Louise RC

This is a clear polycarbonate body parts set of the in 210mm Wheelbase for 1/10 MTC / M-Chassis Kits

Key Features:

• Perfect Fit: Designed for a 210mm wheelbase and 165-170mm width for optimal performance and style.
• Durable Clear Lexan Construction: Lightweight yet sturdy, ensuring longevity and resilience on the track.
• Customizable: Comes with stickers (not all as shown)

Which Tamiya Chassis? (Will fit other MTC Makes)

• MB-01 (Modern/Current): This versatile, modern chassis allows for front (FWD) or rear (RWD) motor layouts, and specifically supports a 210mm wheelbase by adjusting its modular frame.
• M-08 Concept (Current RWD): A high-performance rear-midship chassis specifically designed to be assembled in S (210mm), M (225mm), or L (239mm) wheelbases.
• M-07 Concept (Current FWD): Primarily designed for 225mm/239mm, but some iterations and setups can accommodate it; however, the M-08 is generally favored for 210mm.
• MF-01X (4WD): This 4WD shaft-driven chassis can be assembled in 210mm (S), 225mm (M), or 239mm (L) configurations by adding or removing spacer parts.
• M-05 / M-05 Ver.II (Classic FWD): The standard FWD chassis for many years. It supports 210mm, 225mm, and 239mm configurations.
• M-06 (Classic RWD): Designed for rear-motor, rear-drive, it supports 210mm (S), 225mm (M), and 239mm (L).
• M-03 (Vintage FWD): The classic, older FWD M-Chassis often used in 210mm Mini Cooper kits.
• M-02 (Vintage RWD): Older rear-drive chassis.
• M-01 (Vintage 4WD/FWD): Original Mini Cooper chassis.
• XM-01 Pro (Rally 4WD): The modern 4WD rally chassis which supports three types of wheelbase.
• also Fits Carten And Louise MTX Range

Comes with window masks & stickers

Four Steps to On-Road Ready

1. Clean Body and apply included window mask
2. Paint then peel the over-spray film off
3. Sticker your body (decal sheet included)
4. Mount your new body onto your Car

This is a clear polycarbonate body parts set of the in 225mm Wheelbase for 1/10 MTC / M-Chassis Kits

Key Features:

• Perfect Fit: Designed for a 225mm wheelbase and 165-170mm width for optimal performance and style.
• Durable Clear Lexan Construction: Lightweight yet sturdy, ensuring longevity and resilience on the track.
• Customizable: Comes with stickers (not all as shown)

Which Tamiya Chassis? (Will fit other MTC Makes)

• MB-01 (Modern/Current): This versatile, modern chassis allows for front (FWD) or rear (RWD) motor layouts, and specifically supports a 210mm wheelbase by adjusting its modular frame to 225mm or 239mm.
• M-08 Concept (Current RWD): A high-performance rear-midship chassis specifically designed to be assembled in S (210mm), M (225mm), or L (239mm) wheelbases.
• M-07 Concept (Current FWD): Primarily designed for 225mm/239mm, but some iterations and setups can accommodate it; however, the M-08 is generally favored for 210mm.
• MF-01X (4WD): This 4WD shaft-driven chassis can be assembled in 210mm (S), 225mm (M), or 239mm (L) configurations by adding or removing spacer parts.
• M-05 / M-05 Ver.II (Classic FWD): The standard FWD chassis for many years. It supports 210mm, 225mm, and 239mm configurations.
• M-06 (Classic RWD): Designed for rear-motor, rear-drive, it supports 210mm (S), 225mm (M), and 239mm (L).
• M-02 (Vintage RWD): Older rear-drive chassis.
• M-01 (Vintage 4WD/FWD): Original Mini Cooper chassis.
• XM-01 Pro (Rally 4WD): The modern 4WD rally chassis which supports three types of wheelbase.
• Also Fits Carten And Louise MTX Range when changed to 225mm wheebase

Comes with window masks & stickers

Four Steps to On-Road Ready

1. Clean Body and apply included window mask
2. Paint then peel the over-spray film off
3. Sticker your body (decal sheet included)
4. Mount your new body onto your Car

This is a clear polycarbonate body parts set of the in 210mm Wheelbase for 1/10 MTC / M-Chassis Kits

Key Features:

• Perfect Fit: Designed for a 210mm wheelbase and 165-170mm width for optimal performance and style.
• Durable Clear Lexan Construction: Lightweight yet sturdy, ensuring longevity and resilience on the track.
• Customizable: Comes with stickers (not all as shown)

Which Tamiya Chassis? (Will fit other MTC Makes)

• MB-01 (Modern/Current): This versatile, modern chassis allows for front (FWD) or rear (RWD) motor layouts, and specifically supports a 210mm wheelbase by adjusting its modular frame.
• M-08 Concept (Current RWD): A high-performance rear-midship chassis specifically designed to be assembled in S (210mm), M (225mm), or L (239mm) wheelbases.
• M-07 Concept (Current FWD): Primarily designed for 225mm/239mm, but some iterations and setups can accommodate it; however, the M-08 is generally favored for 210mm.
• MF-01X (4WD): This 4WD shaft-driven chassis can be assembled in 210mm (S), 225mm (M), or 239mm (L) configurations by adding or removing spacer parts.
• M-05 / M-05 Ver.II (Classic FWD): The standard FWD chassis for many years. It supports 210mm, 225mm, and 239mm configurations.
• M-06 (Classic RWD): Designed for rear-motor, rear-drive, it supports 210mm (S), 225mm (M), and 239mm (L).
• M-03 (Vintage FWD): The classic, older FWD M-Chassis often used in 210mm Mini Cooper kits.
• M-02 (Vintage RWD): Older rear-drive chassis.
• M-01 (Vintage 4WD/FWD): Original Mini Cooper chassis.
• XM-01 Pro (Rally 4WD): The modern 4WD rally chassis which supports three types of wheelbase.
• also Fits Carten And Louise MTX Range

Comes with window masks & stickers

Four Steps to On-Road Ready

1. Clean Body and apply included window mask
2. Paint then peel the over-spray film off
3. Sticker your body (decal sheet included)
4. Mount your new body onto your Car

This is a clear polycarbonate body parts set of the in 210mm Wheelbase for 1/10 MTC / M-Chassis Kits

Key Features:

• Perfect Fit: Designed for a 210mm wheelbase and 165-170mm width for optimal performance and style.
• Durable Clear Lexan Construction: Lightweight yet sturdy, ensuring longevity and resilience on the track.
• Customizable: Comes with stickers (not all as shown)

Which Tamiya Chassis? (Will fit other MTC Makes)

• MB-01 (Modern/Current): This versatile, modern chassis allows for front (FWD) or rear (RWD) motor layouts, and specifically supports a 210mm wheelbase by adjusting its modular frame.
• M-08 Concept (Current RWD): A high-performance rear-midship chassis specifically designed to be assembled in S (210mm), M (225mm), or L (239mm) wheelbases.
• M-07 Concept (Current FWD): Primarily designed for 225mm/239mm, but some iterations and setups can accommodate it; however, the M-08 is generally favored for 210mm.
• MF-01X (4WD): This 4WD shaft-driven chassis can be assembled in 210mm (S), 225mm (M), or 239mm (L) configurations by adding or removing spacer parts.
• M-05 / M-05 Ver.II (Classic FWD): The standard FWD chassis for many years. It supports 210mm, 225mm, and 239mm configurations.
• M-06 (Classic RWD): Designed for rear-motor, rear-drive, it supports 210mm (S), 225mm (M), and 239mm (L).
• M-03 (Vintage FWD): The classic, older FWD M-Chassis often used in 210mm Mini Cooper kits.
• M-02 (Vintage RWD): Older rear-drive chassis.
• M-01 (Vintage 4WD/FWD): Original Mini Cooper chassis.
• XM-01 Pro (Rally 4WD): The modern 4WD rally chassis which supports three types of wheelbase.
• also Fits Carten And Louise MTX Range

Comes with window masks & stickers

Four Steps to On-Road Ready

1. Clean Body and apply included window mask
2. Paint then peel the over-spray film off
3. Sticker your body (decal sheet included)
4. Mount your new body onto your Car

This is a clear polycarbonate body parts set of the in 210mm Wheelbase for 1/10 MTC / M-Chassis Kits

Key Features:

• Perfect Fit: Designed for a 210mm wheelbase and 165-170mm width for optimal performance and style.
• Durable Clear Lexan Construction: Lightweight yet sturdy, ensuring longevity and resilience on the track.
• Customizable: Comes with stickers (not all as shown)

Which Tamiya Chassis? (Will fit other MTC Makes)

• MB-01 (Modern/Current): This versatile, modern chassis allows for front (FWD) or rear (RWD) motor layouts, and specifically supports a 210mm wheelbase by adjusting its modular frame.
• M-08 Concept (Current RWD): A high-performance rear-midship chassis specifically designed to be assembled in S (210mm), M (225mm), or L (239mm) wheelbases.
• M-07 Concept (Current FWD): Primarily designed for 225mm/239mm, but some iterations and setups can accommodate it; however, the M-08 is generally favored for 210mm.
• MF-01X (4WD): This 4WD shaft-driven chassis can be assembled in 210mm (S), 225mm (M), or 239mm (L) configurations by adding or removing spacer parts.
• M-05 / M-05 Ver.II (Classic FWD): The standard FWD chassis for many years. It supports 210mm, 225mm, and 239mm configurations.
• M-06 (Classic RWD): Designed for rear-motor, rear-drive, it supports 210mm (S), 225mm (M), and 239mm (L).
• M-03 (Vintage FWD): The classic, older FWD M-Chassis often used in 210mm Mini Cooper kits.
• M-02 (Vintage RWD): Older rear-drive chassis.
• M-01 (Vintage 4WD/FWD): Original Mini Cooper chassis.
• XM-01 Pro (Rally 4WD): The modern 4WD rally chassis which supports three types of wheelbase.
• also Fits Carten And Louise MTX Range

Comes with window masks & stickers

Four Steps to On-Road Ready

1. Clean Body and apply included window mask
2. Paint then peel the over-spray film off
3. Sticker your body (decal sheet included)
4. Mount your new body onto your Car

This is a clear polycarbonate body parts set of the in 210mm Wheelbase for 1/10 MTC / M-Chassis Kits

Key Features:

• Perfect Fit: Designed for a 210mm wheelbase and 165-170mm width for optimal performance and style.
• Durable Clear Lexan Construction: Lightweight yet sturdy, ensuring longevity and resilience on the track.
• Customizable: Comes with stickers (not all as shown)

Which Tamiya Chassis? (Will fit other MTC Makes)

• MB-01 (Modern/Current): This versatile, modern chassis allows for front (FWD) or rear (RWD) motor layouts, and specifically supports a 210mm wheelbase by adjusting its modular frame.
• M-08 Concept (Current RWD): A high-performance rear-midship chassis specifically designed to be assembled in S (210mm), M (225mm), or L (239mm) wheelbases.
• M-07 Concept (Current FWD): Primarily designed for 225mm/239mm, but some iterations and setups can accommodate it; however, the M-08 is generally favored for 210mm.
• MF-01X (4WD): This 4WD shaft-driven chassis can be assembled in 210mm (S), 225mm (M), or 239mm (L) configurations by adding or removing spacer parts.
• M-05 / M-05 Ver.II (Classic FWD): The standard FWD chassis for many years. It supports 210mm, 225mm, and 239mm configurations.
• M-06 (Classic RWD): Designed for rear-motor, rear-drive, it supports 210mm (S), 225mm (M), and 239mm (L).
• M-03 (Vintage FWD): The classic, older FWD M-Chassis often used in 210mm Mini Cooper kits.
• M-02 (Vintage RWD): Older rear-drive chassis.
• M-01 (Vintage 4WD/FWD): Original Mini Cooper chassis.
• XM-01 Pro (Rally 4WD): The modern 4WD rally chassis which supports three types of wheelbase.
• also Fits Carten And Louise MTX Range

Comes with window masks & stickers

Four Steps to On-Road Ready

1. Clean Body and apply included window mask
2. Paint then peel the over-spray film off
3. Sticker your body (decal sheet included)
4. Mount your new body onto your Car

This is a clear polycarbonate body parts set of the in 210mm Wheelbase for 1/10 MTC / M-Chassis Kits

Key Features:

• Perfect Fit: Designed for a 210mm wheelbase and 165-170mm width for optimal performance and style.
• Durable Clear Lexan Construction: Lightweight yet sturdy, ensuring longevity and resilience on the track.
• Customizable: Comes with stickers (not all as shown)

Which Tamiya Chassis? (Will fit other MTC Makes)

• MB-01 (Modern/Current): This versatile, modern chassis allows for front (FWD) or rear (RWD) motor layouts, and specifically supports a 210mm wheelbase by adjusting its modular frame.
• M-08 Concept (Current RWD): A high-performance rear-midship chassis specifically designed to be assembled in S (210mm), M (225mm), or L (239mm) wheelbases.
• M-07 Concept (Current FWD): Primarily designed for 225mm/239mm, but some iterations and setups can accommodate it; however, the M-08 is generally favored for 210mm.
• MF-01X (4WD): This 4WD shaft-driven chassis can be assembled in 210mm (S), 225mm (M), or 239mm (L) configurations by adding or removing spacer parts.
• M-05 / M-05 Ver.II (Classic FWD): The standard FWD chassis for many years. It supports 210mm, 225mm, and 239mm configurations.
• M-06 (Classic RWD): Designed for rear-motor, rear-drive, it supports 210mm (S), 225mm (M), and 239mm (L).
• M-03 (Vintage FWD): The classic, older FWD M-Chassis often used in 210mm Mini Cooper kits.
• M-02 (Vintage RWD): Older rear-drive chassis.
• M-01 (Vintage 4WD/FWD): Original Mini Cooper chassis.
• XM-01 Pro (Rally 4WD): The modern 4WD rally chassis which supports three types of wheelbase.
• also Fits Carten And Louise MTX Range

Comes with window masks & stickers

Four Steps to On-Road Ready

1. Clean Body and apply included window mask
2. Paint then peel the over-spray film off
3. Sticker your body (decal sheet included)
4. Mount your new body onto your Car

OUISE RC 1/10 LTX TOURING CAR KIT

Same As Carten T410R Pro

This is a full sized 1/10 Car, 190mm wide by 256-258mm Wheelbase.

Features

• Full Bearing.
• CVD Drive Shaft.
• Carbon Fibre Chassis, Upper Deck, Shock Tower.
• Aluminium Motor Mount.
• Aluminium Servo Mount.
• Aluminium Centre Drive Shaft.
• Aluminium Spur Gear Hub.
• Aluminium Shocks.
• Aluminium 12mm Hex Hub.
• Metal Gear Diff.
• Full Turnbuckle.

Requires:

1/10 Car Body, 7.4V Square Lipo, Radio Set, Servo, ESC & Motor. Wheels and Tyres normally included.

Specifications

Drivetrain: Shaft Drive 4WD
Track Width: 190mm
Wheelbase: 258mm
Internal Ratio: 2.47
Gear Ratio: 4.56
Tyre Diameter: 65mm

SPOKE BLACK +1MM (4PCS)

Fits Louise LMX, Carton M210, Tamiya MB01, M05, M06, M07 with the 210mm short wheelbase lengths.

Width: 160mm
Wheelbase: 210mm
Length: 315mm
Material: LEXAN
Clear protective film: Yes
Pre-drilled mounting holes: No (PRECUT! NO WINDOW MASKS!

Designed to fit chassis such as the Tamiya MB01, & CARTEN M210 an other M-Chassis cars using the 210mm Wheelbase.

Supplied clear.

Items needed to complete
- Lexan Spray Paint
- Hobby Knife or Scissors for trimming

Items shown in diagram are for example of area intended for fitment only. Only the parts in the main photo are included.

Heavy DUTY Plastic Gear made from Derlin

CARBON BATTERY HOLDER

Heavy DUTY STEEL

JOINT(HEAVY DUTY)

Items shown in diagram are for example of area intended for fitment only. Only the parts in the main photo are included.

LOUISE RC SHOCK PARTS or Carten

LOUISE / Carten RC GEAR DIFFERENTIAL

LOUISE RC SHOCK PARTS or Carten