Used - Clearance

Will need center props, motor mount, body, servo (servo kit appears to be present in photo. 

diffs appear to work just fine. 

this is a rare find 

we do appear to have a body that fits. It’s a ford Tow Mater style body listed in our other auctions. 

Sold as seen 

Will need prop shafts, servo mount and horn, 12mm drive hexs to complete.

comes with a Hobbywing brushless motor

needs all other electrics. 

Alloy ladder frame chassis and tube body abs

Sold as seen as incomplete project. Will need a transfer box and some more props to drive. 

Simulation engine included and appears to have a wire to max fan spin. Light mount bracket fitted to chassis & body. Just need some lights etc to complete. Battery tray included. ABS body. Missing all the tiny detail parts. 

diffs are locked type. 

body appears to be mounted and fit. 

As seen. Believed to be around 1/18th scale. Axles are about 12cm long 

Sold as seen. We have other alike this and spares for sale too at time of sale. 

Sold as seen 

Sold as seen in parts 

as seen 

Sold as seen. This is a Conversion kit, not the full car. Sold as seen. And may not be complete. 

Sold as seen. Not 100% sure of model or year 

Appears to be in good working order, sold as seen 

Appears to be in working order, but will need some rear drives shafts to return to 4WD. 

only electrics this truck has is a 540 brushed motor. 

has Schumacher RiB racing tyres fitted 

As shown, appears to be in working order after trying new batteries and testing the menu. Has not been tested on a model. 

As seen, no damage and size in photos 

body was a proline ford 

made from Lexan 

Sold as working, removed from an xray LMP car 

Ex-demo unit - only used a few times. No battery or charger 

Fitted with drift tyres 

Mini-Z AWD Skyline 2000GT-R KPGC10 Racing'72 Red No.6 (MA020/KT531P)

Used - with box and new receiver.

Introducing the SANWA Gemini Sport Radio Set with RX391W receiver.

The Gemini Sport is based upon the popular MX-6 FH-E system and is supplied with 1 x RX-391W waterproof receiver.

Specification (From MX-6)

- Display Model Name on LCD
- Dual Rate(D/R)
- End Point Adjustment(EPA)
- Exponential(EXP)
- Anti Lock Brake(ALB)
- Trim(TRM)
- Model Memory [10 Model](MODEL)
- Sub-Trim(SUB-T)
- Reverse (REV)
- Model Name (NAME)
- Voltage Monitor (BATT)
- Supplied with RX-391W Waterproof Receiver
- Supplied with 4 x AA Battery box (Requires batteries)

Recommended LiPo battery IP455085-2S - Intellect Tx Lipo 2300mAh 1C 2S MX11

As shown 

spray guns included

Comes with:

• Foam Tyres
• Alloy Prop
• Fully Ball Raced
• Tamiya Torque Tuned Motor (Like New)
• Used Body
• Has an undertray fitted, but suggest to remove
• Last seen working on our Raceway
• 3 sets of wheels and tyres 

Introducing the FuriaX Supa 60A Brushless ESC from SKY RC.

used unit - no plugs on motor wires. Rest looks good as new 

FuriaX Supa 60A Brushless ESC is your perfect first step into brushless power — delivering exciting performance with effortless ease. It’s not just an ESC. It’s the key to unlocking your passion for speed — built for fun, reliability, and confidence from the very first run.

FuriaX · Born on the Track.
We test, refine, and perfect every ESC & motor on the FuriaX Track — our own in-house RC circuit built for racing.
Because real performance isn’t proven in labs — it’s earned on the track.
FuriaX is built of hobbyists, by hobbyists, for hobbyists.

Beginner Friendly Guru Ready
Supa makes brushless power simple for newcomers and effortless for seasoned RC gurus — stable, reliable, affordable and always fun.

Effortless App Programming
Forget bulky programming boxes or cards. With wireless connectivity, you can easily adjust your ESC settings directly from your smartphone, saving you the cost of extra equipment.

60A Steady 360A Ready
With a continuous 60A output and bursts up to 360A, Supa delivers steady power to your brushless motor for smooth acceleration, reliable braking, and the confidence to push harder every run.

Smart BEC Power Made Simple
The SUPA ESC features a switchable 6V / 7.4V BEC, adjustable right from the app.
Standard servos run steady, HV servos unlock their full potential — no jumpers, no hassle, just a tap away.

Drive Hard, Stay Cool.
A built-in aluminum heatsink and fan help keep things cool, so you can focus on driving instead of worrying.

Reliable Performance
Balanced speed and torque give you enough power for fun runs, backyard bashing, and light off-roading — without overwhelming new drivers.

Always Protected
With safeguards against:
• Low voltage
• Overheating
• Motor lock
Supa keeps your car protected while you learn.

Fit for Your Car
Designed to fit most 1/10 RC car chassis, the SUPA ESC pairs flawlessly with FuriaX motors and works seamlessly with mainstream brushless motors — delivering stable, consistent power across every setup.

Ready for Every Run
From backyard tracks to open parks, the FuriaX Supa Series gives you the power, durability, and confidence to enjoy every drive.
Specifications

Size and Weight
Size: 48×38×38.5mm
Weight: Approx. 100g

TechSpec
Constant/Burst Current: 60A/360A
Compatible Motor: Brushless Sensored & Sensorless Motor
Compatible Car: 1/10 Touring Car, 1/10 Buggy, 1/10 Short Course Truck
Battery Cell Count:
2-3S LiPo
6-9S NiMH
BEC Output: 6V/7.4V
Low Voltage Protection: Auto / Off / 3.0V / 3.2V, default: Auto
Over-temperature Protection: 85°C / 105°C / 125°C / None, default: 105°C
Cooling: Fan

Working and Storage
Operating temperature: 0℃~40℃
Operating humidity: 10％~90%
Storage temperature: -10℃~50℃
Storage humidity: 20％~65%

New Bottle!

A carpet additive formulated for use when the grip is med/high, used with rubber or foam tyres on carpet tracks.

100 ml.

Sold as seen 

Used unit. Sold as seen. Does work. 

Sold as seen - on behalf of a customer 

Sold as seen. Unfinished project on behalf of a customer. 

FTX VANTAGE / CARNAGE / OUTLAW / BANZAI ESC WATERPROOF BRUSHED

An affordable brushed ESC that is used in the FTX Vantage/Carnage/Outlaw and Banzai.

This ESC is setup in a simple way for ease of operation. When the ESC is switched on it automatically searches for the neutral point. When the automatic setup is finished the motor sends out “Do” “Re” “Me” indicating the neutral point is set and it is ready to be operated.

The ESC has 2 programmable running modes and a Low voltage protection mode that can be enabled for LiPo batteries.

FTX Vantage/Carnage/Outlaw/Banzai Brushed WP ESC Features:

• Waterproof protection
• 5-6 cell NiMH compatibility
• 7.2-7.4V 2S Li-Po compatibility
• Li-Po Safety cut off when less than 6V
• Thermal Protection: When more than 90°C
• BEC Output: 5.6V 2A
• Small foot print for easy mounting
• Dimensions: 30mm x 28mm x 22mm
• Weight: 38g