1/10 Buggy Kits

Unleash unparalleled performance with the RC10B84D, a 1/10-scale 4WD buggy engineered for precision, speed, and racetrack victories.

Designed with cutting-edge features, this competition machine delivers superior handling and control. Its molded height-adjustable gearboxes ensure optimised drivetrain efficiency.

The long-arm suspension geometry enhances grip and predictability, while the optimised steering bellcranks and rack provide exceptional bump steer control, keeping your lines tight at every corner.

Fine-tune your setup with chassis bracing adjustments, giving you the flexibility to adapt to each track you race on. The RC10B84D allows for precise weight distribution and chassis balance, letting you push the limits with confidence.

Enhanced aerodynamics come standard with a low-profile body and two rear wing mount heights. The RC10B84D is finished with shock tower covers, 3.5mm turnbuckles and ballcups, and 13mm big-bore shocks, providing the ultimate blend of strength, precision, and performance, the RC10B84D is your key to place top of the podium!

Features

• Molded Height-Adjustable Gearboxes Front and Rear with Additional +2 Rear Gearbox for High-Grip Conditions.
• Long-Arm Suspension Geometry: improves grip and predictability in all conditions.
• Optimised Steering Bellcranks and Rack: improved bumpsteer control at all ride heights.
• Chassis Bracing: Fine tune chassis flex characteristics with upper and lower chassis bracing front and rear.
• Standard and HRC (High Roll Center) Rear Hubs Included.
• Insert adjustable caster block with 0, +/-1, and +/-2 degree inserts included.
• Forward and Back Motor Positions: used for further weight bias adjustment.
• Highly Adjustable Battery Holder with Thumb Tabs: allows for easy battery removal and fine tuning of weight bias.
• 2.5mm Thick Tapered 7075-T6 Aluminum Chassis with 10 Degrees of Kickup and Improved Departure Angle.
• Molded Ring and Pinion Gears Included.
• Aluminium Center-Mounted Servo Mount.
• Two heights Included for Rear Wing Mount.
• 7-inch Rear Wing.
• Low-Profile Body.
• Shock Tower Covers Front and Rear.
• 3.5mm Turnbuckles and Ballcups.
• 13mm Big-Bore Shocks.

Specifications

Power Source: Electric
Terrain: Off-Road
Body Style: Buggy
Scale Size: 1:10 Scale
Assembly Level: Kit (This vehicle comes as a kit and must be fully assembled by the user.)
Length: 395mm (15.55in)
Width: Varies
Wheelbase: Varies
Weight: Varies
Internal Gear Ratio: 2.50:1
Drive: 4WD
Product Status: Active

Required To Complete

• Motor
• Pinion Gear
• ESC
• Servo
• Transmitter and Receiver
• Tyres
• Wheels
• Polycarbonate specific paint

Please Note: This vehicle comes as a kit and must be fully assembled by the user. Electronics and/or an engine/motor may be required.

Team Corally SBX-425 - Push Your limits, lead the pack!

The Team Corally SBX-425 is an advanced 4WD racing buggy designed for serious RC enthusiasts and professional racers alike. Engineered in Olen, Belgium, using high-grade materials and cutting-edge technology, the SBX-425 builds on the legacy of its acclaimed predecessor, the SBX410, to set a new standard in precision, performance, and reliability. Every component of this competition car is engineered and rigorously tested to ensure top-tier quality and handling on the track.

Precision Engineering & Complete Race Spec

Belgian precision is evident in the SBX-425’s chassis and components. The ultra-low center of gravity chassis, constructed from anodized aluminium with carbon flex plates, delivers exceptional stiffness, agility, and balance. This results in superior handling and cornering speeds, allowing racers to push the limits with confidence. The SBX-425 comes fully race-spec’d straight out of the box, making it ideal for beginners and competition racers alike. Featuring a pro-level drivetrain, race-optimized steering, durable gear differentials, and race-proven shock absorbers, it’s engineered to outshine the competition from the very first race.

Adaptability & Customisation

Versatility is at the heart of the SBX-425. The buggy offers a wide range of tuning options including adjustable suspension arm positions, customisable steering setups, and optional rear shock positions. This level of adjustability ensures that drivers can tailor the SBX-425’s performance to their unique driving style and varying track conditions.

Robust Construction & Advanced Features

Key features such as the extra durable gear differentials, floating servo mount, and precision racing gears highlight the SBX-425’s commitment to durability and high performance. The chassis is bolstered with reinforced components like extra-strong aluminium arm holders with eccentric cam bushings for precise toe adjustments, and race-proven shock absorbers that have been tested in extreme conditions. The custom racing body not only showcases sleek aesthetics but also improves aerodynamics, directing airflow to maximize downforce and stability at high speeds.

Recommended Electronics

The SBX-425 is designed to work seamlessly with high-performance electronics. It supports 2S LiPo batteries with a specially engineered tray to maintain optimal weight distribution, and comes recommended to be paired with top-tier motors and ESCs for ultimate speed and control. With components like the Vulcan II Modified Motor, high-speed cooling fans, and CMM-10 ESC, the SBX-425 ensures consistent power delivery and reliability under the most demanding racing scenarios.

Your Path to Victory

Every aspect of the SBX-425 is optimized for performance and versatility. This is not just a racing buggy; it’s a platform built to adapt, excel, and dominate on any track. Whether you’re a club racer stepping up to a new challenge or a professional seeking the next competitive edge, the Team Corally SBX-425 is engineered to help you lead the pack.

Specifications

Car Type: Buggy
Age Requirement: Age 14+
Skill Level: Expert
Completion Level: KIT - Required Assembly
Assembly Time: > 1 Day
Drive Train: 4WD - Shaft Driven
Recommended Environment: Off-Road
Model Scale: 1/10 Scale
Length (mm): 410
Height (mm): 158
Wheelbase (mm): 287
Track Front (mm): 248
Track Rear (mm): 244
Ground Clearance (mm): 40
Weight (g) - No Battery: 900
Battery Compartment LxWxH (mm): 47x95x25
Shock Dia. ø (mm): 14
Front Shock Length (mm): 78,5
Rear Shock Length (mm): 90
Motor: Not Included
Power Battery: Not Included
Radio: Not Included
Servo: Not Included
Speed Control: Not Included
Charger: Not Included
Wheel Adapter: 12 mm Hex Adapter
Bearings: Full Ball Bearings - Rubber Shielded
Differentials: 2x Gear Differentials + Center Slipper Clutch
Front Suspension Type: Independent - C-Hub Type
Rear Suspension Type: Independent - Wishbones
Gear Pitch: 48-DP
Spur Gear (T): 81
Internal Drive Ratio: 2.5
Shock Type: Oil Filled "Big Bore" Aluminium Shocks - Coil Over Springs
Bevel Gear - Pinion: Precision CNC Machined - Hardened Steel
Chassis: 2.5mm - Aluminium 7075-T6 - Hard Anodised - CNC Machined
Differential FR - RE: Molded Composite Case
Outdrives: Hardened Steel
Lower Arm Holders: 5mm 7075-T6 Aluminium + Composite Inserts
Shock Tower - Front: 4mm - 3K Carbon Fiber
Shock Tower - Rear: 4mm - 3K Carbon Fiber
Motor pinion: Not Included
Spur Gear: Molded Composite Gear
Bodyshell: Polycarbonate - Clear - Trimmed

Tamiya welcomes a re-released and upgraded version of The Falcon which was originally released in 1986. To prevent drive shafts of rear trailing arms from dropping off, this kit features assembly universal shafts which employ ball bearings.

About the Model

• This is a 1/10 scale R/C model assembly kit
• The 0.7mm thick polycarbonate body is from original version of The Falcon
• Features assembly universal shafts to prevent drive shafts of rear trailing arms from dropping off
• Universal shafts and full ball bearings make for efficient drive
• The 2WD chassis has a plastic bathtub frame and features polycarbonate suspension arms and bulkhead
• CVA oil dampers are used at front (short) and rear (long)
• Comes with updated stickers that retain the spirit of the original Falcon

Separately Required Items

• What's included?
  
  • ESC
  • Type 540 motor
• What's needed?
  • Transmitter & receiver
  • Servo
  • Battery and charger
  • Paint for the polycarbonate body
  • Tools to help with assembly of the kit

Specifications

Brand

Tamiya

Category

Radio Control

Scale

1:10

Model Type

Buggies

Kit Type

Assembly Kit

Release Date

End of November 2026

New Release

Yes

Kyosho EP 1:10 RC Outlaw Rampage 2.0 PRO KIT

High speed desert racing machines built to blast across unforgiving terrain, that is the spirit of the Trophy Truck. As one of the most popular R/C models in this class, the Outlaw Rampage Pro has now fully evolved into the updated 2.0. This 1/10 scale 2RSA (2WD rear solid axle) machine delivers the thrilling sideways action Trophy Trucks are famous for. Based on the previous version but extensively refined, the Outlaw Rampage Pro 2.0 improves durability, drivability and overall versatility. A newly developed V2 gear set at the heart of the drivetrain features revised materials and tooth module profiles that reduce drivetrain noise while significantly increasing durability. The radio tray has also been completely redesigned, allowing greater flexibility in ESC placement and offering additional mounting positions for T-plug connectors. The new dustproof receiver case protects the sensitive electronics and provides easier access for maintenance, including easier gain adjustment when using a gyro-equipped receiver. Strengthened suspension and running gear combine with numerous detail improvements to elevate performance across the board. The result is an evolved machine with the potential to become the new standard for R/C Trophy Trucks. Sold as an ARR (Almost Ready to Run) kit with roughly 70% of the vehicle factory-assembled, simply install your R/C electronics and power system, paint the body, and you’re ready for action. Experience the exhilarating thrill of the rear-drive off-road performance as you control the power slide of the Outlaw Rampage Pro 2.0 through the dirt.


- ARR chassis kit is approximately 70% factory assembled.
- Includes unpainted clear body, pre-cut with complex trimming and mounting holes. Window mask sheets and pre-cut decals for window frames and logos are included for easy painting and finishing.
- Two grille options included: choose between square-headlight or round-headlight styles.
- Optional LED light units (2-lamp: No.97054-2 / 4-lamp: No.97054-4) can be installed without modification.
- R/C electronics, ESC, motor and drive battery sold separately.
- Compatible with both brushed and brushless motors.
- Scale off-road tires and silver-plated wheels, plus two spare tires are included.
- Full ball-bearing drivetrain reduces friction and improves efficiency.
- Aluminum front skid plate protects the chassis during hard landings. A spare plastic spare skid plate is also included.
- Three-piece front bumper protects the chassis during hard crashes.
- Front double wishbone suspension with long suspension arms delivers excellent stability and traction.
- Highly durable rear solid axle suspension with four-link support delivers exceptional off-road capability.
- 32-pitch module counter gears and differential gears in the V2 gearbox feature new materials and shape (spur gear: 48-pitch).
- Lever-lock battery holder allows quick battery changes. New battery holder cover accommodates LiPo balance connectors.
- Hex-head screws are used throughout for easy assembly and maintenance.

Main chassis incorporates a high-rigidity resin bathtub frame for strength with easy maintenance. Paired with the radio tray, it forms a durable structure built to handle the punishment of hard off-road driving.

Inspired by 1970s–80s trophy trucks, the pre-cut body includes masking sheets to make painting simple, while the grille features separate black plastic parts that add a bold, aggressive touch to its appearance.
*Photo shows a painted example. White line decals are not included.

The rear roll cage and spare tire carrier add impressive scale realism. The mounted spare tire is fully functional, and changing the number carried can even be used to fine-tune the truck’s weight balance.

Aluminum oil shocks feature hard-anodized cases for durability and titanium-coated shafts for ultra-smooth action. Large-capacity aeration design with long stroke delivers excellent control and traction over rough terrain.

New offset rod ends on the steering wiper side prevent the tie rods from popping off under full suspension compression. The lower suspension arm shape has also been revised to avoid interference with the stabilizer rod ends.

Based on the original design, the knuckle arms and front hub carriers have been reinforced for increased durability. These parts are also compatible with the existing Outlaw Rampage Pro.

A redesigned rear stabilizer link increases breadth of tire compatibility. In addition to the standard 2.2 mm front and rear stabilizer bars, the kit includes 1.8 mm and 2.6 mm options for suspension tuning.

Revised materials and tooth profiles in the new V2 gears reduce drivetrain noise and improve durability with the same tooth count and modules. Color has been changed from black to grey.

The receiver has been moved into a protective case on the radio tray, making gyro gain adjustments easier for receivers with built-in gyros. Additional ESC mounting space at the rear with two battery connector holder positions allows broader compatibility with ESCs that have shorter motor wires.

New heat-resistant Teflon dust cover sits between the motor and motor mount, preventing dust drawn into the motor from entering the gearbox and damaging the gears.

Kyosho Tomahawk'85 WC Worlds Spec 2WD 1:10 Kit Ltd

At the inaugural IFMAR (International Federation of Model Auto Racing) 1/10 EP (electric) Off-Road Car World Championship held in the United States in 1985, the latest racing buggies from around the world gathered to compete for the title. The Tomahawk led the Kyosho’s charge in the 2WD class, including a works-spec machine driven by its designer, Akira Kokawa. 41 years later, the works-spec Tomahawk driven by its designer, Akira Kogawa, has been revived. Released as the 20th installment of the Kyosho Vintage Series in a limited production run, the Tomahawk ’85 World Championship Spec is based on the Tomahawk reissued in 2015. By incorporating newly developed parts and including optional components as standard, it faithfully recreates the World Championship entry model while delivering significant performance upgrades. The Tomahawk’s signature ladder frame has been updated to stainless steel, while the rear suspension plate and gearbox plate are made from A7075 duralumin to enhance chassis rigidity. Although a stainless-steel frame was prototyped back in 1985, it was never commercialized, making this ’85 World Championship Spec its first production release. The front suspension is reinforced with a combination of an integrated steel caster lock and a CNC-machined arm shaft lock. Newly designed FRP shock towers are used front and rear, and an FRP servo mount plate lowers the center of gravity, leaving no detail overlooked. In addition, numerous modifications, such as the addition of a rear wing and the inclusion of a ball differential as standard, both absent on the original Tomahawk, result in a finish worthy of the “World Championship Spec” name. Celebrating the racer that helped define EP buggy racing at the first IFMAR World Championship, this kit delivers both historic authenticity and thrilling performance for nostalgic fans and new enthusiasts alike.
● Special edition Tomahawk, one of the top 2WD buggies of the mid-1980s.
● Recreation of the 1985 1/10 EP Buggy World Championship worksmachine features enhanced performance and compatibility with modern R/C systems, motors, and batteries.
● Styled after the car driven by designer Akira Kokawa at the 1985 World Championship.
● Includes peppermint green front/rear wheels and rear wing as standard.
● Reinforced frame, suspension, and drivetrain improve overall performance.
● New servo mount with holes for mounting the Kyosho Le Mans 240S ESC.
● High-efficiency universal swing shafts included as standard.
● Ball differential, which was previously an optional upgrade, is now equipped as standard.
● Slipper clutch supports smooth power delivery, including brushless motor setups.
● Rear suspension and gearbox plates are A7075 duralumin with gunmetal finish.
● Medium compound tires on front and rear provide strong grip.
● Body is identical to the standard Tomahawk, with newly designed decals included.

Recreates the Tomahawk used by Kyosho Works Team driver Akira Kogawa at the 1985 World Championship. Special parts are incorporated throughout, and it features wheels molded in his signature peppermint green color.

Signature bent stainless steel box-section ladder frame combines with A7050 duralumin rear suspension and gearbox plates to significantly increase rigidity for demanding track conditions.

Front and rear shock towers are upgraded from aluminum to 3mm thick black FRP, matching the 1985 race-spec configuration.

Red aluminum oil shocks inspired by the World Championship Kyosho works model include dial spring tension adjustment for precision setup compared to standard spec spring stoppers.

Equipped with same type ball differential as used on the original 1985 World Championship machine. Allows controlled slip under load to improve traction and cornering performance.

The wheel hubs used to secure the rear wheels are a completely new design. By locking in with the wheel ribs, they greatly improve mounting rigidity and effectively enhance rear tire traction.

New FRP servo mount plate lowers the center of gravity and shifts the servo forward to optimize weight distribution for improved front- end response.

While the standard spec Tomahawk was without rear wing, the ’85 World Championship spec featured a peppermint green rear wing to match the wheels. Wing mount is newly designed for this model.

• This is a 1/10 scale R/C model assembly kit
• A slipper clutch (from Item 54018 DB01 Slipper Clutch Set) provides stable off-road drive
• The drivetrain is gear differentials
• The gear differentials (from Item 54329 DB01 Gear Differential Unit) feature steel bevel gears (from Item 54428 Steel Bevel Gears for TA06 Gear Differential Unit) which need less maintenance and are compatible with high-power motors
• Front and rear universal shafts ensure efficient drive and minimal disruption
• Front and rear hex hubs allow a wide choice of wheels and tyres
• Square-shaped battery packs can be installed
• Comes with a dedicated carrying case
• Detailed stickers, masking stickers, and Baldre body are included
• Please note motor, R/C equipment, battery pack, etc. are sold separately
• Carton quantity is 4 and EAN is 4950344587537

• ESC
• Transmitter and receiver
• Servo
• Motor
• Battery and charger
• LEDs

• 1/10 R/C assembly kit. Length: 414 mm, height: 136 mm, width: 233 mm. Wheelbase: 283 mm
• The classically designed 0.7 mm thick polycarbonate body is split into three sections to recreate the tapered lower shape of the actual dune buggy
• NEW: Newly designed 2WD chassis is based on the one-piece monocoque frame and roll cage to allow use of realistic bodies
• The BB-01 chassis employs new front double wishbone suspension with A-shaped arms and rear trailing arm suspension with long trailing arms, which are inspired by UTVs and give impressive performance
• The 2WD chassis with rear motor features rear-position, inspired by the same layout of the actual vehicles of the era, and allows great rear traction
• The four-wheel double wishbone suspension system uses CVA oil front/rear aluminium aeration dampers for impressive performance and classic look
• Transmission uses the TA06 rear ball differential for consistent traction and may be outfitted with the separately sold TA-06 oil-filled gear differential, which allows the use of many existing Grade-Up parts
• Features full ball bearings and universal drive shafts
• Rear roll cage can be removed by detaching screws, which ensures ease of maintenance around the motor
• NEW: New metal-plated bead lock type wheels are paired with NEW large-diameter tyres
• Includes driver figure and light cases for extra realism, and 5th spare tyre mount adapter (spare tyre may be purchased separately for added realism)
• Requires 2-channel radio, low profile steering servo, 540 motor, ESC, 7.2-7.4volt battery with compatible charger and Tamiya PS paint to complete

• 53929
• 53930
• 53696
• 53697
• 53983
• 53779

• Polycarbonate body (0.7mm thickness) is pre-cut and pre-painted in light blue
• Comes with metal-plated parts (A, E, G and front/rear wheels)
• Window nets, number plates and dummy antenna included
• Includes new stickers designed by Jun Watanabe’s brand Blockhead Motors

• 1/10 scale R/C assembly kit. Length: 425mm, height: 140mm, width: 225mm 
• Wheelbase: 255mm 
• Durable and lightweight ABS box type frame is matched with a battery case which is compatible with modern power sources such as Tamiya Racing Packs and LF batteries
• 4-wheel independent suspension consists of coil springs and trailing arms
• A wide tread ensures excellent off-road stability
• Enclosed gearbox includes differential gears for smooth cornering
• Driveshafts feature dog bone-type joints and dust cover
• Includes 540-type brushed motor

• Two-channel radio, steering servo, 7.2-7.4volt battery with compatible charger

This R/C model assembly kit creates a 4WD buggy, with a lightweight and durable stylized polycarbonate version of the legendary Hot Shot body. The reimagined comical body comes pre-painted in red and all that is needed is the application of the included stickers, and voila! A new, Comical Hot Shot which pays homage to Tamiya’s classic 1985 Hot Shot kit! The GF-01CB chassis in which the body sits on top of is a gear-driven unit that provides a thrilling drive and super wheelies when you jam on the throttle.

GF-01: Seriously Stable 4WD
This gear-driven 4WD chassis is based around a lightweight and tough monocoque frame, with power provided by the centrally-positioned motor. Sealed gearboxes protect from dust and debris and are integrated into the frame, while the built-in differential gears provide smooth cornering. This is reinforced by 4-wheel double wishbone suspension with CVA oil dampers and a two-piece tie rod steering setup with the servo on the left for excellent response. Two-piece wheels are joined by ST block bubble tires, and WR-02 or GF-01 Hop-Up Option parts are available to hop-up your model.

• 1/10 scale R/C model assembly kit.
• Includes a lightweight and durable stylized polycarbonate version of the Hotshot body and wing, developed specially for this model. The body is pre-painted in PS-2 Red. Stickers based upon the 2007 re-issue Hotshot are included for decoration.
• Stylish bumper and muffler parts are included, as well as dedicated side guard components.
• Separately sold 5mm LEDs can be used to light up the model. Light pods are included.
• ST block bubble tires have stepped block patterns (width/diameter: front 45/99mm, rear 55/99mm).
• The GF-01CB chassis offers efficient gear-driven 4-wheel drive.
• ABS two-part wheels have red and white spoke parts.
• CVA Super Mini oil dampers molded in red ensure your ride has superior cushioning.
• A rear wheelie bar lets you perform thrilling wheelies by slamming on the throttle.
• Includes 540-brushed type motor.
• Includes NEW TBLE-04S ESC. Compatible with brushless motors (sensored) of 21.5 turns and higher, and Tamiya brushed motors 25 turns and over.
• Requires: 2-channel radio, steering servo, 7.2-7.4volt battery pack and compatible charger.
• NOTE: Must use round type stick battery pack. Square shaped batteries will not fit the battery compartment.

This assembly kit R/C truck features a stylish body inspired by the breathtaking, exciting low form of U.S. stadium racing trucks. Made from lightweight and durable polycarbonate, it features a rear wing, and can be decorated using the flashy markings included in the kit. The chassis provides suitably dynamic driving fun, and is mounted with front and rear wheels of differing offset, mounted with radial semi-pneumatic tires for a stable ride. The DT-03T platform is intended as an easy-to-get-started chassis to encourage young drivers to enter the world of R/C. Its intuitive yet tough design allows hassle-free assembly and gives less experienced users the opportunity to get to grips with R/C model composition and construction.

About the DT-03 chassis
The stylish slimline form of this chassis stems from its lightweight yet durable monocoque frame, which features a longitudinally-positioned battery and the R/C equipment along the centerline for excellent balance. The combination of a long 287mm wheelbase and 4-wheel double wishbone suspension married to CVA oil dampers with long arms at a 25-degree attachment angle, allows the model to handle with stability on poor surfaces. The rear-positioned gearbox is sealed to protect from dust and dirt, with the built-in differential gear offering smooth cornering.

• Length: 390mm, Width: 235mm, Height: 150mm
• Weight: 1,330g (not including R/C unit, battery pack)
• Tread: 205mm (Front), 208mm (Rear)
• Tire Width/Diameter: 31/88mm (Front), 38/88mm (Rear)
• ABS Monocoque Chassis Frame
• Shaft-Driven 4WD
• F/R 3-Bevel Differentials
• 2-Piece Steering Tie-Rod
• 4-Wheel Double Wishbone Suspension
• Gear Ratio＝8.1:1 or 10.04:1
• GT-Tuned Motor (25T)
• ESC included

• Specifications
• Length: 430mm
• Height: 150mm
• Width: 220mm
• Weight: 1,200g (excluding R/C equipment, battery, etc.)
• Wheelbase: 255mm
• Tread (F/R): 186mm
• Tire Width/Diameter: 19/74mm (Front), 35/83mm (Rear)
• ABS Resin Bathtub Chassis
• Rear-Wheel Drive
• 3-Bevel Differential Gears
• F/R Trailing Arm Suspension
• F/R Friction Dampers
• Gear Ratio＝1：7.54 or 1:9.05
• Type 540 Motor included

• Length: 400mm, Width: 210mm, Height: 150mmWheelbase: 250mm
• Tread: F170mm, R175mm
• Tyre Width/Diameter: F19/74mm, R35/83mm
• Chassis: 2mm Thick FRP Plate with Reinforcing Aluminium Plate
• Rear-Wheel Drive
• Weight: Approx. 1730g
• Type 540 Motor included (Compatible with kit-included motor or Item 53689 540J Motor only)
• No Differential Gears
• Front Suspension: Double Trailing Arm, Rear Suspension: Swing Axle
• 4 Oil Dampers
• Gear Ratio=6.5:1 or 9.3:1

• Two-channel radio, steering servo, 7.2volt battery & battery charger, and Tamiya TS paint

• 1/10 scale 2WD R/C model assembly kit
• 2.5mm thickness FRP chassis gives a low centre of gravity for excellent balance
• The battery pack position has been slightly enlarged. Note: This kit is not compatible with square-shaped battery packs. Rounded profile battery packs must be used
• 4-wheel double wishbone suspension employs CVA oil dampers
• The sealed gearbox features TTC, which was Tamiya's first slipper clutch and protects gears from impacts and gives stable drive by limiting wheelspin. Externally the same as on the original, it features a modernised internal design, and can be adjusted simply by removing the gearbox cover and turning the lock nut
• Efficient 0.5 module gear included
• A low-profile servo is required for this model
• High-traction front rib-spike and rear square spike tyres provide superb response and awesome cornering
• Comes with durable and lightweight polycarbonate body and rear wing, plus a protective under cowl

• Two-channel radio, steering servo, 7.2-7.4volt battery with compatible charger, and Tamiya PS polycarbonate paint

The Fighting Buggy was originally exported as the Super Champ in 1982 across the globe. For a limited time only, it is back as a special re-release celebrating 36-plus years after it originally made its debut in hobby stores.

The re-release kit begins with a new name, which is the same as that used by the original Japanese release of the R/C model. While it features a variety of tweaks and upgrades, Tamiya's designers made sure to retain the drivability, appearance and characteristics of the original.

• 1/10 scale R/C model assembly kit.
• The classic body of the original is reproduced in durable ABS resin with an aluminum roof panel with wing.
• Stickers retain many of the themes of the classic model while also adding some new motifs.
• Lightweight and durable 2.5mm thick FRP chassis plate is compatible with Item 55105 Tamiya LF Battery LF1100-6.6V Racing Pack (M-Size) (sold separately).
• Original transverse damper rear suspension setup with progressive spring and separate oil reserve tank is again employed. Front suspension is double trailing arm type. Front/rear sus arms are die-cast.
• Employs durable die-cast sealed gear case with direct drive setup, which also houses the motor.
• Ribbed front and rear spike tires. They are fitted securely to 3-piece wheels.
• Type 540 motor included.
• Comes in nostalgic blister pack style packaging.
• Requires: 2-channel radio, steering servo, ESC, small 7.2volt battery pack with compatible charger, and Tamiya TS Paint.

About the Lazer ZX7.5
The 1/10 scale EP (electric) buggy, particularly high-traction 4WD models, offers an ideal entry point into R/C cars while also representing a long-established racing category. From World Championships to elite competitions worldwide, this class delivers intense, high-performance racing. Kyosho’s latest weapon for this competitive arena is the Lazer ZX7.5. Carrying the legendary “Lazer” name synonymous with Kyosho’s 4WD racing buggies, it builds on the proven ZX7 platform with comprehensive refinements and new components, delivering performance capable of competing at the highest level. A key focus of the ZX7.5 is keeping pace with the ever-increasing speeds of modern racing. A newly designed main chassis combines optimized center of gravity and weight distribution to enhance overall performance. Components from the Ultima RB7.5 2WD buggy have also been strategically adopted to further elevate its capabilities. Beyond pure speed, the ZX7.5 also improves durability, expands setup options, and enhances maintenance efficiency. Modern buggy racing spans a wide range of surfaces from ultra-high-grip carpet and artificial turf to slippery dirt tracks, and the ZX7.5 is engineered to handle them all. Whether you’re aiming for competitive racing or stepping up from mid-range models like the Lazer SB Dirt Cross 4WD, you can rely on the Lazer ZX7.5 as a racing partner to perform at every level.

- 1/10 scale 4WD racing buggy designed for wide range of surfaces from high-grip carpet to loose dirt tracks.
- Shaft-driven 4WD system delivers excellent drivetrain efficiency and high traction performance.
- Front and rear double wishbone suspension provides superior traction and stability.
- Optimized balance achieved through revised front-to-rear weight distribution and component layout.
- Floating servo mount and battery holder preserve chassis flex for improved handling.
- Includes two types of front upper plates for fine-tuning front-end grip characteristics.
- Sliding motor mount allows easy gear backlash adjustment and quick motor removal.
- Includes mount for optional motor cooling fan installation.
- Front universal shafts feature retaining rings to prevent pin loss, supporting high-power setups.
- R/C system, ESC, motor, chassis battery, and front/rear tires are required separately.

Thickness of the high-rigidity A7075-T6 aluminum main chassis has been reduced from 2.5mm to 2.0mm for lighter weight. Increased chassis flex also contributes to improved grip.

Centre bulkhead (gearbox) is positioned 7mm further forward compared to the Lazer ZX7, rebalancing front-to-rear weight distribution for improved traction and stability. It is equipped with a geared center differential, with an optional slipper clutch conversion available.

Steering servo stay changed to a one-piece aluminum design. Floating servo mount layout minimizes the effect on chassis flex for smoother steering characteristics.

Includes new aluminum big bore oil shocks with φ13mm pistons as standard. Resin damper caps improve speed over surface gaps and recovery from changes in posture for improved driving stability.

Caster angle can be adjusted to 7°, 10°, or 13° by changing resin bushings. Enables quick setup changes to suit driver preference and track conditions.

New design rear hub carrier separates the upper arm mounting point to allow adjustment of upper arm length, mounting height, and roll center. Outer suspension pin height can also be changed with resin bushings. High-rigidity aluminum construction.

Sintered steel internal gears deliver higher durability in the front and rear differentials. Revised gear ratios enhance stability. Also compatible with optional ball differential units.

Designed exclusively for shorty LiPo batteries. The compact carbon battery holder secures the pack without fully restricting it, preserving chassis flex characteristics.

High-downforce forward-cabin body design improves aerodynamic performance. The rear wing is shared with the Ultima RB7.5 2WD model, delivering stable downforce and increased grip.

Front Upper Plates (2 Types) ・Type A: Promotes front-end roll with sharper steering response. ・Type X: Increased front rigidity for improved stability.

The simple chassis of the Dirt Cross delivers its high performance on all fields of action, from flat dirt to off-road racing circuits. The shaft drive 4WD at its core is based on the Lazer ZX-5, which competes at the highest levels around the world including the world championships.

(Requires all electrics & Assembly

The newly designed body positions the cabin near the rear in traditional racing buggy style to create fresh impressions with new drivers and a sense of nostalgia for those with more years behind the controls.

The driver figure used to be standard in Kyosho R/C buggies in earlier times and has been revived in this model to increase the sense of realism. The driver figure can also be attached to the 2WD Dirt Master. Polycarbonate gear cover protects the spur and pinion gear when driving on surfaces with gravel and stones. The gear cover can be easily attached and detached with screws.

Compatible with most mainstream R/C car batteries available. The battery is secured with a hook-and-loop fastener belt, so various battery sizes and shapes can be secured in place.

Resin oil shocks equipped on front and rear suspensions soak up the bumps from the road surface. Dial adjustment of spring tension makes it easy to change chassis height setting.

H-pattern pin tires are equipped on front and rear to provide reliable grip on any surface. Newly designed spoke wheels recreate that retro style to match the body form.

Slipper clutch protects the gears and drive system from excessive loads. Tension settings of the slipper clutch can be adjusted to change driving characteristics.

Front and rear suspension upper arms and steering rod use turnbuckles so simply turn to adjust rod length and change camber angle and toe angle settings.

Body Designed combining retro vibe with a modern touch. The conventional rear motor chassis design with some modern enhancements allows great driving experience on all types of surfaces.

Off-road buggies are famous for their ‘go-anywhere’ capabilities and the 1/10 scale EP (electric) format is particularly popular. True to its dirt bashing prowess, Kyosho is proud to introduce the ‘Dune Master’ to the Ultima SB series of mid-class EP buggies. Built on the Ultima SB chassis with rear motor RWD (rear wheel drive) for its superior rear tire traction and manoeuvrability, the Dune Master features a new basher body that looks like a modified car rather than the open wheel buggy style. New tire and wheel designs highlight the appeal of the original car body style. Based on the Ultima RB5 chassis which was previously a competition-level racer, each component has been reviewed to deliver superior handling and control for beginners at an optimal price. The rear motor configuration improves rear grip, allowing for traction stability on low-grip surfaces such as sports fields and open terrain as well as delivering high-speed performance on proper R/C race tracks. The new Ultima SB Dune Master and its highly popular Ultima SB Dirt Master predecessor, set the standard for modern mid-class buggies that can be enjoyed by all drivers, either as a step up from entry-level models, or as a second car for experienced drivers.
●Standard EP unassembled buggy based on racing model design delivers high-performance at a great value priced.
●Newly designed basher body (unpainted) is included with decal set.
●Easy to assemble resin main chassis exhibits optimal flexibility and is compatible with most standard R/C systems.
●Rear motor design produces effective grip of the rear tires, making it easier to control.
●Includes front & rear tires with wheels that provide stable grip on various road surfaces and enhance scale appearance.
●Slipper clutch equipped as standard protects the gears from excessive loads on the drive system. Can be adjusted for different driving characteristics.
●Double wishbone suspension on front and rear delivers superior surface tracing. Supported by precision resin oil shocks.
●Turnbuckles on suspension and steering rods allow length adjustment while installed for fast and accurate setting changes.
●Steering mechanism is equipped with a servo saver function that protects the servo from crashes and shocks.
●Full bearing specifications are standard and deliver exceptional drive system efficiency.
●Compatible with optional parts for the Ultima series for further tuning and and styling.
●Paint in your choice of color and then apply the included decals to achieve the finish shown in the photo.

Newly designed body is based on a full-scale off-road vehicle in the basher or Baja style. Its realistic sense of scale recreates a dynamic off-road atmosphere different to other off-road racing buggies.

Front fog lights can be fitted with optional LED light unit (sold separately). In addition, side mirrors and driver figure in the cockpit recreate a more realistic driving experience.

Realistic molded resin roll cage mounted on the rear of the chassis recreates that wasteland dirt basher style. Roll cage can also be fitted with vintage car rear wing (sold separately) to add a wild style to its elevated driving performance.

Wheel design is aligned to its real-car like body styling. Rear wheels are the same dish type used on the Dirt Cross 4WD while the front wheels are newly designed for the Dune Master.

Micro pin spike tires on front and rear deliver extreme grip. Wider front tires than the Ultima SB Dirt Master optimize front/rear grip balance while elevating overall appearance.

Rear 2WD off-road buggy based on the competition-level Ultimate RB5 chassis with a rich track record at major races including World Championships. Compatible with almost all batteries for 1/10 scale models including standard straight packs.

Resin oil shocks absorb and moderate feedback from the road surface to maintain stable posture of the vehicle. Dial adjustment of spring tension makes it easy to set chassis height. Wide range of race-spec springs can also be fitted.

Gear differential on rear enables smooth cornering and is easy to assemble and maintain. Add diff oil (sold separately) to convert into oil-filled diff. Ultima series ball differential can also be fitted for circuit driving.

Tapping screws with easy maintenance 2mm hex heads are mainly used for fixing plastic parts, instead of plus-head screws usually used on entry-level models.

Versatile and easy to drive 2WD buggy for pure off-road action !

Kit Form - Requires all electrics

Buggies were created to venture off-road over rough surfaces at high speed and the Ultima SB Dirt Master is a return to the purest form of this fun and excitement. If you want more than the entry-level model can deliver but top-end models are too focused on racing, the Dirt Master is perfect for good honest bush-bashing fun! Based on the competition-level Ultima RB5, the Dirt Master was developed as a mid-class buggy featuring high quality key performance components, at a reasonable price. The rear motor layout ensures secure rear tire grip that demonstrates rock-solid stability over low grip surfaces such as gravel and riverbeds. As the Ultima SB Dirt Master shares its racing heritage with the RB5, it is also at home on fully-fledged RC racing circuits too. With the excellent basic chassis design and a completely new body with a nostalgic flair, beginner drivers looking to step up to the next level of performance or hard-core racers looking for some fun will discover the Ultima SB Dirt Master is true to the original spirit of the buggy.

●Based on a competition-level racing buggy, this unassembled EP buggy kit delivers high performance at a low price.
●Rear motor design delivers excellent rear tire grip and superior control.
●Included front/rear tires and wheels demonstrate stability over various types of road surfaces.
●Classic style body with ageless smart design is equipped with a rear wing that enhances driving stability.
●Resin main chassis is easy to assemble and exhibits moderate flex characteristics, and can be equipped with standard RC components.
●Race-proven double-wishbone front and rear suspension is equipped with precision resin oil shocks.
●Steering mechanism is equipped with a servo saver function that protects the servo from crash shocks.
●Full bearing specifications as standard greatly improves drive system efficiency.
●Compatible with optional parts for the Ultima series and racing springs.
●Driver Set from 2014 Beetle (No.SCB003B) can be installed to enhance scale realism.

Unique retro modern body design. A great balance of modern air flow technology with a touch of nostalgia in the design. Clear kit body for customizing and graphics decals are also included. Rear wing is included for increased rear traction.

Grip and drive power is increased with the rear overhang motor mount that achieves superior traction and driving stability. A motor guard is also equipped to protect the motor from impact after jump landings.

Superior surface tracing from the proven double-wishbone suspension system incorporates turnbuckle rods that allow length to be adjusted for efficient setting changes.

Moderate flex characteristics of the resin main chassis enhances grip for control stability and allows plenty of room for easy installation and assembly of RC components.

Resin oil-filled shocks absorb and reduce shocks from the road surface to maintain stable posture. With dial-adjustable spring tension, chassis height is easily changed. Compatible with competition-level springs.

Rear gear differential enables smooth cornering and is easy to assemble and maintain. For elevated performance on racing circuits, the ball differential for the Ultima series can be installed.

Full ball bearings that reduce drive loss equipped throughout the drive system.

Tapping screws are used to secure resin parts. Unlike entry-level models which use Phillips screws, the 2mm hex head screws make assembly and maintenance easier.

Slipper clutch is included as standard to protect the gears by allowing moderate slip when the drive system is under heavy load and allows adjustment of driving characteristics. Gear cover can also be installed to protect the gears from dirt and dust.

Kyosho’s 1/10 scale Ultima EP buggy boasts a rich racing history, including multiple world championship titles, and continues to offer a diverse lineup ranging from entry-level to high-end models. Now, its top-tier RB7 has evolved into the upgraded RB7.5, incorporating numerous refinements to enhance performance.
The new model adopts big-bore oil shocks equipped with X-ring seals for smoother operation and leak prevention. The shock stays have been upgraded to lightweight yet highly durable carbon fiber, offering greater strength for intense racing conditions. A newly added front shock stay guard helps prevent damage during rollovers. At the rear, aluminum bulkheads and hub carriers enhance rigidity while broadening setup options. The body is based on the RB7, but a spoiler on the rear of the cabin combines with an improved rear wing and the addition of a front wing to optimize aerodynamic performance.
By integrating newly developed components and standardizing several high-performance upgrades, the RB7.5 remains true to its original strengths while evolving into a machine capable of competing at the highest level. Whether on traditional dirt tracks or modern high-grip carpet surfaces, this latest Ultima model is built to meet the demands of competitive drivers.

- Low center of gravity design 1/10 scale EP (electric) racing buggy, adapted for high-grip surfaces.
- Features new body with improved aerodynamics based on the previous model. The body comes unpainted in the kit.
- The double wishbone front and rear suspension provides excellent surface tracking and is equipped with newly designed aluminum oil shocks.
- Lightweight aluminum front shafts and universal swing-type rear shafts provide excellent drive efficiency.
- Turnbuckle upper suspension rods and steering linkage rods are made from highly durable, crash-resistant chrome-molybdenum steel.
- Aluminum rear suspension holder allows adjustment of rear toe angle and tread by swapping bushings.
- Laydown-type gearbox features a spur gear cover. Gearbox type can be changed by purchasing parts separately.
- Equipped with a ball differential for dirt track use and a slipper clutch to protect the gears from excessive load.
- Differential balls are made from high-precision, durable tungsten.
- The kit is primarily designed for dirt track use but can be easily modified for high-grip carpet surfaces with minimal adjustments.
- Compatible with existing optional parts for setting modifications and upgrades.

This rear-wheel-drive off-road buggy features a midship layout, positioning the motor just ahead of the rear wheels. The high-rigidity duralumin main chassis has undergone slight modifications, while the proven low-profile gearbox and other key components have been carried over from the Ultima RB7.

A new body based on the superb aerodynamics of the RB7, features design modifications to the rear cabin to further enhance efficiency. The rear wing has also been redesigned for increased strength, generating powerful and stable downforce.

The front and rear shock stays have been upgraded from the RB7's plastic material to 4mm thick carbon fiber, significantly enhancing strength and rigidity. The new design provides better protection against damage during rollovers, and a resin protector comes standard to safeguard both carpet and artificial grass surfaces.

New aluminum oil shocks with 13mm pistons enhance stability at high speeds and over uneven surfaces while effectively absorbing landing impacts. The springs have also been upgraded for improved performance.

The aluminum steering crank and plate ensure smooth operation and high rigidity, enhancing steering response. Additionally, the upper bulkhead shape has been modified to prevent interference with the servo horn.

The completely redesigned aluminum rear hub carriers allow for changes in upper rod length by adjusting spacer thickness, increasing the capacity for ball bearings. The height of the suspension pins can be adjusted by replacing the resin bushings.

The new rear bulkhead features a separate upper rod mounting point. The aluminum upper rod mount enhances suspension rigidity and allows for tuning of the suspension geometry by adjusting the rod mounting height.

The LCG battery mount allows forward-back weight distribution adjustments and features a tool-free, one-touch system for quick battery installation and removal.
*Only LL size wheelbase can be used with rear double wishbone suspension set.

The previously optional front wing is now included as standard. It helps adjust aerial posture during jumps and serves as an effective tuning part, also altering cornering characteristics.

Require all electrics

The increased rigidity from the addition of the center bulk support results in improved traction when exiting corners.

Secret high performance works team buggy
Finally revealed to the world!

At the 1987 EP (Electric) Off-Road World Championships in the UK, the Kyosho Ultima achieved total domination with a clean sweep of the podium. This limited-edition model based on the Kyosho Works team car designed and driven by Akira Kogawa, has been released to commemorate the 20th anniversary of Kyosho America. Featuring the works model specifications with gunmetal anodized aluminum and carbon fiber parts, this model combines a wide range of optional upgrades including new components to elevate its dynamic driving performance. With the same sharp low-profile body designed for the Optima Pro combining with the latest R/C engineering technology, the new Ultima ‘87 World Championship Spec lets you relive the cutting edge driving performance of that era, 37 years after its spectacular World Championship performance.

- Commemorating the 20th anniversary of Kyosho America, the World Championship Works 2WD buggy becomes the 17th release in the Kyosho Vintage Car series.
- Special components and unique colors distinguish this limited-edition reproduction of the 1987 World Championship winning model.
- Features a wide variety of optional parts that were previously optional upgrades at a great value price compared to individual purchase.
- While following the original design from 1987, each part has been updated to match modern R/C systems and power sources.
- All rods are turnbuckle type, making it easy to adjust camber and toe angles.
- Full bearing specification, even in the servo saver.
- Dial-adjustable oil shocks allow for easy vehicle height adjustment.
- Unassembled kit requires R/C system, motor and batteries.

Rear motor mounted 2WD buggy produces excellent driving stability with its high-strength aluminum monocoque chassis anodized in limited edition gunmetal color in combination with a newly designed hybrid carbon upper plate.

Recognised for its stylish form and superior aerodynamics, the included Optima Pro body features a special Kyosho America 20th anniversary decal set with cut lines matched to the Ultima.

Large capacity oil shocks feature titanium coated shafts for smooth function and durability plus dial adjustable chassis height. Shock caps and cases are finished in the Kyosho Works signature gunmetal color.

Carbon fiber shock stays are included as standard and absorb the feedback from the road surface to ensure maximum suspension effectiveness. These were an optional upgrade on the original.

Engraved with a logo commemorating Kyosho America’s 20th anniversary, the aluminum motor guard is also finished in gunmetal and protects the motor from crash damage.

Gear shaft and slipper plate are made from aircraft-grade 7075 Duralumin. Not only effective in reducing weight of the drive system and overall chassis, they also combine with the HD final pinion gear to deliver superior acceleration and deceleration.

Ball differential unit delivers smooth cornering and sharp acceleration even on low grip off-road surfaces. This latest Ultima incorporates components that were previously optional upgrades.

Universal swing shafts ensure motor power is efficiently transferred to the rear wheels, not only improving drive efficiency but also minimizing the risks of parts falling off after jump landings.

Moderate flexibility in the nylon resin rear wing provides excellent crash resilience. The large side plates increase the wing’s downforce and are the same as the JJ Ultima.

High-grip soft compound front and rear tires combine with wheels molded in Kogawa’s (designer of the Ultima) signature peppermint green, which are unique to this limited edition.

<Technical Data>

- Length: 370mm
- Width: 244mm
- Height: 106mm
- Wheelbase: 260-263mm
- Tread (F/R): 206mm / 208mm
- Tire(F/R): 75f x 20mm / 82f x 36mm
- Gear Ratio: 8.64:1
- Weight: approx. 1,500g
- Motor: 540 class size

<Contents>

- Pre-assembled kit
- Polycarbonate clear body
- Decals
- Chassis parts
- Cross wrench
- Shock wrench
- Grease

<Required for Operation>

- 2ch 1 servo R/C system for cars
- 540 class motor
- ESC compatible with motor used
- Battery for chassis compatible with ESC used
- Battery charger
- Paint for polycarbonate body
- Batteries for transmitter

The sensation is set to shock the world again!
ULTIMA becomes the 8th model in the Kyosho Vintage Series

The impact of the ULTIMA’s dominantTQ & 1-2-3 finish in the 2WD class at the 2nd Electric Off Road World Championship in England in 1987 was felt across the RC car scene. Now Kyosho’s famous ULTIMA turns back the clock with its return as the 8th model in the Kyosho Vintage Series! Now Kyosho’s famous ULTIMA turns back the clock with its return as the 8th model in the Kyosho Vintage Series! First released in 1986, the 2WD ULTIMA channeled racing tech from the OPTIMA into an electric racing buggy whirlwind that swept across the world. Consistent with the Vintage Series, the 2019 ULTIMA version has evolved in design and build to satisfy performance standards for modern R/C racing circuits and power sources. For example, the monocoque frame is made from aircraft grade A60601T6 aluminum alloy and multi-pin block pattern rear tires deliver optimal performance on modern off-road tracks. Full ball bearing specs minimize drive loss and combine with high-durability sintered alloy metal gears, slipper clutch and motor guard to protect the drive system while crash-resistant resin rear wing is also included. Relive the nostalgia of the ULTIMA’s glory with the 2019 version that has evolved into a modern-day racing machine that lets you drive like a world champion. - ULTIMA has been faithfully recreated, with component upgrades for compatibility with modern power sources.
- Polycarbonate body with driver cockpit recreates the style and atmosphere of the original ULTIMA.
- Full ball bearing specifications (14)
- Equipped with battery guard that prevents battery short circuit during a crash.

A monocoque frame made from tempered A6061T6 pressed clear anodized aluminum alloy used for aircraft manufacture combines with a glass reinforced resin upper deck to deliver light weight and durability for hard driving. The battery stay is compatible with all battery types and uses a hook & loop fastener (includes battery strap printed with KYOSHO logo) for easy battery mounting.

Front and rear double wishbone suspension adopts the proven OPTIMA design. Similar front-rear geometry ensures handling stability at all speed ranges. Impact-resistant nylon lower arm combines with metal rod upper arm to enable camber adjustment. Upgrade with optional titanium adjust rod 38mm (No.92413) for both front and rear.

The same large capacity 12mm diameter oil shocks as the OPTIMA deliver superior running stability over uneven surfaces. Long type nylon resin molded shock tower enables tuning for modern RC racing circuits. Upgrade with optional gold shocks OTW128 (F) and OTW129 (R).

Optimized geometry with aluminum steering link and metal bushings in combination with the servo saver incorporating aluminum pipe and metal spring design used in current racing buggies, delivers stable and precise steering feel. Upgrade with optional ball bearings and titanium adjust rod 50mm (No.92416).

Toe angle settings on the rear hub carriers can be set to 1.0°, 2.0°, 2.5°by replacing resin bushings. Detailed settings can be adjusted according to the specific racing conditions.

Gear module has been changed to 48-pitch from the original model’s 8-pitch to deliver reduced drive loss. In addition to the newly designed 46 nylon 57T 1st gear, all other gears are upgraded to the sintered metal gears from the OPTIMA. Upgrade with optional diff OTW101 to improve driving feel.

Gearbox is equipped with slipper clutch to protect the gearbox and drive system from sudden load changes such as jump landings. Easy to adjust and adaptable to various racing conditions. Upgrade with optional slipper pad (SCW021 HD) for compatibility with higher power and hard driving.

Included motor guard (was only available as optional upgrade on the original ULTIMA) is made from A6061T6 material and delivers increased durability. Resin wing mount provides choice of 2 height settings and angle can be set between 3 ° - 6 ° with shims. Previously made from polycarbonate, the resin wing delivers improved crash resistance. In addition to white, there are 5 color options to add extra style to your machine.

Rear tires feature optimized multi-pin pattern to produce stable grip on a wide variety of surfaces and have been recreated in the image of the original hard block tires. Upgrade with optional OTT244S (Soft) and OTT244H (hard) tires. High rigidity one-piece wheels replace the 50mm three-piece wheels of the original Ultima. In addition to white, there are 3 color options to choose from.

30623 KIT + 37034 Kyosho Le Mans 240 Gold BLS Motor 13.5 Legendary Serie + 37051B Kyosho Le Mans 240S BLS ESC 60A - Legendary Series

At the 1987 Electric Off-Road Car World Championship in the UK, the prototype Optima Mid dominated the 4WD A-Main final race securing 5 out of 10 starting positions. Following its success, the Optima Mid was commercialized to achieve worldwide racing acclaim. In 1988, the Turbo Optima Mid Special was released in limited quantities as the final evolution of the Optima Mid and sold out instantly due to overwhelming demand. Now, this legendary machine returns in 2025 as Volume 18 of Kyosho's Vintage Series. The original Turbo Optima Mid Special featured an 18mm longer wheelbase than the Optima Mid, enhancing high-speed stability and cornering performance. Its main chassis was designed for improved battery weight distribution and constructed from FRP sandwiched between carbon plates, striking an optimal balance of flexibility and rigidity. The belt and belt cover were also specifically designed for the Turbo Optima Mid Special, and the body was newly created to match the chassis. This faithful reproduction retains all these defining features while incorporating updates to support modern power systems and R/C electronics. Previously optional parts are now included as standard, along with several newly developed components. Unlike the original, this is not a limited edition but a permanent addition to Kyosho’s catalog. The return of the Turbo Optima Mid Special to modern circuits is a dream come true for all fans, whether they were lucky enough to own the original, or missed out due to its limited production. Now anyone can drive the ultimate evolution of the Optima!

• The 18th model in the Kyosho Vintage Series faithfully recreates the legendary Turbo Optima Mid Special. The original limited edition released in 1988 sold out almost immediately.
• Eight new parts were specifically designed for the Turbo Optima Mid Special.
• While maintaining the original design, updates have been made to support modern R/C electronics and power sources.
• High-efficiency belt-drive 4WD system delivers stability and smooth control on both R/C circuits and dirt tracks.
• 48-pitch pinion and spur gears are used, with the option to install 78T/80T spur gears.
• Equipped with reinforced slipper clutch designed for powerful motors and batteries. Can be adjusted with the dual slipper seat from the Ultima RB.
• Included battery holder is compatible with various battery shapes. By trimming part of the main chassis, side-by-side Nickel-Metal Hydride (NiMH) or Nickel-Cadmium (NiCd) batteries can be mounted.
• The reinforced nylon rear wing provides a balance of strength and flexibility, and is shared with the previously released Optima Mid. It can also be swapped with a Scorpion-style wing for further tuning.
• The rear hub carrier allows adjustment of toe angles to 0°, 1°, or 2° by changing the bushings.
• Aluminum hex wheel hubs are securely fixed with screw pins.
• Drivetrain features full ball bearings, ensuring high rotational efficiency.
• Blister-style packaging, similar to the original release, evokes nostalgia from that era.
• With a wide range of optional parts, this model offers extensive tuning options. This model is not just a simple remake – it's ready to be enjoyed as a modern-day racer!

New Features:

• Hybrid Carbon Chassis!! Long Wheelbase design (18mm longer)!
• Front and Rear ball diffs!! OTW101C
• Front universal swing shafts! OTW125C
• New narrow front tire and wheel design!!
• Turbo Optima Mid Special body and under body!! Rear molded plastic wing (Optima Mid)!!
• Threaded Oil Filled Shocks!! New medium hard springs!!
• Gunmetal anodized aluminum Motor mount, suspension plate,. Steering ring and other parts!
• Servo saver with ball bearing!!

Technical Data

• Length: 397mm
• Width: 250mm
• Height 135mm
• Wheelbase: 273mm
• Tread (F/R): 212mm/208mm
• Tire Diameter (F/R): φ82mm / φ82mm
• Tire width (F/R) : 30mm / 36mm
• Gear Ratio: 8.28 : 1
• Weight: 1620g (When equipped with GAB4202)

Kit Contents

• Chassis
• Tire
• Wheel
• Clear body＆underbody
• Decals
• Hexagon wrench
• Cross wrench
• Shock wrench
• Grease
• Shock
• Motor
• ESC

Required for Operation

• 2 Channel R/C System
• 1 Standard Size Servo
• 7.2V NiMh Battery or 2S Li-Po pack (ESC needs to be compatible)
• Suitable Battery Charger
• Paint for Body

At the 1987 Electric Off-Road Car World Championship in the UK, the prototype Optima Mid dominated the 4WD A-Main final race securing 5 out of 10 starting positions. Following its success, the Optima Mid was commercialized to achieve worldwide racing acclaim. In 1988, the Turbo Optima Mid Special was released in limited quantities as the final evolution of the Optima Mid and sold out instantly due to overwhelming demand. Now, this legendary machine returns in 2025 as Volume 18 of Kyosho's Vintage Series. The original Turbo Optima Mid Special featured an 18mm longer wheelbase than the Optima Mid, enhancing high-speed stability and cornering performance. Its main chassis was designed for improved battery weight distribution and constructed from FRP sandwiched between carbon plates, striking an optimal balance of flexibility and rigidity. The belt and belt cover were also specifically designed for the Turbo Optima Mid Special, and the body was newly created to match the chassis. This faithful reproduction retains all these defining features while incorporating updates to support modern power systems and R/C electronics. Previously optional parts are now included as standard, along with several newly developed components. Unlike the original, this is not a limited edition but a permanent addition to Kyosho’s catalog. The return of the Turbo Optima Mid Special to modern circuits is a dream come true for all fans, whether they were lucky enough to own the original, or missed out due to its limited production. Now anyone can drive the ultimate evolution of the Optima!

• The 18th model in the Kyosho Vintage Series faithfully recreates the legendary Turbo Optima Mid Special. The original limited edition released in 1988 sold out almost immediately.
• Eight new parts were specifically designed for the Turbo Optima Mid Special.
• While maintaining the original design, updates have been made to support modern R/C electronics and power sources.
• High-efficiency belt-drive 4WD system delivers stability and smooth control on both R/C circuits and dirt tracks.
• 48-pitch pinion and spur gears are used, with the option to install 78T/80T spur gears.
• Equipped with reinforced slipper clutch designed for powerful motors and batteries. Can be adjusted with the dual slipper seat from the Ultima RB.
• Included battery holder is compatible with various battery shapes. By trimming part of the main chassis, side-by-side Nickel-Metal Hydride (NiMH) or Nickel-Cadmium (NiCd) batteries can be mounted.
• The reinforced nylon rear wing provides a balance of strength and flexibility, and is shared with the previously released Optima Mid. It can also be swapped with a Scorpion-style wing for further tuning.
• The rear hub carrier allows adjustment of toe angles to 0°, 1°, or 2° by changing the bushings.
• Aluminum hex wheel hubs are securely fixed with screw pins.
• Drivetrain features full ball bearings, ensuring high rotational efficiency.
• Blister-style packaging, similar to the original release, evokes nostalgia from that era.
• With a wide range of optional parts, this model offers extensive tuning options. This model is not just a simple remake – it's ready to be enjoyed as a modern-day racer!

New Features:

• Hybrid Carbon Chassis!! Long Wheelbase design (18mm longer)!
• Front and Rear ball diffs!! OTW101C
• Front universal swing shafts! OTW125C
• New narrow front tire and wheel design!!
• Turbo Optima Mid Special body and under body!! Rear molded plastic wing (Optima Mid)!!
• Threaded Oil Filled Shocks!! New medium hard springs!!
• Gunmetal anodized aluminum Motor mount, suspension plate,. Steering ring and other parts!
• Servo saver with ball bearing!!

Technical Data

• Length: 397mm
• Width: 250mm
• Height 135mm
• Wheelbase: 273mm
• Tread (F/R): 212mm/208mm
• Tire Diameter (F/R): φ82mm / φ82mm
• Tire width (F/R) : 30mm / 36mm
• Gear Ratio: 8.28 : 1
• Weight: 1620g (When equipped with GAB4202)

Kit Contents

• Chassis
• Tire
• Wheel
• Clear body＆underbody
• Decals
• Hexagon wrench
• Cross wrench
• Shock wrench
• Grease
• Shock

Required for Operation

• 2 Channel R/C System
• 1 Standard Size Servo
• ESC x 1
• 540 size brushed motor recommended)
• 7.2V NiMh Battery or 2S Li-Po pack (ESC needs to be compatible)
• Suitable Battery Charger
• Paint for Body

Even more competitive, even more cool…
Recreation of the original, but updated with the latest racing tech!

<Technical Data>

- Length 395mm
- Width 244mm
- Height 120mm
- Wheelbase 260mm
- Front Tread 208mm
- Rear Tread 208mm
- Weight 1,600g (approx.)
- Tires (F/R) φ82×36mm
- Motor 540 class size (sold separately)
- Gear ratio 9.24 : 1

<Contents>

- Kit chassis
- Decals
- L-shaped hexagon wrench
- Cross wrench
- Shock wrench
- Shock oil
- Grease

<Required for Operation>

- 2 channel R/C system (servo x 1, ESC x 1)
- 540 motor (27T-20T recommended)
Brushless motor specifications: No.37031 Le Mans 240S Brushless motor 19.5T, No. 37051 Le Mans 240S ESC (60A/MAX 13.5 turn)
Brushed motor specifications: No.37021 Le Mans brushed motor 30T, No. 82245 KA060-91W ESC
- Battery (7.2V NiMH battery or 7.4V Li-Po battery)
- Battery charger (DC 12V regulated power supply)
- Paint tools for body painting
- Batteries for transmitter
- Tools (1.5/2.0/3.0mm hex wrench screwdriver, needle nose pliers, curved scissors, cutter. When replacing servo horn Phillips screwdriver may be required)

After the dynamic impact of the Optima was felt across the R/C racing scene, the Turbo Optima launched in 1986 as the strongest machine in the series. Until now. In addition to large diameter tires, large capacity pressure shocks, front & rear stabilizers and Le Mans 240S motor, the immortal Turbo Optima has modernized for 8.4V power and makes its debut as the 7th model of the vintage series. Key components of the Turbo Optima chassis have been redesigned to meet the demands of modern racing conditions and power sources, and share DNA with the Optima and Javelin. The new Turbo Optima is not simply a reproduction of the original and includes gold anodized parts that were optional upgrades on the original, gold shocks with dial adjustment of chassis height and new modern block pattern tires. Higher specs and design features deliver modern performance standards and visual impact that captures the magic of the original. - While a faithful reproduction the original Turbo Optima, each key performance component has been revised for compatibility with modern power sources.
- 4WD belt drive. Pulley for chain is also included in the kit so purchase of an optional chain can change the drive system.
- Equipped with FRP radio plate that is compatible with major brand ESC’s (speed controllers).
- Three toe angle settings ( 0°, 1°, 2°) can be used by inserting resin bushes into the rear hub carrier.
- Modernized aluminum hexagon wheel hubs can be securely fixed with set screws.
- Equipped with metal counter gear.
- Full ball bearing specifications (18 bearings).
- Includes separate helmet and polycarbonate body.
- Battery stays are compatible with various modern batteries and secured with hook and loop fasteners (battery strap with KYOSHO logo) for easy removal of battery.
- Hex screws used for assembly provide secure construction.

Nylon pipe frame and aluminum rooftop form a high strength roll cage body structure. Includes large bumper similar to the original design as well as a mini bumper suitable for racing.

New large size wing and wing stay is made from reinforced nylon material. The original Javelin wing was mounted on the roll cage directly. The new wing stay is now separate from the roll cage adding more durability and the wing is fixed with body clips for easier maintenance. The wing mounting position is the same as the Scorpion series allowing installation of the smaller wing used for the Scorpion onto the new Javelin.

Two drive system selections: chain drive or belt drive.

The gearbox is equipped with a slipper clutch to protect the drive system from sudden load changes such as jump landings. It can respond to various road conditions with simple adjustments.

Main chassis, shock stay and plates are made from 6061T6 aluminum alloy for corrosion resistance and increased strength. Countersunk flat head and tapping screws realize flush finish and reduce the number of nuts used.

While faithfully replicating the original 1986 design, the oil shocks on the new version lift performance potential with stainless steel shafts on front and rear and aluminum cylinders with outer diameter increased from φ10 mm to φ12 mm.

Shock resistant nylon double wishbone suspension with long stroke delivers superior durability and running stability in combination with the increased bore of the oil shocks.

Replace resin bushes on the rear hub carriers to chose from three different toe angles (0°, 1°, 2°). Aluminum hexagonal wheel hubs can be fixed with set screws.

While staying true to the Javelin’s original design, tires feature more pins and a revised compound to ensure increased grip. Includes lightweight chrome dish-type wheels.

The legend returns…
Javelin. A machine that redefines what it means to be the best.

<Technical Data>

- Length 403mm
- Width 240mm
- Height 130mm
- Wheelbase 260mm
- Front Tread 204mm
- Rear Tread 204mm
- Weight 1,700g (approx.)
- Tires (F & R) φ86×40mm
- Motor 540 Class size（sold separately）
- Gear Ratio 9.24：1

• Assembled some parts kit chassis (gear box, oil shock are pre assembled)
  - Body frame
  - Decals
  - L-shape hexagonal wrench
  - Cross wrench
  - Shock wrench
  - Shock oil
  - Grease
• <Required for Operation>
  
  - 2 Channel R/C System (1 x servo, 1 x ESC)
  - 540 Motor (20T – 27T recommended) No.82140 EP Starter Pack (KT-231P, KR-331, VORTEX WP45A, G2X Motor)
  - Battery for motor (7.2V NiMH or Li-Po battery)
  - Charger for motor battery (stable 12V power supply required if using DC)
  - Paint for body
  - Batteries for transmitter
  - Tools (maybe required: 1.5 / 2.0 / 3.0 hexagonal wrench driver, needle nose pliers, wire cutters, box cutter, Philips screwdriver for replacing servo horn)
• 
  The Javelin’s design concept was to create “A machine that redefines what it means to be the best”. After more than 30 years since the original release in 1986, this electric off-road competition model has been recreated as the sixth model in the Kyosho Vintage Series. Incorporating a resin pipe-frame body resembling the innovative aluminum pipe frame body of the 1/8 scale Land Jump engine powered buggy, the new Javelin features the proven performance of double wishbone suspension with a narrow backbone-style skid frame that delivers ideal geometry for wide-angled steering. This combines with the Javelin’s superior sealed compartment 4WD chain-drive system to produce excellent performance and durability. At the heart of the external features that faithfully represent the image of the Javelin of 30 years ago, this Vintage Series version is packed with modern racing performance potential and is compatible with modern power sources. At the heart of the drive system is a counter gear equipped with slipper function and a final gear case made from metal to strengthen its load bearing capacity. The adoption of precision 48-pitch gear modules reduces power loss and the optimal combination of nylon and sintered alloy delivers both improved drive efficiency and reduced noise. In addition to chain drive, the drive system can also be changed to a belt system, which was optional in the original model. Also, the large diameter aluminum shocks, recreated in the original design, combine with long stroke suspension to deliver increased performance potential. Rediscover the joy of off-road buggy racing with the latest in racing technology and the nostalgic style of the ‘Javelin’.
  
  - Each part has been upgraded to correspond with modern power sources while retaining Javelin’s unique original design. - New updated heavy duty aluminum inner roll bar for increased durability. - The new wing stay is compatible with the Optima(requires some cutting of the PC body). - Rear wing has been changed to chassis mounting to generate high downforce. The pedestal parts have been included with insert nuts to keep the wing securely fixed. Incorporation of insert nuts into the pedestals delivers even more secure mounting. - Just like the original Javelin, white, pastel green and fluorescent yellow colored roll cage bodies and wings are available. Red and black colors are on plan. - The aluminum plate on the front area of the roll cage body is now securely fixed with screws adding rigidity to the body. - Simple yet high rigidity aluminum backbone type chassis. - Two types of drive system can be selected. The 4WD chain system with sealed compartment that took the world by storm, or the 4WD belt system that was later released as an option. - FRP radio plate is suitable for ESC’s of any brand. - One-piece wheels replicate the original stylish design while delivering a reduction in weight. - Full ball bearing specifications use 18 ball bearings. (chain drive system uses 16). - hex heads ensure easy use and fastening security. - Includes separate helmet and polycarbonate body. - Hook and loop fastener battery stay (including battery straps printed with Kyosho logo) is compatible with various batteries and allows easy installation and removal. - Equipped with metallic counter gear.

Nylon pipe frame and aluminum rooftop form a high strength roll cage body structure. Includes large bumper similar to the original design as well as a mini bumper suitable for racing.

New large size wing and wing stay is made from reinforced nylon material. The original Javelin wing was mounted on the roll cage directly. The new wing stay is now separate from the roll cage adding more durability and the wing is fixed with body clips for easier maintenance. The wing mounting position is the same as the Scorpion series allowing installation of the smaller wing used for the Scorpion onto the new Javelin.

Two drive system selections: chain drive or belt drive.

The gearbox is equipped with a slipper clutch to protect the drive system from sudden load changes such as jump landings. It can respond to various road conditions with simple adjustments.

Main chassis, shock stay and plates are made from 6061T6 aluminum alloy for corrosion resistance and increased strength. Countersunk flat head and tapping screws realize flush finish and reduce the number of nuts used.

While faithfully replicating the original 1986 design, the oil shocks on the new version lift performance potential with stainless steel shafts on front and rear and aluminum cylinders with outer diameter increased from φ10 mm to φ12 mm.

Shock resistant nylon double wishbone suspension with long stroke delivers superior durability and running stability in combination with the increased bore of the oil shocks.

Replace resin bushes on the rear hub carriers to chose from three different toe angles (0°, 1°, 2°). Aluminum hexagonal wheel hubs can be fixed with set screws.

While staying true to the Javelin’s original design, tires feature more pins and a revised compound to ensure increased grip. Includes lightweight chrome dish-type wheels.