1/10 Car RTR

FTX EVO30 1:10 BRUSHLESS STREET RTR CAR - RED

It might be 4WD, but the EVO30 captures the essence of the legendary RWD supercars of the 80’s in all their glory.

Choose either the car park for sideways drift or hit the throttle for some speed runs by choosing either hard drift tyres or sticky soft treaded rubber tyres included with the EVO30.

With a wide aero inspired wide moulded main chassis featuring no screw heads, this smooth finish, coupled with a rear diffuser provides stability at speed. Shaft driven with sealed, geared front and rear differentials feature metal gears throughout for maximum durability. The modular radio tray neatly houses a 15kg Etronix metal geared steering servo and Hobbywing brushless 60A esc while the 3300KV brushless motor powered by a Voltz 2S 2500mAH Lipo battery delivers impressive straightline speed.

What’s more you can adjust the gyro enabled receiver to help fine tune your drifting and opposite lock handling at speed.
Oil filled shock absorbers, anti-roll bars and adjustable double wishbone suspension lets you tweak to suit your settings and tyre choice; either treaded rubber tyres for street racing, featuring 25mm wide front and 30mm wide rear for better stability at high speed or hard plastic boots on 6-spoke wheels for sideways drift driving.

Topped off with classic ‘80s body styling, that features a detailed moulded front grill with light lenses along with a front and rear multifunction LED light set, you just need to hit the power EVO30 style!

Features

• 99% Ready-to-run
• FTX 2.4ghz 5ch Radio System
• Etronix 3652 KV3300 Brushless Motor
• Hobbywing 60A Brushless Speed Control
• Etronix Waterproof 15kg MG Steering Servo
• Voltz 2S 30C 2500mAH LiPo Battery
• Etronix LiPo Balance Charger
• Gyro Stability Control Option
• Multifunction LED Light Box Control
• Scale finished body w/moulded accessories
• Front and Rear Anti-Roll Bars Included Rubber Street & Hard Slick Drift tyre sets i
• Front & Rear Metal Gear Sealed Differential
• Shaft driven 4WD
• Front CVD Universal Driveshafts
• Ball Bearings
• Adjustable Oil Filled Shock Absorbers
• Rear Moulded Diffuser Bumper
• Moulded wide main chassis featuring screwless base
• Quick Release Battery Holder

Specifications

Length: 438mm
Width: 200mm
Height: 130mm
Wheelbase: 260mm

Required to complete

• 4 x AA Batteries

FTX EVO30 1/10 BRUSHED STREET CAR RTR - BLACK

READY TO RUN

It might be 4WD, but the EVO30 captures the essence of the legendary RWD supercars of the 80’s in all their glory.

Choose either the car park for sideways drift or hit the throttle for some speed runs by choosing either hard drift tyres or sticky soft treaded rubber tyres included with the EVO30.

With a wide aero inspired wide moulded main chassis featuring no screw heads, this smooth finish, coupled with a rear diffuser provides stability at speed. Shaft driven with sealed, geared front and rear differentials feature metal gears throughout for maximum durability. The modular radio tray neatly houses a 9kg Etronix metal geared steering servo, Hobbywing brushed WP1040 esc, 17T 550 brushed motor all powered by a Voltz 2000mAH Ni-MH battery making it the perfect choice for entry level users.

Oil filled shock absorbers, anti-roll bars and adjustable double wishbone suspension lets you tweak to suit your settings and tyre choice; either treaded rubber tyres for street racing, featuring 25mm wide front and 30mm wide rear for better stability at high speed or hard plastic boots on 6-spoke wheels for sideways drift driving.

Topped off with classic ‘80s body styling, that features a detailed moulded front grill with light lenses along with a front and rear multifunction LED light set.

Hit the throttle and burn rubber with the FTX EVO30!

Features

• 99% Ready-to-run
• Etronix 2.4ghz 5ch Radio System
• Hobbywing WP1040 Brushed Speed Control
• 17T 550 Sized Brushed Motor
• Voltz 2000mAH Ni-Mh Battery Pack
• Etronix Waterproof 9kg Metal Geared Servo
• USB Charger
• Multifunction LED Light Box Control
• Scale finished body w/moulded accessories
• Front and Rear Anti-Roll Bars Included
• Rubber Street and Hard Slick Drift tyre sets
• Front & Rear Metal Gear Sealed Differential
• Front CVD Universal Driveshafts
• Ball Bearings Throughout
• Adjustable Oil Filled Shock Absorbers
• Rear Moulded Diffuser Bumper
• Quick Release Battery Holder

Specifications

Length: 438mm
Width: 200mm
Height: 130mm
Wheelbase: 260mm

Required to complete

• 4 x AA Batteries

RADIO-BATTERY-CHARGER INCLUDED!

Comes with Drift Wheels and Tyres -Swop for Carpet Tyres and Race!

Take to the streets with FTX’s new Banzai drift chassis. Modelled around the hugely popular FTX Vantage and Carnage platform, the Banzai brings Japanese drift styling to the entry level Ready-To-Run arena.

Featuring a 4wd shaft driven design with front and rear metal-geared differentials, the Banzai is 99% complete from the box. Blue anodized aluminium components add a little style to the chassis along with the functionality of oil filled adjustable shock absorbers, front CVA universal driveshafts, ball bearings, adjustable suspension turnbuckles for tuning and a centre drive slipper to protect the transmission.

A waterproof electronic speed control, servo and receiver allow for use in a wide range of conditions and the 2.4ghz radio provides interference free signal no matter where you are.

Topped off and finished with an S15 style pre-printed drift body and a hard compound drift tyre on scale finish wheels, the Banzai is the perfect introduction to sideways street action!

FEATURES

• RTR with Etronix 2.4ghz Radio System
• Waterproof receiver
• Waterproof brushed motor speed control
• Waterproof steering servo
• 550 brushed motor
• Voltz 1800mah 7.2v NiMh battery
• Wall charger for battery
• Moulded tub chassis
• 4wd shaft drive with slipper system
• Big bore oil filled adjustable shocks
• Gearbox metal crown and pinion gear
• Front universal driveshafts
• Adjustable turnbuckles
• Adjustable suspension(droop, camber, toe-in & wheelbase)
• Foam front bumper
• Scale finished wheels
• Drift tyres

SPECIFICATIONS

Length: 440mm
Width: 195mm
Height: 130mm
Wheelbase: 255mm - 256mm
Front Tyre: 24 x 60mm
Rear Tyre: 24 x 60mm
Gear Ratio: 6.5:1

RADIO-BATTERY-CHARGER INCLUDED!

Comes with drift wheels and tyres - swop out for Carpet Tyres and Race!

RADIO SHOWN MAY VARY*

Take to the streets with FTX’s new Banzai drift chassis. Modelled around the hugely popular FTX Vantage and Carnage platform, the Banzai brings Japanese drift styling to the entry level Ready-To-Run arena.

Featuring a 4wd shaft driven design with front and rear metal-geared differentials, the Banzai is 99% complete from the box. Blue anodized aluminium components add a little style to the chassis along with the functionality of oil filled adjustable shock absorbers, front CVA universal driveshafts, ball bearings, adjustable suspension turnbuckles for tuning and a centre drive slipper to protect the transmission.

A waterproof electronic speed control, servo and receiver allow for use in a wide range of conditions and the 2.4ghz radio provides interference free signal no matter where you are.

Topped off and finished with an S15 style pre-printed drift body and a hard compound drift tyre on scale finish wheels, the Banzai is the perfect introduction to sideways street action!

FEATURES

• RTR with Etronix 2.4ghz Radio System
• Waterproof receiver
• Waterproof brushed motor speed control
• Waterproof steering servo
• 550 brushed motor
• Voltz 1800mah 7.2v NiMh battery
• Wall charger for battery
• Moulded tub chassis
• 4wd shaft drive with slipper system
• Big bore oil filled adjustable shocks
• Gearbox metal crown and pinion gear
• Front universal driveshafts
• Adjustable turnbuckles
• Adjustable suspension (droop, camber, toe-in & wheelbase)
• Foam front bumper
• Scale finished wheels
• Drift tyres

SPECIFICATIONS

Length: 440mm
Width: 195mm
Height: 130mm
Wheelbase: 255mm - 256mm
Front Tyre: 24 x 60mm
Rear Tyre: 24 x 60mm
Gear Ratio: 6.5:1