RC Bodies

SUPER DIABLO LIGHT RC MODEL BODY - 1/8th Body

DIABLO EP ULTRA LIGHT RC MODEL BODY - 1/8th Body

CARBURETOR MAIN HIGH-SPEED NEEDLE BODY

HUDY 1/10 TOURING BODYSHELL ANTI-TUCK CARBON STIFFENER - REAR (2)

HUDY BODY POST HOLE PROTECTOR VINYL STICKER 7x16x0.5MM (8)

HUDY BUMPER & BODY SPACE SPONGE SET - 1.5, 3.0, 5.0MM

LIMITED EDITION - REAMER FOR BODY + COVER - LARGE

LIMITED EDITION - REAMER FOR BODY + ALU COVER - SMALL

DRIVE PIN REPLACEMENT TOOL BODY

this is our last model of the Kamtec mini racer 

includes a fast digital servo, Lexan Monster Body, 15T 32sp pinion and a rolling chassis kit. 

Will need a 2S Lipo short or a 4.8v Nimh battery, charger and paint, plus a motor and ESC. 

BattCave JOK3R Front Bumper for Kamtec Monster Mini Bodyshell JKR-BP03

JKR-BP03 - Standard model before + Version

JKR-BP03v2 GRP & Carbon Chassis

JKR-BP03v2A Alloy Chassis 

Specifically designed for the Kamtec Monster Mini Bodyshell, our latest 3D printed TPU low-profile front bumper offers increased support and front impact protection by occupying most of the space under the front spoiler. Without it, a front-end collision could potentially force the front spoiler under the chassis, resulting in additional damage and loss of control.

🦇Made for Kamtec Monster Mini body

🦇Designed and printed in the BattCave. 

🦇Increases front impact protection.

🦇Low and wide profile offers additional support. 

BattCave JOK3R Front Bumper for Kamtec Monster Mini Bodyshell JKR-BP03

JKR-BP03 - Standard model before + Version

JKR-BP03v2 GRP & Carbon Chassis

JKR-BP03v2A Alloy Chassis 

Specifically designed for the Kamtec Monster Mini Bodyshell, our latest 3D printed TPU low-profile front bumper offers increased support and front impact protection by occupying most of the space under the front spoiler. Without it, a front-end collision could potentially force the front spoiler under the chassis, resulting in additional damage and loss of control.

🦇Made for Kamtec Monster Mini body

🦇Designed and printed in the BattCave. 

🦇Increases front impact protection.

🦇Low and wide profile offers additional support. 

BattCave JOK3R Mini Rear Bodypost Mount, JKR-321

Printed with our proprietary methods and our select filaments.

🦇 Sold Individually. 

🦇 3d printed in the BattCave. 

Kyosho Fazer D2 1:10 Chassis Kit

Drifting, or the controlled dynamic sliding of the car, has become one of the most popular categories in R/C cars. In particular, 1/10 scale EP drift cars with rear-wheel drive (RWD) are hugely popular with their dramatic counter-steering drifts. Kyosho has already introduced the FAZER D2 1/10 RWD drift chassis as a fully assembled Readyset paired with highly detailed Toyota 86 GT body. Now in response to strong demand from fans, a body-less, electronics-free chassis kit makes its debut. The FAZER D2 chassis kit shares its core design with the Readyset version but now comes equipped with select option parts as standard. These carefully chosen tuning components enhance overall performance while greatly expanding the chassis kit’s setup options, straight out of the box. Another key feature is the adjustable motor position which allows precise tuning of handling characteristics. The chassis also retains FAZER D2’s defining variable wheelbase system which combines with adjustable rear tread (track width) for compatibility with most 1/10 scale bodies on the market. Delivering performance on par with dedicated competition drift machines at an accessible price, the FAZER D2 chassis kit sets a new standard for RWD drifting.

- Purpose-built RWD drift chassis kit, without body or R/C electronics.
- Add your preferred R/C system and gyro for authentic drift performance.
- Adjustable wheelbase and track support a wide range of 1/10 scale bodies, including FAZER series.
- Compatible with standard drift tires and wheels (5mm offset recommended).
- Aluminum steering crank pins deliver precise, direct steering response.
- Multi-fit battery holder accommodates most standard R/C battery packs.
- Instead of tapping screws used in the Readyset, the chassis kit includes machine screws for greater precision and durability.
- Full ball bearing spec with 22 bearings for drivetrain and steering.
- Compatible with a wide range of optional parts for tuning and upgrades.
- R/C system, gyro, ESC, motor, battery, and tires are required separately.

Features high-mounted motor layout and long-span suspension specifically designed for RWD drifting. Compatible with a wide range of R/C batteries, from standard cylindrical packs to rectangular shorty LiPo types.

Resin main chassis features a front/rear split design. By changing the connection points, wheelbase can be adjusted from 240mm to 273mm for compatibility with a wide range of 1/10 scale bodies.

Front suspension and steering system deliver the large steering angle essential for RWD drifting. Turnbuckle-type steering rods allow precise toe adjustment, and caster angle is also adjustable.

Rear double wishbone suspension provides stable traction performance. Turnbuckle upper arms enable quick and precise camber adjustment, while the split lower arms allow track width changes.

Aluminum oil shocks which were previously optional on the FAZER D2, are now included as standard. Dial adjustable springs allow easy ride height setting and optional shock pistons are included for setup tuning.

Motor (sold separately) can be positioned either forward for balanced handling or at the rear to increase traction.

Rear axle uses a spool (solid axle) with no differential action. While the Readyset uses a resin spool cup, the chassis kit features a steel version, allowing optional gear or ball differentials to be installed without changing the universal swing shafts.

Stealth-type front and rear body mounts are standard, with no exposed posts or pins, just like the Readyset. Conventional body post and pin mounts are also included.

High-efficiency universal swing shafts are standard, designed to resist disengagement during crashes. Fully compatible with optional gear and ball differentials. *When increasing rear track width, compatible optional shafts are required.

Sold as seen.

Appears to be in good working order. Front ball diff apparently. Signs of use underneath. The body has no cracks. 

Sold as seen, appears to have no real cracks and have untested lights fitted 

GOAT is ZooRacing´s new high-performance touring car body. Developed from the experience from the super successful Dogsbollox body, but a more compact and shorter design to generate more rotating for a more fluent driving.

Key areas, like the new, shorter nose- and hood design are optimized and the also the rear section is more compact and much lower to make cornering faster and have a stable rear at the same time.

The new and more pronounced rear spoiler generates more downforce, what gives the car more stabillity when exit corners. The more homogeneous airflow behind the roof reduces drag and turbulences. New inverted fin design on the trunk reduces turbulences and increases static stability at the rear section and results a better approach flow to the new curved designed rear wing.

The rear wing design is curved according the body lines and has a stepped design to improve stability. The result is less flex and more downforce on high speeds.

The handling of the GOAT body is less agressive, than the Wolverine and rotates better, than the Dogsbollox and produces a well ballanced side bite. Perfect for tracks with low to medium grip and modified racing. The GOAT is Great On All Terrains!

On top of that all is the ZOOlite moulding process that reduces the overall weight of our standard thickness 0.7mm body shells by about 10g. This ensures the standard shells are legal for all races with minimum body weight rules, while significantly lowering the overall center of gravity. In addition, GOAT is also available in our proven, Ultralight 0.5mm variant for everyone looking for the outmost of performance. 

With the GOAT, ZooRacing introduces the new 0.4mm AIRlite material. This ist he lightest material by far we ever made for touring car bodies. We recommend this material only for super high grip trackst to reduce tractions rolls and/or tire waste. AIRlite material bodies are mostly faster, but the lifetime of the body is definitely limmited.

Part of the package is a window mask decal set and a high-quality wing mounting hardware and a detailed sticker sheet including grille, head and taillights.

Features:

- CAD designed - Specialized LCG body shell with a more realistic design and less aerodynamic drag - Low, and yet realistic front end with sculptured hood and grille details - Updated Dogsbollox-style roof section for less aerodynamic drag and higher cornering speeds - Recessed roof to channel the airflow and to create greatly improved structural stability thanks to static reinforcement - Structured rear end for anti-tuck capabilities - Large wheel arches allow the body to be placed 4mm front or back (8mm in total) - Large wheel arches ensure the tires will not rub in whatever position - Anti-tuck capabilities with structured side skirts - Static reinforcement on the hood. Especially useful when running the ultra lightweight variant

- ZOOlite 0.7mm standard body weighs in at about 75g cut & including wing - 0.5mm body weighs in at about 55g cut & including wing

- AIRlite 0.4mm weighs in at about 45g cut & including wing - Detailed decal sheet - Window masks - Wing mounting hardware - 100mm grid on the rear truck lid for easy and convenient body mounting - Designed to meet GBS rules

The AGATA project was born from the desire to offer to the rc enthusiast all over the world a body shell that could recall our origins, Emilia land of engines and dream car manufacturers.

Tested over several months on different carpets and asphalts, the body is a new alternative for drivers who not only aim for pure performance but also seek an aesthetic satisfaction fully satisfied by the unique shapes and lines of AGATA.

The AGATA project represents the highest level in the RC industry in terms of development and engineering. We haven't set any limit and with the help of expert team of engineers we have developed a brand new product that features amazing details in terms aesthetic and aerodynamic. 

A parternship with Italian leading CNC factory allowed to obtain the maximum level of precision and quality possible today; we are proud supporters of the real Made in Italybased on the creation, passion and pure innovation.

The design recalls the shapes of the dream-car produced in Emilia, the phase of refinement took several months to optimize every detail, the search of perfection has been obsessive in order to propose a body that could honor our Italian excellence.

AGATA is a GT body with a stunning look, the lowered front nose generates an excellent steering while the wide cab and the neutral sides stabilize the air flows that conveyed into the large rear wing make the model easy to drive, the body is well balanced and does not undermine the set-up of your car.

The body shell meet the specifications needed to participate in any 1/10 GT race in the world, USGT class included.

• Made with high quality and genuine polycarbonate Lexan®
• Included in the kit a complete set of screw, nuts and large plastic washers to fix properly the rear wing
• Front foam (laser cut) to avoid the vibration of the front nose of the body included into the kit
• Produced in Light Weight version, thickness of material 0,75mm
• Sold clear with protective film outside
• Included in the package a decal sheet pre-cut and windows mask

The AGATA project was born from the desire to offer to the rc enthusiast all over the world a body shell that could recall our origins, Emilia land of engines and dream car manufacturers.

Tested over several months on different carpets and asphalts, the body is a new alternative for drivers who not only aim for pure performance but also seek an aesthetic satisfaction fully satisfied by the unique shapes and lines of AGATA.

The AGATA project represents the highest level in the RC industry in terms of development and engineering. We haven't set any limit and with the help of expert team of engineers we have developed a brand new product that features amazing details in terms aesthetic and aerodynamic. 

A parternship with Italian leading CNC factory allowed to obtain the maximum level of precision and quality possible today; we are proud supporters of the real Made in Italybased on the creation, passion and pure innovation.

The design recalls the shapes of the dream-car produced in Emilia, the phase of refinement took several months to optimize every detail, the search of perfection has been obsessive in order to propose a body that could honor our Italian excellence.

AGATA is a GT body with a stunning look, the lowered front nose generates an excellent steering while the wide cab and the neutral sides stabilize the air flows that conveyed into the large rear wing make the model easy to drive, the body is well balanced and does not undermine the set-up of your car.

The body shell meet the specifications needed to participate in any 1/10 GT race in the world, USGT class included.

• Made with high quality and genuine polycarbonate Lexan®
• Included in the kit a complete set of screw, nuts and large plastic washers to fix properly the rear wing
• Front foam (laser cut) to avoid the vibration of the front nose of the body included into the kit
• Produced in Light Weight version, thickness of material 0,75mm
• Sold clear with protective film outside
• Included in the package a decal sheet pre-cut and windows mask

190mm Wide / 256mm Standard 1/10 Car Wheelbase body for such as a Tamiya TT02.

Supplied unpainted - and may not match design, stickers might be limited to Lights & Grills. 

Bittydesign Eptron 1/10 TC 190mm body

Premium Quality first of all

Our philosophy leads us not to settle for mediocrity or speculation, for each project we always pursue the same common thread: the best or nothing. To obtain products that fully meet our expectations, we dedicate months of virtual design and rendering in order to allow us to evaluate any improvements or details to be corrected.

QUALITY without any compromise is the basis of everything we make, the eptron body shell represents the perfect implementation of our philosophy that drives us to do better and that encourages us to make use of our know-how acquired in over 15 years of experience.

Bittydesign Engineering is synonymous with guarantee, authenticity and innovation.

Product Features

The body shell complies with all EFRA, IFMAR, ROAR, BRCA and FEMCA homologation specs, so it can be used in any National and International race.

• Made with high quality and genuine polycarbonate Lexan®
• Included in the kit a complete set of screw, nuts and large plastic washers to fix properly the rear wing
• Produced in Light Weight version as well also Ultra Lite (ULT)
• Fit all the 190mm electric chassis on the market with 257-260mm wheelbase
• Sold clear with protective film outside
• Included in the package a decal sheet pre-cut and windows mask

Bittydesign Magnetic Body Post Marker Kit - Blue - 4pcs

BD-BPMK10-BL Bittydesign Magnetic Body Post Marker Kit - Blue - 4pcs

The Bittydesign Magnetic Body Post Marker Kit is the right choice to make perfect holes on your body shell, 6 different iridium colors to meet your preference.

First of all we are racers like you and we know well how difficult is to make the body post holes perfectly trimmed left and right: the magnets kit resolve the problem with semplicity and rapidity. Say goodbye to wrong holes or bodies mounted not straight on the chassis, with the high-powered magnets you will obtain exact position of your car's body posts in a minute. Check out the ease of use of the tool in the following clip!

The kit is optimized to be used on all the 1/10 scale Off and On-Road cars.

Bittydesign Magnetic Body Post Marker Kit - Blue - 4pcs

BD-BPMK10-BL Bittydesign Magnetic Body Post Marker Kit - Blue - 4pcs

The Bittydesign Magnetic Body Post Marker Kit is the right choice to make perfect holes on your body shell, 6 different iridium colors to meet your preference.

First of all we are racers like you and we know well how difficult is to make the body post holes perfectly trimmed left and right: the magnets kit resolve the problem with semplicity and rapidity. Say goodbye to wrong holes or bodies mounted not straight on the chassis, with the high-powered magnets you will obtain exact position of your car's body posts in a minute. Check out the ease of use of the tool in the following clip!

The kit is optimized to be used on all the 1/10 scale Off and On-Road cars.

Now driving R/C is even more fun Newly designed FZ02L chassis with realistic racing car body

For the pure enjoyment of R/C car driving, the combination of a beautifully reproduced car body with the FAZER series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance to a new level. A simplified design with fewer parts has improved maintenance efficiency and reduced weight while core strength and rigidity has been increased through new materials and ribbing and stiffeners on front and rear. In addition, the symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, irrespective of power source. Featuring slipper clutch, front & rear gear differentials, oil shocks and full ball bearing specs, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 274mm by replacing some parts (sold separately) for compatibility with other 1/10 scale body styles, in addition the body included. The Readyset package comes fully assembled and includes everything except charger and battery for the chassis, and batteries for the transmitter.

- “Ultra Scale Body” replicates the fine details of the actual body of the car. Kyosho took a step further in scale realism.
- New design shaft drive full-time 4WD touring chassis（FZ02）.
- Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter, and battery with charger for the chassis.
- Equipped with 2-bevel grease-filled gear diffs on front and rear.
- Large size dog bones and cup joints realize superior reliability and durability.
- Belt mounting battery compartment allows various battery types to be used.
- Full ball bearings that reduce drive loss equipped throughout the drive system.
- Features KS202W waterproof steering servo.
- Includes completely finished body with color scheme and decals applied.
- Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces.
- Performance can be further enhanced by installing various optional parts.

Completely new chassis realizes low center of gravity with its simple, functional design. Featuring an integrated gearbox that optimizes torsional rigidity of the main chassis, the nylon material reduces weight while improving impact resistance. Each key component has been reinforced in this simple design without upper deck.

Features a reduced number and variety of screws and parts, and consolidation of frequently used screws into the same size. Most screws are flat head screws that can be removed with a 2.0mm hex wrench for easy disassembly.

Handling factors such as bump steer and scrub radius are optimized on front suspension. Simple ball-connected steering knuckle promises reliable control movement. Interchangeable on both front and rear left-right hub carriers optimize spare parts utilization and improve maintenance efficiency.

Includes choice of two offset brake disc wheel hubs with dummy calipers (for visual styling) that provide compatibility with 190mm and 200mm body widths.

Oil shocks mark an evolutionary step up from previous models Oil shock is newly designed. Optimal front-rear geometry and balance simultaneously delivers both light handling and precise control.

Standard spur and pinion gear setting is 68T and 32T, but 9 pinion gear settings can be used from 29T – 37T to produce a wide range of gear ratio settings. The new fixed gear mesh motor mount has holes for use with each different pinion gears. Just simply mount the motor directly to the hole locations corresponding to the pinion gear. No gear mesh adjustment is necessary.

Embodying the true essence of the American Muscle car age, the Dodge Charger featured in many popular TV shows and movies. This 1/10 scale recreation featuring a 2-door hardtop semi-fastback body with its distinctive coke-bottle lines and concealed headlights captures the unique Dodge Charger identity.

New design Vintage Touring Car (VTC) tires & Rostyle type wheels to match vintage car style.

Comes with the new powerful 550 size 14T brushed motor(G14L). The long can with Steel ring around the motor case and internal cooling fan provides efficient torque and high speeds.