RACTIVE

A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model, our rage offers Stanchions with one, two and three balls for chain or rope to pass through in lengths ranging from 6-40mm. Manufactured from brass to tight tolerances our Stanchions are the perfect finishing touch to any model.

• 25mm 1 Ball Stanchion
• Height (excluding fixing pin) 25mm
• Fixing pin length 4mm
• Stanchion bar Ã_x0098_0.85mm
• Ball Ã_x0098_1.8mm
• Hole Ã_x0098_0.75mm
• Pack of 10

A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model, our rage offers Stanchions with one, two and three balls for chain or rope to pass through in lengths ranging from 6-40mm. Manufactured from brass to tight tolerances our Stanchions are the perfect finishing touch to any model.

• 20mm 1 Ball Stanchion
• Height (excluding fixing pin) 20mm
• Fixing pin length 4mm
• Stanchion bar Ã_x0098_0.85mm
• Ball Ã_x0098_1.8mm
• Hole Ã_x0098_0.75mm
• Pack of 10

A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model, our rage offers Stanchions with one, two and three balls for chain or rope to pass through in lengths ranging from 6-40mm. Manufactured from brass to tight tolerances our Stanchions are the perfect finishing touch to any model.

• 15mm 1 Ball Stanchion
• Height (excluding fixing pin) 15mm
• Fixing pin length 4mm
• Stanchion bar Ã_x0098_0.85mm
• Ball Ã_x0098_1.8mm
• Hole Ã_x0098_0.75mm
• Pack of 10

A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model, our rage offers Stanchions with one, two and three balls for chain or rope to pass through in lengths ranging from 6-40mm. Manufactured from brass to tight tolerances our Stanchions are the perfect finishing touch to any model.

• 10mm 1 Ball Stanchion
• Height (excluding fixing pin) 10mm
• Fixing pin length 4mm
• Stanchion bar Ã_x0098_0.85mm
• Ball Ã_x0098_1.8mm
• Hole Ã_x0098_0.75mm
• Pack of 10

A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model, our rage offers Stanchions with one, two and three balls for chain or rope to pass through in lengths ranging from 6-40mm. Manufactured from brass to tight tolerances our Stanchions are the perfect finishing touch to any model.

• 6mm 1 Ball Stanchion
• Height (excluding fixing pin) 6mm
• Fixing pin length 4mm
• Stanchion bar Ã_x0098_0.85mm
• Ball Ã_x0098_1.8mm
• Hole Ã_x0098_0.75mm
• Pack of 10

Pack contains 10 x 22mm 3 Hole RN Stanchions

Pack contains 10 x 15mm 3 Hole RN Stanchions

Pack contains 10 x 11mm 3 Hole RN Stanchions

Capping locating pin is tapered to a point to assist in position marking for drilling of the capping rail. Pack of 10.

Used for tensioning a ship's rigging and lashings, Turnbuckles are a vital element to aid control aboard any vessel. Our new range of fully working scale turnbuckles are turned out of brass to tight tolerances with eyelets at both ends for attaching to rigging meaning these beautifully manufactured pieces not only look the part but function just as well. Varying in body length from 10mm up to 22mm in 2mm increments this range of turnbuckles offer an operating range of 17-24mm up to 29-43mm meaning there is a turnbuckle to suit any scale of model you may desire.

• Body Ã_x0098_3mm, Body Length 22mm
• M2 left/right hand threaded ends
• Eye Ã_x0098_3mm, Hole Ã_x0098_1.6mm
• Operating range 29-43mm
• Pack of 2

Used for tensioning a ship's rigging and lashings, Turnbuckles are a vital element to aid control aboard any vessel. Our new range of fully working scale turnbuckles are turned out of brass to tight tolerances with eyelets at both ends for attaching to rigging meaning these beautifully manufactured pieces not only look the part but function just as well. Varying in body length from 10mm up to 22mm in 2mm increments this range of turnbuckles offer an operating range of 17-24mm up to 29-43mm meaning there is a turnbuckle to suit any scale of model you may desire.

• Body Ã_x0098_3mm, Body Length 20mm
• M2 left/right hand threaded ends
• Eye Ã_x0098_3mm, Hole Ã_x0098_1.6mm
• Operating range 27-41mm
• Pack of 2

Used for tensioning a ship's rigging and lashings, Turnbuckles are a vital element to aid control aboard any vessel. Our new range of fully working scale turnbuckles are turned out of brass to tight tolerances with eyelets at both ends for attaching to rigging meaning these beautifully manufactured pieces not only look the part but function just as well. Varying in body length from 10mm up to 22mm in 2mm increments this range of turnbuckles offer an operating range of 17-24mm up to 29-43mm meaning there is a turnbuckle to suit any scale of model you may desire.

• Body Ã_x0098_3mm, Body Length 18mm
• M2 left/right hand threaded ends
• Eye Ã_x0098_3mm, Hole Ã_x0098_1.6mm
• Operating range 25-39mm
• Pack of 2

Used for tensioning a ship's rigging and lashings, Turnbuckles are a vital element to aid control aboard any vessel. Our new range of fully working scale turnbuckles are turned out of brass to tight tolerances with eyelets at both ends for attaching to rigging meaning these beautifully manufactured pieces not only look the part but function just as well. Varying in body length from 10mm up to 22mm in 2mm increments this range of turnbuckles offer an operating range of 17-24mm up to 29-43mm meaning there is a turnbuckle to suit any scale of model you may desire.

• Body Ã_x0098_3mm, Body Length 16mm
• M2 left/right hand threaded ends
• Eye Ã_x0098_3mm, Hole Ã_x0098_1.6mm
• Operating range 23-36mm
• Pack of 2

Used for tensioning a ship's rigging and lashings, Turnbuckles are a vital element to aid control aboard any vessel. Our new range of fully working scale turnbuckles are turned out of brass to tight tolerances with eyelets at both ends for attaching to rigging meaning these beautifully manufactured pieces not only look the part but function just as well. Varying in body length from 10mm up to 22mm in 2mm increments this range of turnbuckles offer an operating range of 17-24mm up to 29-43mm meaning there is a turnbuckle to suit any scale of model you may desire.

• Body Ã_x0098_3mm, Body Length 14mm
• M2 left/right hand threaded ends
• Eye Ã_x0098_3mm, Hole Ã_x0098_1.6mm
• Operating range 21-32mm
• Pack of 2

Used for tensioning a ship's rigging and lashings, Turnbuckles are a vital element to aid control aboard any vessel. Our new range of fully working scale turnbuckles are turned out of brass to tight tolerances with eyelets at both ends for attaching to rigging meaning these beautifully manufactured pieces not only look the part but function just as well. Varying in body length from 10mm up to 22mm in 2mm increments this range of turnbuckles offer an operating range of 17-24mm up to 29-43mm meaning there is a turnbuckle to suit any scale of model you may desire.

• Body Ã_x0098_3mm, Body Length 12mm
• M2 left/right hand threaded ends
• Eye Ã_x0098_3mm, Hole Ã_x0098_1.6mm
• Operating range 19-28mm
• Pack of 2

Used for tensioning a ship's rigging and lashings, Turnbuckles are a vital element to aid control aboard any vessel. Our new range of fully working scale turnbuckles are turned out of brass to tight tolerances with eyelets at both ends for attaching to rigging meaning these beautifully manufactured pieces not only look the part but function just as well. Varying in body length from 10mm up to 22mm in 2mm increments this range of turnbuckles offer an operating range of 17-24mm up to 29-43mm meaning there is a turnbuckle to suit any scale of model you may desire.

• Body Ã_x0098_3mm, Body Length 10mm
• M2 left/right hand threaded ends
• Eye Ã_x0098_3mm, Hole Ã_x0098_1.6mm
• Operating range 17-24mm
• Pack of 2

Eyes are offset through 90 degrees. For added authenticity the hole through each barrel which would be used for tensioning/de-tensioning is drill at varying points of rotation. Pack of 2.

Eyes are offset through 90 degrees. For added authenticity the hole through each barrel which would be used for tensioning/de-tensioning is drill at varying points of rotation. Pack of 2.

Eyes are offset through 90 degrees. For added authenticity the hole through each barrel which would be used for tensioning/de-tensioning is drill at varying points of rotation. Pack of 2.

Eyes are offset through 90 degrees. For added authenticity the hole through each barrel which would be used for tensioning/de-tensioning is drill at varying points of rotation. Pack of 2.

Eyes are offset through 90 degrees. For added authenticity the hole through each barrel which would be used for tensioning/de-tensioning is drill at varying points of rotation. Pack of 2.

Gypsy wheel is machined to allow simulation of lifting studded link anchor chain sold separately.