Tamiya Electrics

• The distinctive fuselage form of the F-35C – which has larger wings and horizontal stabilizers than other F-35 variants for slower landings – is authentically captured in style. The model is assembled parked.
• Fuselage parts are newly moulded, excluding canopy and weapons bay doors parts.
• Fine recreations of Radar Absorbent Material (RAM) are moulded into fuselage surfaces.
• Choose parts to recreate:

• Leading-edge and trailing-edge control surfaces are depicted down. Parts to render wheel chocks are also included.
• Features realistic renderings of pylons (F-35C's dedicated design) under wings and lower fuselage gun pod. (The gun pod is not attached if using RCS enhancers.)
• This kit also features realistic renderings of the following sections: 

• Choose whether to assemble the model in stealth mode (no external ordnance), air-to-air mode (missiles only), or beast mode (full ordnance).
• Includes various kinds of ordnance: AIM-9X Sidewinder x2, AIM-120C AMRAAM x2, GBU-12 Paveway II x4, and GBU-31 JDAM x2.
• Masking stickers for the canopy and a realistically recreated seated pilot figure with Helmet-Mounted 
• Display (HMD) included.
• Comes with decals to depict 6 marking options (4 from United States Navy and 2 from United States Marine Corps.).

• 1/48 scale plastic model assembly kit.
• The model can be put together in one of the following three ways; Parked, Short takeoff, and
• Vertical landing.
• This kit can be assembled with one choice of three ordnance patterns – stealth mode, air-to-air mode, and beast mode.
• The lift fan depicted with ergonomic parts breakdown is integrated with nose landing gear bay. The inside fan shape is realistically rendered.
• The variable vane under lift fan can be depicted at different angles.
• Shorter fuselage weapon bays compared to the F-35A are newly moulded and have detailed depictions of cables.

• Choose parts according to the model type chosen.
• Rotary engine duct nozzle angles.
• Open or closed fuselage weapon bay doors, and half-open two inside weapon bay doors to capture vertical landing.
• Up or down leading-edge, trailing edge flaperons and horizontal stabilizers.
• Nose landing gear and main landing gear can be chosen between with or without load, according to chosen assembly type.
• Open or closed canopy.
• Extended or retracted boarding ladder.
• The engine nozzle is broken down into five separate pieces for detail.
• Martin-Baker US16E ejection seat depicted in detail.
• Includes a stand which can be used when depicting vertical landing.
• Comes with decals to depict 7 marking options from a total of three countries (United States Marine Corps, Royal Air Force, Italian Air Force / Navy).
• Includes various kinds of ordnance: AIM-9X Sidewinder x2, AIM-120C AMRAAM x2, GBU-12 Paveway II x4, and GBU-32 JDAM x2 (which can be mounted to shorter weapon bays compared to the F-35A).
• Masking stickers for the canopy and a pilot figure included.

• 1/48 scale plastic model assembly kit. Wingspan: 222mm, fuselage length: 326mm
• Realistically depicted Radar absorbent material (RAM) sections
• This kit can be-assembled with one choice of the three ordnance patterns – stealth mode, air-to-air mode, and beast mode. Ordnance parts can be-attached under wing
• Features realistic renderings of the following sections:

• Choose from open or closed weapons bay covers and canopy (the latter is interchangeable), up or down flaps, and extended or retracted boarding ladder
• Includes a realistically recreated seated pilot figure with Helmet-Mounted Display (HMD) and various kinds of ordnance: AIM-9X Sidewinder x2, AIM-120C AMRAAM x2, GBU-12 Paveway II x4, and GBU-31 JDAM x2
• Transparent parts capture sensor windows
• Comes with nine marking options - U.S. Air Force, Japan Air Self-Defense Force, Royal Norwegian Air Force, Royal Danish Air Force, Royal Australian Air Force, Israeli Air Force, Italian Air Force, Republic of Korea Air Force, and Royal Netherlands Air Force (also, drag chute fairing component is-included only for the Royal Norwegian Air Force)
• Includes canopy masking stickers and a full-colour painting guide

Our legendary 1/48 Aircraft Series welcomes the J variant of the Lockheed P-38 Lightning! Our first P-38 kit, released in late 2019, came in the form of the F/G variant, and it quickly became the definitive P-38 kit of the modeling world.

The Lockheed P-38 Lightning was an American twin engine fighter aircraft produced by Lockheed; it was the first Lockheed fighter aircraft which was officially adopted into service. The P-38’s variants were used during World War II and they reached about 10,000 production planes. Equipped with intercoolers under engines, the P-38J Lightning yielded 1,450hp at high altitude and maximum 1,600hp, plus longer-range courtesy of fuel tanks in its wingtip leading edges in addition to the main fuel tank. As a result, the P-38J offered stable and astonishing performance at any altitude, and gained great renown among American fighter aircraft.

• 1/48 scale plastic model assembly kit. Length: 240mm, width: 330mm.
• The unique form (twin-engine, twin-tailplane) with radiator fairing and larger engine cowlings of the P-38J (late P-38) is accurately captured.
• Features realistic renderings of air ducts connecting intercoolers to oil coolers.
• New-shape turbo superchargers are realistically depicted.
• The first canopy with the flat front glass and 2-part third canopy are authentically recreated.
• The second canopy can be depicted open or closed. A 1-part slide-molded piece succinctly and realistically depicts closed canopy, and the three parts including vertically openable upper hatch recreates the opened canopy.
• New parts are added to depict wingtip leading edges which have detailed refueling ports.
• The steering wheel is replaced by a gun-grip type stick.
• A detailed cockpit features separate side walls with the throttle box and radio while the Lynn-3 gunsight, radio at the back of cockpit and more are also depicted.
• Nose landing gear has updated fork and main landing gear has reinforced upper rotating struts.
• The spar part (combined with the nose landing gear bay) is inserted into wing, which ensures an accurate dihedral angle.
• Contains parts to recreate two each of 150- and 300-gallon drop tanks.
• Weights for nose and right, left engine cowlings are included in the kit to ensure correct balance of the model when displayed.
• Comes with three marking options, including the “Marge" P-38J which the US ace pilot, Richard Ira Bong flew.
• Comes with canopy masking stickers and a full-color painting guide.

This WWII fighter was a daring design with twin booms and a piston engine in each, plus a central nacelle which housed the cockpit and armament (machine guns and cannon in the nose). Introduced in June 1941, the aircraft went on to be used extensively in the Pacific through WWII. The F variant was manufactured from April 1942 onward, and featured pylons for 150-gallon drop tanks to make it capable of longer bombing missions. Later P-38Gs had more powerful engines and could carry bigger 300-gallon drop tanks. The P-38 was used for interception, dive bombing, level bombing, ground attack, night fighting, photo reconnaissance, radar and visual pathfinding for bombers and evacuation missions, and extensively as a long-range escort fighter when equipped with drop tanks under its wings.

• 1/48 scale plastic model assembly kit. Fuselage length: 240mm, wingspan: 330mm.
• P-38F and P-38G variants can be built.
• The model creates a parked aircraft when assembled and complete.
• Features accurate depictions of early P-38 features such as slimline engine cowlings, intercoolers in leading edges, plus the curved canopy front.
• Weights are included in the kit to ensure correct balance of the model when displayed.
• The canopy can be assembled open or closed. When closed, it is a 1-part slide-molded piece with dedicated F and G variant parts. The hatch is shown open sideways on the P-38F, and vertically on the P-38G.
• A detailed cockpit features the wheel-type controls, radio, throttle box and more.
• Comes with parts to recreate two each of 150- and 300-gallon drop tanks.
• Includes two marking options: “White 147” P-38G which took part in the interception of Admiral Isoroku Yamamoto in April 1943 and “White 33” P-38F
• Mirror stickers are included to recreate cockpit mirror and engine cowling interior surface sections.
• Comes with canopy masking stickers and a full-color painting guide.

• This is a 1/72 scale plastic model assembly kit. Wingspan: 182mm, fuselage length: 218mm
• The distinctive fuselage form of the F-35C – which has larger wings and horizontal stabilizers than other F-35 variants for slower aircraft carrier landings – is captured in style
• Choose one of the two assembly options: extended or folded wingtips
• There is plenty of detail showcased on the wing hinges
• Features newly moulded parts to recreate the reinforced nose landing gear with dual tires and rigid main landing gear, and tyres
• The newly moulded distinctive nose landing gear bay has realistic renderings of details such as ribs and pipes
• Fine recreations of Radar Absorbent Material (RAM) are moulded into fuselage surfaces
• Features a realistic rendering of the lower fuselage gun pod (the gun pod is not attached if using RCS enhancers)
• This kit also features realistic renderings of the following sections:

• Clear parts recreate canopy and Electro-Optical Targeting System (EOTS) fairing under the nose
• Includes parts to recreate AIM-9X Sidewinder x
• Masking stickers for the canopy and a realistically recreated seated pilot figure with Helmet-Mounted Display (HMD) included
• Comes with decals to depict 6 marking options (3 from United States Navy and 3 from United States Marine Corps)

• 1/72 scale plastic model assembly kit. Wingspan: 148mm, fuselage length: 215mm.
• The kit recreates the vertical landing and can be assembled in two ways; landed or hovering, and ensures superior assembly with dedicated angled door parts.
• The parts faithfully depict a hovering aircraft with downward engine nozzle and opened doors.
• Features realistic renderings of half-open two inner weapon bay doors and interior details such as ribs and pipes.
• The nose landing gear and main landing gear can be depicted as extended (for hovering) or retracted (for landing).
• The lift fan is integrated with the nose landing gear bay, and the variable vane underneath is recreated in detail.
• Shorter than on the F-35A, the engine nozzle is recreated by a single part.
• The 3BSM (3 Bearing Swivel Module) is faithfully recreated with a dedicated parts breakdown for this kit.
• RAM (Radar Absorbent Material) are moulded into fuselage surfaces.
• Clear parts recreate canopy and EOTS fairing under the nose.
• Includes parts for AIM-9X Sidewinder x2 and AIM-120C AMRAAM x2.
• Y-shaped air intake duct for highly advanced stealth characteristics.
• Detailed cockpit, landing gear bays and roll posts.
• Martin-Baker US16E ejection seat.
• RCS (radar cross section) enhancers affixed to top and bottom sections during basic training exercises.
• One pilot figure with the helmet mounted display (HMD).
• A stand is included to use if you are making a hovering model.
• Comes with 5 marking options from a total of three countries (United States Marine Corps, Royal Air Force, Italian Navy).
• Includes masking stickers and a painting guide.

• 1/72 scale plastic model assembly kit. Wingspan: 148mm, fuselage length: 218mm
• Features refined moulded depictions of radar absorbent material (RAM) sections on the surface
• This kit can be assembled with one choice of the three ordnance patterns – stealth mode, air-to-air mode, and beast mode
• Ordnance components can be attached to the weapons stations on the belly of the aircraft (weapons bay door can only be attached closed)
• The fuselage with integrated wing has a realistic rendering of Blended Wing Body (BWB)
• This kit also features realistic renderings of the following sections:

• Choose from open or closed canopy (not interchangeable after assembly)
• Flaps are assembled in the up position
• Canopy and EOTS sensor fairing on nose under surface are recreated in transparent plastic
• Includes a realistically recreated seated pilot figure with Helmet-Mounted Display (HMD) and ordnance components (AIM-9X Sidewinder x2 and GBU-12 Paveway II x4)
• Comes with three marking options:

• Includes masking stickers for painting demarcation of canopy and EOTS sensor fairing components, and a full-colour painting guide

• 1/10 scale R/C model assembly kit. Length: 470mm, width: 194mm. Wheelbase: 257mm.
• 1997 Mercedes-Benz CLK-GTR is recreated in lightweight and durable polycarbonate.
• Separately moulded white ABS plastic parts recreate side mirrors and rear wing.
• Silver mesh wheels are paired with racing slick tires. (The rear wheels are wide tread.)
• TC-01 chassis
• The durable and composite monocoque-frame chassis provides shaft driven 4WD from a central motor via front and rear propeller shafts, with oil filled gear differentials.
• 4-wheel independent double wishbone suspension employs A-shaped long arms, plus inboard setups front and rear with oil dampers actuated by push rods and rocker arms.
• Use spacers and shims to easily alter camber, skid, and toe angle settings.
• Both suspension arms and uprights are identical left, right, front and rear, for more efficient pit work.
• Rear transverse battery position is also compatible with 139x47x25mm square-shaped battery packs.
• Required to complete: 2-channel radio, LOW-PROFILE steering servo, (Note: Standard Size Servos cannot be used), motor, ESC, 7.2-7.4volt battery with compatible battery charger, and Tamiya PS paint.

This aluminum shift horn provides smooth, concise shift changes for your 1/14 scale R/C truck, which in turn helps lessen wear and tear on gear and clutch components.

• Aluminum Shift Servo Horn x1
• Hi-Torque Servo Saver Spring (Small) x1
• Hi-Torque Servo Saver Spring (Large) x1
• Small parts for attachment are also included.
• Compatible with 1/14 scale R/C truck models.

This set includes a brand new servo mount design. Fit the parts to your 1/14 scale R/C tractor truck model for greater rigidity and improved steering/shifting output from your servos.

• Servo Mount x2
• Aluminum Servo Horn x1
• Hi-Torque Servo Saver Spring (Large) x1
• Hi-Torque Servo Saver Spring (Small) x2
• Hi Torque Servo Saver Plastic Parts x1
• Small parts for attachment
• Compatible with Items 56301, 56304, 56308, 56309, 56311, 56314, 56316, 56340 and 56344.

This handy motor guard is compatible with Tamiya’s GF-01. G6-01 and WR-02 chassis. Employ it to protect your model’s motor from dust and debris and help it dissipate heat too.

• Aluminum Motor Guard x1
• Two included 3x28mm cap screws make for extremely secure attachment to the motor.
• A hex wrench is included to aid in attachment.
• Compatible with GF-01, G6-01 and WR-02 chassis cars.

This is and aluminum servo saver horn which is finished in blue anodized color. When used, enhanced steering handling and response can be immediately felt when replacing the Hi torque Servo Saver Q5 part.

Aluminum horn x 1
May be used with chassis kits: TB-03, TA05, DB01, DF-03, TRF501X, TRF416, TRF415
Can be used with Spare Parts 50473 and 51000

• This is a 1/35 scale plastic model assembly kit. Length: 159mm, width: 87mm
• The low-profile compact form is captured in style based on extensive research of the actual tank
• The details such as gun shield, cast surface patterns on the turret front and weld lines are faithfully depicted
• Slide moulded fenders feature realistic depictions of bolts and ease of assembly
• Fender sand shield parts are also included as option
• Assembly type tracks have one-piece straight section
• Photo-etched part depicts mesh rack for stowing tarp at rear panel
• Tow cables are also moulded as parts
• Includes parts to render turret interior features such as main gun breech and transceiver
• Two torso figures recreating commander and loader are included
• Comes with three marking options to recreate a 1st Armoured Division in Italy and two vehicles in Germany in 1945
• Carton quantity is 24 and EAN is 4950344353910

• This is a 1/35 scale plastic model assembly kit. Length: 138mm, width: 56mm
• The compact, rounded form of the French light tank H39 is faithfully captured in style based on extensive research of the actual tank
• The complex turret is realistically depicted, and features ease of assembly facilitated by slide moulding
• Assembly type tracks have one-piece straight sections and realistic upper “sag”
• Features a realistic depiction of the trench tail used to overcome trenches
• Includes variant-specific cupola, visors, engine grille, idler wheels, suspension bogies and antenna base. Choose between French or German Army specification
• Includes 1 full figure (standing French tank crew) and 1 torso (German tank crew scanning ahead from cupola)
• Metal chains are also included for the recreation of French Army tank
• Comes with a choice of two marking options to recreate a French Army tank in 1940 and a German Army tank in 1945. A full-colour painting guide is useful for camouflage painting

• 1/35 scale plastic model kit. Length: 114mm, width: 55mm
• The 37mm gun offers elevation and (as on the actual R35) 5 degrees of traverse to either side
• Assembly type tracks allow fuss-free depiction of upper run ‘sag.’ They feature one-piece straight sections
• Comes with two marking options, and a figure perched on the hatch in the turret rear
• Colour painting guide included which aids with recreation of the intricate French camouflage pattern

• 1/35 scale plastic model assembly kit. Length: 143mm
• Includes new parts recreating stowed MG34 machine gun and ammo case, flare case, communications equipment, first aid box and more
• Features assembly-type tracks allowing depiction of sag
• Open-top fighting compartment allows inspection of interior details
• 10.5cm howitzer offers traverse and elevation/depression
• Comes with 4 figures in action pose – gunner, 2 loaders and commander
• 2 marking options recreate Wespe vehicles deployed in the Battle of Anzio, the Allies’ amphibious assault that led to the eventual taking of Rome
• Marking Option 1: 26th Panzer Division; Marking Option 2: 29th Panzer-Grenadier Division

• This is a 1/35 scale plastic model assembly kit. Length: 305mm, width: 91mm
• In-depth study of the real thing has ensured a highly accurate depiction of the M40 form
• Depictions of equilibrators feature poly caps and facilitate elevation of the 155mm gun. Traverse is also provided
• The rear spade is also a moving part, and the rear gate can be assembled up or down
• Clear parts recreate light lenses and sights on twin commander and radio operator cupolas
• T80 tracks are faithfully rendered by belt-type parts
• Photo-etched engine grille parts give a crisp finish
• A multitude of accessories includes depictions of projectiles, rack and cases
• Comes with no less than 8 figures, plus 2 Korean War marking options

This is an assembly model of a modern day 4x4 light armored vehicle in Tamiya’s ever growing 1/48 scale series.

Manufactured for the JGSDF by Japanese firm Komatsu, the vehicle was first delivered to units from 2002 and provided an instant defensive upgrade from the armored vehicles it replaced. The ability to transport it by helicopter or aircraft enhances the JGSDF's mobility. Aside from the 5.56mm machine gun, it can also be fitted with a 12.7mm machine gun, or even anti-tank weapons. One of the more notable deployments of the vehicle was in the JGSDF's Iraq Humanitarian Assistance operation after the second Gulf War, and this model recreates the version updated based upon experience the JGSDF gained there. This assembly model kit is perfect for display with the 1/48 JGSDF Type 10 model kit (Item 32588)!