USED/DEMO

This is a one off instore made replica race truck

It is a 4x4 Race Truck CC02 Tamiya

• Tamiya 1/14 Lexan Man Race Truck Body
• Replica Engine/heatsink working
• Replica Solid beam axle suspension and adjustable alloy coilovers
• Replica 12mm Hex wheels on Radial Replica Tyres
• Manual Working 5th Wheel Tamiya Attachment
• Replica Plastic Low Loader Trailer with Alloy 5th wheel pin and swosh plate
• Ultra Thin HV 4000mah Race Battery install inline.
• Single Speed high torque gearbox
• Tamiya Race Motor Brushed
• Hobbywing 1060 ESC Brushed
• High Torque Servo Digital and Metal Control Bars
• Fully ball raced and metal diffs and drive axles.

This Replica truck is a hybrid of the Tamiya TT01E style with the functions and towing capacity of the 1/14 Tractor Truck Series.

Body is fitted with all parts accessible without removing the body.

A Lipo charger with 4mm Bullets required for charging.

This unit has been used, and will come with slight scratches as seen.

This isa custom vehicle - spares would be mostly from the Tamiya CC01 range.

This is an instore show model but can be sold at the right price.

Note the trailer is only plastic, and is from the Bruder Toy Range. Propper Tamiya Hauler Trailers can be fitted and towed.

A Carson Wheel Radio is included.

This a Team Associated RC10 6x6 Semi Truck - Only used indoor for Demo during Races instore. 

Comes extra from Factory:

• Metal Geared Digital Servo
• Hight Torque Servo Saver
• 5000mah 2S Lipo Shorty Battery
• Carson 2ch Wheel Radio
• 6x Foam Carpet Tyres
• Hobbywing Sensored 120amp Brushless ESC and Adjustable timing Pro Race 17.5T Motor
• Full working vehicle - just needs a Charger capable of charing 2S lipo batteries. 
• Box and manual included
• Geared for indoor use.
• Motor Fan Fitted

RRP Kit £399.99

Radio £39.99

ESC £69.99

Motor £69.99

Servo £20.00

Battery £30.00

Ex-demo unit - only used a few times. No battery or charger 

Fitted with drift tyres 

Mini-Z AWD Skyline 2000GT-R KPGC10 Racing'72 Red No.6 (MA020/KT531P)

Sold working as seen. 

only been raced indoors. 

comes with:

- Reedy Brushless system 

- Uprated servo

- Spare oarts

- Orginal wheels and tyres plus carpet Schumacher yellow compound wheel and tyres 

- Original box and manual 

requires a 2channel radio, a 7.4v standard or shorty Lipo and appropriate charger. 

RRP with optional tyres and spares would total over £300 new. Less a radio value of around £35.00. 

Will need center props, motor mount, body, servo (servo kit appears to be present in photo. 

diffs appear to work just fine. 

this is a rare find 

we do appear to have a body that fits. It’s a ford Tow Mater style body listed in our other auctions. 

Sold as seen as incomplete project. Will need a transfer box and some more props to drive. 

Simulation engine included and appears to have a wire to max fan spin. Light mount bracket fitted to chassis & body. Just need some lights etc to complete. Battery tray included. ABS body. Missing all the tiny detail parts. 

diffs are locked type. 

body appears to be mounted and fit. 

Sold as seen.

Appears to be in good working order. Front ball diff apparently. Signs of use underneath. The body has no cracks. 

Sold as seen 

Will need prop shafts, servo mount and horn, 12mm drive hexs to complete.

comes with a Hobbywing brushless motor

needs all other electrics. 

Alloy ladder frame chassis and tube body abs

Sold as seen. We have other alike this and spares for sale too at time of sale. 

Sold as seen in parts 

Appears to be in good working order, sold as seen 

As shown, appears to be in working order after trying new batteries and testing the menu. Has not been tested on a model. 

Used - with box and new receiver.

Introducing the SANWA Gemini Sport Radio Set with RX391W receiver.

The Gemini Sport is based upon the popular MX-6 FH-E system and is supplied with 1 x RX-391W waterproof receiver.

Specification (From MX-6)

- Display Model Name on LCD
- Dual Rate(D/R)
- End Point Adjustment(EPA)
- Exponential(EXP)
- Anti Lock Brake(ALB)
- Trim(TRM)
- Model Memory [10 Model](MODEL)
- Sub-Trim(SUB-T)
- Reverse (REV)
- Model Name (NAME)
- Voltage Monitor (BATT)
- Supplied with RX-391W Waterproof Receiver
- Supplied with 4 x AA Battery box (Requires batteries)

Recommended LiPo battery IP455085-2S - Intellect Tx Lipo 2300mAh 1C 2S MX11

As shown 

spray guns included

Comes with:

• Foam Tyres
• Alloy Prop
• Fully Ball Raced
• Tamiya Torque Tuned Motor (Like New)
• Used Body
• Has an undertray fitted, but suggest to remove
• Last seen working on our Raceway
• 3 sets of wheels and tyres 

as seen 

Sold as seen - battery & charger included

Weather effect applied - no box 

Sold as seen 

Sold as seen. Not 100% sure of model or year 

Sold as seen. Has been raced, but very strong body and only chips. Much stronger than Tamiya bodies as made from 1mm high impact Lexan. Based on the Scania T-Cab Highline. 

Will fit any Tamiya TT01E 1/10 car or TT02. Will fit many others are is standard 256mm wheelbase and 190mm in width. Scale is 1/14th to match Tamiya Euro Truck Series. 

Sold as seen

Sold as seen. This is a Conversion kit, not the full car. Sold as seen. And may not be complete. 

Sold as seen

Introducing the FuriaX Supa 60A Brushless ESC from SKY RC.

used unit - no plugs on motor wires. Rest looks good as new 

FuriaX Supa 60A Brushless ESC is your perfect first step into brushless power — delivering exciting performance with effortless ease. It’s not just an ESC. It’s the key to unlocking your passion for speed — built for fun, reliability, and confidence from the very first run.

FuriaX · Born on the Track.
We test, refine, and perfect every ESC & motor on the FuriaX Track — our own in-house RC circuit built for racing.
Because real performance isn’t proven in labs — it’s earned on the track.
FuriaX is built of hobbyists, by hobbyists, for hobbyists.

Beginner Friendly Guru Ready
Supa makes brushless power simple for newcomers and effortless for seasoned RC gurus — stable, reliable, affordable and always fun.

Effortless App Programming
Forget bulky programming boxes or cards. With wireless connectivity, you can easily adjust your ESC settings directly from your smartphone, saving you the cost of extra equipment.

60A Steady 360A Ready
With a continuous 60A output and bursts up to 360A, Supa delivers steady power to your brushless motor for smooth acceleration, reliable braking, and the confidence to push harder every run.

Smart BEC Power Made Simple
The SUPA ESC features a switchable 6V / 7.4V BEC, adjustable right from the app.
Standard servos run steady, HV servos unlock their full potential — no jumpers, no hassle, just a tap away.

Drive Hard, Stay Cool.
A built-in aluminum heatsink and fan help keep things cool, so you can focus on driving instead of worrying.

Reliable Performance
Balanced speed and torque give you enough power for fun runs, backyard bashing, and light off-roading — without overwhelming new drivers.

Always Protected
With safeguards against:
• Low voltage
• Overheating
• Motor lock
Supa keeps your car protected while you learn.

Fit for Your Car
Designed to fit most 1/10 RC car chassis, the SUPA ESC pairs flawlessly with FuriaX motors and works seamlessly with mainstream brushless motors — delivering stable, consistent power across every setup.

Ready for Every Run
From backyard tracks to open parks, the FuriaX Supa Series gives you the power, durability, and confidence to enjoy every drive.
Specifications

Size and Weight
Size: 48×38×38.5mm
Weight: Approx. 100g

TechSpec
Constant/Burst Current: 60A/360A
Compatible Motor: Brushless Sensored & Sensorless Motor
Compatible Car: 1/10 Touring Car, 1/10 Buggy, 1/10 Short Course Truck
Battery Cell Count:
2-3S LiPo
6-9S NiMH
BEC Output: 6V/7.4V
Low Voltage Protection: Auto / Off / 3.0V / 3.2V, default: Auto
Over-temperature Protection: 85°C / 105°C / 125°C / None, default: 105°C
Cooling: Fan

Working and Storage
Operating temperature: 0℃~40℃
Operating humidity: 10％~90%
Storage temperature: -10℃~50℃
Storage humidity: 20％~65%

Kyosho Syncro KT231P+ 3CH Radio (w/ KR331 Rx)