Schumacher

M3 (3mm across the width of the thread. Typically most 1/10 RC Cars use M3)

M3 (3mm across the width of the thread. Typically most 1/10 RC Cars use M3)

2015 IFMAR Worlds and EOS control tyre the Low Profile Cut Stagger should be used when less bite is needed than a Mini Spike and more bite is needed than a Stagger Rib.

It also gives slightly more initial turn in than the Std Slim Cut Stagger, which has a higher profile.

Available in the great popular Schumacher compounds, Yellow, Green, Silver and Blue .

It is recommended not to use an insert with this tyre.

A specialist carpet tyre, especially designed for the front of 4WD buggies to give great traction yet not be too aggressive on high grip surfaces.

The tyre will be the new 4WD front tyre for the famous 2018-19 EOS (Euro Off Road Series) and has been made to exacting requirements for championships such as these.

Designed and tested by our expert design team and the highest level drivers.

Available in Yellow, Blue and Silver compounds.

Suitable for Carpet and Astro tracks.

Low profile, less traction roll on high grip tracks and improved bump handling.

Mini Dart, midway between mini pin and mini spike making it extremely versatile for carpet and astro.

Long life and an ideal tyre for control tyre racing.

Rear, 4WD and slim 2WD front tyres available.

BRCA legal width with less side overhang.

Available in Yellow for carpet and dry astro, Silver for wet astro and Blue for super long life.

T Connector; Black Sockets - pk4

In addition to the already available Pink, Green, bright Orange, White, Yellow and Black are these Purple and Blue wheel options.

Available in our most popular sizes, 2WD/4WD rear, 2WD slim, 2WD medium and 4WD front all in standard 12mm hex fitting.

In addition to the already available Pink, Green, bright Orange, White, Yellow and Black are these Purple and Blue wheel options.

Available in our most popular sizes, 2WD/4WD rear, 2WD slim, 2WD medium and 4WD front all in standard 12mm hex fitting.

In addition to the already available Pink, Green, bright Orange, White, Yellow and Black are these Purple and Blue wheel options.

Available in our most popular sizes, 2WD/4WD rear, 2WD slim, 2WD medium and 4WD front all in standard 12mm hex fitting.

Standard length Kingpins to fit Kamtec cars

Bangers , Hot Rod , Mini Racer , Hot Hatch , F2 , 1300 Stock Cars , 2 Litre Saloons etc

Will not fit a Ministock or a car with no front suspension .

E Clips not supplied 

Hardened version available

Experience close, exciting, and fun racing with the awesome new ATOM 3 GT12. GT12 is the perfect racing class for small indoor carpet tracks, and the ATOM 3 is the class leader. It is developed from the British and European championship winning ATOM 2 and includes many new features to make the car easier to drive, easier to maintain, and even faster.

Clear body - will require assembly, cutting and paint.

The New Era of RC Racing – Hypercar Class

The first thing that comes to your mind? BWOAH!

ZooRacing is known for creating extraordinary things. BWOAH is meant to fit into this realm as well. The transition between GT and LMH bodies is smooth – BWOAH captures that perfectly. The wheel arches offer enough space to also fit the GT tires with a large diameter. The super slim cabin plays into the overall wide and flat look of the body. You’ll find two cutting lines for the rear wing – a 10mm high version that’ll apply to the USGT regulations as well as a higher “Outlaw” option for maximum downforce. To have the best results even with the lower wing, you can cut the wing longer in the front and place it more backwards on the body – that way you’ll always have the perfect size! The whole design of BWOAH uses the lowest possible center of gravity and generates maximum corner speed with that, especially on tracks with lot of grip. The GT classes with less strong motors have been put into consideration as well. The whole air resistance is as low as possible, to create a high topspeed on the straightaway. The clearance makes allowances for the widespread Tamiya TT-01 and TT-02 models. The design has been adjusted for those, so BWOAH even fits with the high shock towers. With the especially low models such as Tamiya TC-01 or an Awesomatix, the design uses all its advantages. For a stable and safe use on the track the body already offers many anti-tuck features: the structures side parts as well as the rigid ribs on the rear offer high stability when the car behind comes to close. The BWOAH 190mm body shell comes moulded from high-quality 0.7mm polycarbonate for a low weight of only 75g. The body package is rounded out by high-quality wing mounting hardware and a highly detailed sticker sheet including grill, head and tail lights. 

Features: – 

• CAD designed – Specialised GT LMH body shell with balanced front-to-rear downforce  
• Structured rear end for anti-tuck capabilities  
• Large wheel arches ensure the tyres will not rub in whatever position  
• Anti-tuck capabilities with structured side skirts 
• 0.7mm standard body weighs in at about 75g cut including wing  
• Detailed decal sheet – Wing mounting hardware  
• Designed to meet all GT/USGT class rules

Body Only - No car is included

Fully refurbished Hybrid with all new parts (99% new - used battery tray) (Schumacher Supastox MK1 with Kamtec Mini Pro rear end) 

Chassis Adapted to take 1S Lipo Batterie

- fully rebuilt with new balls etc alloy rear diff  

- New parts fitted throughout. Complete strip and rebuilt with test including a brand new chassis plate. 
- Lipo nest installed

- New Contact 45shore front there’s and 35shore rear. 

• Needs to complete 
• 2ch radio & receiver
• 1/12 Servo
• 200-205 wheelbase body 1/12th (GT12 Alex bodies best suit)
• 1S lipo and charger
• 1S ESC and motor 
• New diff kit

Built to be classed to race in the GT12 touring on 13.5T motor. But can be converted to others, such as the 25.5T brushless stock setup or even core 21 brushed. Chassis can take brushed or brushless motors. 

Kit carbon chassis for the Mi8, recommended for all tarmac racing and low grip carpet.

SupaStox GT12 pan car body, AM Type with wing, window masks and wing mounting hardware.

Body is supplied in Clear Lexan Polycarbonate plastic and is not painted or cut out.

(200mm wheelbase / 160mm wide)

The cut stagger is a slim 2WD tyre which sits in between the Stagger and Mini Spike in terms of grip levels. Less aggressive than Mini Spike but more aggressive that Stagger.

Under most circumstances this tyre is used without an insert.

SCHUMACHER - U8718

M3 (3mm across the width of the thread. Typically most 1/10 RC Cars use M3)