TAMIYA R/C KITS

• Length: 347mm, Width: 170mm, Height: 215mm
• Wheelbase: 225mm (M)
• Tyre Width/Diameter (Front & Rear): 27/69mm
• Tread (Front & Rear): 138mm
• Monocoque Frame
• Shaft-Driven 4WD
• 3-Bevel Differential Gears
• 2-Piece Steering Tie-Rod
• 4-Wheel Double Wishbone Suspension
• Front & Rear Friction Dampers
• Gear Ratio = 9.5:1
• Type 540 Motor

• Two-channel radio, electronic speed controller (ESC), steering servo, 7.2volt battery with compatible charger, and Tamiya PS polycarbonate paint

This assembly kit R/C truck features a stylish body inspired by the breathtaking, exciting low form of U.S. stadium racing trucks. Made from lightweight and durable polycarbonate, it features a rear wing, and can be decorated using the flashy markings included in the kit. The chassis provides suitably dynamic driving fun, and is mounted with front and rear wheels of differing offset, mounted with radial semi-pneumatic tires for a stable ride. The DT-03T platform is intended as an easy-to-get-started chassis to encourage young drivers to enter the world of R/C. Its intuitive yet tough design allows hassle-free assembly and gives less experienced users the opportunity to get to grips with R/C model composition and construction.

About the DT-03 chassis
The stylish slimline form of this chassis stems from its lightweight yet durable monocoque frame, which features a longitudinally-positioned battery and the R/C equipment along the centerline for excellent balance. The combination of a long 287mm wheelbase and 4-wheel double wishbone suspension married to CVA oil dampers with long arms at a 25-degree attachment angle, allows the model to handle with stability on poor surfaces. The rear-positioned gearbox is sealed to protect from dust and dirt, with the built-in differential gear offering smooth cornering.

Tuned for Success
This is an R/C model assembly kit of the R34 GT-R Z-tune, which debuted at the 2005 Tokyo Auto Salon, wowing visitors with its blend of looks and performance. The model recreates the car's form in polycarbonate, capturing its wide front and rear fenders, front bumper-side and bonnet outlets - all high-performance hallmarks of NISMO, the motorsports arm of Nissan which constructed each of the 20 cars in the limited edition production individually by hand. The TT-02D is a drift spec shaft driven 4WD chassis which offers thrilling drift action!

Adaptable & Balanced TT-02 Chassis Drift Version
Enjoy the thrill of drifting with this specially tuned drift spec version of the TT-02 chassis. The chassis also features drift spec parts such as 24mm width drift tires (fitted to stylish matte-finish metal-plated wheels), and CVA shock units on the 4-wheel double wishbone suspension. Full ball bearings, an aluminum motor heat sink, and a sport-tuned motor come as standard. Of course, the chassis retains the original TT-02's excellent drivability, ease of maintenance, and adaptability.

Specifications
_Length: 442mm, Width: 187mm, Height: 134mm _Wheelbase: 257mm__Tire Width/Diameter (Front & Rear): 24/63mm _Bathtub-type Frame _Shaft Driven 4WD _Front/Rear 4-Bevel Resin Differentials _3-Piece Steering Tie-Rod
_4-Wheel Double Wishbone Suspension _Front/Rear CVA Oil Shocks _Gear Ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinion) _Type 540 Sport-Tuned Motor _Full Ball Bearings

• 1/10 Scale
• Length: 464mm, Width: 184mm, Height: 136mm 
• Wheelbase: 257mm
• Tyre Width/Diameter (Front & Rear): 24/63mm
• Bathtub-type Frame
• Shaft Driven 4WD
• Front/Rear 4-Bevel Resin Differentials
• 3-Piece Steering Tie-Rod
• 4-Wheel Double Wishbone Suspension
• Front/Rear CVA Oil Shocks
• Gear Ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinion)
• Type 540 Sport-Tuned Motor
• Full Ball Bearings
• Electronic Speed Controller (ESC) included

• Two-channel radio, steering servo, 7.2-7.4volt battery with compatible charger, and Tamiya PS polycarbonate paint

Sock it to 'em Good!
This R/C model assembly kit recreates a rock crawling vehicle like those seen in popular U.S. events where the massive machines vie for time or crawling ability over impossible-looking obstacles. The lightweight yet tough polycarbonate racing truck body comes with a host of marking stickers for decoration. The tough CR-01 chassis is up to the rock crawling challenge, its durable ladder frames featuring aluminum side channels and resin cross members as well as a 4-link rigid suspension with oil dampers and progressive springs. The motor is placed in a central position, with planetary gears enabling low-speed shaft-driven 4WD. Front and rear differentials can be locked. Large-diameter tires feature a tread pattern which extends to the sidewalls, and are fitted to beadlock wheels.

Specifications
_Length: 435mm _Width: 265mm _Height: 215mm _Weight: 2,309g (not including R/C equipment and battery pack) _Wheelbase: 288mm _Tread (Front & Rear): 208mm _Tire Width/Diameter (Front & Rear): 57/125mm _Aluminum & Resin Ladder Frame _Shaft-Driven 4WD _Front/Rear 3-Bevel Differentials (locked as standard) _Planetary Gearbox _Front/Rear 4-Link Rigid Suspension _Front/Rear CVA Shock Units _Gear Ratio = 32.4:1 _Type 540 Motor _Requires Electronic Speed Controller (sold separately)

Separately Required Items
_2-Channel R/C Unit with ESC__Battery Pack & Charger

The 2WD buggy The Frog will be a model familiar to many who joined in the first R/C boom of the 1980s. Now, it serves as the inspiration for this new model, the Neo Fighter Buggy. At home both on- and off-road, this 2WD buggy features a lightweight yet tough monocoque frame that protects vital equipment such as the servo and battery from damage; its long form also offers great stability. Coupled with friction dampers and 4-wheel double wishbone suspension, it means the Neo Fighter Buggy performs well even on difficult off-road surfaces. Such a combination of hassle-free assembly and high-performance, light-on-its-feet handling is sure to recommend this model not only to fans of the past, but also to the next generation of R/C racers!

The DT-03 Chassis
The stylish slim-line form of this chassis stems from its lightweight yet durable monocoque frame, which features a longitudinally-positioned battery and the R/C equipment along the centreline for excellent balance. The combination of a long 287mm wheelbase and 4-wheel double wishbone suspension, married to CVA oil dampers with long arms, allows the model to handle with stability on poor surfaces. Ribbed front and square spike rear tires provide ample grip, and the rear-positioned gearbox is sealed to protect from dust and dirt, with the built-in differential gear offering smooth cornering.

• Utilises a longitudinally-placed rear motor, rear-wheel drive set-up
• Long wheelbase design enables stable performance
• The angle of the skid-shaped underside has been increased to raise the car's off-road potential
• Features a newly-designed body moulded in tough polycarbonate material
• Includes a torque-tuned 540-brushed type motor and CVA shock units
• Includes ESC (Electronic Speed Controller)
• Fully independent double wishbone suspension
• Suitable for off-road terrain

• Two-channel radio, steering servo, 7.2-7.4volt battery with compatible charger, and Tamiya PS polycarbonate paint

• Length: 376mm, Width: 182mm/190mm
• Wheelbase: 257/251mm
• Tyre Width/Diameter (Front & Rear): 24/64mm
• Bathtub-type Frame _Shaft Driven 4WD _Front/Rear 4-Bevel Resin Differentials
• 3-Piece Steering Tie-Rod
• 4-Wheel Double Wishbone Suspension
• Front/Rear CVA Oil Shocks
• Gear Ratio = 8.27:1 (10 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinion)
• Type 540 Sport-Tuned Motor
• Full Ball Bearings
• Electronic Speed Controller (ESC) is sold separately

• Length: 457mm, Width: 204mm, Height: 136mm
• Wheelbase: 251mm
• Tyre Width/Diameter: 27/67mm (Front), 32/67mm (Rear) 
• Bathtub-type Frame 
• Shaft Driven 4WD
• Front/Rear 4-Bevel Resin Differentials
• 3-Piece Steering Tie-Rod
• 4-Wheel Double Wishbone Suspension
• Front/Rear Friction Dampers
• Gear Ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately sold pinion) 
• Type 540 Motor

• Two-channel radio, steering servo, 7.2volt battery with compatible charger, and Tamiya PS polycarbonate paint

• Length: 407mm, Width: 186mm, Height: 159mm
• Wheelbase: 257mm　
• Tyre Width/Diameter (Front and Rear): 27/69mm
• Bathtub-type Frame
• Shaft Driven 4WD
• Front/Rear 4-Bevel Resin Differentials
• 3-Piece Steering Tie-Rod
• 4-Wheel Double Wishbone Suspension
• Front/Rear Friction Dampers
• Gear Ratio = 9.58:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinion)
• Type 540 Motor

• Two-channel radio, steering servo, 7.2volt battery with compatible charger, and Tamiya PS polycarbonate paint

• Length: 407mm, Width: 186mm, Height: 155mm
• Wheelbase: 257mm
• Tyre Width/Diameter: Front & Rear 27/69mm
• Monocoque Chassis Frame
• Belt-Driven 4WD
• F/R Gear Differential Units
• 3-Piece Steering Tie-Rod
• 4-Wheel Double Wishbone Suspension
• CVA Shock Units
• Gear Ratio 8.04:1 (When used with kit-standard 68T spur and 22T pinion gears)
• Full Ball Bearings
• Type 540 Motor
• Requires 2-channel radio, servo, electronic speed controller, and Tamiya PS spray paint (sold separately)

• Length: 385mm, Width: 290mm, Height: 260mm
• Weight: 1,560g (not including R/C mechanism and battery)
• Wheelbase: 207mm
• Tread: 212mm (Front), 216mm (Rear)
• F/R Tire Width/Diameter: 115/71mm
• ABS Box Type Frame
• Rear-wheel 2WD
• Suspension: Independent Swing Arm (Front), Rolling Rigid (Rear)
• F/R Friction Dampers
• 2-Piece Steering Tie-Rod
• 3-Bevel Differentials
• Gear Ratio: 14.7:1
• Type 540 Motor
• Electronic Speed Controller Included

• Specifications: Length: 434mm, Width: 188mm, Height: 150mm
• Wheelbase: 257mm
• Monocoque Chassis Frame
• Belt-Driven 4WD
• F/R Gear Differentials
• 3-Piece Steering Tie-Rod
• 4-Wheel Double Wishbone Suspension
• CVA Shock Units
• Gear Ratio＝8.04:1 (When used with kit-standard 68T spur and 22T pinion gears)
• Full Ball Bearings
• Type 540 Motor
• Requires an electronic speed controller (sold separately)
• Separately Required Items
  • 2-channel R/C system with ESC　
  • R6/AA/UM3 batteries for transmitter
  • Battery Pack & Charger

• Length: 425mm
• Height: 140mm
• Width: 225mm
• Wheelbase: 255mm
• Tread (F/R): 190mm
• Tire Width/Diameter: 23/83mm (Front), 38/88mm (Rear)
• ABS Frame Chassis
• Polycarbonate Body
• Rear Motor, Rear-Wheel Drive
• 3-Bevel Differential
• F/R Single Trailing Arm Suspension　
• F/R Aluminium Oil Dampers
• Gear Ratio＝1:7.54, 1:9.05
• Electronic Speed Control [ESC] & RS-540 Motor included.

• Equipped with metal front under guard. Knuckle mechanism is just like that on an actual truck.
• Highly-durable front & rear die-cast metal wheel hubs.
• A planetary gear ensures optimum ratios while a metal dog clutch, shift forks, and plastic gears combine to deliver smooth gear changes.
• Durable, lightweight die-cast aluminium front/rear axle housings are equipped with differentials.
• Power is delivered from the transmission to the front wheels via universal drive shaft.
• An abundance of metal parts are incorporated for a high level of realism.

• Length: 525mm, Width: 278mm, Height: 275mm, Weight: 3.2kg
• Tread: 200mm (Front), 218mm (Rear)
• Wheelbase: 287mm
• Tyre Width/Diameter (F/R): 60/123mm
• Type 540 Motor
• Longitudinally-Mounted Motor Shaft-Driven 4WD
• Front & Rear 6-Pinion Differential Gears
• Front & Rear Oil Dampers
• Gear Ratio; 1st Gear = 1_54.63 (4WD), 2nd Gear = 1_40.49 (2WD), 3rd Gear = 1_27.92 (2WD)
• Requires an Electronic Speed Controller & 4-Channel radio system (sold separately)

• Length: 390mm, Width: 235mm, Height: 150mm
• Weight: 1,330g (not including R/C unit, battery pack)
• Tread: 205mm (Front), 208mm (Rear)
• Tire Width/Diameter: 31/88mm (Front), 38/88mm (Rear)
• ABS Monocoque Chassis Frame
• Shaft-Driven 4WD
• F/R 3-Bevel Differentials
• 2-Piece Steering Tie-Rod
• 4-Wheel Double Wishbone Suspension
• Gear Ratio＝8.1:1 or 10.04:1
• GT-Tuned Motor (25T)
• ESC included

• Specifications
• Length: 430mm
• Height: 150mm
• Width: 220mm
• Weight: 1,200g (excluding R/C equipment, battery, etc.)
• Wheelbase: 255mm
• Tread (F/R): 186mm
• Tire Width/Diameter: 19/74mm (Front), 35/83mm (Rear)
• ABS Resin Bathtub Chassis
• Rear-Wheel Drive
• 3-Bevel Differential Gears
• F/R Trailing Arm Suspension
• F/R Friction Dampers
• Gear Ratio＝1：7.54 or 1:9.05
• Type 540 Motor included

• This is a 1/10 scale R/C model assembly kit. Length: 452mm, width: 188mm, height: 132mm. Wheelbase: 257mm (standard)
• The kit features existing body, updated markings, masking stickers, instruction manual and packaging
• The form of the BMW M3 GT2 2009 is captured in style
• The bathtub frame of the evolved shaft-driven 4WD TT-01 Type-E has its motor and battery close to the ground for lower centre of gravity and optimum balance
• Silver mesh type wheels are paired with racing slick tyres
• Carton quantity is 6 and EAN is 4950344584499

• What's included?
  • ESC 
  • Torque-Tuned motor
  • LEDs
• What's needed?
  • Transmitter & receiver
  • Servo
  • Battery and charger
  • Paint for the polycarbonate body
  • Tools to help with assembly of the kit

• Length: 400mm, Width: 210mm, Height: 150mmWheelbase: 250mm
• Tread: F170mm, R175mm
• Tyre Width/Diameter: F19/74mm, R35/83mm
• Chassis: 2mm Thick FRP Plate with Reinforcing Aluminium Plate
• Rear-Wheel Drive
• Weight: Approx. 1730g
• Type 540 Motor included (Compatible with kit-included motor or Item 53689 540J Motor only)
• No Differential Gears
• Front Suspension: Double Trailing Arm, Rear Suspension: Swing Axle
• 4 Oil Dampers
• Gear Ratio=6.5:1 or 9.3:1

• Two-channel radio, steering servo, 7.2volt battery & battery charger, and Tamiya TS paint

Customizable Scale Realism
The Tundra is a full-size pick-up truck made by Toyota for the North American market. In 2007, the Tundra underwent a model change, and this is a 1/10 R/C assembly kit of the double cab version of this second generation Tundra. The model features a ladder frame chassis just like the actual truck, and is also equipped with a 3-speed transmission and shaft-driven 4WD system. Many metal parts such as the ladder frame, leaf springs, and friction dampers provide a unique assembly experience while the injection-molded body shell and large diameter tires accurately reproduce the high-lift's imposing appearance. Futhermore, parts such as a roll bar, grille guard, and roof carrier with 2 snowboards are included to let you customize your ride. Add separately available LED lights for an even higher level of realism.

Specifications
_Length: 500mm, Width: 216mm, Height: 238mm, Weight: Approx. 3.1kg. _Motor: Type RS540 _Drivetrain: Shaft-driven 4WD _Diff. Gear: Front/Rear 2-bevel Diff. _Suspension: Fron/Rear Leaf Rigid _Dampers: Front/Rear Friction Dampers _Gear Ratios: 1_64.39 (Low), 1_35.20 (2nd), 1_21.14 (Top) _Speed Controller: ESC

• Headlights and turn signals can be recreated using separately available LEDs. Maker emblems are recreated with metal-transfer markings
• Metal-plated roll bar features 5 light positions, into which LEDs can be installed
• Front guard features fog lights, which can be modelled with either light covers on or off
• Newly-designed 3-piece 5-spoke wheels feature a stylish gun metal colour
• Highly accurate injection-moulded resin body features lots of metal-plated parts such as the muffler. LEDs can also be installed for realistic taillights
• Choose from 3 different kinds of markings to create your own custom surfboard
• Realistic leaf springs are made from 5 individual panels and can be easily adjusted after assembly
• Differential features tough metal diff gears and can be locked to provide awesome off-road ability
• 3-speed transmission provides excellent low speed performance and realistic gear changes. A slipper clutch protects the gears from shocks to ensure smooth operation

• Length: 508mm, Width: 216mm, Height: 270mm, Weight: Approx. 3.1kg
• Motor: Type RS540
• Drivetrain: Shaft-driven 4WD
• Diff. Gear: Front/Rear 2-bevel Diff
• Suspension: Front/Rear Leaf Rigid
• Dampers: Front/Rear Friction Dampers
• Gear Ratios: 1_64.39 (Low), 1_35.20 (2nd), 1_21.14 (Top)
• Speed Controller: ESC (Sold Separately)

• Four-channel radio (Tamiya Attack 4WD highly recommended), 7.2V battery pack and charger, Electronic Speed Controller (ESC) - sold separately

This is a re-issued R/C assembly kit of the Hot Shot. It originally debuted in 1985 as Tamiya’s first 4WD off-road buggy.

An R/C Legend Returns
With its aggressive-looking body design and low center of gravity, the Hotshot, Tamiya's first shaft-driven 4WD R/C buggy, made waves when it was introduced in 1985. The unique 3-piece chassis included such innovative features as front/rear mono-shock oil dampers, 4-wheel double wishbone suspension equipped with stabilizers, and front/rear fully-enclosed gearboxes equipped with thrust ball bearings and differential gears. A wide array of Option Parts were produced especially for modifying the Hotshot, and the machine became something that every youth at that time dreamed of. Fans have clamored for a re-release of the epoch-making R/C car, and Tamiya now brings back this legend to let fans relive their childhood memories.

An Old Dog with New Tricks
Tamiya designers have given the Hotshot a makeover, replacing older, harder to assemble parts with modern equivalents but still keeping true to the spirit of the original Hotshot. While the front/rear double wishbone suspensions and adjustable mono-shock oil dampers remain the same, the drivetrain features modern dog bone type propeller shafts for enhanced reliability. The oil dampers have also been changed to the more modern diaphragm type. Also, with the use of a modern ESC, the original Hotshot's rear aluminum heat sink was no longer necessary. However, the Hotshot would not look the same without it, so our solution was to install a dummy part to remain faithful to the original look. Take this updated Hotshot out for a spin and compare it to today's R/C buggies to experience how far this hobby has developed!

Specifications
_Length: 390mm__Width: 235mm__Height: 150mm__Weight: 1270g__Tread: (Front/Rear) 194mm__Tire Width/Diameter: (Front) 28/82mm, (Rear) 34/82mm_ _Frame: ABS Resin Monocoque__Drivetrain: Shaft-driven 4WD__Diff. Gear: 3-bevel__Steering: 2-piece Tie Rod__Suspension: 4-wheel Double Wishbone_ _ Gear Ratio: 8.1_1, 10.04_1__Motor: Type RS540__Speed Controller: ESC

• Length: 453mm, Width: 220mm, Height: 175mm, Weight: 1,840g (with Resin Body)
• Tread: 197mm (Front), 178mm (Rear) _Drivetrain: Rear Wheel Drive
• Suspension: Front double wishbone with in-board spring, Rear trailing arm with oil damper
• Tire Width/Diameter: 35/82mm (Front/Rear)
• Frame: Space Frame _Motor: RS540 Type _Gear Ratio: 6.7:1, 7.3:1, 8.5:1

This 1/10 scale all-terrain 2WD buggy R/C assembly kit features a low centre of gravity bathtub frame, oil damper-equipped 4-wheel double wishbone suspension, and full ball bearings for an exciting high-performance package. The edgy, stylish body is made from durable, lightweight polycarbonate and its yellow paint scheme provides a great match for the grey-coloured dish wheels. Grooved front tyres and rear spike tyres ensure excellent traction on any surface.

DT-02 Chassis
The DT-02 machine is a simple 2WD chassis which features a straightforward, rugged design to ensure easy assembly and superb reliability, while its 4-wheel double wishbone suspension offers agile handling. Combining exciting performance with user-friendliness, the DT-02 chassis is the perfect way for R/C novices to start enjoying the wonderful hobby of Radio Control.

• Length: 384mm, Width: 248mm, Height: 140mm
• Wheelbase: 260mm
• Weight: 1042g
• Motor: Type 540
• Gear: 3-bevel diff
• Shock Damper: oil-filled damper
• Drivetrain: Rear-Wheel Drive
• Gear Ratio: 9.28:1
• With adjustable gear ratio
• Bearings: shielded ball bearing
• Body material: clear polycarbonate
• Chassis material: plastic
• Differential type: gear
• Suspension: 4-wheel Double Wishbone
• Fully independent double wishbone suspension
• Terrain Use: off-road
• Required To Complete: 2-channel radio, steering servo, 7.2volt battery & battery charger, and Tamiya PS paint.

The Ford F-350 is one of America’s most popular pick-up trucks. Tamiya has faithfully recreated this icon as part of its most advanced and extensive lineup of electric radio control cars. Tamiya spared no expense in developing this truck to be the most realistic ever, with a ladder frame chassis and 4WD system just like the actual truck. The 3-speed transmission provides lots of enjoyable driving options and a plethora of metal parts such as the front guard, leaf springs, and aluminum friction dampers make for a very interesting assembly kit. The large diameter tires provide impressive ground clearance and enhances the realistic resin body's muscular look. Metal-plated parts for the roll bar, front grill, road lights, front/rear bumpers, and muffler provide extra detail highlights throughout the model as well.

_Length: 492mm, Width: 216mm, Height: 220mm, Weight: Approx. 3.1kg _Motor: Type RS540 _Drivetrain: Shaft-driven 4WD _Diff. Gear: Front/Rear 2-bevel Diff. _Suspension: Fron/Rear Leaf Rigid _Dampers: Front/Rear Friction Dampers _Gear Ratios: 1_64.39 (Low), 1_35.20 (2nd), 1_21.14 (Top)

• Overall length: 410mm, Width: 240mm, Height: 145mm, Wheelbase: 1,020mm
• Transmission type: rear 2WD
• Suspension: Front double wishbone. Rear trailing arm
• Tyre width/diameter: Front 21/73mm. Rear 51/88mm
• RS-540 Type motor included

• Two-channel radio, steering servo, 7.2volt battery with compatible charger, and Tamiya PS polycarbonate paint

• 1/10 Scale
• Length: 389mm, width: 223mm, height: 135mm, weight: 830g
• 380 type motor (chassis compatible with 540 type motor - sold separately)
• Transmission Type: Rear 2-Wheel Drive
• Independent swing axle front suspension, rolling rigid axle rear suspension, friction dampers
• Sealed rear gearbox to protect diff gear during off-road running
• 3-piece assembly wheel, straight ribbed racing front tyres, paddle rear tyres
• Front and rear axle compatible with ball bearings (sold separately)

• Two-channel radio, steering servo, 7.2volt battery with compatible charger, and Tamiya PS polycarbonate paint

• 1/12 Scale
• Length: 400mm, Width: 168mm, Height: 139mm
• Wheelbase: 256mm
• Weight: 1,800g
• Type 540 Motor
• Rear-Wheel Drive
• Tyre Width/Diameter: (F/R) 29/77mm
• Tread (F/R): 138mm
• Duralumin Frame Chassis
• 3-Bevel Differential
• 2-piece Steering Tie-Rod
• 4-Wheel Double Wishbone Suspension with Metal Torsion Bar Springs
• Gear Ratio = 9.3:1, 16:1, 21:1

• Two-channel radio, steering servo, 7.2-7.4volt battery with compatible charger, and Tamiya PS polycarbonate paint

The Tamiya MudMad is the second R/C model assembly kit on the super-compact and fun to drive SW-01 chassis. The body itself is inspired by off-road vehicles and was dreamt up by designer Takayaki Yamazaki who fans of Tamiya will remember from the Dual Ridge kit and other Tamiya vehicles.

SW-01: Super-Compact 4WD
190mm long and 150mm wide, the SW-01 is a compact, highly fun 4WD chassis. A Type 370 motor is central in the slim monocoque frame, with gears transmitting its output to the front and rear of the model, where 70mm tires translate it into a powerful drive. The chassis power source is mounted in the top section to allow wild wheelies under acceleration. Strut type 4-wheel independent coil sprung suspension utilizes single piece upper arms to link left and right wheel steering motion, helping suppress roll during turns, and together with front and rear differentials realize a tight turning circle.

• 1/24 scale R/C model assembly kit. Length: 190mm.
• Lightweight and durable polycarbonate body. It is magnet- secured for swift attachment and detachment, and comes pre-painted in PS-3 Light blue.
• The body leans in the direction in which the model steers, achieving remarkably tight turning circles and helping to suppress roll.
• Strut style suspension.
• A central Type 370 motor transmits power to the front and rear in a gear-driven 4WD setup.
• Can be used with standard size servos and R/C equipment despite its compact nature.
• Aftermarket battery note: Battery pack size must be under 66x36x15mm in size.
• Requires: 2-Channel Radio, standard size servo, 7.2-7.4volt battery pack & compatible charger and ESC
• Compatible with: item 51610 RC T301 Battery Case for use with 4 AA batteries if desired

• This is a 1/10 scale R/C model assembly kit. Length: 488mm, width: 205mm, height: 124mm. Wheelbase: 251mm
• The kit features an existing body and new stickers
• The distinctive form of the 1978 Ford Zakspeed Capri Turbo is captured in style by a lightweight, rigid 1.0mm thick polycarbonate body
• The efficient shaft-driven 4WD TT-02 chassis features superior adaptability and stability
• Front 2-piece mesh wheels from Item 50548 (silver colour) are paired with racing slick tyres
• Rear 2-piece wide mesh wheels from Item 50549 (silver colour) are paired with wide racing slick tyres from Item 50547
• Gold colour wheel caps are used at front and rear
• Comes with stickers and masking stickers for use in the paint job
• Carton quantity is 6 and EAN is 4950344475261

• What's included?
  • ESC 
  • Torque-Tuned motor
• What's needed?
  • Transmitter & receiver
  • Servo
  • Battery and charger
  • Paint for the polycarbonate body
  • Tools to help with assembly of the kit

• Carbon fibre battery holder (dedicated component)
• Rear stabilizer
• TRF special dampers (hard black coating)
• Double-cardan drive shafts (33mm)
• High-traction lower deck
• Reinforced C parts (uprights)
• Reinforced D parts (suspension arms)
• 3x106mm aluminium turnbuckle shafts
• Aluminium joint cups
• Clamp-type aluminium wheel hubs (5mm)
• 2.6mm diameter titanium-coated shafts
• 46mm titanium-coated shafts
• 06 module aluminium pinion gear (20T)
• Full ball bearings
• Hi-torque servo saver (black)

• Scale is 1:10
• Length: 332mm (including bumper)
• Width: 164mm
• Wheelbase: 225mm or 239mm (Selectable)
• Monocoque Frame
• Front-Midship Motor, Front-Wheel Drive
• Oil-Filled Gear Differential
• 3-Piece Steering Tie-Rod
• 4-Wheel Independent Double Wishbone Suspension
• TRF Special Dampers
• Gear Ratio = 5.78:1 using included 20T pinion gear (7.22:1 - 4.81:1 available with separately sold pinion gears)
• Requires an Electronic Speed Controller (sold separately)

• Compatible body
• 2-Channel R/C System w/ESC
• R6/AA/UM3 batteries for transmitter
• Type 540 Motor
• Battery Pack & Charger