAlarm has similar functionality to the SmartGuard, but is smaller and includes a programmable low voltage alarm. Being lightweight, the SmartAlarm can also be used as an on-board battery monitor and when combined with the remote twin 90dB sounder with LED it can give you live audible battery warnings in flight.

• Lithium Battery Cell Count: 1~8 Cells
• Lithium Cell Low Voltage Alarm Range: 2.0~4.0V
• NiCd, NiMH, Pb Pack Voltage Range: 3.3~24.0V
• Pack Low Voltage Alarm Range (NiCd, NiMH, Pb) 2.0~20.0V
• Voltage Display Resolution: 0.001V
• Current Loading of Test: 24mA
• Weight: 23g (Main unit)
• Dimensions (L x W x D): 67 x 39 x 13mm

Allowing charging or ESC fitment to allow use of 4mm or 5mm Bullet Batteries. Much easier to use than the tight standard plugs.

From CORE RC are these Lockdown Heatsink Bullet Plug Grips.

A tight and reliable connection between your LiPo and speed control eliminates any losses of power, increased resistance, arcing and general poor electronic set up.

Giving a reliable connection with an easy twist of the attractive looking locking screw.

Easy to identify Red +ve and Black -ve plugs helps prevent cross connection and that moment every racer dreads, the magic smoke escaping from your speed control !

4/5mm Size.

Adapter cable for you to connect to your ESC or charger to convert from Straight plugs to T-Plug.

Feature:

• For: ESC/Charger
• Material: Plastic
• Color: Red

Include:

• 4mm Plug w/ T-Plug Connector Wire (1 pc)

These conversion plugs allow the use of 4mm bullet connectors in batteries which have 5mm bullet connectors. After installing these conversion, the battery terminals will stick out and increase risk of short circuit.

Feature:

• For: 5mm Plug Battery

• Material: Brass

• Color: Gold

Include:

• Conversion Plugs (4 pcs)

Pre-soldered charging cable for charging all sorts of 2s batteries with the included balance port connector. This version comes with a XT60 for you to plug into your charger.

4MM BATTERY BULLETS AND 2MM BULLET FOR BALANCING

Feature:

• For: Charger

• Material: Metal/Plastic

• Color: Black/Red/Gold

• XT60 PLUG FOR ALL SKY RC CHARGERS

Include:

• Charge Cable (1 pc)

For anyone looking to finish off a neat electronics installation these low profile plugs with grips set things off. The plugs feature a recess area that makes soldering 11-16gaugae wire easy; whilst the colour grip allows for easy identification of polarity and something to grip onto whilst pulling the connector from the terminal (rather than tugging on the wire to unplug from your battery). Finished off with a RC Overhaul logo lasered on top they are not only stylish but functional accessory for anyone looking to overhaul their wiring.

These fit all batteries with a 4mm bullet terminal.

Use a few drops of CA glue to install the grip once the wire has been soldered to the plug.

Awesome plug covers that help with the removal of your battery plugs. Plus, assist you in plugging in the correct polarity.

Super bling look!

This 2S Charge Wire for Competition Batteries has a length of 60cm and comes with XT60, XH charger connection to 4/5mm, 2mm battery connectors.

Due to the 60cm Silicon-Flex cables and the high-end 4mm/5mm gold connectors, this charging lead is perfectly suited for its application.

For protection and reliable operation, the charge wires come with a protection mesh and shrink tube on both sides with our logo imprinted.

This Charge Wire solves the common problem, that the balancer wire is coming off unnoticed under the shrink tube at 4/5mm plug, undetectable for the user, making him believe that the battery or charger is broken!
Our Solution: Balancing wires in a protected area - No balancing wire at the 4/5mm plug – No wire can come off!

Enjoy a nicely organised pit table/working bench with our short charging lead!

This 2S Charge Wire for Competition Batteries has a length of 35cm and comes with XT60, XH charger connection to 4/5mm, 2mm battery connectors.

Due to the 35cm Silicon-Flex cables and the high-end 4mm/5mm gold connectors, this charging lead is perfectly suited for its application.

For protection and reliable operation, the charge wires come with a protection mesh and shrink tube on both sides with our logo imprinted.

This Charge Wire solves the common problem, that the balancer wire is coming off unnoticed under the shrink tube at 4/5mm plug, undetectable for the user, making him believe that the battery or charger is broken!
Our Solution: Balancing wires in a protected area - No balancing wire at the 4/5mm plug – No wire can come off!

5MM BULLET FOR BATTERY CONNECTION

SOLDERING REQUIRED

SOLD VIA MONKEY KING RC - VARIENT FITS LRP/INTELLECT AND OTHERS

INTELLECT G4 MALE BULLET PIN 4MM CONNECTOR (2PC) IPG4M

SOLDERING REQUIRED

Core RC 2S Balance charge extension lead.

INTELLECT BATTERY STOPPER - PK10