1000s of products at one click
Monthly Deals & Discounts
Fast Cheap Post from £2.99
Free Postage on Orders Over £100
1000s of products at one click
Monthly Deals & Discounts
Fast Cheap Post from £2.99
Free Postage on Orders Over £100
1000s of products at one click
Monthly Deals & Discounts
Fast Cheap Post from £2.99
Free Postage on Orders Over £100
1000s of products at one click
Monthly Deals & Discounts
Fast Cheap Post from £2.99
Free Postage on Orders Over £100
1000s of products at one click
Monthly Deals & Discounts
Fast Cheap Post from £2.99
Free Postage on Orders Over £100
1000s of products at one click
Monthly Deals & Discounts
Fast Cheap Post from £2.99
Free Postage on Orders Over £100
-
RC Bodies
-
RC Chargers & Accessories
-
RC Motors, ESC & Combos
-
Paint & Accessories
-
Hardware, Gears, Lubes & Cleaning
-
Hobby Materials, Glue & Tools
Products
-
RC Bodies
-
RC Chargers & Accessories
-
RC Motors, ESC & Combos
-
RC Radio Gear
-
RC Pit Essentials
-
Paint & Accessories
-
Hardware, Gears, Lubes & Cleaning
-
Hobby Materials, Glue & Tools
-
Plastic Model Kits
-
Puzzles, Games & Crafts
-
Dolls Houses
Welcome to FROSTY MODELS SKEGNESS
-
Ready & Instock
- Ready & Instock
-
Instock Plastic Model Kits
-
Instock Radios, Servos & Receivers
Instock Motors, ESC's & Accessories
-
Shop-By-Brands
- Shop-By-Brands
-
Kyosho
-
Tamiya
-
TAMIYA RC SPARES - CARS
- Tamiya CC02 Spares & Hop-ups
- Tamiya TT02 Parts & Hop-ups
- Tamiya TT01E Parts & Hop-ups
- Tamiya M05 Parts & Hop-ups
- Tamiya M06 Parts & Hop-ups
- Tamiya M07 Parts & Hop-ups
- Tamiya M08 Parts & Hop-ups
- Tamiya MB01 / BT01 Parts & Hop-ups
- Tamiya AV & 0.6Mod Pinions
- Tamiya 0.8Mod Pinions
- Tamiya Spur Gears
- Tamiya Bearings
-
TAMIYA SPARES - BUGGIES
- Tamiya - Sand Rover 2011 Parts
- Tamiya - Astute 2022 Parts
- Tamiya - Avante Mk.II Parts
- Tamiya - Baja Champ Parts
- Tamiya - BBX Parts
- Tamiya - Baja King (Red) Buggy QD Parts
- Tamiya - Blazing Star Parts
- Tamiya - Blitzer Beetle 2011 Parts
- Tamiya - Boomerang 4WD 2008 Parts
- Tamiya - Buggy Champ 2009 Parts
- Tamiya - BB02 Spares
- Tamiya - Falcon Spares
-
Tamiya Model Kit Range
- TAMIYA 1/24 CARS
- TAMIYA 1/20 CARS
- TAMIYA 1/12 CARS
- TAMIYA 1/6 BIKES
- TAMIYA 1/12 BIKES
- TAMIYA 1/32 AIRCRAFT
- TAMIYA 1/48 AIRCRAFT
- TAMIYA 1/72 AIRCRAFT
- TAMIYA 1/48 MILITARY
- TAMIYA 1/16 MILITARY
- TAMIYA 1/35 MILITARY
- TAMIYA 1/350 SHIPS
- TAMIYA 1/700 SHIPS
- TAMIYA CATALOGUES
- TAMIYA DINOSAURS
- TAMIYA MERCHANDISE
-
Rlaarlo
-
Contact RC
-
HPI Racing
-
BATTCAVE
-
ARRMA
-
Pro-Boat
-
Schumacher Vehicles
-
Schumacher Cat
- Schumacher Spares Off Road
- Schumacher CAT K1
- Schumacher CAT K1 Aero
- Schumacher CAT XLS Masami
- Schumacher Bosscat
- Schumacher CAT L1
- Schumacher CAT L1 EVO
- Schumacher CAT L1R
- Schumacher CAT SX
- Schumacher CAT SX2
- Schumacher CAT SX3
- Schumacher CAT 98
- Schumacher CAT3000
- Schumacher CAT2000
- Schumacher CAT 2000 Classic
-
Schumacher Mission
- Schumacher Mi1
- Schumacher Mi1v2
- Schumacher Mi2
- Schumacher Mi2EC
- Schumacher Mi3
- Schumacher Mi3.5
- Schumacher Mi4
- Schumacher Mi4CX
- Schumacher Mi4CXL
- Schumacher Mi4LP Pro CF
- Schumacher Mi4LP Race S1
- Schumacher Mi5
- Schumacher Mi5 evo
- Schumacher Mi6
- Schumacher Mi6evo
- Schumacher Mi7
- Schumacher MI8
- Schumacher MI9
- Schumacher Mi10
- Schumacher Mission FT
-
Schumacher Discontinued Kits
- Schumacher Manic
- Schumacher Riot
- Schumacher Fusion21
- Schumacher Fusion 28 turbo
- Schumacher Big6 electric
- Schumacher Axis
- Schumacher Axis2
- Schumacher Fireblade EVO
- Schumacher Rascal
- Schumacher SST98
- Schumacher WildCAT
- Schumacher Havoc
- Schumacher Menace GTR
- Schumacher Menace21
- Schumacher GTRe
- Schumacher R12
- Schumacher Menace21
-
-
Xray
-
Raceway Menu
-
Company Info
Your cart
Choose your Location
-
Frosty Models - T/A Skegness Models & Raceway
Free Browsing & Collections
Usually ready for pickup in 1 hour if instock (See Store Hours)
Unit 6, Hawkins Business Park, Heath Road, Skegness, PE25 3ST (Opposite Arnalds Cafe)
Monday:
☀️ 09:30 – 12:00 Shop & Morning Track Session
🍽️ Closed for lunch
🌙 13:00 Shop & Afternoon Track Session – 18:00-21:00 (Race Night)
Tuesday:
☀️ 09:30 – 12:00 Shop & Morning Track Session
🍽️ Closed for lunch
🌆 13:00 – 16:00 Shop & Afternoon Track Session
Wednesday:
☀️ 09:30 – 12:00 Shop & Morning Track Session
🍽️ Closed for lunch
🌆 13:00 – 15:00 Shop & Afternoon Track Session
Thursday:
☀️ 10:00 – 12:00 Shop & Morning Track Session
🍽️ Closed for lunch
🌙 13:00 - 18:00 Shop & Afternoon Track Session 18:00 – 22:00 (Race Night)
Friday:
☀️ 09:00 – 10:30 Shop & Morning Track Session
🍽️ Closed for lunch
🌆 13:00 – 15:00 Shop & Afternoon Track Session
🗓️ Weekend Schedule
Saturday & Sunday (5th & 6th September):
🕒 Open 12:00 – 21:00 (Final weekend for Shop & Arrive & Drive!)
⛔ Weekend Closed - Watch out for Special Weekend Events
Motors Instock
29 products
29 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
£9.99
-
Standard 540 can size for use in 1/10th scale or 1/12th scale vehicles.
- Motors are designed for use with 4 cell or 6 cell Nimh packs, or 1s or 2s lipo packs.
- Supplied with leads for easy connection in RTR cars.
- Includes internal cooling fan. - ALLOWED IN SOME TT01E EURO TRUCK CLASSES AS REPLACEMENT FOR TORQUE TUNED TAMIYA MOTOR
- 21 Turns especially designed for F2 Stock Cars and Bangers etc
- Approved by the BRCA for F2 Stock Cars.
Order in for same day dispatch (selected faster service if needed November 17) estimate in 2 days.
Introducing the SKY RC Ares V4 1/10 Sensored Brushless Motor, with all new design.
ROAR Approved Roaring Ahead
On the track or in every turn, the ROAR-approved ARES PRO 4 delivers uncompromising, professional-grade power.
ROAR isn’t just about compliance—it’s a mark of excellence.
Race with confidence. Race with ARES PRO 4.
BRCA, EFRA and ROAR Legal.
Competition-Optimized Design
Every Detail Tuned to Win. Engineered to Excel.
Low-Resistance Solder Tabs
High-quality tabs minimize power loss, ensuring maximum current flows straight to the rotor.
Stay Cool: CNC Aluminum Heatsink Case with Rear Venting
The precision-machined aluminum case dissipates heat efficiently, while a large rear vent boosts airflow over the Hall sensor for stable, reliable performance.
Global-Grade Bearings & Precision Shaft for Ultra-Smooth Control
Top-tier international brand bearings paired with a high-precision shaft ensure buttery-smooth, accurate operation—race after race.
High-Purity, High-Temp Copper Windings
220°C-rated, high-purity copper windings ensure efficient, low-heat power delivery for stronger punch and higher top speed.
Precision-Balanced, Heat-Resistant Rotor
Meticulously balanced for ultra-smooth rotation and minimal vibration, the rotor is crafted with a 200°C heat-resistant, explosion-proof structure—delivering consistent power, higher RPMs, and lasting durability.
200°C High-Temp Neodymium Magnets
200°C heat-resistant neodymium magnets and a high-efficiency iron core deliver strong torque, stable magnetism, and consistent performance under pressure.
Advanced Sensor
No Hesitation. Just Precision.
ARES PRO 4 features advanced sensor technology for ultra-smooth throttle response and precise low-speed control—crucial for technical tracks and tight corners. By eliminating cogging, or hesitation at low RPMs, it delivers seamless, immediate power exactly when you need it.
Adjustable Timing.
Any Track.
Adjustable timing is the core of brushless precision, enabling power delivery to adapt seamlessly to any track condition.
Low Timing (0-20deg)
Later power delivery creates smooth output, stable torque, and linear starts.
Ideal for precise control through continuous corners, preventing sudden wheel spin.
Mid Timing (20-40deg)
Balances instant punch with smooth sustained acceleration.
Perfect for mixed circuits with straights and curves, such as drift tracks
High Timing (40-60deg)
Earlier power delivery drives rapid RPM climbs and explosive top speed.
Best for flat-out straights, achieving higher RPM under the same voltage.
Redundant Dual Sensor Ports.
Zero Hassle.
Placed in different orientations, the dual sensor ports simplify wiring and offer built-in redundancy. If one fails, the other keeps you running—seamlessly and reliably.
Plug in. Power on. No setup—just pure performance.
*Before use, please confirm your ESC’s continuous/peak current, supported cell count, and sensor port type to ensure compatibility with the motor specifications.
Modular by Design.
Built to Stay New.
ARES PRO 4 features a fully rebuildable, modular design—allowing easy disassembly of the housing, stator, windings, and bearings with standard RC tools.
Clean, service, and swap components to keep performance sharp and consistent, race after race.
Always fresh. Always in control.
Multiple Turn Options.
Ready for Any Track.
Each turn rating gives your car its own distinct character.
Lower turns deliver explosive speed and powerful thrust.Higher turns offer smooth, consistent power for confident control, lap after lap.
Size and Weight
Size: 35.8x35.8x52mm
Weight: 148g±5g
Working and Storage
Operating temperature: -10°C-80°C
Operating humidity: 20%-80% (non-condensing)
Storage temperature: 0°C-50°C
Storage humidity: 30%-60% (non-condensing)
Order in for same day dispatch (selected faster service if needed November 17) estimate in 2 days.
- Available in winds 10.5T to 25.5T
Features
- The use of a heat-resistant magnet attached aluminum case and double insulated windings, high precision bearings, and rotor with a strong structure guarantees outstanding performance and super durability.
- The built-in Hall sensor non-adjustable end bell combined with a high precision and balanced rotor guarantees the user a smooth and linear power on demand.
- The silicon O-ring seal fitted between the end bell and stator helps to conduct inner heat to the motor case and prevent dust from entering the HALL sensor.
- The detachable structure design for daily cleaning and maintenance can effectively prolong the service life of this Justock motor and improve its operating efficiency.
- This motor is perfectly matched with the XR10-Justock ESC for all zero timing spec racing and also compatible with other Hobbywing Electronic Speed Controllers including other brands.
- This Justock motor is applicable to various 1/10th, 1/12th on-road & off-road vehicles. It can be an ideal choice for Stock or Sport class races but can also be a nice choice for newbies for practice.
- The motor design is in compliance with IFMAR, and ROAR specifications.
Order in for same day dispatch (selected faster service if needed November 17) estimate in 2 days.
Built from the ground up, the XeRun V10 G5 motor delivers more power and greater efficiency. It delivers a 3.9% boost in maximum output power and over 4% improvement in efficiency versus the V10 G4R.
Excellent Heat Dissipation
New endbell design exposes more of the winding to allow better heat dissipation. Patented rotor cooling design, Thermal efficiency has been improved to reduce overall temperatures and provide better consistency.
Optimized Weight and Centre of Gravity
Redesigned inside and out, the new-generation G5 motor is 13g lighter than the G4R, The G5 has been designed to move the weight towards the centreline of the vehicle.
Adjustable Hall Timing Accuracy
The timing assembly introduces a new adjustment to allow further fine tuning of the sensors. This new angle adjustment means your motor will run smoother and be more efficient.
Adjustable Hall Sensing Distance
Rotor and sensor spacing is now easily adjustable. Three settings allow racers the ability to fine tune the response and feel of the power delivery.
Designed for Easy Maintenance
Modular design allows for quick and simple motor cleaning to allow racers to keep their motors performing at their best.
Built with Superior Materials
The V10 G5 motor is built to excel in the harshest race conditions.
Applications:
1/10th & 1/12th STOCK Racing
KV 2500KV
T Count: 25.5T
LiPo: 1-3S Lipo
Shaft Diameter: Φ=3.175
Diameter/Length: Φ=35.8mm L=51.5mm
No-load Current(A): 3A
Poles: 2
Weight (g): 138g
Order in for same day dispatch (selected faster service if needed November 17) estimate in 2 days.
£8.99
Yeah Racing High Speed Cooling Fan 40x40mm for Motor Heat Sink #YA-0327
Description:
- Need a powerful fan which can keep your motor running at optimal temperatures even during high track temperatures? This will be the fan for you!
- Yeah Racing Cooling Fan runs at Ultra High Speeds. This fan will also provide unmatched performance, the dual ball bearing fan allows for high rpms and high airflow.
Feature:
- For: RC Cars
- Material: Plastic
- Color: Black
Specification:
- Fan Size: 40*40*10mm
- Operating voltage 5-7.2v
- Start-up voltage 3v
- 12000+/-10% RPM
- Weight: 13.0g
- Plastic Blade and Frame Housing
- Dual ball Bearing
- Stainless steel shaft core
- Wire Length 250mm
- Connector JST
Include:
- Tornado High Speed Cooling Fan 40x40mm (1 pc)
Order in for same day dispatch (selected faster service if needed November 17) estimate in 2 days.
£18.99
Aluminum chassis brace, which also seconds as a fan mount with the included 540 tornado fan to keep your motor cool!
Feature:
- For: Tamiya MB-01 BT-01
- Material: Aluminum & Plastic
- Color: Blue & Black
- w/ YA-0180 fan
Include:
- Aluminum Brace (1pc)
- Fan (1pc)
Order in for same day dispatch (selected faster service if needed November 17) estimate in 2 days.
£15.99
Description
The new Poison motors are the entrance to more fun and speed. They are easy to repair and feature super high revolutions and torques! They are equipped with sintered self-lubricating bearings for a long lifetime. The Poison motors are serially equipped with a motor cable and an anti-interference circuitry.
Revolution: 6500 rpm
Output: 165 Nmm
Specifications
- Brand
- Carson
- Category
- Spare Parts
- Scale
- 1:14
- Spares Category
- Electrical
- Electrical
- Electric Motors
Order in for same day dispatch (selected faster service if needed November 17) estimate in 2 days.
£9.99
FOR 540 Brushed / 3650 Brushless Motors
Powered via a JST plug from the Receiver
Order in for same day dispatch (selected faster service if needed November 17) estimate in 2 days.
£9.99
Introducing the CORE 20 Silver Can Brushed 540 Motor.
- 20 Turns especially designed for the 1/12th Mini class.
- Standard 540 can size for use in 1/10th scale or 1/12th scale vehicles.
- Motors are designed for use with 4 cell or 6 cell Nimh packs, or 1s or 2s lipo packs.
- Supplied with leads for easy connection in RTR cars.
- Includes internal cooling fan.
Order in for same day dispatch (selected faster service if needed November 17) estimate in 2 days.
ORCA introduce the Stock GT series, designed for the stock classes with s specific motor or as a controlled handout with fixed timing.
Some racing series use only motors with fixed timing to stop letting technology decide and become the winner. This is where ORCA wants to contribute its expertise to ensure fair competition for all with any fixed timing racing.
Order in for same day dispatch (selected faster service if needed November 17) estimate in 2 days.
£1.75
SOLDERING REQUIRED
Order in for same day dispatch (selected faster service if needed November 17) estimate in 2 days.
HOBBYWING QUICRUN 3650 G2 17.5T SENSORED MOTOR
The built-in Hall sensor non-adjustable end bell combined with a high precision and balanced rotor guarantees the user a smooth and linear power on demand.
The silicon O-ring fitted between the end bell and stator helps to conduct inner heat to the unique motor case to maximize cooling for extreme cooling conditions. The end bell is easy to be removed for maintenance purposes and for the replacement of common wearing parts such as rotor and sensor module (Ex bearings).
Customized 3.5mm low impedance bullet connectors soldered to the motor wires guarantee "plug-and-play" and stable connections between the ESC and motor.
When pairing the QuicRun3650 G2 motor with the Hobbwing QuicRun-10BL60-Sensored ESC, the excellent match between ESC and motor will give you a very smooth and linear power band.
Hobbywing QuicRun 3650 SD G2 Features:
- Linear & Smooth Control
- Great Heat-dissipation
- Plug-and-Play
- Re-buildable Design
- Compatible (with QuicRun-10BL60-Sensored ESC)
Spec Check:
- Scale: 1/10th
- Brushed/Brushless: Brushless
- Sensored/Sensorless: Sensored
- Pole Count: 2
- KV Rating: 2170
- LiPo Cells: 2-3S
- No-load Current(A): 1.6
- O.D.(mm): 36 (1.147in)
- Length (mm): 52.8 (2.079in)
- Shaft Diameter (mm): 3.17 (0.125in)
- Weight: 187g
- Timing: Fixed
Order in for same day dispatch (selected faster service if needed November 17) estimate in 2 days.
Order in for same day dispatch (selected faster service if needed November 17) estimate in 2 days.
MOUNT - May Say Louise or Carten on the mount - both Gun Metal Colour
Order in for same day dispatch (selected faster service if needed November 17) estimate in 2 days.
HOBBYWING QUICRUN 3650 G2 25.5T SENSORED MOTOR
Unleashing Performance: The Hobbywing 30404308 Motor.
The Hobbywing 30404308 motor stands out as a quintessential powerhouse for RC enthusiasts seeking versatility and reliability. Designed to cater to both on-road and off-road adventures, this motor brings precision and power to the forefront of RC racing.
A Closer Look at the Technology.
Built for excellence, the Hobbywing 30404308 motor features a sensored design, ensuring smoother performance with precise control. Whether you're tackling a tight corner on a race track or navigating rugged terrain, the sensored technology offers unparalleled responsiveness that seasoned racers will appreciate.
Tailored for Versatility.
With a KV rating of 1520 and compatibility with 2-3S LiPo cells, this motor is a versatile choice for a range of applications. From 1/10th scale touring cars to 1/12th scale F1 models, and even off-road buggies, its adaptability makes it a favorite among competitive racers and hobbyists alike.
Perfect for Competitive Edge.
In stock and sport class competitions, having the right motor can be the difference between first place and the rest. The fixed timing and dual-pole count are engineered for maximum efficiency, giving racers the edge they need to outperform their rivals.
Specifications
Scale: 1/10 and 1/12
Type: Brushless
KV Rating: 1520
Compatible LiPo Cells: 2-3S
No-load Current: 1.1A
Outer Diameter: 36mm
Length: 52.8mm
Shaft Diameter: 3.17mm
Weight: 186g
Timing: Fixed
Order in for same day dispatch (selected faster service if needed November 17) estimate in 2 days.
Outstanding Response and Control
The new Quicrun brushed motors offer improved performance, reliability, and response over other motors. With improved materials and overall design, these motors offer significant power gains.
Excellent efficiency
With up to 69% maximum efficiency, the Quicrun brushed motors far exceed standard motors of the same specifications (555-11T). The maximum efficiency is up to 17% higher. These new motors run cooler (Lower temps) than similar motors under the same load.
Zero Cogging Torque Design
The 555 motor adopts a 5-slot design, and the motor cogging effect is virtually eliminated. These new motors have a very small torque fluctuation and, bring a very linear response at all speeds for an improved overall drive feel.
Adjustable mechanical timing of the motor
The mechanical timing of the motor can be adjusted by -20 — 20 °. This allows users to fine-tune the RPM and feel of motors. Timing adjustments also allow the motors to be used for CCW and CW applications.
Specialized Carbon Brush for extended life
Developed specifically for these motors, the new brushes feature a custom blend to provide extremely long life, while providing great performance. These motors start to compare to brushless motors in terms of life span.
Modular design for easy service and cleaning
The motors feature an easy-to-service rebuildable design. Convenient for cleaning and maintenance, effectively prolonging the life span and maintaining the efficiency of the motor.
PCB anti-interference board
The motor is equipped with a dual PCB anti-interference board. These reduce the harmful spikes and noise from affecting your speed control.
Quality materials
To ensure high tolerance to abuse and heavy-duty driving, a 200°C high-temperature resistant magnet, 180°C high-temperature resistant copper wire has been used. Combined with 0.35 mm (only 555) ultra-thin silicon steel sheet, and the Hobbywing custom carbon brush, these motors are built to handle the demands of today's driver.
Specifications
Type
Scale - 1/10th
Brushed/Brushless - Brushed
Turns - 30T
Relevant Parameters
RMP@7.4v - 10500
Input Voltage - ≥12.6v
Slot - 3
Size & Weight
O.D.(mm) - 36
Length (mm) - 53.2
Shaft Diameter (mm) - 3.175
Weight (g) - 168
Applications - 1/10thOn-road / Buggy / Crawler & 2WD Truck
Order in for same day dispatch (selected faster service if needed November 17) estimate in 2 days.
£7.49
This is Yeah Racing Aluminum 380 Motor Heat Sink w/ Cooling Fan Blue. This Heat Sink w/ Fan features durable fan which creates strong winds to help cool off the motor. This Heat Sink w/ Fan is economical and great in quality, worth every buck of it.
Feature:
- For: 380 sized Motors
- Material: Aluminum
- Fan : 25 X 25mm
- Color: Blue
Include:
- Yeah Racing Aluminum 380 Motor Blue Heat Sink (1 pc)
- Fan (1pc)
- Extender Cable (1pc)
Include:
- Yeah Racing Aluminum 540 Motor Heat Sink Blue w/ Fan (1 pc)
- Extension Cable (1 pc)
Order in for same day dispatch (selected faster service if needed November 17) estimate in 2 days.
Introducing the 1/10 FuriaX Supa 3650 Brushless Motor from SKY RC
FuriaX · Born on the Track.
We test, refine, and perfect every ESC & motor on the FuriaX Track — our own in-house RC circuit built for racing.
Because real performance isn’t proven in labs — it’s earned on the track.
FuriaX is built of hobbyists, by hobbyists, for hobbyists.
First Run. Full Gear.
Ultra-thin 0.2mm Stator Laminations
Less loss. More efficiency. Cooler runs.
6061-T6 Aluminum Can
Strength in structure. Light in weight. Cool in heat.
High-Purity, High-Temp Copper Windings
220°C-rated, high-purity copper windings ensure efficient, low-heat power delivery for stronger punch and higher top speed.
Precision-balanced Rotor
Perfectly balanced for high-speed stability, refined output, and total driving confidence.
Four-Pole 12-Slot
Stronger Torque
Smoother Power
Compared to two-pole motors, the four-pole 12-slot design delivers greater torque and smoother output.
Faster launches, steadier climbs, effortless heavy loads — with refined control even at low speeds.
Effortless Wiring Plug and Play
Pre-soldered 4.0mm gold-plated connectors come factory-fitted, so no soldering is required—just plug in and go, leaving more time for the thrill of the drive. Paired with flexible ABC phase wires in Blue / Yellow / Orange, routing is clearer, cleaner, and more reliable, making installation effortless.
Dust. Mud. Splashes No Problem
Engineered to resist dust and splashes, the motor keeps going strong.
From dirt to mud, it runs smooth and steady.
Versatile Fit Easy Maintenance
Supports most mainstream 1/10 chassis. Drop-in fit, no mods required.
Multiple KV Options
A range of KV ratings to suit track racing, street runs, or light off-road—find your perfect setup.
Specifications
1/10 FuriaX Supa 3650 Brushless Motor
3600 KV
<13V
Voltage
1.7A
No-load Current
69A Max.
Load Current
900W Max.
Power
Ø15*Ø5.00*16
Rotor(mm)
Order in for same day dispatch (selected faster service if needed November 17) estimate in 2 days.
£7.99
Order in for same day dispatch (selected faster service if needed November 17) estimate in 2 days.
Following on from the success of the HobbyWing Justock G2 the Justock G2.1 feature fixed timing and easy to use solder joints, making it an excellent motor for stock or sport class races where a controlled motor is needed.
The Justock G2.1 has a heat-resistant magnet attached to the aluminum case, double insulated windings, high precision bearings and a rotor with a strong structure which guarantees outstanding performance and increased durability. The built-in hall sensor and non-adjustable end bell combined with the high precision balanced rotor guarantees a smooth linear power delivery.
The silicon 'o'-ring seal fitted between the end bell and stator helps to conduct inner heat to the motor case and prevent dust from entering the hall sensor. The case is designed for daily cleaning and maintenance which can prolong the service life of the motor and improve its operating efficiency.
This motor is perfectly matched with the XR10-Justock ESC for all zero timing spec racing and also compatible with other Hobbywing Electronic Speed Controllers.
HobbyWing Justock G2.1 Features:
- Heat-resistant magnet and aluminium case
- High precision balanced rotor
- Applicable to 1/10th, 1/12th on-road and off-road vehicles
- Perfectly matched with the XR10-Justock ESC
- Complies with IFMAR, and ROAR specifications
Order in for same day dispatch (selected faster service if needed November 17) estimate in 2 days.
£2.50
Order in for same day dispatch (selected faster service if needed November 17) estimate in 2 days.
£14.99
Order in for same day dispatch (selected faster service if needed November 17) estimate in 2 days.
£9.99
-
- Standard 540 can size for use in 1/10th scale or 1/12th scale vehicles.
- Motors are designed for use with 4 cell or 6 cell Nimh packs, or 1s or 2s lipo packs.
- Supplied with leads for easy connection in RTR cars.
- Includes internal cooling fan.
15Turns is faster than a 21Turn - Please make sure the ESC used can handle.
Order in for same day dispatch (selected faster service if needed November 17) estimate in 2 days.
£7.99
FITS ON MOST 1/10 CAR AND IS FOUND TO BE THE ONLY FAN HEATSINK UNIT TO FIT THE TAMIYA TT01E EURO TRUCK. FIT AND TILD IT AT 120DEG FOR FITMENT.
Order in for same day dispatch (selected faster service if needed November 17) estimate in 2 days.
Introducing the Hobbywing Justock Combo 'JS2' with XR10 G3S speed control, paired with the Hobbywing G2.1 25.5T fixed timing brushless motor.
The XR10 Justock G3S has precise control and powerful performance. It is suitable for 1/10th on-road and off-road zero-timing (blinky) competitions.
Speed Control Features.
Fan intelligent start and stop function
When the ESC temperature is low, the fan does not activate, when the ESC temperature reaches the preset value, the fan automatically turns on.
The intelligent start and stop function of the fan not only reduces noise, saves power, but also ensures that the ESC works in a good temperature range.
Freewheeling Feature
With the freewheeling function turned-on, the ESC temperature is lower, the vehicle decelerates faster when the throttle input is off, and it has better controllability around the corners.
Built-in polarity protection
One danger that all electrical systems face is a reversed polarity from the power source. This can be caused by a short circuit, or usually, accidentally reversing the terminals.
Multi RPM limit, select as needed
Supports 79RPM Limits
(10000-88000RPM)RPM limit value selection. It can be programmed through the LCD programming box or OTA module. It is simple and convenient to meet the RPM limit requirements of various competitions in the world.
Built-in capacitor module, optimized layout
The built-in capacitor module eliminates the need for external capacitors and unwanted space.
Built in BEC
The ESC has a built-in BEC which can support a maximum output current of up to 8A. The output voltage at either 6V or 7.4V. This will ensure constant power supplied to today’s high-torque servos in the market.
Built-in data logging function
The ESC has a built-in data recording function making it easy to obtain the operating status.
The data includes;
Minimum voltage
Maximum ESC temperature
Maximum current
Maximum motor temperature
Maximum RPM
Wireless connection for data recording and analysis
After the ESC is connected to the OTA Bluetooth module, connect to the ESC through the HW Link mobile app and turn on the real-time data recording function. You can view data such as throttle, voltage, current, temperature, speed, etc. in real time. In addition, OTA can record the above data using HW Link. Easy to implement data analysis functions. Note: Due to the Bluetooth transmission distance, the effective distance is about 5m!
Parameters optimized
It is tailored and are more in line with competition needs.
Type
Scale - 1/10th
Brushed/Brushless - BL
Sensored/Sensorless - SD
Waterproof - No
Specifications
Cont./Peak Current - 60A/380A
Input Voltage - 2S LiPo
BEC Output - 6V/7.4V @4A
Wires & Connectors
Input Wires - Black-14AWG-200mm*1 Red-14AWG-200mm*1
Output Wires - Black-14AWG-200mm*1 Black-14AWG-200mm*1 Black-14AWG-200mm*1
Input Connectors - No
Output Connectors - No
Fan
Size - 25x25x10mm
Output Wires - 5-7.4V
Input Connectors - Powered by BEC
Data Recording
Extreme Value - Not Supported
Real-Time Date - Not Supported
Historical data (Graph) - Not Supported
ESC Programing via
SET Button on ESC - Not Supported
LED Program Box - Not Supported
LCD Program Box - Supported
WiFi Module - Supported
OTA Programmer - Supported
Programming Port - Separate
Firmware
Firmware Upgrade - Supported
Size & Weight
Size - 40.9x33.9x32.1mm
Weight - 75.4g(w/Wires)
Applications
Applications - SL BL Motors / SD BL Motors
Vehicles - 1/10th,1/12th On-road and Off-road club competition and normal training
KV Rating/T Count - ≥10.5T 3650 Motor
-------------------------------------------------------------
Motor Features
- The use of a heat-resistant magnet attached aluminum case and double insulated windings, high precision bearings, and rotor with a strong structure guarantees outstanding performance and super durability.
- The built-in Hall sensor non-adjustable end bell combined with a high precision and balanced rotor guarantees the user a smooth and linear power on demand.
- The silicon O-ring seal fitted between the end bell and stator helps to conduct inner heat to the motor case and prevent dust from entering the HALL sensor.
- The detachable structure design for daily cleaning and maintenance can effectively prolong the service life of this Justock motor and improve its operating efficiency.
- This motor is perfectly matched with the XR10-Justock ESC for all zero timing spec racing and also compatible with other Hobbywing Electronic Speed Controllers including other brands.
- This Justock motor is applicable to various 1/10th, 1/12th on-road & off-road vehicles. It can be an ideal choice for Stock or Sport class races but can also be a nice choice for newbies for practice.
- The motor design is in compliance with IFMAR, and ROAR specifications.
Order in for same day dispatch (selected faster service if needed November 17) estimate in 2 days.
Introducing the Hobbywing QuicRun 10BL60 Sensored G2 Brushless Speed Control and 3650 SD G2 motor combo.
Outstanding quality, amazing price
Crafted for entry-level and intermediate builders, this ESC stands out with its exceptional quality and user-friendly design. It eliminates the complex setup, allowing users to jump right into action without the need for complicated tuning or trouble shooting.
Powerful built in BEC
Compared to the G1 ESC, the G2 ESC features a significant upgrade in its BEC output. The continuous output current has increased from 2A to 4A. A peak current of up to 7A Switchable output voltages of 6V/7.4V. It effortlessly powers high-torque and high-voltage servos, giving users a smooth and responsive control experience.
Supports Boost/Turbo timing technology
With support for Boost/Turbo timing adjustments of up to 24 degrees, this ESC unleashes maximum motor power, delivering an instant boost in speed when needed.
High reliability and durability
- Low voltage protection
- Over-temperature protection
- Throttle signal loss protection
- Overload protection
Continuous current 60A. Peak Current 200A
A robust hardware foundation, combined with advanced software, equips this ESC with strong current resistance and an array of protective features. These safeguards significantly enhance its reliability and durability
Support multipleprogramming methods
The ESC supports three programming options: a multi-function LCD programming box, an LED programming box, and a SET button. This flexibility allows users to choose their preferred method for adjusting parameters with ease.
Support Motor Rotation Adjustment
This ESC is compatible with a wide range of vehicle frames, ensuring versatility across different setups.
Specifications
Type
Scale - 1/10th
Brushed/Brushless - BL
Sensored/Sensorless - SD
Waterproof - No
Specifications
Cont./Peak Current - 60A/200A
Input Voltage - 2S LiPo
BEC Output - Switch Mode 6V/7.4V@4A
Wires & Connectors
Input Wires - Black--14AWG-175mm*1 Red--14AWG-175mm*1
Output Wires - Blue-14AWG-175mm*1、Yellow-14AWG-175mm*1、Orange-14AWG-175mm*1
Input Connectors - No
Output Connectors - No
ESC Programing via
SET Button on ESC - Supported
LED Program Box - Supported
LCD G2 Program Box - Supported
LCD Pro - Supported
OTA Programmer - Not Supported
Program Port - Shared with fan port
Date Recording - Not supported
Firmware
Firmware Upgrade - Not Supported
Size & Weight
Size - 35.0*31*30.8mm
Weight - 66.5g (Included wires&connectors)
Applications
Motors -Sensorless / Sensored Brushless Motor
Vehicles - 1/10th Touring, Buggy, Drift,1/12th and 1/14th Vehicles
KV Rating/T Count - QUICRUN 3650 SD G2
-------
Motor
Great Heat-dissipation
The silicon O-ring fitted between the end bell and stator helps to conduct inner
heat to the unique motor case to maximize cooling for extreme cooling conditions.
Plug-and-Play
Customized 3.5mm low impedance bullet connectors soldered to the motor wires
guarantee "plug-and-play" and stable connections between the ESC and motor.
Re-buildable Design
The end bell is easy to be removed for maintenance purposes and for the replacement
of common wearing parts such as rotor and sensor module (Ex bearings).
Introducing the Hobbywing QuicRun 10BL60 Sensored G2 Brushless Speed Control and 3650 SD G2 motor combo.
Outstanding quality, amazing price
Crafted for entry-level and intermediate builders, this ESC stands out with its exceptional quality and user-friendly design. It eliminates the complex setup, allowing users to jump right into action without the need for complicated tuning or trouble shooting.
Powerful built in BEC
Compared to the G1 ESC, the G2 ESC features a significant upgrade in its BEC output. The continuous output current has increased from 2A to 4A. A peak current of up to 7A Switchable output voltages of 6V/7.4V. It effortlessly powers high-torque and high-voltage servos, giving users a smooth and responsive control experience.
Supports Boost/Turbo timing technology
With support for Boost/Turbo timing adjustments of up to 24 degrees, this ESC unleashes maximum motor power, delivering an instant boost in speed when needed.
High reliability and durability
- Low voltage protection
- Over-temperature protection
- Throttle signal loss protection
- Overload protection
Continuous current 60A. Peak Current 200A
A robust hardware foundation, combined with advanced software, equips this ESC with strong current resistance and an array of protective features. These safeguards significantly enhance its reliability and durability
Support multipleprogramming methods
The ESC supports three programming options: a multi-function LCD programming box, an LED programming box, and a SET button. This flexibility allows users to choose their preferred method for adjusting parameters with ease.
Support Motor Rotation Adjustment
This ESC is compatible with a wide range of vehicle frames, ensuring versatility across different setups.
Specifications
Type
Scale - 1/10th
Brushed/Brushless - BL
Sensored/Sensorless - SD
Waterproof - No
Specifications
Cont./Peak Current - 60A/200A
Input Voltage - 2S LiPo
BEC Output - Switch Mode 6V/7.4V@4A
Wires & Connectors
Input Wires - Black--14AWG-175mm*1 Red--14AWG-175mm*1
Output Wires - Blue-14AWG-175mm*1、Yellow-14AWG-175mm*1、Orange-14AWG-175mm*1
Input Connectors - No
Output Connectors - No
ESC Programing via
SET Button on ESC - Supported
LED Program Box - Supported
LCD G2 Program Box - Supported
LCD Pro - Supported
OTA Programmer - Not Supported
Program Port - Shared with fan port
Date Recording - Not supported
Firmware
Firmware Upgrade - Not Supported
Size & Weight
Size - 35.0*31*30.8mm
Weight - 66.5g (Included wires&connectors)
Applications
Motors -Sensorless / Sensored Brushless Motor
Vehicles - 1/10th Touring, Buggy, Drift,1/12th and 1/14th Vehicles
KV Rating/T Count - QUICRUN 3650 SD G2
-------
Motor
Great Heat-dissipation
The silicon O-ring fitted between the end bell and stator helps to conduct inner
heat to the unique motor case to maximize cooling for extreme cooling conditions.
Plug-and-Play
Customized 3.5mm low impedance bullet connectors soldered to the motor wires
guarantee "plug-and-play" and stable connections between the ESC and motor.
Re-buildable Design
The end bell is easy to be removed for maintenance purposes and for the replacement
of common wearing parts such as rotor and sensor module (Ex bearings).
Order in for same day dispatch (selected faster service if needed November 17) estimate in 2 days.
£2.99
Order in for same day dispatch (selected faster service if needed November 17) estimate in 2 days.
£1.99
Order in for same day dispatch (selected faster service if needed November 17) estimate in 2 days.
Explore Related Collections
Collection description
- Choosing a selection results in a full page refresh.
- Opens in a new window.