RC Bodies

From LENS Bodies the Ghibli 3 for 1/10th Touring.

The latest development from LENS, used with great effect at the recent 2026 ETS in Austria with 6 drivers in the Modified A Main using the body.

Supplied clear.

BRCA and EFRA Homologated.

Available on standard weight, lightweight and ultra lightweight.

Supplied clear and uncut - only lights and grill stickers included

PIN 1/8TH

Body Replica: Lexan bodyshell - Designed around the a Nascar 

This shell is designed to fit any our NEW 1/12 SUPASTOX Chassis

The shell comes in clear Lexan plastic and is ready paint and cut out.

The dimensions of the shell are:

Length: 350mm approx

Width: 164mm approx

Height: 85mm approx

Wheelbase: 205mm and will fit 201mm MTC (M-Chassiss

NO HARDWARE INCLUDED - As these are custom made bodies, they may have tiny imperfections due to the moulding process, but is perfectly normal.

(Masking is included - However no stickers will be included - No stickers for lights, grills etc - most builders mask off the lights and grills and paint instead)

All body detailing will be down to the painter - or ask Frosty Models to print you some stickers inhouse at additional costs.

Body Replica: Lexan bodyshell

This shell is designed to fit any 1/12th Standard RC Car.

The shell comes in clear Lexan plastic and is ready paint and cut out.

The dimensions of the shell are:

Length: 350mm approx

Width: 160mm approx

Height: 85mm approx

Wheelbase: 205mm

Lexan Spoiler Included - NO HARDWARE INCLUDED - As these are custom made bodies, they may have tiny imperfections due to the moulding process, but is perfectly normal.

BRCA Legal 

(Masking should be included - However no stickers will be included - No stickers for lights, grills etc - most builders mask off the lights and grills and paint instead.

New for 2019 the Montech Truck body for 190mm touring cars.

The body utilises only three parts – the base, cabin and rear wing, making it both lightweight and durable and it incorporates details such as a mock-up engine and the ability to fine-tune the wing setting for low and high downforce.

The shape ensures it can be mounted on all kinds of touring car chassis without having to cut the front bumper and it is made of high-quality 0.75mm polycarbonate.

Included with the body set are window masks, a decal sheet and the needed assembly hardware.

Supplied clear.

Truck body to fit 190mm Touring and Rally cars. Supplied clear with window masks and overspray film. (SCALED TO A 1/14 TRUCK LIKE THE TT01E) (FITS ALL 1/10 CAR CHASSIS'S)

ASSEMBLY AND PAINTING REQUIRED - SEE OUR OTHER ITEMS FOR CURVED SCISSORS AND POLYCABONATE SPRAY PAINTS.

(PICTURE IS FOR ILLUSTRATION ONLY FROM THE SUPPLIER - ONLY FEATURES SUCH AS GRILLS AND LIGHTS ARE SUPPLIED AS STICKERS)

The Xtreme Twister follows the trend of high downforce touring car bodies.

It is used by some of the worlds top drivers including recent signing Bruno Coelho and Marc Rheinard.

BRCA Legal.

Supplied clear with overspray film, window masks, decals and wing mounting hardware.

0.7mm version for ETS 85g body rules.

BD-GT-190AS1 Bittydesign ARES-1 1/10 GT Clear 190mm Body

ARES-1 is pure performance for the 1/10 GT class. Designed with the desire to create an unconventional body thanks to highly refined and extreme aerodynamic; ARES-1 moves the performance bar to a new level.

QUALITY without any compromise is the basis of everything we make, the ARES-1 body shell represents the perfect implementation of our philosophy that drives us to do better and that encourages us to make use of our know-how acquired in over 17 years of experience.

To achieve maximum performance, we tested the body several times and made radical changes to the original design, we wanted to make sure we could offer an absolute performance product that would become the new benchmark for the GT category.

The aerodynamics of the ARES-1 will surprise you because during development we put all our experience into it and optimised every detail with the focus on maximum performance. The ease with which this body will allow you to 'push' your limits will leave you speechless every time you use it on your model.

Features:

The body shell is UNIVERSAL and mounts on all 1/10 190mm models, the wing complies with the measures as per USGT regulation and can therefore be used at any race.

• Made with high quality and genuine polycarbonate Lexan®
• Included in the kit a complete set of screw, nuts and large plastic washers to fix properly the rear wing
• Produced only in Light Weight version
• Fit all the 190mm electric chassis on the market with 257-260mm wheelbase
• Sold clear with protective film outside
• Included in the package a decal sheet pre-cut and windows mask

The bodyshell is supplied clear as part of a molding and will require cutting and painting in order to complete.

190mm Wide / 256mm Standard 1/10 Car Wheelbase body for such as a Tamiya TT02.

Supplied unpainted - and may not match design, stickers might be limited to Lights & Grills. 

THIS IS THE LIGHTWEIGHT VERSION

BD-TC-190HYP Bittydesign HYPER HR 190mm Clear TC bodyshell - Light

HYPER-HR, a new contenderbody shell contender for the 1/10 190mm electric class

This project was born from the desire to further develop the first HYPER version by creating a new model similar in appearance but in fact totally redesigned to meet the needs of this ultra-competitive category.

The HYPER-HR body represents the best result of performance and aesthetics into the same product, a great mix with modern and aggressive look.

Premium Quality first of all

Our philosophy leads us not to settle for mediocrity or speculation, for each project we always pursue the same common thread: the best or nothing. To obtain products that fully meet our expectations, we dedicate months of virtual design and rendering in order to allow us to evaluate any improvements or details to be corrected.

QUALITY without any compromise is the basis of everything we make, the HYPER-HR body shell represents the perfect implementation of our philosophy that drives us to do better and that encourages us to make use of our know-how acquired in over 15 years of experience.

Bittydesign Engineering is synonymous with guarantee, authenticity and innovation.

Product Features

The body shell complies with all EFRA, IFMAR, ROAR, BRCA and FEMCA homologation specs, so it can be used in any National and International race.

• Made with high quality and genuine polycarbonate Lexan®
• Included in the kit a complete set of screw, nuts and large plastic washers to fix properly the rear wing
• Produced in Light Weight version as well also Ultra Lite (ULT)
• Fit all the 190mm electric chassis on the market with 257-260mm wheelbase
• Sold clear with protective film outside
• Included in the package a decal sheet pre-cut and windows mask

Made with one target: the excellence

The design, inspired by a real car and adapted to the measurements necessary for homologation took several months to optimize every single detail, the search of perfection has been obsessive in order to propose a body shell that could best enhance the aerodynamic study that the project involved.

HYPER-HR is a touring body with a modern look and that responds to market demand, in the course of several months of tests on the track, changes were made several times to the original project as we wanted to be sure to offer a product that could excel in the 190mm category, step by step we have reached an optimal level of performance and balance.

HYPER-HR redefines the concept of QUALITY.

You will be surprised by the precision and details of the body. HYPER-HR is made to amaze you.
HYPER-HR redefines the concept of QUALITY.
You will be surprised by the precision and details of the body. HYPER-HR is made to amaze you.
HYPER-HR redefines the concept of QUALITY.
 You will be surprised by the precision and details of the body. HYPER-HR is made to amaze you.
 3D Cad design & engineering

In order to respect our quality standards, we have not set any limits and we have realized the HYPER-HR project with the use of the most advanced graphics and Cad design; this process guarantees a perfect execution of the forms and details that high-tech machinery realize with 5-axis CNC milling machines.

The product we deliver in the hands of the enthusiast represents the best available on the market today, we exploit and make full use of the most advanced technology to guarantee a result that represents at best the Italian excellence.

190mm Wide / 256mm Standard 1/10 Car Wheelbase body for such as a Tamiya TT02.

Supplied unpainted - and may not match design, stickers might be limited to Lights & Grills. 

Bittydesign CA45 1/10 FWD 190mm Clear Bodyshell

BD-FWD-CA45 Bittydesign CA45 1/10 FWD 190mm Clear Bodyshell

CA45, a new contender for the 1/10 190mm FWD class!

This project was born from the desire to create a new body that could gather the experience accumulated with our previous FWD bodies but with different aerodynamic solutions in order to obtain the maximum possible performance for this category.

The CA45 body represents the best result of performance and aesthetics into the same product, a great mix with modern and aggressive look.

Premium Quality first of all
Our philosophy leads us not to settle for mediocrity or speculation, for each project we always pursue the same common thread: the best or nothing. To obtain products that fully meet our expectations, we dedicate months of virtual design and rendering in order to allow us to evaluate any improvements or details to be corrected.

QUALITY without any compromise is the basis of everything we make, the CA45 body shell represents the perfect implementation of our philosophy that drives us to do better and that encourages us to make use of our know-how acquired in over 15 years of experience.

Bittydesign Engineering is synonymous with guarantee, authenticity and innovation.

Features:
The body shell is UNIVERSAL and mounts on all 1/10 190mm models, both those specially developed by the manufacturers for the front-wheel drive (FWD) category and also those with traditional 4WD chassis (touring).

Made with high quality and genuine polycarbonate Lexan®
Included in the kit a complete set of screw, nuts and large plastic washers to fix properly the rear wing
Produced only in Light Weight version
Fit all the 190mm electric chassis on the market with 257-260mm wheelbase
Sold clear with protective film outside
Included in the package a decal sheet pre-cut and windows mask

Designed for maximum performance
The shapes inspired by a real car have been adapted to the proportions and measurements necessary for use with the 190mm electric models; the design phase took several months, the attention to details was obsessive in order to propose a body shell that could optimize aerodynamics while remaining faithful to the original shapes.

If the main intent was that of performance alone at the expense of aesthetics, the finished project resulted in a body with a breathtaking look, with TCR-style widened wheel arches and a harmony of shapes and proportions that make the CA45 both beautiful for pleasure of the eye is remarkably fast.

Standard 190mm wide body by 256mm wheelbase - will fit all 1:10 electric touring cars, such as a Tamiya TT02. 

wing and stickers included. 

Kyosho Toyota Tacoma TRD Pro 2021 KB010 Electric Lime Body Shell Set

In the latest addition to their extensive offering of Le Mans Hypercar bodies for 1:12, Mon-tech Racing has released their A-424. The body shell, which echoes the lines of the LMH sportscar from the French Alpine brand, is designed for true RC racing enthusiasts. Engineered to fit all 1:12 Pan Car chassis, every aerodynamic feature from the air intakes to the rear wing profile has been carefully developed to strike the perfect balance between visual appeal and on-track performance.

The kit includes headlight and grille decals, window masks for painting, and screws for rear wing mounting.

Supplied Clear. Will require paint and cutting. 

This is a clear polycarbonate body parts set of the in 210mm Wheelbase for 1/10 MTC / M-Chassis Kits

Key Features:

• Perfect Fit: Designed for a 210mm wheelbase and 165-170mm width for optimal performance and style.
• Durable Clear Lexan Construction: Lightweight yet sturdy, ensuring longevity and resilience on the track.
• Customizable: Comes with stickers (not all as shown)

Which Tamiya Chassis? (Will fit other MTC Makes)

• MB-01 (Modern/Current): This versatile, modern chassis allows for front (FWD) or rear (RWD) motor layouts, and specifically supports a 210mm wheelbase by adjusting its modular frame.
• M-08 Concept (Current RWD): A high-performance rear-midship chassis specifically designed to be assembled in S (210mm), M (225mm), or L (239mm) wheelbases.
• M-07 Concept (Current FWD): Primarily designed for 225mm/239mm, but some iterations and setups can accommodate it; however, the M-08 is generally favored for 210mm.
• MF-01X (4WD): This 4WD shaft-driven chassis can be assembled in 210mm (S), 225mm (M), or 239mm (L) configurations by adding or removing spacer parts.
• M-05 / M-05 Ver.II (Classic FWD): The standard FWD chassis for many years. It supports 210mm, 225mm, and 239mm configurations.
• M-06 (Classic RWD): Designed for rear-motor, rear-drive, it supports 210mm (S), 225mm (M), and 239mm (L).
• M-03 (Vintage FWD): The classic, older FWD M-Chassis often used in 210mm Mini Cooper kits.
• M-02 (Vintage RWD): Older rear-drive chassis.
• M-01 (Vintage 4WD/FWD): Original Mini Cooper chassis.
• XM-01 Pro (Rally 4WD): The modern 4WD rally chassis which supports three types of wheelbase.
• also Fits Carten And Louise MTX Range

Comes with window masks & stickers

Four Steps to On-Road Ready

1. Clean Body and apply included window mask
2. Paint then peel the over-spray film off
3. Sticker your body (decal sheet included)
4. Mount your new body onto your Car

PuppyPaint Liquid Mask is the professional solution for painting RC polycarbonate bodyshells with precision and ease. Designed to outperform traditional masking tape, it makes complex paint schemes simple while delivering crisp, sharp lines every time.

• Fast Drying – Speeds up prep time so you can start painting sooner.

• Easy Application – Apply with a spray gun or brush.

• Reaches Intricate Areas – Perfect for fine details and complex designs.

• Semi-Transparent – See your design clearly while cutting designs.

• No Residue – Peels away cleanly without damaging the bodyshell.

• Sharp, Clean Edges – Reveal flawless paint lines on removal.

Use straight from the bottle if brushing on the shell.  If using a spray gun can be reduced slightly using water to aid flow. 

• Available Sizes – 125ml, 250ml, 500ml, and 1000ml to suit any project.

As shown 

spray guns included

New from Xtreme Aerodynamics the Zenith 1/10th Touring Body.

A new body developed to combine precision, stability, control and performance in a more complete balance.

Includes decals, window masks and hardware.

Supplied clear.

EFRA/ETS Legal.

BRCA Pending.

(Photos may differ slightly from production model.

BattCave JOK3R Front Bumper for Kamtec Monster Mini Bodyshell JKR-BP03

Specifically designed for the Kamtec Monster Mini Bodyshell, our latest 3D printed TPU low-profile front bumper offers increased support and front impact protection by occupying most of the space under the front spoiler. Without it, a front-end collision could potentially force the front spoiler under the chassis, resulting in additional damage and loss of control.

🦇Made for Kamtec Monster Mini body

🦇Designed and printed in the BattCave. 

🦇Increases front impact protection.

🦇Low and wide profile offers additional support. 

The Avalon VORTEX is the new high-performance body from by Avalon Racing – developed and manufactured in Germany, specifically for use in 1/10 scale touring car racing. Designed using state-of-the-art 3D CAD technology and refined through extensive test drives by various drivers on different race tracks, the VORTEX sets new standards in terms of aerodynamics and driving dynamics.

At the heart of the Vortex lies a fundamentally new aerodynamic philosophy. The striking ducktail rear wing simultaneously reduces rotational inertia and generates strong, controllable downforce – for higher cornering speeds and more consistent lap times. The curved rear wing profile ensures optimal airflow and maximum rear stability, whilst the wide adjustment range of the rear wing allows for precise tuning to suit different track conditions, grip levels and driving styles . The high structural and geometric rigidity of the body efficiently transfers aerodynamic loads to the chassis.

Technical highlights at a glance

Maximum rotation and high cornering speed for a precise, direct driving experience
Innovative ducktail rear for improved grip and reduced rotational inertia
Curved rear wing profile for optimum aerodynamic downforce
High structural and geometric rigidity for efficient load transfer to the chassis
Short rear – specifically designed to minimise rotational inertia
BRCA, EFRA and IFMAR homologated

Technical data:

Scale 1:10
Width: approx. 190mm

Available in:
Lightweight 0.5 mm
Regular 0.7 mm

Supplied Clear.

INFO: NO screws or nuts for fitting the rear wing are included.

Fits Louise LMX, Carton M210, Tamiya MB01, M05, M06, M07 with the 210mm short wheelbase lengths.

Width: 160mm
Wheelbase: 210mm
Length: 315mm
Material: LEXAN
Clear protective film: Yes
Pre-drilled mounting holes: No (PRECUT! NO WINDOW MASKS!

Designed to fit chassis such as the Tamiya MB01, & CARTEN M210 an other M-Chassis cars using the 210mm Wheelbase.

Supplied clear.

Items needed to complete
- Lexan Spray Paint
- Hobby Knife or Scissors for trimming