Tamiya RC Kits - In stock

We welcome the DB01SR Chassis Kit with the Baldre body (Item 51338) included. This chassis kit creates a 2 belt-driven 4WD buggy with identical belts and includes Hop-Up Option parts for great off-road race performance!

About the Model

• This is a 1/10 scale R/C model assembly kit
• A slipper clutch (from Item 54018 DB01 Slipper Clutch Set) provides stable off-road drive
• The drivetrain is gear differentials
• The gear differentials (from Item 54329 DB01 Gear Differential Unit) feature steel bevel gears (from Item 54428 Steel Bevel Gears for TA06 Gear Differential Unit) which need less maintenance and are compatible with high-power motors
• Front and rear universal shafts ensure efficient drive and minimal disruption
• Front and rear hex hubs allow a wide choice of wheels and tyres
• Square-shaped battery packs can be installed
• Comes with a dedicated carrying case
• Detailed stickers, masking stickers, and Baldre body are included
• Please note motor, R/C equipment, battery pack, etc. are sold separately
• Carton quantity is 4 and EAN is 4950344587537

Separately Required Items

• ESC
• Transmitter and receiver
• Servo
• Motor
• Battery and charger
• LEDs

Hop-Up Option Parts Included
Item 54015 DB01 Assembly Universal Shaft (Front)
Item 54016 DB01 Assembly Universal Shaft (Rear)
Item 54668 4WD Buggy Aluminium Hex Hubs (Front)
Item 54669 Buggy Aluminium Hex Hubs (Rear)
Item 51580 4WD Buggy Front Dish Wheels (Hex Hub)
Item 51581 Buggy Rear Dish Wheels (Hex Hub)
Item 54211 TRF201 Rear Wing Set
Item 54140 DB01 Reinforced Drive Belt x2 sets

Photos of the Chassis
1) The kit comes with a polycarbonate body previously seen in the Baldre model.
2) Flat dish wheels pick up less mud and dirt, and are paired with dual block K tyres for great off-road grip.
3) One of two wing angles can be used. Switch between them by changing the wing mount direction.

This re-release version of the Monster Beetle assembly kit features a number of updates while keeping the basic layout of the original off-road car released in 1986. It features a realistic customised Beetle body depicted in tough polystyrene resin, with metal-plated parts supplied in the kit to add the finishing touch for handles and headlight frames. A resin driver figure is the icing on top of the cake!

Tough Space Frame Chassis
This hardy model's rear-wheel drive chassis is based around a durable ABS space frame to withstand all-action off-road driving. 4-wheel independent suspension uses CVA oil dampers, and has double wishbone front and trailing arm rear setups. Superlative cushioning and grip are provided by 130mm-diameter, 58mm-width lug pattern pin spike tyres on flashy gold colour plated wheels. Efficient and durable universal shafts come with rubber boots.

About the Model

• Length: 410mm
• Width: 285mm
• Height: 240mm
• Wheelbase: 247mm
• Tread: 220mm (Front); 225mm (Rear)
• Tyre Width/Diameter: 58mm/130mm 
• ABS Resin Space Frame 
• Rear-Wheel Drive 
• 3-Bevel Differential Gear 
• 2-Piece Steering Tie-Rod 
• Suspension: Double Wishbone (Front); Trailing Arm (Rear) 
• Oil Dampers 
• Gear Ratio = 14.7:1 
• Type 540 Motor 
• Electronic Speed Controller (Included)

Requires: Radio Control System with 1 Servo, 7.2v Battery & Charger, suitable Paint for the Bodyshell (optional), Tools for Assembly.

• Radio BX300 3Ch Radio Set
• Power HD Standard Servo
• Pink Performance (Round Cased Fits All Tamiya Models) Lipo Battery (Deans)
• Tamiya to Deans ESC/Battery Converter
• Gens Ace Lipo Balance Charger 10W (Needs any USB Source to charge) 0.8Amps Slow Charger
• Lipo Safe Charge Bag Included

After the release of Item 58725 1/10 R/C Squash Van (GF-02) in 2023, we welcome the second new model paired with the gear-driven 4WD GF-02 chassis. While the Squash Van is a retro, actual-car-like model inspired by 1950s American panel vans, this Quirkhopper's concept is a slim, insect-like buggy body. The word "quirk" means something strange, unique and unexpected. Enjoy off-road performance and customisation of this kit as you like!

About the Model

• This is a 1/10 scale R/C model assembly kit. Length: 400mm, width: 280mm, height: 175mm. Wheelbase 267mm
• Paint the 0.7mm thick lightweight, rigid polycarbonate body as you wish
• Features front with two headlights and rear wing integrated with large air intakes
• 123mm large-diameter tyres (the same tyres as the ones used for Item 58725) allow powerful performance and superior handling feel
• Includes dedicated stickers
• Carton quantity is 2 and EAN is 4950344587568

Separately Required Items

• What's included?
  • ESC 
  • Type 540 motor
• What's needed?
  • Transmitter & receiver
  • Servo
  • Battery and charger
  • Paint for the polycarbonate body
  • Tools to help with assembly of the kit

About the GF-02 chassis 
The gear-driven 4WD GF-02 chassis features its motor in a low, central position in the lightweight, durable monocoque frame, and transmits power to front and rear via gears. The long wheelbase and wide tread setup ensures stable off-road performance. The slim frame features ladder/pipe motifs and features integrated sealed gearboxes which help keep stones out. Front and rear gear differentials allow smooth cornering, while separately sold pinion gears offer a choice from three types of gear ratios, and a motor guard enhances reliability off-road. The 4-wheel double wishbone suspension employs four friction dampers, and the steering servo is positioned on the left with identical-length tie-rods.

Tamiya welcomes another racing car – this time, the Mercedes-Benz 190 E 2.5-16 EVO II 1991 – paired with our popular TT-02 chassis. This car took part in the German Touring Car Championship (DTM) in 1991. Based upon the compact Mercedes-Benz 190 E, it was given improved aerodynamics with components such as over fenders, front and rear spoilers and a large rear wing, and employed a 2.5-litre inline-4 DOHC engine capable of 340hp. In the same year, the works team car sponsored by German beer brand König Pilsener secured second place in the Championship and brought the Manufacturer’s Championship to Mercedes-Benz.

About the Model

• This is a 1/10 scale R/C model assembly kit.
• Length: 445mm, width: 184mm, height: 137mm. Wheelbase: 257mm
• The kit features an existing body
• The powerful form of the Mercedes-Benz 190 E 2.5-16 EVO II 1991 is captured in style by a lightweight, rigid 1.0mm thick polycarbonate body
• Separate black ABS plastic parts realistically depict side mirrors, rear wing, front grille and emblems
• The efficient shaft-driven 4WD TT-02 chassis features superior adaptability and stability
• Silver colour dish wheels are paired with racing slick tyres
• Comes with stickers and masking stickers for use in the paint job
• Carton quantity is 6 and EAN is 4950344587520

Separately Required Items

• Two-channel radio, steering servo, 7.2-7.4volt battery with compatible charger, and Tamiya PS polycarbonate paint

Photos of the Finished Vehicle
1) The long nose, short deck form is recreated in style by the polycarbonate body.
2) Metal-plated parts are used for the front grille and the bonnet three-pointed star emblem.
3) Side mirrors are separately moulded plastic parts, with plated components for the mirror surfaces.

1) Stickers are used for the rear lights with wrap-around turn signals.
2) The rear wing is depicted by two parts.
3) Silver colour dish wheels are paired with slick tyres.

This radio-controlled model assembly kit recreates the Audi R8 LMS 2008 with a stunning and highly detailed polycarbonate body. The kit is based on the beginner-friendly and highly customizable TT-02 chassis, which allows hobbyists to grow as their driving and building skills develop.

About the Audi R8 LMS
Based upon the Audi R8 sports car and conforming to GT3 regulations, the Audi R8 LMS was announced in 2008. A 5.2-litre V10 midship engine capable of over 500hp was mounted in a lightweight aluminium space frame. Body sections were modified, and the drivetrain was changed from 4WD to a rear-wheel drive system. From 2009 onward, this car was delivered to racing teams around the world and achieved many racing successes.

The TT-02 Chassis
The shaft driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to offer excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports. Mesh-type wheels are paired with racing slick tyres.

About the Model

• 1/10 scale R/C model assembly kit. Length: 434mm, width: 194mm, height: 120mm 
• Wheelbase: 257mm
• 1.0mm-thick polycarbonate body
• The efficient shaft-driven 4WD TT-02 chassis features superior adaptability and stability
• Black 16-spoke wheels are paired with racing slick tyres
• Includes stickers and window masking tape for use in the painting process
• Includes 540-Type Torque Tuned brushed motor and Hobbywing produced ESC

Separately Required Items

• Two-channel radio, steering servo, 7.2-7.4volt battery with compatible charger, and Tamiya PS polycarbonate paint

Photos of the Chassis
1) This image gives a closer look at the rear double-wishbone suspension with friction dampers.
2) Resin ball links in the steering linkage joints make for smooth, comfortable motion.
3) Wheel hubs are shaped to look like brake discs.

Photos of the Body1) The powerful form of the car is recreated by a lightweight and durable polycarbonate body.
2) Stickers are used to depict the front grille, headlights and bonnet air duct.
3) Black wheels have 16 fin spokes and are paired with slick tyres.

This radio-controlled model assembly kit recreates the Volkswagen Golf II GTI 16valve. The kit is based on the beginner-friendly and highly customizable BT-01 chassis, which allows hobbyists to grow as their driving and building skills develop. Like the full-size car it depicts, the chassis configuration on the MB-01 chassis is set up in the front motor, front drive configuration for unparalleled realism.

About the Golf II 16V
The FF drivetrain Golf is one of Volkswagen’s most iconic cars. From its first appearance in 1974, Volkswagen Golf continued to develop and lead the worldwide compact car class. In 1986, the Golf II GTI 16V was added to the second-generation model Golf II line up which had made its debut in 1983. With a 1,781cc inline-4 DOHC 16-valve engine, a tuned car took part in global rally races, and in the U.S. became a fan favourite hatchback of the 1980s era.

The MB-01 Chassis
The compact, 2WD MB-01 chassis gives a choice of three types of wheelbases, and a front- or rear- wheel drive system. Without removing battery pack, motor, and R/C equipment setups from the centre frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; low or high motor position can be chosen for rear-wheel drive cars. The 4-wheel double wishbone suspension features symmetrical structure and friction dampers. Unitized sections such as motor mount, final gears and suspension facilitate ease of assembly and effective maintenance.

About the Model

• 1/10 scale R/C model assembly kit. Length: 383mm, width: 170mm, height: 138mm
• Wheelbase: 239mm (Long)
• Polycarbonate body 
• Separate plastic parts moulded in black realistically depict side mirrors and bumpers
• Separate transparent parts capture headlights and taillights
• Porous dish wheels are paired with radial tyres
• Includes 540-Type Torque Tuned brushed motor and Hobbywing produced ESC

Separately Required Items

• Two-channel radio, steering servo, 7.2-7.4volt battery with compatible charger, and Tamiya PS polycarbonate paint

Photos of the Chassis
1) The compact MB-01 chassis. For this model, it is assembled with a long wheelbase: 239mm.
2) The servo is installed in the front-left of the model.
3) The sub-deck spacer makes the chassis wheelbase 239mm.

Photos of the Body
1) The iconic Golf form is captured in style.
2) Dish wheels are paired with treaded 60D radial tyres. Stickers recreate black fender arches.
3) Headlights can be lit up with separately sold LEDs. The front bumper is a separately moulded part.

This radio-controlled model assembly kit recreates the Porsche 911 GT3 R (992) with a stunning and highly detailed polycarbonate body. The kit is based on the beginner-friendly and highly customizable TT-02 chassis, which allows hobbyists to grow as their driving and building skills develop.

About the Porsche
The full-size Porsche 911 GT3 R (992) is a car which was developed to conform to GT3 race regulations. It is used by customer teams around the world that compete globally in races such as the Fanatec GT World Challenge Powered by AWS and the SRO Motorsports Group in Europe, North America, Asia, and Australia. The harmonious shape of the 911 emphasizes its heritage while combining it with sophisticated new efficiency. Functionality is paramount too! The body is made of particularly lightweight carbon to reduce vehicle weight. The result: increased agility and precision unparalleled throughout GT racing. The perfect starting point for success on the racetrack. With its increased displacement, the heart of the vehicle – the water-cooled six-cylinder naturally aspirated boxer engine – can achieve up to 416 kW (565 hp). Its purpose is clear: race to win.

The TT-02 Chassis
Adaptable TT-02 Chassis offers balanced shaft driven 4WD:
The shaft driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to offer excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports. Mesh-type wheels are paired with racing slick tyres.

About the Model

• 1/10 scale R/C model assembly kit. Length: 479mm, width: 188mm, height: 127mm (approximate) 
• Wheelbase: 251mm (short)
• Polycarbonate body with separate polycarbonate rear wing and light case details
• Separate plastic parts moulded in black realistically depict side mirrors and wing stays
• The model utilizes the shaft-driven 4WD TT-02 chassis which features superior adaptability and stability
• Black mesh-type wheels are paired with slick tyres
• Includes Item 51226 (Urethane Bumper L (TT-01, TGS)) to keep the body in top condition
• Includes stickers and window masking tape for use in the painting process
• Includes 540-Type Torque Tuned brushed motor and Hobbywing produced ESC

Separately Required Items

• Two-channel radio, steering servo, 7.2-7.4volt battery with compatible charger, and Tamiya PS polycarbonate paint

Photos of the Body
1) The mesmerising form of this modern race-spec 911 is captured by a polycarbonate body.
2) Black mesh type wheels have stickers for the silver rim detail.
3) Stickers depict rear combination lights, centre twin exhausts, air outlets and more.

Tamiya classic car R/C replicas are a fan favourite! This assembly kit recreates another 1990’s era favourite with the addition of the Toyota Celica GT-FOUR (ST205) on our easy to assemble and drive TT-02 chassis.

About the Toyota Celica GT-FOUR
Toyota developed this high-spec version of the sixth generation Celica with the aim of repeating in 1994 their global rally championship of the previous year. It possessed curved, aerodynamic body lines, a distinctive front with four headlights of different sizes, and a 2 litre 4 cylinder DOHC turbo engine capable of 255hp. The 4WD system utilized a centre viscous coupling and a Torsen differential at the rear for superior traction. Also, 2,100 Japanese models featuring an arched rear spoiler were produced to the acclaim of Celica fans.

• 1/10 scale R/C model assembly kit. Length: 451mm, width: 186mm, height: 134mm. Wheelbase: 257mm.
• Durable 1.0mm-thick polycarbonate body.
• The model utilizes the efficient shaft-driven 4WD TT-02 chassis, which features superior adaptability and stability.
• 10-spoke wheels moulded in Gun Metal are paired with tread pattern racing radial tires.
• Comes with stickers and window masking stickers for use in the paint job.
• Includes 540 brushed motor and ESC.
• Required to complete: 2-channel radio, servo, 7.2 volt battery with compatible charger, and Tamiya PS paints.

The year 2024 marks the 40th anniversary of the original release of the iconic Hornet off-road buggy! To celebrate the milestone, Tamiya’s designers have cooked up a fun variant that is sure to please new hobbyists and veteran hobbyists alike! Make sure to watch Tomley RC's YouTube Video all about the Hornet Evo!

• 1/10 scale R/C model assembly kit.
• The 0.7mm thick polycarbonate body has the same shape as the classic body from the original Hornet.
• The 2WD chassis has the same bathtub frame as the one used in the original Hornet. (Item 58336)
• While the colour scheme of the original Hornet is carried over, this kit features an updated sticker design.
• Includes 540 Brushed motor and ESC.
• Required to complete: 2-channel radio, steering servo, 7.2 volt battery with compatible charger, and Tamiya PS paints.

New EVO Features!

• Suspension: 4-wheel independent double wishbone suspension.
• Rear gearbox: Sealed gearbox with differential gear from the DT-02 chassis.
• Includes full ball bearings!
• CVA oil dampers (front & rear)

Tamiya Release Date: End of August 2024

The 2WD BT-01 chassis – which offers choices of FF/MR/FR drive system – welcomes another R/C kit; this time, a short wheelbase, midship rear motor / rear wheel drive (MR) setup with the body which recreates the Porsche 911 Carrera RSR 2.8. The Porsche Carrera RS 2.7 is a legend of the Porsche 911 series. Developed to join European GT races in 1973, it employed a 2,687cc horizontally opposed 6-cylinder engine capable of 210hp, a lightweight body with improved aerodynamics, and wide rear tires. The Carrera RSR 2.8 racing version increased displacement to 2,808cc and output to over 300hp; in 1973, it was a European GT race champion and took numerous global victories

About the Model
This is a 1/10 scale R/C model assembly kit. Length: 457mm, width: 204mm, height: 138mm.

Wheelbase:
251mm. (Short)
The form of the Porsche 911 Carrera RSR 2.8 is realistically recreated in lightweight polycarbonate. Silver colour wheels (front: narrow, rear: wide / rims and red wheel caps are separate) are paired with racing slick tires (front: Item 50454, rear: Item 50547). Please note that the kit does not have the inner sponges for either front or rear. A separate moulded plastic part recreates the side mirror.
Link to parts list for BT-01 https://www.tamiya.com/cms/english/rc/catalogs/BT-01_parts_catalog.pdf

The 2WD BT-01 chassis gives a choice of two types of wheelbase, and front- or rear- wheel drive system. Without removing battery pack, motor and R/C equipment setups from the centre frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; front (FR) or midship rear (MR) motor position can be chosen for rear-wheel drive cars. The 4-wheel double wishbone suspension features symmetrical structure and friction dampers. Unitized sections such as motor mount, final gears and suspension facilitate ease of assembly and effective maintenance.

Type 540 motor and ESC included.

This R/C assembly kit recreates the Citroën DS which made its debut in 1955 and caught people’s attention with its innovative structure and style. Over 1,450,000 were sold up to 1975, and it became one of the better-known cars of the 20th century. This car was used as the official car for the President of France and achieved the overall championship in 1966 global rallies. The version recreated in this assembly kit recreates the early-period model featuring two rounded headlights. The polycarbonate body sits on top of the MB-01 chassis configured in the long wheelbase and front motor / front-wheel drive (FF) configuration.

The MB-01 Chassis
The compact, 2WD MB-01 chassis gives a choice of three types of wheelbase, and front- or rear- wheel drive system. This model employs a front-wheel drive setup. The 4-wheel double wishbone suspension features symmetrical structure and friction dampers. Unitized sections such as motor mount, final gears and suspension facilitate ease of assembly and effective maintenance. What is more, without removing battery pack, motor and R/C equipment setups from the centre frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; low or high motor position can be chosen for rear-wheel drive cars.

About The Model

• Length: 412mm, width: 197mm, height: 137mm 
• Wheelbase: 239mm (Long) 
• Tread: 148mm (front), 140mm (rear) 
• Tire width/diameter: 25/59mm (front & rear) 
• Bathtub type chassis 
• Front-midship motor, front-wheel drive 
• 4-bevel differential gear 
• 3-piece steering tie-rod 
• 4-wheel double wishbone suspension 
• Friction dampers 
• Gear ratio = 5.83:1 (using kit 29T pinion) 
• Type 540 motor 
• ESC included 

Separately Required Items

• Two-channel radio, steering servo, 7.2-7.4volt battery with compatible charger, and Tamiya PS polycarbonate paint

Tamiya Release Date: 22/12/2023

The Alfa Romeo Giulia Sprint GTA Club Racer makes an appearance on the new and versatile MB-01 chassis platform. This time around the MB-01 is configured to be the middle wheelbase with midship rear motor/rear wheel drive (MR) specification. The Alfa Romeo Giulia Sprint GTA was developed as the lightweight, tuned race version of the 2-door coupe Giulia Sprint GT and released in 1965. 500 units were produced and in the late 1960s the works car became class champion several times in the European Touring Car Championship; also run by other racing teams, it caught a lot of attention at the racetrack!

The MB-01 Chassis
The compact, 2WD MB-01 chassis gives a choice of three types of wheelbases, and front- or rear- wheel drive system. This model employs a midship motor, rear-wheel drive setup. Without removing battery pack, motor, and R/C equipment setups from the centre frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; low or high motor position can be chosen for rear-wheel drive cars. The 4-wheel double wishbone suspension features symmetrical structure and friction dampers. Unitized sections such as motor mount, final gears and suspension facilitate ease of assembly and effective maintenance.

• 1/10 scale R/C model assembly kit. Length: 385mm, width: 167mm, height: 132mm. Wheelbase: 225mm (Middle wheelbase).
• The form of the Alfa Romeo Giulia Sprint GTA Club Racer is recreated in lightweight polycarbonate.
• Features 60mm front and rear tires.
• This kit includes livery stickers to create a design inspired by the numerous amateur club racers.
• Includes 540-Type brushed motor and ESC.
• Required to complete: 2-channel radio, steering servo, 7.2-7.4volt battery with compatible charger, and Tamiya PS paint.

Here is another R/C kit with the MB-01 chassis – this time, long wheelbase and midship rear motor / rear wheel drive (MR). The Opel Kadett GT/E released in 1975 was a high-spec version of the Opel Kadett, a car which enjoyed great popularity in Europe in the 1970s. The GT/E had a 2-door coupe body, a high-spec 1.9 litre engine and reinforced suspension; the works Opel Eurohändler team, satellite teams and privateers took part in rally races with modified versions of this car, and in 1976 it secured second place in the manufacturer’s championship in global rally races.

About the Model

• This is a 1/10 scale R/C model assembly kit. Length: 417mm, width: 174mm, height: 138mm. Wheelbase: 239mm (Long wheelbase).
• The form of the Opel Kadett GT/E is authentically recreated in lightweight polycarbonate, and the colour scheme of the works Opel Eurohändler team is employed.
• Features 60mm front and rear tires. Use 60D tires when changing tires.

About the MB-01 chassis
The compact, 2WD MB-01 chassis gives a choice of three types of wheelbase, and front- or rear- wheel drive system. Without removing battery pack, motor and R/C equipment setups from the centre frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; low or high motor position can be chosen for rear-wheel drive cars. The 4-wheel double wishbone suspension features symmetrical structure and friction dampers. Unitized sections such as motor mount, final gears and suspension facilitate ease of assembly and effective maintenance.

This R/C model assembly kit recreates the 2002 Mercedes-Benz CLK AMG Racing Version and is based on our popular TT-02 chassis. The body used in this kit was last seen on product 58296 CLK-DTM 2002 AMG-Mercedes on the TL-01LA chassis from 2002. It’s now being used to create the iconic race car as it appeared as the homologation version which inherits the racecar's powerful form with enlarged over fenders and rear wing, without sponsor logos.

Adaptable TT-02 Chassis
The shaft driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to offer excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports.

About The Model

• 1/10 scale R/C model assembly kit. Length: 444mm, width: 185mm, height: 125mm. Wheelbase: 257mm
• Lightweight, durable 1.0mm thick polycarbonate body
• Separate parts realistically depict side mirrors and rear wing
• The model utilizes the shaft-driven 4WD TT-02 chassis which features superior adaptability and stability
• 16-spoke silver colour wheels are paired with racing slick tyres
• Comes with stickers and window masking tape for use in the paint job.
•  Includes ESC and motor

Separately Required Items

• Two-channel radio, steering servo, 7.2-7.4volt battery with compatible charger, and Tamiya PS polycarbonate paint

Tamiya Release Date: Due early August 2023

The origin of M-chassis series history goes back to December 1994, and this series has been popular due to cost-effective kits with a wide choice of bodies, ease of maintenance and control for any level user. Enter, the all-new MB-01!

The new MB-01 chassis continues that tradition and allows six setups by choosing from three types of wheelbases, and front- or rear- wheel drive system. Its first body recreates the Fiat Abarth 1000 TCR Berlina Corse which was a car developed with high level tune-ups based upon the compact 2-door Fiat 600.

MB-01 Chassis Features

• Length: 322mm, width: 163mm. Wheelbase: 209mm (S) / 224mm (M) / 239mm (L) (*Fiat Abarth uses the LONG wheelbase setup).
• The multi-purpose, 2WD MB-01 chassis gives choices of three types of wheelbases (*), and front- or rear- wheel drive system. Six setups are available in total.
• Simply change attachment directions of final gears and steering linkage to switch between front- and rear- wheel drive; low or high motor position can be chosen for rear-wheel drive cars.
• Unitized sections such as motor mount and final gears facilitate ease of assembly and effective maintenance.
• The 4-wheel double wishbone suspension features symmetrical structure and friction dampers.
• While this is a 2WD model, multi-link suspension is compatible with tires featuring the same compound and rear tire with toe-in as 4WD models.
• Gear ratio: 5.83:1 (when using kit-standard 29T pinion gear)
• Features 55mm diameter front tires and 60mm diameter rear tires to authentically recreate the stance of the actual car.
• Many Hop-Up Option parts for M-chassis and TT-chassis cars can be used to fine-tune setup.
• Includes 540 motor and ESC.
• Requires 2-channel radio, 7.2-7.4volt battery with compatible charger and Tamiya PS paint to complete.

This R/C car recreates the Mitsubishi Lancer Evolution V as a 1/10 R/C model assembly kit based on our popular TT-02 chassis. The Mitsubishi Lancer Evolution 5th generation model took part in global rally races in 1998 and achieved both Maker’s and Driver’s Championships. This car featured a powerful body with bulging fenders, louvers and air intakes on the hood, and rear wing. This kit depicts it as a road car.

Adaptable TT-02 Chassis offers balanced shaft driven 4WD
The shaft driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to offer excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports.

• 1/10 scale R/C model assembly kit. Length: 445mm, width: 185mm, height: 145mm. Wheelbase: 257mm.
• Lightweight, durable 1.0mm thick polycarbonate body.
• Separate ABS plastic parts realistically depict side mirrors and rear wing.
• The model utilizes the shaft-driven 4WD TT-02 chassis which features ease of assembly, superior adaptability and stability.
• 12-spoke silver wheels are paired with tread patterned racing radial tires.
• Comes with stickers and window masking stickers for use in the painting process.
• Includes 540-size motor and ESC.
• Requires: 2-channel radio, steering servo, 7.2-7.4volt battery with compatible charger, and Tamiya PS paint to complete.

This R/C model assembly kit recreates the Porsche 911 GT3 (992) with a stunning and highly detailed polycarbonate body. The kit is based on the beginner friendly and highly customizable TT-02 chassis. The full-size 7th generation model, Porsche 911 GT3 features double-wishbone front suspension – changed from MacPherson strut – and a horizontally opposed 6-cylinder engine. Lightweight components and aerodynamic design extensively improved its performance. Carbon fibre reinforced plastic front hood, which was employed for production vehicles for the first time, gives lightweight design. Also, hanging type wing stay supply greater downforce and lower drag.

Adaptable TT-02 Chassis offers balanced shaft driven 4WD
The shaft driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to offer excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports. Mesh-type wheels are paired with racing slick tires.

• 1/10 scale R/C model assembly kit. Length: 467mm, width: 188mm, height: 131mm
• Wheelbase: 251mm (Short-size wheelbase spec).
• Lightweight, durable polycarbonate body with separate polycarbonate rear wing and light cases.
• Separate plastic parts moulded in black realistically depict side mirrors and wing stays.
• The model uses the shaft-driven 4WD TT-02 chassis which features superior adaptability and stability.
• Dark gun metal colour spoke wheels are paired with racing radial tires.
• Includes ESC and motor.
• Comes with trim detail stickers and window masking tape for use in the paint process.
• Requires 2-channel radio, steering servo, 7.2-7.4volt battery with compatible charger and Tamiya PS paint to complete.

Unleashed on the world at the 2018 Geneva International Motor Show, this super car bears the name of legendary racer Ayrton Senna. Its body features extensive carbon fibre sections, and is designed for impeccable aerodynamics and cooling. Power is provided by an 800PS 4-litre V8 twin turbo engine. With only 500 produced, the McLaren Senna is hot property indeed.

Tamiya has recreated this legendary supercar as a radio control model in 1/10 scale. The body has been faithfully captured in polycarbonate while the rear wing and rearview mirrors are recreated with ABS plastic. Furthermore, the body sits on top of our easy-to-assemble TT-02 chassis.

TT-02: Adaptable, balanced shaft driven 4WD
The shaft-driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to give excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports.

About the Kit

• 1/10 scale R/C model assembly kit. Length: 466mm, width: 194.6mm, height: 118mm. Wheelbase: 257mm
• The complex, aerodynamically honed form of the McLaren Senna is captured in polycarbonate with dedicated black ABS side mirrors and rear wing
• Based upon the shaft-driven 4WD TT-02 chassis which gives high adaptability with various kinds of setups
• Includes Large Urethane Bumper L (Item 51226) which helps protect your model
• 10-spoke wheels moulded in Gun Metal are paired with racing radial tyres (Item 50419)
• Body requires painting, cutting out, attachment of parts, application of stickers, and other work
• Includes 540-type brushed motor and ESC
• Requires: 2-channel radio, servo, 7.2-7.4volt battery with charger, and Tamiya PS paint to complete

This R/C model assembly kit recreates the 2020 Ford GT Mk II track-only supercar. The MK II was built to celebrate Fords race winning heritage at Le Mans which was accomplished with the legendary GT40 MKII back in 1966. This version of the Ford GT will be limited to 45 hand-built machines, but the Tamiya R/C version is available for all fans!

The accurately depicted Ford GT MK II body is made of polycarbonate and ABS plastic wing and mirror pieces, which sits on top of our most builder user friendly TT-02 entry-level on-road chassis.

TT-02: Adaptable, balanced shaft driven 4WD
The shaft-driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to give excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports. Gun metal color 10-spoke wheels and slick tires make for a racy finish.

• 1/10 scale R/C model assembly kit. Length: 479mm, width: 188mm, height: 112mm. Wheelbase: 257mm.
• The ultra-honed form of the car is recreated in lightweight polycarbonate, with separate parts used to depict flying buttresses, rear wing and side mirrors.
• Body is made of polycarbonate with ABS plastic wing and mirror parts.
• Stickers are included to decorate the body as the car appeared in its unveiling.
• Twin five-spoke wheels with slick tires.
• The TT-02 chassis is a highly versatile shaft-driven 4WD unit, based around a durable bathtub.
• 4-wheel independent double wishbone suspension has identical arm and upright parts for ease of maintenance.
• A wide range of Hop-Up Option parts is available to customize your chassis.
• Includes 540-brushed type motor.
• Includes NEW TBLE-04S ESC. Compatible with brushless motors (sensored) of 21.5 turns and higher, and Tamiya brushed motors 25 turns and over.
• Requires: 2-channel radio, steering servo, 7.2-7.4volt battery pack and compatible charger, and Tamiya PS paint.

Since the first generation model release in 1951, the Toyota Land Cruiser has been one of the most famous 4WD vehicles in the world. This R/C model assembly kit recreates the Land Cruiser 300 series announced in 2021. The polycarbonate body realistically depicts the eye-catching, dignified form with separate parts to capture the distinctive large front grille's horizontal fins and metal-plated sections. Light case and door mirror components are metal-plated, and door handles and shark fin antenna on the roof are rendered by separate parts for more realism. Silver colour 12-spoke wheels are paired with block pattern tyres.

CC-02 Chassis - Off Road, Evolved
Designed for a wide range of off-road scenes including rocky terrain, the CC-02 chassis' ladder frame is inspired by full-size vehicles and is the base for its superior durability. A 4WD setup employs the motor longitudinally behind the front axle with separated gearbox and transfer case, and propeller shafts transmitting power to the differential gears front and rear. Four-link rigid suspension is employed front and rear, with CVA oil dampers for all-encompassing control, even on tricky rock sections. This model comes with silver colour twelve-spoke wheels and grippy block pattern tyres.

About The Model

• Length: 472mm, width: 200mm, height: 192mm
• Wheelbase: 267mm　
• Tread: 160mm (front), 163mm (rear)
• Tyre width/diameter: 33/90mm (front & rear) 
• Ladder frame
• Longitudinal motor, shaft-driven 4WD
• 3-bevel differential gears
• 4-link rigid suspension (front & rear) & CVA oil dampers
• Gear ratio = 17.33:1 (using kit-standard 16T pinion)
• Type 540 motor
• Electronic Speed Controller (ESC) is sold separately

Separately Required Items

• Two-channel radio, ESC, steering servo, 7.2-7.4volt battery with compatible charger, and Tamiya PS polycarbonate paint

This R/C model assembly kit recreates the classic Ford Escort Mk.II in rally racing form. It was a RAC Rally Champion from 1975-1979. The pre-painted body sits on top the Tamiya MF-01X chassis that is capable both on asphalt and flat dirt surfaces.

MF-01X Chassis
Based around a tough monocoque frame with integrated gearboxes, this compact 4WD chassis gives a thrilling drive whether you take it on road or flat dirt surfaces. It features a rear-mounted motor, with gear-driven rear wheels and a propeller shaft taking power to the front. Both front and rear gearboxes have differential gears. The battery pack location in the chassis centre secures excellent balance, while 4-wheel independent double wishbone suspension employs friction dampers. Rally Block tyres with width/diameter of 27/69mm are also included.

About the Model

• 1/10 scale R/C model assembly kit.
• Length: 414mm. Width: 172mm. Height: 135mm
• Wheelbase: 239mm (L)
• Tyre Width/Diameter (Front & Rear): 26/60mm
• Tread (Front & Rear): 138mm
• Polycarbonate body pre-painted in White.
• Separately moulded plastic components are included to recreate bumper, side mirrors and fog lamps.
• Polycarbonate front and rear light cases are compatible with separately sold Tamiya 5mm LEDs.
• Stickers are included to recreate blue livery sections, sponsor logos and more.
• The MF-01X is at home on-road or on flat dirt, thanks to 4-wheel double wishbone suspension.
• Power from the rear mounted motor is transmitted by gear differential to the rear wheels, and via a propeller shaft to the front. The chassis can be converted to S and M wheelbases with separately sold propeller shafts.
• A host of Hop-Up Option parts are available to tune the MF-01X chassis.
• Tamiya Torque Tuned Motor included.

Separately Required Items

• Two-channel radio, steering servo, 7.2volt battery with compatible charger, and Tamiya PS polycarbonate paint

Photos of the Model
1) The iconic boxy form of this two-door legend is rendered artfully in polycarbonate, pre-painted white.
2) Eight-spoke light blue wheels are paired with 60mm-diameter, 26mm-width rally block tyres for great grip.
3) Plenty of separately moulded parts up the realism - spotlights, headlight cases, bumper and side mirrors.

1) A slimline three-piece monocoque forms the centrepiece of the MF-01X chassis, and the propeller shaft is positioned to the right.
2) This chassis features highly capable 4-wheel independent double wishbone suspension, with friction dampers front and rear.
3) Why not employ the separately sold Tamiya LED Light Unit to add even more realism to your Escort Mk.II Rally?

Tamiya is no stranger to recreating classic cars from different eras! This specific kit recreates a true classic in the form of the Volkswagen Karmann Ghia. The Karmann Ghia was a stylish coupé based upon the same platform as the legendary Beetle. Its body was designed by Italian firm Ghia and manufactured by the German company Karmann. The polycarbonate body in this replica sits on top of the Tamiya RWD M-06 chassis.

Great RR Performance from the M-06
The M-06 chassis features a rear-mounted motor, rear-drive setup and features a longitudinally-mounted battery pack, with R/C equipment positioned on either side for optimum balance and a low center of gravity. 4-wheel double wishbone suspension uses metal-plated wheels, equipped with 60D radial tires at the front and 60D super grip tires at the rear. In addition, a 3-piece steering linkage offers nimble handling response. A large bumper is included.

• 1/10 scale R/C model assembly kit. Length: 410mm, width: 182mm, height: 125mm.
• Lightweight and durable polycarbonate. Separate plated parts depict side mirror, bumpers and light cases.
• Includes marking stickers, and window masking stickers for use during the painting process.
• The M-06 chassis features a rear-motor, RWD setup with a longitudinally-mounted battery pack and R/C units positioned on either side for optimum balance and a low center of gravity.
• This model utilizes the 239mm wheelbase M-06L chassis.
• Metal-plated wheels paired with front radial and rear super grip radials for superior stability and sharp handling.
• A host of Hop-Up Option parts are available to customize the chassis to your driving needs.
• Includes Tamiya 540-motor.
• Includes: Tamiya TBLE-02S ESC (electronic speed control) Capable of running sensor brushless motors and brushed motors alike. (21.5 Turn BL motor limit) (23 Turn brushed motor limit)
• Required Items: 2-Channerl radio, steering servo, 7.2volt battery pack with compatible charger, and Tamiya PS paint.

Inspired by the Ford Shelby GT350R-C, the Ford Mustang GT4 has been designed and engineered jointly by Ford Performance and Multimatic Motorsports to compete in sports car championship racing series globally, including the IMSA Continental Tyre SportsCar Challenge, Pirelli World Challenge GTS/GT4, and GT4 European Series.

The Tamiya Ford GT4 faithfully captures this sleek racing car as a 1/10 scale radio control replica. The highly-detailed polycarbonate body sits atop the easy-to-build Tamiya TT-02 chassis that you can customize for added performance!

TT-02 Chassis
The shaft-driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to give excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports.

About The Model

• 1/10 scale R/C model assembly kit. Length: 459mm
• Polycarbonate body was designed with access to the actual car’s CAD data for superb accuracy. Front and rear light cases are also moulded in polycarbonate
• Wheel arches are pre-cut out for a simpler body assembly experience
• The beginner-friendly, highly adaptable TT-02 is a versatile and easy to maintain shaft-driven 4WD chassis
• Separately moulded plastic components depict rear wing and side mirrors
• Racy 10-spoke wheels are moulded in gun metal and paired with slick tyres
• Stickers are included to create an original livery, as are masking stickers for use when painting
• Includes Tamiya Torque Tuned Motor
• Includes Tamiya TBLE-02S ESC (electronic speed control) capable of running sensor brushless motors and brushed motors alike (21.5 Turn BL motor limit / 23 Turn brushed motor limit)

Separately Required Items

• Two-channel radio, steering servo, 7.2-7.4volt battery with compatible charger, and Tamiya PS polycarbonate paint

This R/C assembly car kit replicates the Lancia Rally 037 as raced in the early 1980s. The highly detailed body is made of durable ABS plastic, and it sits on top of Tamiya’s TA-02 S chassis.

The Lancia body is specifically mounted on a TA-02 variant. Known as the TA-02S, this version exhibits a short-wheelbase to accommodate the scale form of the real sports car. It features a tub chassis with 4-wheel, fully independent suspension coupled with a rear ball differential and a front gear type differential.

About The Model

• 1/10 scale R/C model assembly kit. Length: 422mm, width: 186mm, height: 132mm
• The injection moulded body offers a highly realistic recreation of the 037 
• Comes with metal-plated light cases for headlights, taillights and fog lamps 
• Side mirrors and windscreen wipers are made using separate parts
• The interior features depictions of driver & co-driver, plus dashboard
• The TA02S chassis is a shaft-driven 4WD unit with bathtub frame, a rear ball diff and front gear diff
• Four-wheel independent double-wishbone suspension is paired with CVA oil shock dampers
• New front bumper and sticker sheet
• Compatible with standard Type 540 motors
• Includes 540-Type brushed motor
• Includes Tamiya TBLE-02S ESC (electronic speed control) capable of running sensored brushless motors and brushed motors alike (21.5 Turn BL motor limit, 23 Turn brushed motor limit)

Separately Required Items

• Two-channel radio, steering servo, 7.2volt battery with compatible charger, and Tamiya PS polycarbonate paint

This R/C assembly car kit replicates the iconic Nissan Skyline GT-R (R32). The highly detailed polycarbonate body sits on top of Tamiya’s easy to build and maintain TT-02D chassis.

The TT-0D chassis allows you to enjoy the thrill of drifting thanks to the specially tuned drift spec version of the TT-02 chassis. The chassis features drift spec parts such as 24mm width drift tires (paired with stylish matte-finish metal-plated wheels), and CVA shock units on the 4-wheel double wishbone suspension. Full ball bearings, an aluminum motor heat sink, and a sport-tuned motor come as standard to further enable drifting fun! Of course, the chassis retains the original TT-02's excellent drivability, ease of maintenance, and adaptability.

• 1/10 scale R/C model assembly kit. Length: 452mm.
• LED lights included.
• Polycarbonate body
• ABS molded parts included in the kit to recreate side mirrors and rear wing.
• Marking detail stickers to decorate the car included.
• Shaft-driven 4WD entry level chassis. Compatible with TT-02 option parts.
• Comes with 24mm width drift-spec tires on mesh wheels, CVA oil dampers, full ball bearings, a sport-tuned motor, and aluminum motor heat sink.
• Includes 540-type Sport-Tuned brushed motor.
• Includes Tamiya TBLE-02S ESC (electronic speed control) Capable of running sensor brushless motors and brushed motors alike. (21.5 Turn BL motor limit) (23 Turn brushed motor limit)
• Requires: 2-channel radio, steering servo, 7.2volt battery & battery charger, and Tamiya PS spray paint.

This R/C model assembly kit recreates the classic Volkswagen Beetle in rally racing form. Thanks to its superlative reliability and uncomplicated upkeep, it was a fixture on the global rally circuit from the 1950s through to the 1980s, and this model is inspired by such rallying Beetles. The VW body sits atop Tamiya’s proven shaft-driven 4WD MF-01X chassis, which is at home on a range of surfaces from road to flat dirt.

• 1/10 scale R/C model assembly kit. Length: 397mm, width: 163mm.
• The model uses the 239mm L wheelbase.
• Body is made of polycarbonate. Bumpers and side mirrors are recreated using separate metal-plated parts.
• Front light pods and rally-style stickers included. Includes Rally block tyres.
• The MF-01X is at home on-road or on flat dirt, thanks to 4-wheel double wishbone suspension.
•  Power from the rear mounted motor is transmitted by gear differential to the rear wheels, and via a propeller shaft to the front.
• The chassis can be assembled into S and M wheelbases using separately sold propeller shafts.
• A host of Hop-Up Option parts are available to tune the MF-01X chassis.
• Requires: 2-channel radio, steering servo, 7.2volt battery & battery charger, and Tamiya PS Paint.