TAMIYA - TS SPRAY PAINT - Ts36 Flourescent Red

These cans of spray paint are extremely useful for painting large surfaces. The paint is synthetic lacquer that cures in a short period of time. Each can contains 100ml of paint, which is enough to fully cover two or three 1/24 scale sized car bodies. Tamiya spray paints are not affected by acrylic or enamel paints; therefore, following an overall base coat, details can be added or picked out using enamel and/or acrylic paints. By combining the use of these three types of paints, the finishing of plastic models becomes simpler and more effective.

• Tamiya spray paint TS
• For best results - Use Tamiya Base Coats (Primer)
• Tamiya spray paints are not affected by acrylic or enamel paints
• Designed for ABS Plastics that do not need to flex. Is Typically a lacquer and glossy unless said otherwise.
• NOT for clear Lexan RC Car Bodies - Use PS Colours instead.
• Each can contains 100ml of spray paint
• Note: Tamiya TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells and should not be mixed with PS paints, else they may react together.

For best results, warm can to room temp, shake well before use and after warming up. 

We are not held responsible for paint errors - always test spray can works correctly before use on model. Use a test piece to practice. Do not spray directly, start or stop on the model. Press - pass the model - release. For best results, spray no closer than 20cm away from model. Allow to dry between coats.