1/10 RC Car Bodies Instock

Bittydesign M410 190mm Clear TC bodyshell - Light

BD-TC-190M410 Bittydesign M410 190mm Clear TC bodyshell - Light

410, a new excellence for the 1/10 TC EP division
The M410 project includes all our experience and know-how gained in over 10 years of presence on the racetrack, designed with the collaboration of a car designer renowned internationally and tested with the help of our worldwide team drivers who participated in the development of a product that look stunning and with performance at the top of the class.

Tested for several months both indoor and even outdoor on different types of carpet and tarmac, the M410 body shell represent a new reality for drivers all around the world who race at top levels and always pretend to obtain the best result with their models.

Designed to Win #P1
The M410 is the lighest of the lightweight shells on the market! To win the weight of the body plays a key role and thanks to a new material and a new thermoforming process the M410 "ready to race" is at the top with just 85-86gr reducing the roll and the center of gravity of the model.

LIGHTNESS and STRENGTH!

Thanks to an excellent production process which guarantees a high homogeneity of the material in any area of the body we have reached a good compromise between weight and durability of the product, several track tests have revealed excellent impact resistance, making the M410's extremely longevity.

Developed for maximum performance
During the design stage, the attention was focused not only on aesthetics but especially on the surfaces and forms designed to obtain the best possible performance.

The result is a body with an instantly recognizable look, the design of the front end creates a very fast entering that stay constant throughout the steering range while the rear end has been developed with shapes and Efra measurements which ensure a high stability and traction that make the model particularly easy to drive on all surfaces.

Features:
The body respect all the international specs necessary for the approval by the federations, its EFRA and IFMAR homologated.

• Made with high quality and genuine polycarbonate Lexan®
• Included in the kit a complete set of screw, nuts and large plastic washers to fix properly the rear wing
• Produced only Light Weight version, thickness of material 0,75mm
• Sold clear with protective film outside
• Included in the package a few decal sheets pre-cut and windows mask
• Track Guide for the use of the M410 body
• The following values offer an overview of the ideal conditions of use of the body according to the grip of the surface and its general handling.

The numbers below are meant as a progressive scale where 10 is a hypothetical maximum value.

Bittydesign P-GT3R 1/10 GT 190mm Clear Body

BD-GT-190PGT3R Bittydesign P-GT3R 1/10 GT 190mm Clear Body

Premium Quality first of all

Our philosophy leads us not to settle for mediocrity or speculation, for each project we always pursue the same common thread: the best or nothing. To obtain products that fully meet our expectations, we dedicate months of virtual design and rendering in order to allow us to evaluate any improvements or details to be corrected.

QUALITY without any compromise is the basis of everything we make, the P-GT3R body shell represents the perfect implementation of our philosophy that drives us to do better and that encourages us to make use of our know-how acquired in over 17 years of experience.

Bittydesign Engineering is synonymous with guarantee, authenticity and innovation.

3D CAD Design & Engineering

In order to respect our quality standards, we have not set any limits and we have realized the P-GT3R project with the use of the most advanced graphics and Cad design; this process guarantees a perfect execution of the forms and details that high-tech machinery realize with 5-axis CNC milling machines.

The product we deliver in the hands of the enthusiast represents the best available on the market today, we exploit and make full use of the most advanced technology to guarantee a result that represents at best the Italian excellence.

Features:

The body shell is UNIVERSAL and mounts on all 1/10 190mm models, the wing complies with the measures as per USGT regulation and can therefore be used at any race.

• Made with high quality and genuine polycarbonate Lexan®

• Included in the kit a complete set of screw, nuts and large plastic washers to fix properly the rear wing

• Produced only in Light Weight version

• Fit all the 190mm electric chassis on the market with 258-260mm wheelbase

• Sold clear with protective film outside

• Included in the package a decal sheet pre-cut and windows mask

Racing and realistic look, all in one!

The shapes inspired by a GT3 racing car have been adapted to the measurements necessary for use with the 190mm electric models; the design phase took several months to finish every single particular, the attention to detail was obsessive in order to propose a body that could optimize aerodynamics and at the same time remain real in its proportions and aesthetics.

P-GT3R will surprise you from any perspective you look at it, his race style it's so awesome that it will leave you speechless everytime you will use it.

Please Note: Body comes supplied clear and will require painting. Painted images are for illustration only.

Bittydesign HC-M M Class 210-225mm Clear Bodyshell

BD-FWD-HCM Bittydesign HC-M M Class 210-225mm Clear Bodyshell

HC-M, a new body for the 1/10 M-chassis FWD class

The HC-M project was born from the desire to offer to all the rc enthusiast a new top quality body shell for the M-chassis cars with 210-225mm wheelbase. Tested for several months the product combine a stunning realistic aesthetic together with performance at the top of the class.

Designed to Win #P1

The HC-M body shell represent a new reality for drivers all around the world who always push to obtain the best result with their models.

Thanks to the collaboration with our experienced European and Asian team drivers we have been able to follow and realize valuable suggestions that have allowed us to adopt some changes to the initial project necessary to greatly improve the driving precision and reduce the rolling of the model caused by the high roof of the body.

Italian Pure Excellence

The design recalls the forms of the "queen" of real scale front-wheel drive cars produced in Japan, the refinement phase took several months to optimize every detail, the attention to particulars has been obsessive in order to propose a body that could exalting the performance of the Japanese car at its best.

 HC-M is a body with a breath-taking look that we offer in the Racing version with widened wheel arches in order to guarantee a better aerodynamic performance optimized both thanks to the large front splitter and thanks to the specially designed wing that generate rear stability and traction as well it makes the model balanced and easy to drive.

Product Features

The body it's UNIVERSAL and fit all the 1/10 M-chassis cars on the market with 210-225mm wheelbase; can be mounted on the 4WD chassis as well on the cars with front wheel drive (2WD).

• Made with high quality and genuine polycarbonate Lexan®
• Included in the kit a complete set of screw, nuts and large plastic washers to fix properly the rear wing
• Produced in Light Weight version, thickness of material 0,75mm
• Sold clear with protective film outside
• Included in the package a decal sheet and windows mask

3D Cad design & engineering

In order to respect our quality standards, we have not set any limits and we have realized the HC-M project with the use of the most advanced graphics and Cad design; this process guarantees a perfect execution of the forms and details that high-tech machinery realize with 5-axis CNC milling machines.

The product we deliver in the hands of the enthusiast represents the best available on the market today, we exploit and make full use of the most advanced technology to guarantee a result that represents at best the Italian excellence.

Bittydesign A3-F 1/10 FWD 190mm Wheelbase Body

BD-FWD-190A3F Bittydesign A3-F 1/10 FWD 190mm Wheelbase Body

BRCA Homologated.

This project was born from the desire to create a new body that could gather the experience accumulated with our previous FWD bodies but with different aerodynamic solutions in order to obtain the maximum possible performance for this category.

Thanks to the aerodynamics fine-tuned to obtain excellent entry and smoothness when cornering, you will immediately feel a very positive driving feeling that will allow you to push the pace and maintain it for the entire 5 minutes. A3-F is a truly consistent body and will allow you to improve performance easily.

Premium Quality first of all

Our philosophy leads us not to settle for mediocrity or speculation, for each project we always pursue the same common thread: the best or nothing. To obtain products that fully meet our expectations, we dedicate months of virtual design and rendering in order to allow us to evaluate any improvements or details to be corrected.

QUALITY without any compromise is the basis of everything we make, the A3-F body shell represents the perfect implementation of our philosophy that drives us to do better and that encourages us to make use of our know-how acquired in over 18 years of experience.

Bittydesign Engineering is synonymous with guarantee, authenticity and innovation.

Designed for maximum performance

The shapes inspired by a real car have been adapted to the proportions and measurements necessary for use with the 190mm electric models; the design phase took several months, the attention to details was obsessive in order to propose a body shell that could optimize aerodynamics while remaining faithful to the original shapes.

If the main intent was that of performance alone at the expense of aesthetics, the finished project resulted in a body with a breathtaking look, with TCR-style widened wheel arches and a harmony of shapes and proportions that make the A3-F both pleasing to the eye and extremely high-performing.

Blue Prints for the Painters!

To allow artists who are passionate about painting, amateurs or professionals alike, to draft your graphics before moving on to airbrushing, we provide the Blue Prints of the A3-F body shell.

By downloading the pdf file you will have the 4 different perspectives of the images alongside, you can easily print them on A4 paper and draft the graphics to be created for your personal use or send a preview of the design to your customers. You can download this from the Download tab.

3D Cad design & engineering

In order to respect our quality standards, we have not set any limits and we have realized the A3-F project with the use of the most advanced graphics and Cad design; this process guarantees a perfect execution of the forms and details that high-tech machinery realize with 5-axis CNC milling machines.

The product we deliver in the hands of the enthusiast represents the best available on the market today, we exploit and make full use of the most advanced technology to guarantee a result that represents at best the Italian excellence.

Features:

The body shell is UNIVERSAL and mounts on all 1/10 190mm FWD (also Touring 4WD as well ) models.

• Made with high quality and genuine polycarbonate Lexan®
• Produced in Light Weight version and Ultra Lite (ULT)
• Fit all the 190mm electric chassis with 257-260mm wheelbase
• Sold clear with protective film outside
• Included in the kit a complete set of screw, nuts and large plastic washers to fix properly the rear wing
• Included in the package a decal sheet pre-cut and windows mask

Please Note: Body comes supplied clear and will require painting. Painted images are for illustration only.

Sold as seen, appears to have no real cracks and have untested lights fitted 

GOAT is ZooRacing´s new high-performance touring car body. Developed from the experience from the super successful Dogsbollox body, but a more compact and shorter design to generate more rotating for a more fluent driving.

Key areas, like the new, shorter nose- and hood design are optimized and the also the rear section is more compact and much lower to make cornering faster and have a stable rear at the same time.

The new and more pronounced rear spoiler generates more downforce, what gives the car more stabillity when exit corners. The more homogeneous airflow behind the roof reduces drag and turbulences. New inverted fin design on the trunk reduces turbulences and increases static stability at the rear section and results a better approach flow to the new curved designed rear wing.

The rear wing design is curved according the body lines and has a stepped design to improve stability. The result is less flex and more downforce on high speeds.

The handling of the GOAT body is less agressive, than the Wolverine and rotates better, than the Dogsbollox and produces a well ballanced side bite. Perfect for tracks with low to medium grip and modified racing. The GOAT is Great On All Terrains!

On top of that all is the ZOOlite moulding process that reduces the overall weight of our standard thickness 0.7mm body shells by about 10g. This ensures the standard shells are legal for all races with minimum body weight rules, while significantly lowering the overall center of gravity. In addition, GOAT is also available in our proven, Ultralight 0.5mm variant for everyone looking for the outmost of performance. 

With the GOAT, ZooRacing introduces the new 0.4mm AIRlite material. This ist he lightest material by far we ever made for touring car bodies. We recommend this material only for super high grip trackst to reduce tractions rolls and/or tire waste. AIRlite material bodies are mostly faster, but the lifetime of the body is definitely limmited.

Part of the package is a window mask decal set and a high-quality wing mounting hardware and a detailed sticker sheet including grille, head and taillights.

Features:

- CAD designed - Specialized LCG body shell with a more realistic design and less aerodynamic drag - Low, and yet realistic front end with sculptured hood and grille details - Updated Dogsbollox-style roof section for less aerodynamic drag and higher cornering speeds - Recessed roof to channel the airflow and to create greatly improved structural stability thanks to static reinforcement - Structured rear end for anti-tuck capabilities - Large wheel arches allow the body to be placed 4mm front or back (8mm in total) - Large wheel arches ensure the tires will not rub in whatever position - Anti-tuck capabilities with structured side skirts - Static reinforcement on the hood. Especially useful when running the ultra lightweight variant

- ZOOlite 0.7mm standard body weighs in at about 75g cut & including wing - 0.5mm body weighs in at about 55g cut & including wing

- AIRlite 0.4mm weighs in at about 45g cut & including wing - Detailed decal sheet - Window masks - Wing mounting hardware - 100mm grid on the rear truck lid for easy and convenient body mounting - Designed to meet GBS rules

The AGATA project was born from the desire to offer to the rc enthusiast all over the world a body shell that could recall our origins, Emilia land of engines and dream car manufacturers.

Tested over several months on different carpets and asphalts, the body is a new alternative for drivers who not only aim for pure performance but also seek an aesthetic satisfaction fully satisfied by the unique shapes and lines of AGATA.

The AGATA project represents the highest level in the RC industry in terms of development and engineering. We haven't set any limit and with the help of expert team of engineers we have developed a brand new product that features amazing details in terms aesthetic and aerodynamic. 

A parternship with Italian leading CNC factory allowed to obtain the maximum level of precision and quality possible today; we are proud supporters of the real Made in Italybased on the creation, passion and pure innovation.

The design recalls the shapes of the dream-car produced in Emilia, the phase of refinement took several months to optimize every detail, the search of perfection has been obsessive in order to propose a body that could honor our Italian excellence.

AGATA is a GT body with a stunning look, the lowered front nose generates an excellent steering while the wide cab and the neutral sides stabilize the air flows that conveyed into the large rear wing make the model easy to drive, the body is well balanced and does not undermine the set-up of your car.

The body shell meet the specifications needed to participate in any 1/10 GT race in the world, USGT class included.

• Made with high quality and genuine polycarbonate Lexan®
• Included in the kit a complete set of screw, nuts and large plastic washers to fix properly the rear wing
• Front foam (laser cut) to avoid the vibration of the front nose of the body included into the kit
• Produced in Light Weight version, thickness of material 0,75mm
• Sold clear with protective film outside
• Included in the package a decal sheet pre-cut and windows mask

The AGATA project was born from the desire to offer to the rc enthusiast all over the world a body shell that could recall our origins, Emilia land of engines and dream car manufacturers.

Tested over several months on different carpets and asphalts, the body is a new alternative for drivers who not only aim for pure performance but also seek an aesthetic satisfaction fully satisfied by the unique shapes and lines of AGATA.

The AGATA project represents the highest level in the RC industry in terms of development and engineering. We haven't set any limit and with the help of expert team of engineers we have developed a brand new product that features amazing details in terms aesthetic and aerodynamic. 

A parternship with Italian leading CNC factory allowed to obtain the maximum level of precision and quality possible today; we are proud supporters of the real Made in Italybased on the creation, passion and pure innovation.

The design recalls the shapes of the dream-car produced in Emilia, the phase of refinement took several months to optimize every detail, the search of perfection has been obsessive in order to propose a body that could honor our Italian excellence.

AGATA is a GT body with a stunning look, the lowered front nose generates an excellent steering while the wide cab and the neutral sides stabilize the air flows that conveyed into the large rear wing make the model easy to drive, the body is well balanced and does not undermine the set-up of your car.

The body shell meet the specifications needed to participate in any 1/10 GT race in the world, USGT class included.

• Made with high quality and genuine polycarbonate Lexan®
• Included in the kit a complete set of screw, nuts and large plastic washers to fix properly the rear wing
• Front foam (laser cut) to avoid the vibration of the front nose of the body included into the kit
• Produced in Light Weight version, thickness of material 0,75mm
• Sold clear with protective film outside
• Included in the package a decal sheet pre-cut and windows mask

190mm Wide / 256mm Standard 1/10 Car Wheelbase body for such as a Tamiya TT02.

Supplied unpainted - and may not match design, stickers might be limited to Lights & Grills. 

THIS IS THE LIGHTWEIGHT VERSION

BD-TC-190HYP Bittydesign HYPER HR 190mm Clear TC bodyshell - Light

HYPER-HR, a new contenderbody shell contender for the 1/10 190mm electric class

This project was born from the desire to further develop the first HYPER version by creating a new model similar in appearance but in fact totally redesigned to meet the needs of this ultra-competitive category.

The HYPER-HR body represents the best result of performance and aesthetics into the same product, a great mix with modern and aggressive look.

Premium Quality first of all

Our philosophy leads us not to settle for mediocrity or speculation, for each project we always pursue the same common thread: the best or nothing. To obtain products that fully meet our expectations, we dedicate months of virtual design and rendering in order to allow us to evaluate any improvements or details to be corrected.

QUALITY without any compromise is the basis of everything we make, the HYPER-HR body shell represents the perfect implementation of our philosophy that drives us to do better and that encourages us to make use of our know-how acquired in over 15 years of experience.

Bittydesign Engineering is synonymous with guarantee, authenticity and innovation.

Product Features

The body shell complies with all EFRA, IFMAR, ROAR, BRCA and FEMCA homologation specs, so it can be used in any National and International race.

• Made with high quality and genuine polycarbonate Lexan®
• Included in the kit a complete set of screw, nuts and large plastic washers to fix properly the rear wing
• Produced in Light Weight version as well also Ultra Lite (ULT)
• Fit all the 190mm electric chassis on the market with 257-260mm wheelbase
• Sold clear with protective film outside
• Included in the package a decal sheet pre-cut and windows mask

Made with one target: the excellence

The design, inspired by a real car and adapted to the measurements necessary for homologation took several months to optimize every single detail, the search of perfection has been obsessive in order to propose a body shell that could best enhance the aerodynamic study that the project involved.

HYPER-HR is a touring body with a modern look and that responds to market demand, in the course of several months of tests on the track, changes were made several times to the original project as we wanted to be sure to offer a product that could excel in the 190mm category, step by step we have reached an optimal level of performance and balance.

HYPER-HR redefines the concept of QUALITY.

You will be surprised by the precision and details of the body. HYPER-HR is made to amaze you.
HYPER-HR redefines the concept of QUALITY.
You will be surprised by the precision and details of the body. HYPER-HR is made to amaze you.
HYPER-HR redefines the concept of QUALITY.
 You will be surprised by the precision and details of the body. HYPER-HR is made to amaze you.
 3D Cad design & engineering

In order to respect our quality standards, we have not set any limits and we have realized the HYPER-HR project with the use of the most advanced graphics and Cad design; this process guarantees a perfect execution of the forms and details that high-tech machinery realize with 5-axis CNC milling machines.

The product we deliver in the hands of the enthusiast represents the best available on the market today, we exploit and make full use of the most advanced technology to guarantee a result that represents at best the Italian excellence.

190mm Wide / 256mm Standard 1/10 Car Wheelbase body for such as a Tamiya TT02.

Supplied unpainted - and may not match design, stickers might be limited to Lights & Grills. 

Bittydesign Eptron 1/10 TC 190mm body

Premium Quality first of all

Our philosophy leads us not to settle for mediocrity or speculation, for each project we always pursue the same common thread: the best or nothing. To obtain products that fully meet our expectations, we dedicate months of virtual design and rendering in order to allow us to evaluate any improvements or details to be corrected.

QUALITY without any compromise is the basis of everything we make, the eptron body shell represents the perfect implementation of our philosophy that drives us to do better and that encourages us to make use of our know-how acquired in over 15 years of experience.

Bittydesign Engineering is synonymous with guarantee, authenticity and innovation.

Product Features

The body shell complies with all EFRA, IFMAR, ROAR, BRCA and FEMCA homologation specs, so it can be used in any National and International race.

• Made with high quality and genuine polycarbonate Lexan®
• Included in the kit a complete set of screw, nuts and large plastic washers to fix properly the rear wing
• Produced in Light Weight version as well also Ultra Lite (ULT)
• Fit all the 190mm electric chassis on the market with 257-260mm wheelbase
• Sold clear with protective film outside
• Included in the package a decal sheet pre-cut and windows mask

This is a spare body set of the Toyota Gazoo Racing WRT/Yaris WRC. The body is made of polycarbonate and is designed to fit Tamiya’s 190mm rally car machines.

• The Yaris WRC body is made out of vacuum formed polycarbonate. Individual polycarbonate parts recreating front canards, front light cases and rear bumper blocks complete the package.
• Separately molded plastic components depict rear wing and side mirrors.
• Stickers are included to recreate markings, as are masking stickers for use when painting.
• Compatible with 257mm TT-01, TT-02 and XV-01 chassis cars.

This new body parts set provides GT-R fans the opportunity to design another great looking body for the ever beautiful Nissan Skyline GT-R (R32).

Width: 187mm, Length: 452mm, Wheelbase: 257mm.
Can be used with TT-01 and TT-01 Type-E chassis cars.
Wide treads on the rear of some chassis must be changed to narrow treads.
Not for use with short wheelbase chassis machines.

R/C Body Set

Universal Fit
Designed for 1/10 scale competition, features dimensions that ensure compatibility with all modern 1/10 RC chassis:

•Width: 190mm
•Wheelbase: 260mm (Typical Tamiya TT02 Size)

Technical Specifications
•Material: High-quality Premium Polycarbonate.
•Thickness: 0.75mm (optimized for the perfect balance of performance and durability).

The Kit Includes:
•Full set of high-definition decals.
•Window masks for easy painting.
•Rear wing mounting screws.

Supplied Clear.

FTX 1/10 TOURING/DRIFT CAR ROLLER CHASSIS ONLY

With so many aftermarket scale bodyshells, wheels, tyres and more now available for 1/10th on road cars, demand has been growing for raw rolling chassis so that users can assemble their perfect build.

So with this in mind, FTX have released the Banzai chassis as a raw rolling chassis ready for your choice of electronics, wheels, tyres and bodyshell from brands such as Killerbody, Fastrax, Etronix and more.

Featuring full ball bearings, front and rear differentials with internal metal gears, as well as metal crown and pinion gear. Front universal CVA style driveshafts, oil filled shock absorbers and fully adjustable suspension makes this platform the perfect choice for any self build touring, drift or rally car.

Features

• Moulded tub chassis
• 4wd shaft drive with slipper system
• Big bore oil filled adjustable shock absorbers
• Front and rear geared differentials
• Gearbox metal crown and pinion gear
• Front universal driveshafts
• Adjustable turnbuckles
• Adjustable suspension (droop, camber, toe-in & wheelbase)
• Foam front bumper
• Aluminium motor mount
• Full ball bearings throughout
• Wide range of aftermarket aluminium options

GOAT is ZooRacing´s new high-performance touring car body. Developed from the experience from the super successful Dogsbollox body, but a more compact and shorter design to generate more rotating for a more fluent driving.

Key areas, like the new, shorter nose- and hood design are optimized and the also the rear section is more compact and much lower to make cornering faster and have a stable rear at the same time.

The new and more pronounced rear spoiler generates more downforce, what gives the car more stabillity when exit corners. The more homogeneous airflow behind the roof reduces drag and turbulences. New inverted fin design on the trunk reduces turbulences and increases static stability at the rear section and results a better approach flow to the new curved designed rear wing.

The rear wing design is curved according the body lines and has a stepped design to improve stability. The result is less flex and more downforce on high speeds.

The handling of the GOAT body is less agressive, than the Wolverine and rotates better, than the Dogsbollox and produces a well ballanced side bite. Perfect for tracks with low to medium grip and modified racing. The GOAT is Great On All Terrains!

On top of that all is the ZOOlite moulding process that reduces the overall weight of our standard thickness 0.7mm body shells by about 10g. This ensures the standard shells are legal for all races with minimum body weight rules, while significantly lowering the overall center of gravity. In addition, GOAT is also available in our proven, Ultralight 0.5mm variant for everyone looking for the outmost of performance. 

With the GOAT, ZooRacing introduces the new 0.4mm AIRlite material. This ist he lightest material by far we ever made for touring car bodies. We recommend this material only for super high grip trackst to reduce tractions rolls and/or tire waste. AIRlite material bodies are mostly faster, but the lifetime of the body is definitely limmited.

Part of the package is a window mask decal set and a high-quality wing mounting hardware and a detailed sticker sheet including grille, head and taillights.

Features:

- CAD designed - Specialized LCG body shell with a more realistic design and less aerodynamic drag - Low, and yet realistic front end with sculptured hood and grille details - Updated Dogsbollox-style roof section for less aerodynamic drag and higher cornering speeds - Recessed roof to channel the airflow and to create greatly improved structural stability thanks to static reinforcement - Structured rear end for anti-tuck capabilities - Large wheel arches allow the body to be placed 4mm front or back (8mm in total) - Large wheel arches ensure the tires will not rub in whatever position - Anti-tuck capabilities with structured side skirts - Static reinforcement on the hood. Especially useful when running the ultra lightweight variant

- ZOOlite 0.7mm standard body weighs in at about 75g cut & including wing - 0.5mm body weighs in at about 55g cut & including wing

- AIRlite 0.4mm weighs in at about 45g cut & including wing - Detailed decal sheet - Window masks - Wing mounting hardware - 100mm grid on the rear truck lid for easy and convenient body mounting - Designed to meet GBS rules

Sold as seen. Has been raced, but very strong body and only chips. Much stronger than Tamiya bodies as made from 1mm high impact Lexan. Based on the Scania T-Cab Highline. 

Will fit any Tamiya TT01E 1/10 car or TT02. Will fit many others are is standard 256mm wheelbase and 190mm in width. Scale is 1/14th to match Tamiya Euro Truck Series. 

New from Xtreme Aerodynamics the Zenith 1/10th Touring Body.

A new body developed to combine precision, stability, control and performance in a more complete balance.

Includes decals, window masks and hardware.

Supplied clear.

EFRA/ETS Legal.

BRCA Pending.

(Photos may differ slightly from production model.

Standard 190mm wide body by 256mm wheelbase - will fit all 1:10 electric touring cars, such as a Tamiya TT02. Holes are pre drilled for a Tamiya TA08, but was never driven for more than a few laps. Has the very smallest mark on front, hard to see. No cracks. Pro airbrushed. Coated over £60.00 to make. 

From Mon-Tech the Mustang GT3: American Legend meets Mon-tech Racing Excellence.

(BODY ONLY! NO CAR, NO WHEELS ETC)

From the legendary tracks of the WEC in the GT3 category to the breathtaking battles of the Supercars Championship in Australia: the name Mustang is synonymous with pure power and motorsport history. Today, Mon-tech Racing is proud to present the scale replica of this racing icon.

A Technical Challenge Conquered
To faithfully reproduce the muscular lines and complex undercut details of the Mustang GT3, we pushed our technical limits. After months of rigorous design and testing, we developed a unique special mold. The result? A body shell with a level of detail and formal fidelity unprecedented in the RC world.

100% Proudly Made in Italy
Like every Mon-tech Racing creation, the new Mustang GT3 is conceived, designed, and manufactured entirely at our facility in Scandiano. This product carries all the quality and passion of true Italian technological craftsmanship.

Universal Fit
Designed for 1/10 scale competition, the Mustang GT3 features dimensions that ensure compatibility with all modern 1/10 RC chassis:

•Width: 190mm
•Wheelbase: 260mm (Typical Tamiya TT02 Size)

Technical Specifications
•Material: High-quality Premium Polycarbonate.
•Thickness: 0.75mm (optimized for the perfect balance of performance and durability).

The Kit Includes:
•Full set of high-definition decals.
•Window masks for easy painting.
•Rear wing mounting screws.

Supplied Clear.

The Avalon VORTEX is the new high-performance body from by Avalon Racing – developed and manufactured in Germany, specifically for use in 1/10 scale touring car racing. Designed using state-of-the-art 3D CAD technology and refined through extensive test drives by various drivers on different race tracks, the VORTEX sets new standards in terms of aerodynamics and driving dynamics.

At the heart of the Vortex lies a fundamentally new aerodynamic philosophy. The striking ducktail rear wing simultaneously reduces rotational inertia and generates strong, controllable downforce – for higher cornering speeds and more consistent lap times. The curved rear wing profile ensures optimal airflow and maximum rear stability, whilst the wide adjustment range of the rear wing allows for precise tuning to suit different track conditions, grip levels and driving styles . The high structural and geometric rigidity of the body efficiently transfers aerodynamic loads to the chassis.

Technical highlights at a glance

Maximum rotation and high cornering speed for a precise, direct driving experience
Innovative ducktail rear for improved grip and reduced rotational inertia
Curved rear wing profile for optimum aerodynamic downforce
High structural and geometric rigidity for efficient load transfer to the chassis
Short rear – specifically designed to minimise rotational inertia
BRCA, EFRA and IFMAR homologated

Technical data:

Scale 1:10
Width: approx. 190mm

Available in:
Lightweight 0.5 mm
Regular 0.7 mm

Supplied Clear.

INFO: NO screws or nuts for fitting the rear wing are included.

The Avalon VORTEX is the new high-performance body from by Avalon Racing – developed and manufactured in Germany, specifically for use in 1/10 scale touring car racing. Designed using state-of-the-art 3D CAD technology and refined through extensive test drives by various drivers on different race tracks, the VORTEX sets new standards in terms of aerodynamics and driving dynamics.

At the heart of the Vortex lies a fundamentally new aerodynamic philosophy. The striking ducktail rear wing simultaneously reduces rotational inertia and generates strong, controllable downforce – for higher cornering speeds and more consistent lap times. The curved rear wing profile ensures optimal airflow and maximum rear stability, whilst the wide adjustment range of the rear wing allows for precise tuning to suit different track conditions, grip levels and driving styles . The high structural and geometric rigidity of the body efficiently transfers aerodynamic loads to the chassis.

Technical highlights at a glance

Maximum rotation and high cornering speed for a precise, direct driving experience
Innovative ducktail rear for improved grip and reduced rotational inertia
Curved rear wing profile for optimum aerodynamic downforce
High structural and geometric rigidity for efficient load transfer to the chassis
Short rear – specifically designed to minimise rotational inertia
BRCA, EFRA and IFMAR homologated

Technical data:

Scale 1:10
Width: approx. 190mm

Available in:
Lightweight 0.5 mm
Regular 0.7 mm

Supplied Clear.

INFO: NO screws or nuts for fitting the rear wing are included.