RC Bodies

FTX - EVO30 (BMW E3) FRONT & REAR BODY ACCESSORIES FTX - FTX10579 (To fit FTX1057BK & R Pre painted Bodies)

RC BODY POST HOLE REAMER WITH PROTECTION CAP FOR POLYCARBONATE RC BODY SHELLS

CORE RC Stepped reamer.

Cool blue anodising with knurling for easy grip.

Fixed stepped increments for holes of 2, 4, 6, 8 and 12mm diameter.

This is a clear polycarbonate body parts set of the in 210mm to 225mm Wheelbase for 1/10 MTC / M-Chassis Kits

Key Features:

• Perfect Fit: Designed for a 210 to 225mm wheelbase and 165-170mm width for optimal performance and style.
• Durable Clear Lexan Construction: Lightweight yet sturdy, ensuring longevity and resilience on the track.
• Customizable: Comes with stickers (not all as shown)

Which Tamiya Chassis? (Will fit other MTC Makes)

• MB-01 (Modern/Current): This versatile, modern chassis allows for front (FWD) or rear (RWD) motor layouts, and specifically supports a 210mm wheelbase by adjusting its modular frame.
• M-08 Concept (Current RWD): A high-performance rear-midship chassis specifically designed to be assembled in S (210mm), M (225mm), or L (239mm) wheelbases.
• M-07 Concept (Current FWD): Primarily designed for 225mm/239mm, but some iterations and setups can accommodate it; however, the M-08 is generally favored for 210mm.
• MF-01X (4WD): This 4WD shaft-driven chassis can be assembled in 210mm (S), 225mm (M), or 239mm (L) configurations by adding or removing spacer parts.
• M-05 / M-05 Ver.II (Classic FWD): The standard FWD chassis for many years. It supports 210mm, 225mm, and 239mm configurations.
• M-06 (Classic RWD): Designed for rear-motor, rear-drive, it supports 210mm (S), 225mm (M), and 239mm (L).
• M-03 (Vintage FWD): The classic, older FWD M-Chassis often used in 210mm Mini Cooper kits.
• M-02 (Vintage RWD): Older rear-drive chassis.
• M-01 (Vintage 4WD/FWD): Original Mini Cooper chassis.
• XM-01 Pro (Rally 4WD): The modern 4WD rally chassis which supports three types of wheelbase.
• also Fits Carten And Louise MTX Range

Comes with window masks & stickers

Four Steps to On-Road Ready

1. Clean Body and apply included window mask
2. Paint then peel the over-spray film off
3. Sticker your body (decal sheet included)
4. Mount your new body onto your Car

BattCave JOK3R Mini Rear Bodypost Mount, JKR-321

Printed with our proprietary methods and our select filaments.

🦇 Sold Individually. 

🦇 3d printed in the BattCave. 

New Phat Bodies Mugen CRX bodyshell.

Race inspired designed bodyshell for the popular Mardave and Kamtec 1/12th Mini stock class.

160mm wide and 175mm wheelbase

Moulded in 0.7mm race weight Lexan polycarbonate for superior quality and durability.

Comes complete with pre cut vinyl window masks and light/grill stickers sheet external overspray film and ‘Phat Bodies’ stickers.

Bodyshell comes CLEAR, so will require cutting, trimming and painting to fit.
The bodyshell in the photo’s has been painted to represent the finished item.

From Mon-Tech Racing their RS Sport-M, a body for the M-Chassis category. This body can be mounted on all M-Chassis models, it is made from 0.75mm high quality polycarbonate. The kit includes the fixing screws of the rear wing, the window masks, the headlight decals and the graphics as seen on the body.
Supplied clear.

Items needed to complete
Paint
Window Masking
Hobby Knife or Scissors for trimming
Stickers

Items shown in diagram are for example of area intended for fitment only. Only the parts in the main photo are included.

Items shown in diagram are for example of area intended for fitment only. Only the parts in the main photo are included.

Body clips; how fiddly can they be!? Try these pull tab quick release clips for easy access to under your shell.

Make removing your body clips super easy with these great rubber body clip pulls.

• Easy remove of the body clips
• Material: rubber
• Length: 18 mm
• Weight: 1,2g
• Contains: 6 pcs.

Body Replica: ABS bodyshell

This shell is designed to fit any 1/12th Standard RC Car.

The shell comes in clear ABS and is ready paint and cut out.

The dimensions of the shell are:

Length: 330mm approx

Width: 160mm approx

Height: 130mm approx

Wheelbase: 205mm

NO HARDWARE INCLUDED - As these are custom made bodies, they may have tiny imperfections due to the moulding process, but is perfectly normal.

BRCA Legal 

(Masking should be included - However no stickers will be included - No stickers for lights, grills etc - most builders mask off the lights and grills and paint instead.

Body Replica: Lexan bodyshell - Designed around the a Nascar 

This shell is designed to fit any our NEW 1/12 SUPASTOX Chassis

The shell comes in clear Lexan plastic and is ready paint and cut out.

The dimensions of the shell are:

Length: 350mm approx

Width: 164mm approx

Height: 85mm approx

Wheelbase: 205mm and will fit 201mm MTC (M-Chassiss

NO HARDWARE INCLUDED - As these are custom made bodies, they may have tiny imperfections due to the moulding process, but is perfectly normal.

(Masking is included - However no stickers will be included - No stickers for lights, grills etc - most builders mask off the lights and grills and paint instead)

All body detailing will be down to the painter - or ask Frosty Models to print you some stickers inhouse at additional costs.

Body Replica: Lexan bodyshell

This shell is designed to fit any 1/12th Standard RC Car.

The shell comes in clear Lexan plastic and is ready paint and cut out.

The dimensions of the shell are:

Length: 350mm approx

Width: 160mm approx

Height: 85mm approx

Wheelbase: 205mm

Lexan Spoiler Included - NO HARDWARE INCLUDED - As these are custom made bodies, they may have tiny imperfections due to the moulding process, but is perfectly normal.

BRCA Legal 

(Masking should be included - However no stickers will be included - No stickers for lights, grills etc - most builders mask off the lights and grills and paint instead.

We are pleased to introduce the all new Vibe TC.

CHASSIS KIT ONLY - NO BODY OR ELECTRICS ETC

The Vibe TC is a competitive 1/10th scale 4WD touring racing chassis aimed at the club racer. It’s modern design includes all the features and set up adjustments of high end racers, in an affordable package.

The Vibe TC is durable and simple to maintain. Alloy shocks with purple anodised adjusters, UJ driveshaft’s, purple alloy transmission and layshaft mounts feature as standard equipment in the kit. Strong and flexible S2 chassis and top deck makes the Vibe TC easy to drive, and tuneable for whatever track you decide to race on. 

Schumacher’s world championship winning engineering team have applied their knowledge and experience to create the NEON MTC Mini Touring Car. The NEON is already a proven winner at British BRCA National races. It features class leading suspension geometry, and transmission efficiency, to make a well balanced car that is easy to drive fast. The NEON will bring out the best in your driving skills, to move you up the rankings in this fun and competitive racing class.

BODY NOT INCLUDED! (not carbon fibre version) 

• New – Double wishbone suspension design. Refined over countless hours by our team drivers and in-house development engineers to provide maximum performance across all track conditions.
• New – Upper and Lower wishbones. Lightweight and stiff.
• New – Fixed length upper wishbones. Pre-defined camber and castor for less maintenance and performance straight from the box.
• New – Lightweight front spool assembly with replaceable lightweight outputs.
• New – Proven gear differential with steel outputs. Reliability assured.
• New – Moulded transmission housing. Lightweight and robust.
• New – Double Joint Front Driveshaft. Utilising our proven joint design for great durability.
• New – Rear Driveshaft. Ultra hard wearing Steel.
• New – Short shocks. Featuring Alloy bodies, machined pistons, low friction shafts, and lightweight moulded upper socket.
• New – Steering Arms for optimal Ackermann setting.
• New – Layshaft assembly. Lightweight and durable.
• New – Lightweight motor mount design with optional top deck stiffener screw.
• New – Lightweight moulded wheel hexes.
• New – Floating Servo Mount. Low centre of gravity design that does not impact on chassis flex.
• New – Lower shock mount. Simple and lightweight.
• New – Twist free front and rear shock mount designs.
• New – Diff/Spool eccentrics for easy belt tension adjustment, with the ability to change the diff/spool height.
• New – Vertical or rear facing body posts to suit user preference for bodyshell mounting.
• New – Adjustable battery mounting in front-rear and left-right directions. Balance the car to suit any condition.
• New – High quality Bando 105T belts. Flexible, efficient and durable drivetrain.
• Hub carrier design provides precise wheel control and performance.
• Optional Anti-roll bars.
• Rear track rods for infinite adjustment of rear toe-in. This can be tuned for the use of passive rear steering / toe-in change.
• Arrowmax 48dp 81T Spur Gear included in the kit.
• Fully ball-raced transmission.

RC BODY POST HOLE REAMER WITH PROTECTION CAP FOR POLYCARBONATE RC BODY SHELLS

A must needed tool!

CORE RC Stepped reamer.

Cool blue anodising with knurling for easy grip.

NOTICE! BODY ONLY WITH STICKERS. CAR IS NOT INCLUDED. PAINT IS SOLD SEPERATELY. PLEASE USE POLYCARBONATE SPRAYS. 

Phat Bodies '300R' Lotus Elise replica bodyshell for the MTC Mini touring car class and Tamiya M chassis.

Also fits most 1/12th MTC and LMP chassis

Race tuned aerodynamics with a extended front splitter and large high downforce rear wing help keep this body planted on the track. With high clearance speed bumps on the bonnet help the sleek body sit lower on any chassis.

Pictured on a Xpress XM1S chassis

available in 210mm wheelbase only

Made from super high quality 0.75mm Lexan polycarbonate

Bodyshell comes CLEAR, so will require cutting, trimming and painting to fit.
The bodyshell in the photo's has been painted to represent the finished item.

Comes with -
Crystal clear 0.75mm lexan polycarbonate bodyshell
High downforce race tuned rear wing
"Phat" stickers
Window and light masks
Over spray film

Note - bodyshell comes clear, painted example is for advertising purposes only

GT12 Atom pan car body Type F. This beautiful body is supplied clear with overspray film. Includes window masks, wing and wing mounting hardware.

(201mm wheelbase / 164mm wide)

BRCA GT12 Approved body.

Pre-painted bodyshell for the FTX Bugsta buggy.

The new EVO2 bodyshell was developed with the aim of improving the performance of current TC cars. Nowadays TC bodyshells have reached an extreme levels of development and detail and we, at Mon-tech Racing, beside focussing on pure performance, have put a lot of the emphasis on driveability.

The EVO2 is fast in both Modified and Stock classes providing great traction and smooth but effective steering into corners.

The kit comes supplied clear with decals, window masks and screws for the rear wing.

Standard weight.

BRCA Legal.
ETS Legal for Pro Stock and Modified classes.

This is a clear polycarbonate body parts set of the in 210mm to 225mm Wheelbase for 1/10 MTC / M-Chassis Kits

Key Features:

• Perfect Fit: Designed for a 210 to 225mm wheelbase and 165-170mm width for optimal performance and style.
• Durable Clear Lexan Construction: Lightweight yet sturdy, ensuring longevity and resilience on the track.
• Customizable: Comes with stickers (not all as shown)

Which Tamiya Chassis? (Will fit other MTC Makes)

• MB-01 (Modern/Current): This versatile, modern chassis allows for front (FWD) or rear (RWD) motor layouts, and specifically supports a 210mm wheelbase by adjusting its modular frame.
• M-08 Concept (Current RWD): A high-performance rear-midship chassis specifically designed to be assembled in S (210mm), M (225mm), or L (239mm) wheelbases.
• M-07 Concept (Current FWD): Primarily designed for 225mm/239mm, but some iterations and setups can accommodate it; however, the M-08 is generally favored for 210mm.
• MF-01X (4WD): This 4WD shaft-driven chassis can be assembled in 210mm (S), 225mm (M), or 239mm (L) configurations by adding or removing spacer parts.
• M-05 / M-05 Ver.II (Classic FWD): The standard FWD chassis for many years. It supports 210mm, 225mm, and 239mm configurations.
• M-06 (Classic RWD): Designed for rear-motor, rear-drive, it supports 210mm (S), 225mm (M), and 239mm (L).
• M-03 (Vintage FWD): The classic, older FWD M-Chassis often used in 210mm Mini Cooper kits.
• M-02 (Vintage RWD): Older rear-drive chassis.
• M-01 (Vintage 4WD/FWD): Original Mini Cooper chassis.
• XM-01 Pro (Rally 4WD): The modern 4WD rally chassis which supports three types of wheelbase.
• also Fits Carten And Louise MTX Range

Comes with window masks & stickers

Four Steps to On-Road Ready

1. Clean Body and apply included window mask
2. Paint then peel the over-spray film off
3. Sticker your body (decal sheet included)
4. Mount your new body onto your Car