Tamiya RC Kits - In stock

This high-performance front-wheel drive R/C chassis assembly kit is constructed around a rigid monocoque with lower deck and upper frame sections. It offers responsive drive characteristics and fuss-free maintenance of parts such as the easy-access differential, which can be removed from the underside with minimal disassembly. C.V.A. (Constant Volume Adjustable) oil shock-damped 4-wheel double wishbone suspension features dedicated long arms and steering linkage components for a range of setup options. A silky-smooth drivetrain utilizes full ball bearings, oil-filled gear differential unit and universal drive shafts. It can be assembled with a 225mm (M) or 239mm (L) wheelbase, making it compatible with appropriately-sized existing Tamiya M-chassis body parts sets.

Featured Components:

Monocoque frame chassis (with detachable lower section)
Long suspension arms
CVA oil dampers
Full ball bearings
Gear differential unit
Universal drive shafts
Hi-torque servo saver

• 1/10 scale R/C chassis assembly kit. Length: 332mm, width: 164mm.
• The core of the chassis is a 1-piece monocoque with integrated upper frame elements similar to the TA-07 Pro. It is designed to offer excellent rigidity with easy maintenance.
• Choose between 2 different wheelbases (M: 225mm, L: 239mm), simply by changing rear arm attachment direction.
• Newly designed front and rear suspension use long arms for ideal leverage ratio, in tandem with long steering linkage components. Rear toe can be adjusted simply using spacers.
• 4-wheel double wishbone suspension is fitted with CVA oil shocks.
• The TA06 oil-filled gear differential is used to drive the M-07. It is paired with universal drive shafts and full ball bearings.
• Compatible with standard IFMAR (Li-Po cell-type) regulation square-shaped battery packs.
• Compatible with Low-Profile servos.
• The chassis was designed with easy access to the stabilizers (sold separately) for quick, precise adjustments vital at the racetrack.
• Body mounts have a new reinforced design for more secure body attachment.
• The chassis gives its driver excellent “feedback,” allowing you to judge with clarity how your setup changes have impact.

This is a R/C model assembly kit recreating the form of the outstanding new NSX super sports car. The included polycarbonate body is lightweight and durable, and captures the aerodynamically-styled NSX silhouette with aplomb. Stickers are included to recreate markings on the car, including the distinctive "Jewel Eye" 6-lamp headlights, window frames and air intake mesh. The model runs on the adaptable TT-02 chassis, a beginner friendly unit with tuning potential!

TT-02 Chassis:
The shaft-driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to give excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports. Gun metal color mesh wheels are paired with radial tires.

Specifications
_Length: 438mm, Width: 190mm, Height: 124mm _Wheelbase: 257mm__Tire Width/Diameter: 27/67mm (Front & Rear) _Bathtub-type Frame _Shaft-Driven 4WD _Front/Rear 4-Bevel Resin Differentials _3-Piece Steering Tie-Rod _4-Wheel Double Wishbone Suspension _Front/Rear Friction Dampers _Gear Ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) _Type 540 Motor

The 1999 version of the two-door Subaru Impreza rally car was a highly balanced beast, with 4-cylinder turbocharged all-aluminium boxer engine, a drive-by-wire throttle and semi-automatic 6-speed transmission. This R/C model assembly kit recreates the Impreza from the year's opening rally in Monte-Carlo, with the form faithfully depicted in durable polycarbonate, and separate parts used to recreate the rear wing and side mirrors. Stickers are included to recreate the multitude of team and sponsor logos. The model runs on the adaptable TT-02 chassis, which is equally at home on road and flat dirt surfaces.

The TT-02 Chassis
The shaft-driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to give excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports. Gold colour fin-spoke wheels are paired with rally block tyres.

• With 4WD drivetrain
• ECS included
• Torque-tuned 540-brushed type motor is included
• The classic form of the car is recreated in polycarbonate, with separately-moulded side mirror and rear wing parts
• The TT-02 chassis features a shaft-driven 4WD system that offers easy handling and great customisation
• Stickers are included to recreate the markings on the car, as are window masking stickers for use when painting
• 16-spoke gold colour moulded wheels are paired with rally block tyres (50476)
• A wide range of option parts are available to tune the TT-02 chassis
• Fully independent double wishbone suspension
• Suitable for both off-road and on-road terrain

• Two-channel radio, steering servo, 7.2-7.4volt battery with compatible charger, and Tamiya PS polycarbonate paint

• Length: 370mm, Width: 250mm, Height: 160mm
• Wheelbase: 266mm
• Tread: 217mm (Front), 208mm (Rear)
• Bathtub-type Chassis Frame
• Shaft-Driven 4WD
• Front/Rear 4-Bevel Differentials
• 3-Piece Steering Tie-Rod
• 4-Wheel Double Wishbone Suspension
• Tyre Width/Diameter: 32/82mm (Front), 41/82mm (Rear) (Square Spike Tyres)
• CVA Oil Shock Units
• Gear Ratio＝10.71：1 (with kit-included pinion gear)
• Type 540 Motor
• ESC is included

• 2-Channel radio, Battery Pack & Charger, R6/AA/UM3 batteries for transmitter

• Scale 1/10. Length: 400mm, Width: 244mm, Height: 134mm
• Wheelbase: 287mm
• Tread (Front/Rear): 222/208mm
• Tyre Width/Diameter: 23/81mm (Front), 41/86mm (Rear)
• Monocoque Frame
• Rear Wheel 2WD
• 3-Bevel Differential
• 2-Piece Steering Tie-Rod
• Front & Rear Double Wishbone Suspension
• Gear Ratio = 9.28:1
• Type 540 Motor

• Two-channel radio, electronic speed controller (ESC), steering servo, 7.2-7.4volt battery with compatible charger, and Tamiya PS polycarbonate paint

Tuned for Success
This is an R/C model assembly kit of the R34 GT-R Z-tune, which debuted at the 2005 Tokyo Auto Salon, wowing visitors with its blend of looks and performance. The model recreates the car's form in polycarbonate, capturing its wide front and rear fenders, front bumper-side and bonnet outlets - all high-performance hallmarks of NISMO, the motorsports arm of Nissan which constructed each of the 20 cars in the limited edition production individually by hand. The TT-02D is a drift spec shaft driven 4WD chassis which offers thrilling drift action!

Adaptable & Balanced TT-02 Chassis Drift Version
Enjoy the thrill of drifting with this specially tuned drift spec version of the TT-02 chassis. The chassis also features drift spec parts such as 24mm width drift tires (fitted to stylish matte-finish metal-plated wheels), and CVA shock units on the 4-wheel double wishbone suspension. Full ball bearings, an aluminum motor heat sink, and a sport-tuned motor come as standard. Of course, the chassis retains the original TT-02's excellent drivability, ease of maintenance, and adaptability.

Specifications
_Length: 442mm, Width: 187mm, Height: 134mm _Wheelbase: 257mm__Tire Width/Diameter (Front & Rear): 24/63mm _Bathtub-type Frame _Shaft Driven 4WD _Front/Rear 4-Bevel Resin Differentials _3-Piece Steering Tie-Rod
_4-Wheel Double Wishbone Suspension _Front/Rear CVA Oil Shocks _Gear Ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinion) _Type 540 Sport-Tuned Motor _Full Ball Bearings

The 2WD buggy The Frog will be a model familiar to many who joined in the first R/C boom of the 1980s. Now, it serves as the inspiration for this new model, the Neo Fighter Buggy. At home both on- and off-road, this 2WD buggy features a lightweight yet tough monocoque frame that protects vital equipment such as the servo and battery from damage; its long form also offers great stability. Coupled with friction dampers and 4-wheel double wishbone suspension, it means the Neo Fighter Buggy performs well even on difficult off-road surfaces. Such a combination of hassle-free assembly and high-performance, light-on-its-feet handling is sure to recommend this model not only to fans of the past, but also to the next generation of R/C racers!

The DT-03 Chassis
The stylish slim-line form of this chassis stems from its lightweight yet durable monocoque frame, which features a longitudinally-positioned battery and the R/C equipment along the centreline for excellent balance. The combination of a long 287mm wheelbase and 4-wheel double wishbone suspension, married to CVA oil dampers with long arms, allows the model to handle with stability on poor surfaces. Ribbed front and square spike rear tires provide ample grip, and the rear-positioned gearbox is sealed to protect from dust and dirt, with the built-in differential gear offering smooth cornering.

• Utilises a longitudinally-placed rear motor, rear-wheel drive set-up
• Long wheelbase design enables stable performance
• The angle of the skid-shaped underside has been increased to raise the car's off-road potential
• Features a newly-designed body moulded in tough polycarbonate material
• Includes a torque-tuned 540-brushed type motor and CVA shock units
• Includes ESC (Electronic Speed Controller)
• Fully independent double wishbone suspension
• Suitable for off-road terrain

• Two-channel radio, steering servo, 7.2-7.4volt battery with compatible charger, and Tamiya PS polycarbonate paint

• Length: 407mm, Width: 186mm, Height: 159mm
• Wheelbase: 257mm　
• Tyre Width/Diameter (Front and Rear): 27/69mm
• Bathtub-type Frame
• Shaft Driven 4WD
• Front/Rear 4-Bevel Resin Differentials
• 3-Piece Steering Tie-Rod
• 4-Wheel Double Wishbone Suspension
• Front/Rear Friction Dampers
• Gear Ratio = 9.58:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinion)
• Type 540 Motor

• Two-channel radio, steering servo, 7.2volt battery with compatible charger, and Tamiya PS polycarbonate paint

• Length: 425mm
• Height: 140mm
• Width: 225mm
• Wheelbase: 255mm
• Tread (F/R): 190mm
• Tire Width/Diameter: 23/83mm (Front), 38/88mm (Rear)
• ABS Frame Chassis
• Polycarbonate Body
• Rear Motor, Rear-Wheel Drive
• 3-Bevel Differential
• F/R Single Trailing Arm Suspension　
• F/R Aluminium Oil Dampers
• Gear Ratio＝1:7.54, 1:9.05
• Electronic Speed Control [ESC] & RS-540 Motor included.

This is a re-issued R/C assembly kit of the Hot Shot. It originally debuted in 1985 as Tamiya’s first 4WD off-road buggy.

An R/C Legend Returns
With its aggressive-looking body design and low center of gravity, the Hotshot, Tamiya's first shaft-driven 4WD R/C buggy, made waves when it was introduced in 1985. The unique 3-piece chassis included such innovative features as front/rear mono-shock oil dampers, 4-wheel double wishbone suspension equipped with stabilizers, and front/rear fully-enclosed gearboxes equipped with thrust ball bearings and differential gears. A wide array of Option Parts were produced especially for modifying the Hotshot, and the machine became something that every youth at that time dreamed of. Fans have clamored for a re-release of the epoch-making R/C car, and Tamiya now brings back this legend to let fans relive their childhood memories.

An Old Dog with New Tricks
Tamiya designers have given the Hotshot a makeover, replacing older, harder to assemble parts with modern equivalents but still keeping true to the spirit of the original Hotshot. While the front/rear double wishbone suspensions and adjustable mono-shock oil dampers remain the same, the drivetrain features modern dog bone type propeller shafts for enhanced reliability. The oil dampers have also been changed to the more modern diaphragm type. Also, with the use of a modern ESC, the original Hotshot's rear aluminum heat sink was no longer necessary. However, the Hotshot would not look the same without it, so our solution was to install a dummy part to remain faithful to the original look. Take this updated Hotshot out for a spin and compare it to today's R/C buggies to experience how far this hobby has developed!

Specifications
_Length: 390mm__Width: 235mm__Height: 150mm__Weight: 1270g__Tread: (Front/Rear) 194mm__Tire Width/Diameter: (Front) 28/82mm, (Rear) 34/82mm_ _Frame: ABS Resin Monocoque__Drivetrain: Shaft-driven 4WD__Diff. Gear: 3-bevel__Steering: 2-piece Tie Rod__Suspension: 4-wheel Double Wishbone_ _ Gear Ratio: 8.1_1, 10.04_1__Motor: Type RS540__Speed Controller: ESC

This 1/10 scale all-terrain 2WD buggy R/C assembly kit features a low centre of gravity bathtub frame, oil damper-equipped 4-wheel double wishbone suspension, and full ball bearings for an exciting high-performance package. The edgy, stylish body is made from durable, lightweight polycarbonate and its yellow paint scheme provides a great match for the grey-coloured dish wheels. Grooved front tyres and rear spike tyres ensure excellent traction on any surface.

DT-02 Chassis
The DT-02 machine is a simple 2WD chassis which features a straightforward, rugged design to ensure easy assembly and superb reliability, while its 4-wheel double wishbone suspension offers agile handling. Combining exciting performance with user-friendliness, the DT-02 chassis is the perfect way for R/C novices to start enjoying the wonderful hobby of Radio Control.

• Length: 384mm, Width: 248mm, Height: 140mm
• Wheelbase: 260mm
• Weight: 1042g
• Motor: Type 540
• Gear: 3-bevel diff
• Shock Damper: oil-filled damper
• Drivetrain: Rear-Wheel Drive
• Gear Ratio: 9.28:1
• With adjustable gear ratio
• Bearings: shielded ball bearing
• Body material: clear polycarbonate
• Chassis material: plastic
• Differential type: gear
• Suspension: 4-wheel Double Wishbone
• Fully independent double wishbone suspension
• Terrain Use: off-road
• Required To Complete: 2-channel radio, steering servo, 7.2volt battery & battery charger, and Tamiya PS paint.

• RC Midnight Pumpkin Metallic Special (with chrome effect body)
• 1/12 scale radio control assembly kit car
• Model dimensions: 385mm length, 290mm width, 260mm height
• The tyres are 115mm and overall model weight is approx 1.6kg
• Required to complete: 2-channel radio, steering servo, 7.2 volt battery and battery charger
• Includes forward & reverse Electronic Speed Controller (ESC)
• With 540-brushed type motor
• Front independent swing arm suspension
• Rolling rigid type rear suspension
• Large diameter one-piece wheels
• Steering rod with ball adjuster
• Box frame made from high-strength ABS resin
• Sealed gearbox with internal differential gear
• Includes a metal wheelie bar

• Overall length: 410mm, Width: 240mm, Height: 145mm, Wheelbase: 1,020mm
• Transmission type: rear 2WD
• Suspension: Front double wishbone. Rear trailing arm
• Tyre width/diameter: Front 21/73mm. Rear 51/88mm
• RS-540 Type motor included

• Two-channel radio, steering servo, 7.2volt battery with compatible charger, and Tamiya PS polycarbonate paint

• Length: 385mm, Width: 290mm, Height: 225mm
• Weight: 1,560g (not including R/C mechanism and battery) Wheelbase: 207mm
• Tread: 212mm (Front), 216mm (Rear)
• F/R Tyre Width/Diameter: 71/115mm
• ABS Box Type Frame
• Rear-wheel 2WD
• Suspension: Independent Swingarm (Front), Rolling Rigid (Rear)
• F/R Friction Dampers
• 3-Bevel Differentials
• Gear Ratio: 14.7:1
• Type 540 Motor
• Electronic Speed Controller (Included)

• Two-channel radio, steering servo, 7.2volt battery with compatible charger, and Tamiya TS paint

• 1/10 Scale
• Length: 389mm, width: 223mm, height: 135mm, weight: 830g
• 380 type motor (chassis compatible with 540 type motor - sold separately)
• Transmission Type: Rear 2-Wheel Drive
• Independent swing axle front suspension, rolling rigid axle rear suspension, friction dampers
• Sealed rear gearbox to protect diff gear during off-road running
• 3-piece assembly wheel, straight ribbed racing front tyres, paddle rear tyres
• Front and rear axle compatible with ball bearings (sold separately)

• Two-channel radio, steering servo, 7.2volt battery with compatible charger, and Tamiya PS polycarbonate paint

• 1/10 scale R/C model assembly kit. Length: 451mm, width: 186mm, height: 134mm
• Wheelbase: 257mm
• Durable 1.0mm-thick polycarbonate body
• The model utilizes the efficient shaft-driven 4WD TT-02 chassis which features superior adaptability and stability
• 10-spoke wheels moulded in Gun Metal are paired with tread pattern racing radial tyres
• Includes stickers and window masking tape for use in the painting process
• Includes 540 brushed motor and ESC

• Two-channel radio, steering servo, 7.2-7.4volt battery with compatible charger

• 1/10 scale R/C model assembly kit. Length: 457mm, width: 204mm, height: 138mm
• Wheelbase: 251mm (short)
• The form of the Porsche 911 Carrera RSR 2.8 is realistically recreated in lightweight polycarbonate (comes pre-painted in white with windows tinted in smoke)
• Silver colour wheels (front: narrow, rear: wide / rims and red wheel caps are separate) are paired with racing slick tyres
• Separate moulded plastic part recreates the side mirror
• Includes 540 brushed motor and ESC

• Two-channel radio, steering servo, 7.2-7.4volt battery with compatible charger, and Tamiya PS polycarbonate paint

This Bearing Set is by RCbearings to fit the Tamiya 57409 SW-01 SW01 Mini Lunchbox #54900.

This is a FULL COMPLETE set and will replace all bearings within the kit.

Bearing seal options available for this kit. Please choose bearing type from selection box.

METAL - Will last longer in clean conditions

RUBBER - Best used if exposed to dirt

The bearings come pre-lubricated, so all you have to do is fit them to your model.

This set contains

8 of 630

8 of 1060

4 of 1280

20 Bearings in TOTAL

Bearing sizes will be supplied clearly labelled for ease of fitting