Plugs, Connectors & Soldering

Easily spot positive and negative with these aluminum bullet plug grips, whilst also making installing a removing bullet plugs into your battery a much easier task.

Feature:

• For: Power Connection

• Material: Brass/Aluminum

• Color: See photo

Specification:

• Grips : H9.5 x D10.8 mm

Include:

•  Bullet Plug X 1 Set

Screw down caps with 1.5mm Allen Key

Easily spot positive and negative with these aluminum bullet plug grips, whilst also making installing a removing bullet plugs into your battery a much easier task.

Feature:

• For: Power Connection

• Material: Brass/Aluminum

• Color: See photo

Specification:

• Grips : H9.5 x D10.8 mm

Include:

•  Bullet Plug X 1 Set

Screw down caps with 1.5mm Allen Key

Designed for a Tamiya Battery Female output to accept a Males Deans

• T-plug (Deans) female battery plug to Tamiya male plug

T Connector; Black Sockets - pk4

The 1 mm solder wire heats easily and is ideal for use on circuit boards, metals, models & sculptures. Perfect for modelling, jewellery, hobby, electronics & smaller DIY tasks.

Allowing charging or ESC fitment to allow use of 4mm or 5mm Bullet Batteries. Much easier to use than the tight standard plugs.

For use on 4mm bullet connector batteries to typical female deans T plug.

From CORE RC are these Lockdown Heatsink Bullet Plug Grips.

A tight and reliable connection between your LiPo and speed control eliminates any losses of power, increased resistance, arcing and general poor electronic set up.

Giving a reliable connection with an easy twist of the attractive looking locking screw.

Easy to identify Red +ve and Black -ve plugs helps prevent cross connection and that moment every racer dreads, the magic smoke escaping from your speed control !

4/5mm Size.

SOLDERING REQUIRED

ETRONIX XT-90 CONNECTOR (MALE/FEMALE) BLACK

Xt90 is bigger than XT60

Soldering Required

From MonkeyKingRC is this extremely handy Balance Charge Adapter Board.

Plug into the output of your charger using either the XT60 or 4mm bullet connectors and charge a wide variety of batteries with different connector types.

It has the ability to charge XT90, XT60, XT30, T plug and JST in 2S, 3S, 4S, 5S and 6S.

Extremely simple, but great to have at hand in any workshop or pit box.

XT90 is larger than XT60.

These conversion plugs allow the use of 4mm bullet connectors in batteries which have 5mm bullet connectors. After installing these conversion, the battery terminals will stick out and increase risk of short circuit.

Feature:

• For: 5mm Plug Battery

• Material: Brass

• Color: Gold

Include:

• Conversion Plugs (4 pcs)

For anyone looking to finish off a neat electronics installation these low profile plugs with grips set things off. The plugs feature a recess area that makes soldering 11-16gaugae wire easy; whilst the colour grip allows for easy identification of polarity and something to grip onto whilst pulling the connector from the terminal (rather than tugging on the wire to unplug from your battery). Finished off with a RC Overhaul logo lasered on top they are not only stylish but functional accessory for anyone looking to overhaul their wiring.

These fit all batteries with a 4mm bullet terminal.

Use a few drops of CA glue to install the grip once the wire has been soldered to the plug.

For anyone looking to finish off a neat electronics installation these low profile plugs with grips set things off. The plugs feature a recess area that makes soldering 11-16gaugae wire easy; whilst the colour grip allows for easy identification of polarity and something to grip onto whilst pulling the connector from the terminal (rather than tugging on the wire to unplug from your battery). Finished off with a RC Overhaul logo lasered on top they are not only stylish but functional accessory for anyone looking to overhaul their wiring.

These fit all batteries with a 4mm bullet terminal.

Use a few drops of CA glue to install the grip once the wire has been soldered to the plug.

Awesome plug covers that help with the removal of your battery plugs. Plus, assist you in plugging in the correct polarity.

Super bling look!

Male plugs - found Fitted to SKY RC Chargers & ESC's. 

These connectors are made from high-temp yellow nylon with gold-plated spring pins or sockets moulded in. The shape of the XT60 prevents reverse polarity, and when plugged in the connection is super-solid. Perfect for applications up to 60A continuous current draw.

These versions use sheath housing, no need to use heat shrink tube, enhances overall performance in handling and durability.

4 Male plugs.

The popular T style plug and socket with the addition of clip-on insulating caps from Amass. These caps replace the need for heatshrink tubing and provide extra grip.  As with the original connector, this new plug is made from nylon, making them very tough and difficult to melt when soldering. They have sprung steel blades to prevent the terminals coming apart accidentally and gold plated terminals for a good connection.

Backwards compatible with original T connectors so you can use them straight away.

It is recommended to always select the female deans plug for a battery terminal, to reduce the chance of short-circuits.