LOS

UPDATED LEAN BARS

The Promoto-SM lean bar positioning has been updated so it can lean farther than its dirt bike counterpart. New rubber lean bar tyres, mounted on bearings, reduce noise and offer better traction on hard surfaces. Adjustable stops are included for up and down travel, so you can dial in the bike for any surface or grip level. The lean bars also often help with crash recovery when the rear tyre has traction. If the bike is down on the track, simply hit the throttle to stand it upright and resume driving.

PATENT-PENDING SPEKTRUM MS6X TECHNOLOGY

The included Spektrum DX3PM transmitter and SR6300PM receiver combine with patent-pending MS6X technology for unprecedented control. Promoto-SM drivers can maintain balance at high or low speeds while maneuvering over concrete, asphalt, blacktop, and other hard surfaces. For more aggressive driving and extreme cornering angles, use the MS6X knob to increase the lean angle.

"ON THE FLY" DRIVE MODES

The DX3PM has three preprogrammed drive modes that you can toggle between "on the fly" using your thumb on the A/B rocker switch.

• Dirt Mode - Allows the Promoto-SM to pitch up enough without clipping the throttle for going up jump faces and obstacles, but helps prevent "wheelie-overs" by intuitively clipping the throttle output if the bike begins to pitch up too far.
• Street Mode - Senses when the Promoto-SM starts to pitch up and clips the throttle quickly, getting the front tyre back on the ground to accelerate as much as possible.
• Wheelie Control - Let 'em rip! Wheelie Control lets you hold wheelies on smooth surfaces all the way to top speed.

SMART TECHNOLOGY

How much battery life is left on your bike? You don't have to guess. LED indicators on the DX3PM transmitter show you the remaining capacity of your Spektrum Smart batteries at glance! Using Spektrum Smart Technology, the Promoto-SM stores and shares critical performance data while you run. Smart technology also simplifies battery charging. When you connect the included Smart battery to a Spektrum Smart charger, the battery's unique charging requirements upload automatically from its memory microchip through the IC connector's data wire to the Smart charger. Safe charging begins automatically! (You can receive additional telemetry information in real-time, such as speed, RPM, amp draw, ESC temperature, and more, by upgrading to the Spektrum DX5C or DX5 Pro transmitter.)

UPDATED BRAKE CALIPERS & PISTON

Although the original Promoto-MX front brake system worked well, the design team thought that improvements could be made. An all-new caliper and floating piston were designed to apply a larger pressure area to the brake pad. Also, a new Metal Injection Molded (MIM) piston shaft is installed on the bearings for smoother operation and a better seal again dust and debris. All of this adds up to a shorter stopping distance and more consistent braking operation.

FLYWHEEL UNIT

The gyroscopic stabilization force created by its heavy steel flywheel - spinning at over 22,000 rpm with the 2700Kv motor - does wonders for the motorcycle's stability. Mounted as low and as far forward as possible in the frame, the flywheel unit enables the Promoto-SM to pivot around its centre point to improve jumping, changes of direction, and the accuracy of the bike's performance.

HEAD DAMPING

With eight pounds rapidly powering down the track, it takes quite a stiff servo saver spring setup to properly guide the Promoto-SM into the next turn. Like anything heavily sprung, the best way to control the strong springs is to dampen the movement. A key development for the Promoto platform is a fluid-filled friction chamber between the upper and lower head tube bearings. The chamber is filled with heavy 500,000cSt which dampens the servo saver well and helps to control any possible "head shake."

SERVO SAVER

The servo saver's stiff circular springs, captured by bearing-mounted composite plates, provide consistency in steering with enough give to protect the servo. But that's not all. It also drastically improves the bike's performance when setting down from wheelies, landing from jumps, power sliding through a turn, and pushing the front tyre over a curb. It gives so the bike stays up.

ELECTRONICS INCLUDED

• Transmitter (Spektrum DX3PM Smart DSMR)
• Receiver (Spektrum 6-Channel DSMR Promoto Receiver)
• Steering Servo (Spektrum S620PM Metal Gear Servo)
• Front Brake Servo (Spektrum SX108PM Micro Servo)
• Motor (Spektrum Firma 3652 3800Kv 4-Pole Brushless Motor)
• Flywheel Assembly (Spektrum Motorcycle Stator & ESC Assembly / Spektrum Motorcycle Flywheel Assembly)
• Electronic Speed Control (Spektrum Firma 85A Brushless Smart Motorcycle ESC)
• Battery (Spektrum 5000mAh 2S 7.4V Smart G2 50C LiPo Battery with IC5 Connector)
• Charger (Spektrum Smart S120 USB-C Charger, 1x20W) with IC3 / IC5 adapter

NARROW CHASSIS

To capture the proper scale looks, the bike's electronics and battery all had to fit within a compact, narrow chassis. Requiring a special "shorty" battery would have made the design task simple, but the Promoto-SM product development team wanted to use a more convenient, standard size battery. Mission accomplished! A full-size 2S hardcase LiPo fits within the rider's seat, easy to access for quick battery changes. Pop in a charged pack and you're back in seconds to leading your competition.

REALISTIC RIDER FIGURE

The rider figures of other RC motorcycles are made entyrely of foam, which quickly fails. Promoto riders have a rubberized plastic exterior that can give and flex under impacts and flips. To keep the rider from bobbling around on the bike, the torso has a foam insert. It keeps the body firm during normal operation but still able to give under impact. With its updated gear, the Promoto-SM rider looks ready for aggressive on-road racing action!

PRO-LINE RACING OE (ORIGINAL EQUIPMENT) SUPERMOTO STREET TYRES

The Promoto-SM is outfitted with new Pro-Line Racing OE (Original Equipment) Supermoto street tyres. In addition to complementing the bike's scale looks, the Supermoto tyres are designed specifically for the unique wear and traction requirements of supermoto-style road racing.

DISPLAY/MAINTENANCE & STARTING STANDS

Working on a real bike is easier with a proper bike stand. So the Promoto-SM had to have one, too! The included stand for maintenance and display is modeled after a real bike stand, complete with graphics. To keep the bike balanced on the stand, the Promoto-SM keys into the bike stand. But taking it a step further, a hands-free starting stand is also included. This starting stand cradles the rear tyre and holds the bike upright and ready for a gate-style start.

TRUE-SPOKE WHEELS

Before Losi introduced the Promoto platform, no other manufacturers had been able to create proper-looking spoked wheels with the durability needed for an RC bike. It took the determination and expertise of the Losi product development team to make it happen. For the Promoto-SM, the realistic, true-spoke wheels are smaller, in keeping with the design of real on-road motorcycles.

PLASTICS WITH GRAPHICS

Big or small, no street bike would look right without a proper body panel kit wrapped in vinyl graphics. The Promoto-SM has all the goods - fenders, number plate, fork guards, front and rear side panels - all looking fresh wrapped in updated, highly durable vinyl graphics.

REALISTIC DETAILS

Even tiny touches matter, and Losi hasn't overlooked a thing - exhaust, brake line, foot pegs, brake rotors, you name it. The Promoto-SM also includes hand guards, recreating those used on full-size supermoto bikes to protect the brake and clutch levers during a fall.

REAR FENDER

Wheelies happen. A normal, rigid-mounted rear fender would really take a beating. But the Promoto-SM has the solution - a hinged elastomer sprung rear fender that can deflect out of the way during wheelies to expose a durable nylon rear bumper. It substantially increases the durability of the rear fender.

FRONT CRASH STRUCTURE

The front crash structure of the Promoto-SM is rigid during normal running, but compresses until the front tyre bottoms into the chassis frame to absorb front impacts. That protects the front fork tubes from bending, keeping them safe and true.

SKID PLATES & AIR VENTS

Molded composite skid plates line the front and bottom of the Promoto-SM chassis. They offer protection during crashes and keep debris out of the chassis, helping to protect the electronics mounted inside. The air vents on each side of the bike come closed in the box, but can be opened to provide cooling airflow when ambient temperatures are high.

TWIN ALUMINIUM PLATE CHASSIS

Twin aluminium chassis plates house and protect all of the bike's electronics and help to give the Promoto-SM its realistically narrow appearance. They also give the frame the rigidity and durability required for harsh impacts.

FRONT FORK

The front fork of the Promoto-SM is another Losi innovation with an internal spring and dampener. Designed to work similar to normal RC shocks, the front fork tubes can be rebuilt and tuned by changing the silicone dampening fluid. Using counter-wound upper and lower springs, spacers can be used to adjust the ride height of the Promoto-SM as well. And maybe most importantly, they look awesome - just like the real deal.

RISING RATE REAR SUSPENSION

Just like a real bike, the Promoto-SM has a rising rate rear suspension. The suspension starts soft around ride height, for smooth handling and a superior grip. It becomes firmer as it gets deeper into up travel, to provide proper preload on jumps and prevent bottoming out in landings. Dialed in with a full oil-filled coil-over shock, the Promoto-SM is ready to rip over any on-road surface.

BRUSHLESS POWER SYSTEM

The Promoto-SM comes out of the gates HOT with a powerful Spektrum Smart brushless power system. Its 4-pole 3652 3800Kv motor puts down the power while the 85A brushless ESC adds all the control you need. With massive 40+ mph top speeds on a 2S LiPo battery, the Promoto-SM power system rips!

HEAD ANGLE

After months of testing different trail settings, head angle, and steering ratios, the Promoto-SM product development team found the sweet spot. A head tube angle of 62.4 degrees gives it the best balance of bump handling, landing jumps, steering input, and "head shake" control on all surfaces.

RACE-INSPIRED SLIPPER CLUTCH

As its 3800Kv Spektrum Firma Brushless motor puts out abundant power, the Promoto-SM's race inspired dual disc slipper clutch helps the rear tyre maintain traction on a variety of surfaces. The dual pad, spring pressurized slipper clutch takes inspiration from those that the TLR team uses to win races across the globe. It increases traction and protects the drivetrain without sacrificing explosive drive.

FRONT CABLE-DRIVEN DISC BRAKE

Hauling on your bike is a lot more fun when you've got good brakes. The motor can handle rear braking through the drivetrain, but like 1:1 motorcycles, most of the braking happens with the front tyre. To slow the Promoto-SM down from the front, the front brake uses a steel rotor, caliper-actuated brake pads, and servo-driven cable. It cuts your stopping distance in half.

REALISTIC CHAIN DRIVE

We could not call the Promoto-SM a true street racing bike if wasn't chain driven. Steel links and 70 roller pins wrap around a 10-tooth steel drive sprocket and a 36-tooth aluminium hub sprocket. Regardless of conditions, the chain drive will drive the rear tyre efficiently and reliably.

READY-TO-RUN

The Losi Promoto-SM comes fully assembled, with a high-quality Spektrum Smart radio system included and on-board electronics already installed. A powerful Spektrum 2S LiPo battery, convenient Smart USB charger, and AA transmitter batteries are also supplied.

UPDATED LEAN BARS

The Promoto-SM lean bar positioning has been updated so it can lean farther than its dirt bike counterpart. New rubber lean bar tyres, mounted on bearings, reduce noise and offer better traction on hard surfaces. Adjustable stops are included for up and down travel, so you can dial in the bike for any surface or grip level. The lean bars also often help with crash recovery when the rear tyre has traction. If the bike is down on the track, simply hit the throttle to stand it upright and resume driving.

PATENT-PENDING SPEKTRUM MS6X TECHNOLOGY

The included Spektrum DX3PM transmitter and SR6300PM receiver combine with patent-pending MS6X technology for unprecedented control. Promoto-SM drivers can maintain balance at high or low speeds while maneuvering over concrete, asphalt, blacktop, and other hard surfaces. For more aggressive driving and extreme cornering angles, use the MS6X knob to increase the lean angle.

"ON THE FLY" DRIVE MODES

The DX3PM has three preprogrammed drive modes that you can toggle between "on the fly" using your thumb on the A/B rocker switch.

• Dirt Mode - Allows the Promoto-SM to pitch up enough without clipping the throttle for going up jump faces and obstacles, but helps prevent "wheelie-overs" by intuitively clipping the throttle output if the bike begins to pitch up too far.
• Street Mode - Senses when the Promoto-SM starts to pitch up and clips the throttle quickly, getting the front tyre back on the ground to accelerate as much as possible.
• Wheelie Control - Let 'em rip! Wheelie Control lets you hold wheelies on smooth surfaces all the way to top speed.

SMART TECHNOLOGY

How much battery life is left on your bike? You don't have to guess. LED indicators on the DX3PM transmitter show you the remaining capacity of your Spektrum Smart batteries at glance! Using Spektrum Smart Technology, the Promoto-SM stores and shares critical performance data while you run. Smart technology also simplifies battery charging. When you connect a Smart battery to a Spektrum Smart charger, the battery's unique charging requirements upload automatically from its memory microchip through the IC connector's data wire to the Smart charger. Safe charging begins automatically! (You can receive additional telemetry information in real-time, such as speed, RPM, amp draw, ESC temperature, and more, by upgrading to the Spektrum DX5C or DX5 Pro transmitter.)

UPDATED BRAKE CALIPERS & PISTON

Although the original Promoto-MX front brake system worked well, the design team thought that improvements could be made. An all-new caliper and floating piston were designed to apply a larger pressure area to the brake pad. Also, a new Metal Injection Molded (MIM) piston shaft is installed on the bearings for smoother operation and a better seal again dust and debris. All of this adds up to a shorter stopping distance and more consistent braking operation.

FLYWHEEL UNIT

The gyroscopic stabilization force created by its heavy steel flywheel - spinning at over 22,000 rpm with the 2700Kv motor - does wonders for the motorcycle's stability. Mounted as low and as far forward as possible in the frame, the flywheel unit enables the Promoto-SM to pivot around its centre point to improve jumping, changes of direction, and the accuracy of the bike's performance.

HEAD DAMPING

With eight pounds rapidly powering down the track, it takes quite a stiff servo saver spring setup to properly guide the Promoto-SM into the next turn. Like anything heavily sprung, the best way to control the strong springs is to dampen the movement. A key development for the Promoto platform is a fluid-filled friction chamber between the upper and lower head tube bearings. The chamber is filled with heavy 500,000cSt which dampens the servo saver well and helps to control any possible "head shake."

SERVO SAVER

The servo saver's stiff circular springs, captured by bearing-mounted composite plates, provide consistency in steering with enough give to protect the servo. But that's not all. It also drastically improves the bike's performance when setting down from wheelies, landing from jumps, power sliding through a turn, and pushing the front tyre over a curb. It gives so the bike stays up.

ELECTRONICS INCLUDED

• Transmitter (Spektrum DX3PM Smart DSMR)
• Receiver (Spektrum 6-Channel DSMR Promoto Receiver)
• Steering Servo (Spektrum S620PM Metal Gear Servo)
• Front Brake Servo (Spektrum SX108PM Micro Servo)
• Motor (Spektrum Firma 3652 3800Kv 4-Pole Brushless Motor)
• Flywheel Assembly (Spektrum Motorcycle Stator & ESC Assembly / Spektrum Motorcycle Flywheel Assembly)
• Electronic Speed Control (Spektrum Firma 85A Brushless Smart Motorcycle ESC)

NARROW CHASSIS

To capture the proper scale looks, the bike's electronics and battery all had to fit within a compact, narrow chassis. Requiring a special "shorty" battery would have made the design task simple, but the Promoto-SM product development team wanted to use a more convenient, standard size battery. Mission accomplished! A full-size 2S hardcase LiPo fits within the rider's seat, easy to access for quick battery changes. Pop in a charged pack and you're back in seconds to leading your competition.

REALISTIC RIDER FIGURE

The rider figures of other RC motorcycles are made entyrely of foam, which quickly fails. Promoto riders have a rubberized plastic exterior that can give and flex under impacts and flips. To keep the rider from bobbling around on the bike, the torso has a foam insert. It keeps the body firm during normal operation but still able to give under impact. With its updated gear, the Promoto-SM rider looks ready for aggressive on-road racing action!

PRO-LINE RACING OE (ORIGINAL EQUIPMENT) SUPERMOTO STREET TYRES

The Promoto-SM is outfitted with new Pro-Line Racing OE (Original Equipment) Supermoto street tyres. In addition to complementing the bike's scale looks, the Supermoto tyres are designed specifically for the unique wear and traction requirements of supermoto-style road racing.

DISPLAY/MAINTENANCE & STARTING STANDS

Working on a real bike is easier with a proper bike stand. So the Promoto-SM had to have one, too! The included stand for maintenance and display is modeled after a real bike stand, complete with graphics. To keep the bike balanced on the stand, the Promoto-SM keys into the bike stand. But taking it a step further, a hands-free starting stand is also included. This starting stand cradles the rear tyre and holds the bike upright and ready for a gate-style start.

TRUE-SPOKE WHEELS

Before Losi introduced the Promoto platform, no other manufacturers had been able to create proper-looking spoked wheels with the durability needed for an RC bike. It took the determination and expertise of the Losi product development team to make it happen. For the Promoto-SM, the realistic, true-spoke wheels are smaller, in keeping with the design of real on-road motorcycles.

PLASTICS WITH GRAPHICS

Big or small, no street bike would look right without a proper body panel kit wrapped in vinyl graphics. The Promoto-SM has all the goods - fenders, number plate, fork guards, front and rear side panels - all looking fresh wrapped in updated, highly durable vinyl graphics.

REALISTIC DETAILS

Even tiny touches matter, and Losi hasn't overlooked a thing - exhaust, brake line, foot pegs, brake rotors, you name it. The Promoto-SM also includes hand guards, recreating those used on full-size supermoto bikes to protect the brake and clutch levers during a fall.

REAR FENDER

Wheelies happen. A normal, rigid-mounted rear fender would really take a beating. But the Promoto-SM has the solution - a hinged elastomer sprung rear fender that can deflect out of the way during wheelies to expose a durable nylon rear bumper. It substantially increases the durability of the rear fender.

FRONT CRASH STRUCTURE

The front crash structure of the Promoto-SM is rigid during normal running, but compresses until the front tyre bottoms into the chassis frame to absorb front impacts. That protects the front fork tubes from bending, keeping them safe and true.

SKID PLATES & AIR VENTS

Molded composite skid plates line the front and bottom of the Promoto-SM chassis. They offer protection during crashes and keep debris out of the chassis, helping to protect the electronics mounted inside. The air vents on each side of the bike come closed in the box, but can be opened to provide cooling airflow when ambient temperatures are high.

TWIN ALUMINIUM PLATE CHASSIS

Twin aluminium chassis plates house and protect all of the bike's electronics and help to give the Promoto-SM its realistically narrow appearance. They also give the frame the rigidity and durability required for harsh impacts.

FRONT FORK

The front fork of the Promoto-SM is another Losi innovation with an internal spring and dampener. Designed to work similar to normal RC shocks, the front fork tubes can be rebuilt and tuned by changing the silicone dampening fluid. Using counter-wound upper and lower springs, spacers can be used to adjust the ride height of the Promoto-SM as well. And maybe most importantly, they look awesome - just like the real deal.

RISING RATE REAR SUSPENSION

Just like a real bike, the Promoto-SM has a rising rate rear suspension. The suspension starts soft around ride height, for smooth handling and a superior grip. It becomes firmer as it gets deeper into up travel, to provide proper preload on jumps and prevent bottoming out in landings. Dialed in with a full oil-filled coil-over shock, the Promoto-SM is ready to rip over any on-road surface.

BRUSHLESS POWER SYSTEM

The Promoto-SM comes out of the gates HOT with a powerful Spektrum Smart brushless power system. Its 4-pole 3652 3800Kv motor puts down the power while the 85A brushless ESC adds all the control you need. With massive 40+ mph top speeds on a 2S LiPo battery, the Promoto-SM power system rips!

HEAD ANGLE

After months of testing different trail settings, head angle, and steering ratios, the Promoto-SM product development team found the sweet spot. A head tube angle of 62.4 degrees gives it the best balance of bump handling, landing jumps, steering input, and "head shake" control on all surfaces.

RACE-INSPIRED SLIPPER CLUTCH

As its 3800Kv Spektrum Firma Brushless motor puts out abundant power, the Promoto-SM's race inspired dual disc slipper clutch helps the rear tyre maintain traction on a variety of surfaces. The dual pad, spring pressurized slipper clutch takes inspiration from those that the TLR team uses to win races across the globe. It increases traction and protects the drivetrain without sacrificing explosive drive.

FRONT CABLE-DRIVEN DISC BRAKE

Hauling on your bike is a lot more fun when you've got good brakes. The motor can handle rear braking through the drivetrain, but like 1:1 motorcycles, most of the braking happens with the front tyre. To slow the Promoto-SM down from the front, the front brake uses a steel rotor, caliper-actuated brake pads, and servo-driven cable. It cuts your stopping distance in half.

REALISTIC CHAIN DRIVE

We could not call the Promoto-SM a true street racing bike if wasn't chain driven. Steel links and 70 roller pins wrap around a 10-tooth steel drive sprocket and a 36-tooth aluminium hub sprocket. Regardless of conditions, the chain drive will drive the rear tyre efficiently and reliably.

READY-TO-RUN

The Losi Promoto-SM comes fully assembled, with a high-quality Spektrum Smart radio system included and on-board electronics already installed. Even AA transmitter batteries are supplied! Just add a 2S LiPo battery with IC5 plug and a compatible charger and you're ready to ride.

REALISTIC SCALE DETAILS

From the body lines to the stance to sponsor placement, every detail is designed to reflect real GT3 IMSA race cars. The proportions are dialed, the presence is authentic, and the overall look commands attention on track or on display — endurance-racing excitement in a form that’s both collectible and capable.

CLIPLESS BODY RETENTION SYSTEM

Hidden clipless latches lock the body down securely while keeping the exterior clean and scale-accurate, with nothing to break up the smooth look of a full-scale race car. Access is fast and tool-free, so maintenance and battery swaps take seconds.

RACE READY

The box includes the vehicle, transmitter, rechargeable battery, charger, and even AA batteries, so there’s no extra shopping and no guesswork. Charge the battery and you’re on the track in minutes.

SMART FIT BATTERY TRAY

This all-new design changes how quickly and cleanly you can get powered up. The one-handed clip-in system gets rid of loose wires and awkward connections, while the vehicle-side plug holder keeps everything in position and ready to connect. It’s a faster, cleaner setup that gets you back on track in seconds.

AUTHENTIC MICHELIN TYRES AND LICENSED RACE WHEELS

Officially licensed Michelin Pilot Sport Pro GT H1+ tyres complete the look with true-to-scale sidewall detail and race-inspired styling, giving both cars a planted, track-ready stance that mirrors full-scale GT3 machines. Both the Corvette and Mustang feature licensed premium race wheels with scale-accurate design and premium detailing.

HARD-MOUNTED ESC WITH BIND PORT

The ESC has a built-in bind port and transponder connection, which simplifies setup and race-day prep. Adding a transponder is quick and clean with no extra wiring clutter, so the car is track-ready right out of the box. And with the ESC hard-mounted to the chassis, you get improved durability and a cleaner overall layout.

HOBBY-GRADE, FULLY SERVICEABLE

Built to be driven hard, maintained easily, and upgraded over time, this is a true hobby-grade platform from the ground up. Every component is serviceable with full parts support, giving you the confidence to repair, tune, and evolve your setup. It’s a long-term platform built to grow with your skill level.

BUILT ON THE LOSI GROM PLATFORM

Both cars are engineered on the proven Losi GROM 1/12-scale chassis for precision handling in a compact footprint. It brings real race-car handling to small-scale driving, making it perfect for tight indoor layouts and outdoor pavement runs. You get big performance and authentic race feel without needing a full-size track.

ADJUSTABLE SUSPENSION AND PRECISION STEERING

Independent suspension paired with oil-filled shocks delivers smooth, controlled handling across a variety of surfaces, while the servo-driven steering system provides accurate input and consistent response in every corner. With tuning capability built in, you can dial in performance just like a full-scale race setup.

POWERFUL BRUSHED MOTOR SYSTEM

The high-performance brushed motor delivers smooth, consistent power that’s easy to control and efficient over long run times. It’s perfectly suited for spec racing and club environments where balance and reliability matter most, keeping you competitive without sacrificing drivability.

SPEKTRUM SLT 2.4GHz RADIO SYSTEM

The included Spektrum SLT 2.4GHz radio system provides precise, interference-free control every time you pull the trigger. Steering feels responsive, throttle input is predictable, and a rock-solid connection keeps you focused on driving, lap after lap.

OPTIONAL PERFORMANCE UPGRADES

Fully compatible with Losi and Spektrum upgrade components, this platform is built to evolve. Whether you’re chasing speed, refining handling, or customizing the look, the parts are already out there, so your GT3 race car can grow from a Ready-to-Race package into a fully personalized performance machine as your skills progress.

REALISTIC SCALE DETAILS

From the body lines to the stance to sponsor placement, every detail is designed to reflect real GT3 IMSA race cars. The proportions are dialed, the presence is authentic, and the overall look commands attention on track or on display — endurance-racing excitement in a form that’s both collectible and capable.

CLIPLESS BODY RETENTION SYSTEM

Hidden clipless latches lock the body down securely while keeping the exterior clean and scale-accurate, with nothing to break up the smooth look of a full-scale race car. Access is fast and tool-free, so maintenance and battery swaps take seconds.

RACE READY

The box includes the vehicle, transmitter, rechargeable battery, charger, and even AA batteries, so there’s no extra shopping and no guesswork. Charge the battery and you’re on the track in minutes.

SMART FIT BATTERY TRAY

This all-new design changes how quickly and cleanly you can get powered up. The one-handed clip-in system gets rid of loose wires and awkward connections, while the vehicle-side plug holder keeps everything in position and ready to connect. It’s a faster, cleaner setup that gets you back on track in seconds.

AUTHENTIC MICHELIN TYRES AND LICENSED RACE WHEELS

Officially licensed Michelin Pilot Sport Pro GT H1+ tyres complete the look with true-to-scale sidewall detail and race-inspired styling, giving both cars a planted, track-ready stance that mirrors full-scale GT3 machines. Both the Corvette and Mustang feature licensed premium race wheels with scale-accurate design and premium detailing.

HARD-MOUNTED ESC WITH BIND PORT

The ESC has a built-in bind port and transponder connection, which simplifies setup and race-day prep. Adding a transponder is quick and clean with no extra wiring clutter, so the car is track-ready right out of the box. And with the ESC hard-mounted to the chassis, you get improved durability and a cleaner overall layout.

HOBBY-GRADE, FULLY SERVICEABLE

Built to be driven hard, maintained easily, and upgraded over time, this is a true hobby-grade platform from the ground up. Every component is serviceable with full parts support, giving you the confidence to repair, tune, and evolve your setup. It’s a long-term platform built to grow with your skill level.

BUILT ON THE LOSI GROM PLATFORM

Both cars are engineered on the proven Losi GROM 1/12-scale chassis for precision handling in a compact footprint. It brings real race-car handling to small-scale driving, making it perfect for tight indoor layouts and outdoor pavement runs. You get big performance and authentic race feel without needing a full-size track.

ADJUSTABLE SUSPENSION AND PRECISION STEERING

Independent suspension paired with oil-filled shocks delivers smooth, controlled handling across a variety of surfaces, while the servo-driven steering system provides accurate input and consistent response in every corner. With tuning capability built in, you can dial in performance just like a full-scale race setup.

POWERFUL BRUSHED MOTOR SYSTEM

The high-performance brushed motor delivers smooth, consistent power that’s easy to control and efficient over long run times. It’s perfectly suited for spec racing and club environments where balance and reliability matter most, keeping you competitive without sacrificing drivability.

SPEKTRUM SLT 2.4GHz RADIO SYSTEM

The included Spektrum SLT 2.4GHz radio system provides precise, interference-free control every time you pull the trigger. Steering feels responsive, throttle input is predictable, and a rock-solid connection keeps you focused on driving, lap after lap.

OPTIONAL PERFORMANCE UPGRADES

Fully compatible with Losi and Spektrum upgrade components, this platform is built to evolve. Whether you’re chasing speed, refining handling, or customizing the look, the parts are already out there, so your GT3 race car can grow from a Ready-to-Race package into a fully personalized performance machine as your skills progress.

OIL-FILLED SHOCKS

Losi has taken micros to the next level with the Micro-T stadium truck. For example, it includes oil-filled shocks for optimal handling and jumping during racing. The shocks can be tuned with optional shock fluid and springs, and adjusted using the included pre-load clips.

BLACK-ANODIZED ALUMINIUM CHASSIS

Inspired by a championship-winning TLR racing buggy, the Micro-T stadium truck's next-level, black-anodized aluminium chassis includes front caster kick and side bends to create a strong and rigid foundation.

13+ MPH WITH ROOKIE MODE

This stadium truck's 13+ mph top speed is outrageous for a vehicle of its size! But a throttle limiting switch on the back of its included SLT2 transmitter lets you put the Micro-T in "rookie mode," limiting the speed to 50% or 75% of its full capability - ideal for safely learning RC driving skills. It also lets you confidently share the fun with young, inexperienced drivers, knowing they'll be able to stay in control.

SPEKTRUM SLT2 2.4GHz RADIO

Race with an unlimited number of other drivers and never worry about signal conflicts, thanks to the interference-resistant 2.4GHz technology of the Spektrum SLT2 radio. Adjustments on the transmitter let you fine-tune steering control to suit your individual racing style.

FULLY PROPORTIONAL ELECTRONICS

The Micro-T stadium truck's included electronics provide fully proportional control, so that your slightest input on the transmitter is immediately reflected in the speed and steering. That responsiveness keeps you in complete control on the track.

FULLY READY-TO-RUN

Everything you need to race is included in the box along with your fully assembled and finished Micro-T stadium truck. No additional purchases are required. Just read the manual as you charge the battery and you'll be ready to go in less than an hour.

BATTERY & CHARGER INCLUDED

You'll get 25+ minutes of run time on a full charge of the included 350mAh LiPo battery - compared to the eight minutes provided by the batteries that come with most RTR models. And instead of waiting for 2-5 hours to recharge the battery with a standard charger, you'll have it fully charged in less than an hour using the included .5 amp USB-C charger!

PRO-LINE RACING OE (ORIGINAL EQUIPMENT) COMPONENTS

The included Pro-Line Racing body, wheels and tyres are exact same design found on racetracks around the world - another example of what makes the Losi Micro-T one of the best micro RC stadium trucks available!

MICRO-T OPTION PARTS

Competing, customizing, upgrading - you can do it all, RC style, with the Losi Micro-T. A full line of option parts is available for making this racing buggy all your own.

OIL-FILLED SHOCKS

Losi has taken micros to the next level with the Micro-T stadium truck. For example, it includes oil-filled shocks for optimal handling and jumping during racing. The shocks can be tuned with optional shock fluid and springs, and adjusted using the included pre-load clips.

BLACK-ANODIZED ALUMINIUM CHASSIS

Inspired by a championship-winning TLR racing buggy, the Micro-T stadium truck's next-level, black-anodized aluminium chassis includes front caster kick and side bends to create a strong and rigid foundation.

13+ MPH WITH ROOKIE MODE

This stadium truck's 13+ mph top speed is outrageous for a vehicle of its size! But a throttle limiting switch on the back of its included SLT2 transmitter lets you put the Micro-T in "rookie mode," limiting the speed to 50% or 75% of its full capability - ideal for safely learning RC driving skills. It also lets you confidently share the fun with young, inexperienced drivers, knowing they'll be able to stay in control.

SPEKTRUM SLT2 2.4GHz RADIO

Race with an unlimited number of other drivers and never worry about signal conflicts, thanks to the interference-resistant 2.4GHz technology of the Spektrum SLT2 radio. Adjustments on the transmitter let you fine-tune steering control to suit your individual racing style.

FULLY PROPORTIONAL ELECTRONICS

The Micro-T stadium truck's included electronics provide fully proportional control, so that your slightest input on the transmitter is immediately reflected in the speed and steering. That responsiveness keeps you in complete control on the track.

FULLY READY-TO-RUN

Everything you need to race is included in the box along with your fully assembled and finished Micro-T stadium truck. No additional purchases are required. Just read the manual as you charge the battery and you'll be ready to go in less than an hour.

BATTERY & CHARGER INCLUDED

You'll get 25+ minutes of run time on a full charge of the included 350mAh LiPo battery - compared to the eight minutes provided by the batteries that come with most RTR models. And instead of waiting for 2-5 hours to recharge the battery with a standard charger, you'll have it fully charged in less than an hour using the included .5 amp USB-C charger!

PRO-LINE RACING OE (ORIGINAL EQUIPMENT) COMPONENTS

The included Pro-Line Racing body, wheels and tyres are exact same design found on racetracks around the world - another example of what makes the Losi Micro-T one of the best micro RC stadium trucks available!

MICRO-T OPTION PARTS

Competing, customizing, upgrading - you can do it all, RC style, with the Losi Micro-T. A full line of option parts is available for making this racing buggy all your own.

5IVE-T DNA

The Losi 5IVE-TG 3.0 is based on the DNA of the renowned 1/5-scale petrol-powered 5IVE-T, which has become a benchmark in the large-scale RC community. Its design and engineering DNA are rooted in the company's successful 1/8-scale and short course platforms. The 5IVE-T 3.0 builds on this legendary heritage with significant upgrades while staying true to what made the original an icon.

Fujiwara FJ350RC 35.2cc Engine

The new Fujiwara FJ350RC Engine is the heart and soul of the 5IVE-T 3.0. Based on the legendary Zenoah G320, it features a larger bore that increases displacement to 35.2cc. Torque and power numbers are increased across the board, but the engine really shines in the low and midrange, showing the most significant gains. This powerplant delivers the thrilling petrol performance that 5IVE-T enthusiast's demand.

1/5-Scale Metal Top High Torque 15T Servo

Designed to handle extreme stress with superior performance in mind, the new SPMSS1000MT metal top servo keeps the 5IVE-TG 3.0 pointed in the right direction. The 1000 oz/in high torque metal top servo is more than just your standard large-scale servo. The metal top case not only helps keep all the gears aligned but also acts as a heat sink, drawing heat away from the servo motor to enhance performance and durability.

Ultra Durable Injection-Moulded Body Panels

The Losi 5IVE-TG 3.0's massive size and power mean that the body shell takes a serious beating during aggressive driving and rollovers. The new injection-moulded body panels flex and absorb impacts, making them highly durable. The injection-moulded bodies also maintain a uniform thickness, increasing their strength by eliminating thin spots that can occur in a vacuum forming process.

New Massive 32mm Big Bore Shocks

The 32mm Big Bore Shocks have a larger diameter than the original 5IVE-T shocks, allowing for more oil volume and improved damping. The new, larger Big Bore shocks increase the fluid volume by an incredible 78% over the original 5IVE-T shocks. The tapered piston design helps to increase the pack while creating a more controlled, faster rebound for improved overall traction.

Easy Access Center Diff Mount

A new easy-access centre diff mount simplifies the removal and maintenance of the centre diff. The new design allows access to the centre diff by unbolting and removing the top plate assembly while keeping the brakes and linkage intact.

Officially Licensed KMC KM549 Wheels

KMC is a globally recognized brand known for its stylish and rugged off-road wheels. Their innovative designs aim to be both visually appealing and highly functional. The 5IVE-TG 3.0 features officially licensed KMC KM549 Wheels with Pro-Line Pro-Loc technology.

New Pro-Line Mirage TT Tyres

Highly detailed scale Pro-Line Mirage TT tyre in a new, larger 8.5" size. The design utilizes proprietary Pro-Line Pro-Loc bead technology for secure tyre mounting.

New Suspension Arms

New front and rear suspension arms feature added material around the lower shock mounting locations, providing uniform arm thickness for improved durability. Adjustments to the shock geometry correct the shock angles from the tower to the arm with the new, larger 32mm Big-Bore shocks.

Optimized Gearing for Larger Size

Optimizing gearing on the 5IVE-TG 3.0 was a crucial part of the development process. The right gear ratio can significantly transform how the truck accelerates and performs, particularly when increasing the overall size of the truck and its tyres. The 5IVE-TG 3.0 now comes with a new 43/12 ring and pinion gear, and 67T spur to get this beast of a truck moving.

Spektrum DX3 Smart 3-Channel Transmitter

The included Spektrum DX3 2.4GHz transmitter provides reliable control with advanced features. Using a Smart battery for the receiver pack, you can monitor the available capacity on the transmitter's Smart battery level indicator, ensuring you always know when it's time to recharge.

Spektrum SR615 DSMR Receiver

The Spektrum SR615 DSMR receiver delivers reliable control and works seamlessly with the included DX3 transmitter. When paired with Smart batteries, it provides real-time telemetry data directly to the transmitter display.

1/5-Scale Metal Top Hi Torque 15T Servo

Designed to handle extreme stress with superior performance in mind, the new SPMSS1000MT metal top servo is keeping the 5IVE-TE pointed in the right direction. The 1000 oz/in hi torque metal top servo is more than just your standard large-scale servo. The metal top case not only helps keep all the gears aligned but also acts as a heat sink, drawing heat away from the servo motor to enhance performance and durability.

Spektrum Firma 12S 250A Brushless Smart ESC

This new 12S 250A ESC is the highest-powered offering to date from the Spektrum Firma lineup of ESCs. This ESC is designed for large-scale, high-power applications featuring Spektrum's SMART Technology.

Spektrum Firma 560kv 70120 Brushless Motor

The Spektrum Firma 560kv 70120 motor is a high-power, large-scale sensorless brushless motor. The 70mm diameter and 120mm length is the largest motor Losi has ever put into a surface vehicle. This 12S-capable motor is intended for serious, high-performance applications like the 5IVE-TE 3.0.

Dual Losi 50mm Cooling Fans and Heatsink

50.4 volts of power means cooling is essential! The motor is encapsulated by an aluminium heat sink that mounts two high-volume fans to ensure the motor temperature stays in the optimum range.

Spektrum SR6200A DSMR 6-Channel AVC Surface Receiver

Built around frequency-agile DSMR technology, the Spektrum SR6200A 6-channel DSMR receiver delivers superb range and response along with unbeatable signal security in a compact, easy-to-install package. AVC (Active Vehicle Control) technology increases your stability on tough terrain. Compatible with innovative Smart Technology, the SR6200A receiver also provides real-time telemetry data when used with a Smart ESC and Smart battery.

Spektrum DX3 Smart 3-Channel Transmitter

The throttle limiting function on the included Spektrum DX3 2.4GHz transmitter allows novice users to limit the truck's top speed to 50% or 75% of its full potential until they're ready to unleash its full potential. Using a Smart battery, you can monitor the available capacity on the transmitter's Smart battery level indicator.

Ultra Durable Injection-Moulded Body Panels

The Losi 5IVE-TE 3.0's massive size and power mean that the body shell takes a serious beating during aggressive driving and rollovers. The new injection-moulded body panels flex and absorb impacts, making them highly durable. The injection-moulded bodies also maintain a uniform thickness, increasing their strength by eliminating thin spots that can occur in a vacuum forming process.

Straightened Centre Drivetrain

The 5IVE-TE 3.0 has an all-new, straightened centre drivetrain to optimize strength and efficiency. The straightened drivetrain is a proven design that eliminates compound angles within the drivetrain, significantly improving driveshaft durability.

New Massive 32mm Big Bore Shocks

The 32mm Big Bore Shocks have a larger diameter than the original 5IVE-T shocks, allowing for more oil volume and improved damping. The new, larger Big Bore shocks increase the fluid volume by an incredible 78% over the original 5IVE-T shocks. The tapered piston design helps to increase the pack while creating a more controlled, faster rebound for improved overall traction.

Easy Access Centre Diff Mount

A new easy-access centre diff mount simplifies the removal and maintenance of the centre differential. The new design allows access to the centre differential by unbloting 6 screws and removing the top plate assembly.

Officially Licensed KMC KM549 Wheels

KMC is a globally recognized brand known for its stylish and rugged off-road wheels. Their innovative designs aim to be both visually appealing and highly functional. The 5IVE-TE 3.0 features officially licensed KMC KM549 Wheels with Pro-Line Pro-Loc technology.

New Suspension Arms

New front and rear suspension arms feature added material around the lower shock mounting locations, providing uniform arm thickness for improved durability. Adjustments to the shock geometry correct the shock angles from the tower to the arm with the new, larger 32mm Big-Bore shocks.

Optimized Gearing for Larger Size

Optimizing gearing on the 5IVE-TE 3.0 was a crucial part of the development process. The right gear ratio can significantly transform how the truck accelerates and performs, particularly when increasing the overall size of the truck and its tyres. The 5IVE-TE 3.0 now comes with a new 43/12 ring and pinion gear, and 67t spur to get this beast of a truck moving.

New Pro-Line Mirage TT Tyres

Highly detailed scale Pro-Line Mirage TT tyre in a new, larger 8.5" size. The design utilizes proprietary Pro-Line Pro-Loc bead technology for secure tyre mounting.

OVERBUILT ELECTRONICS INSTALLED

For incredible top speed and torque, the LMT 2.0 features a 2S to 4S capable power system with a Spektrum 3668 2800Kv brushless motor and Spektrum 130A ESC. Using a 4S LiPo battery, it can deliver speeds of 45+ mph. To help you manage all of that muscle, the metal top, steel gear, 25T Spektrum S680 high torque steering servo is equipped with an innovative, dual step, helical design servo saver. It improves holding power while giving the steering a precise, accurate feel.

FREESTYLE MODE

The LMT 2.0's transmitter-activated Freestyle mode is a first for any RC monster truck, made possible by Spektrum DRIVE Technology. In this mode, the electronics allow you to hold longer wheelies, balance for a stoppie, and even "bicycle" on two wheels - just like full-size Monster Jam^™ trucks do during their skills challenge and freestyle runs.

SPEKTRUM DX3 SMART TRANSMITTER

The Spektrum DX3 Smart 2.4GHz transmitter included with the Losi LMT 2.0 offers many advanced features to meet the needs of first-time and experienced RC drivers. Using its throttle limiting function, novice racers can limit top speed to 50% or 75% of the monster truck's full potential until they have the confidence to unleash it all. Special trim knob assignments allow you to fine tune your truck while in freestyle mode.

SMART BATTERY VOLTAGE INDICATOR

You'll never have to wonder if your Losi LMT 2.0 monster truck's on-board battery needs a recharge. The Spektrum DX3 transmitter's battery voltage indicator shows you the charge level of your Smart battery in real time with just a glance. Once the battery level gets low, an alarm will also sound.

OFFICIALLY LICENSED MONSTER JAM™ BODIES

Star in your own Monster Jam^™ events with the Losi LMT 2.0! This monster truck is available with your choice of two factory-finished scale bodies - Grave Digger (LOS04028T1) or Son-uva Digger (LOS04028T2). Each is highly detailed and officially licensed by Monster Jam^™ and Feld Motorsports.

OFFICIALLY LICENSED BKT TYRES

The LMT 2.0 now includes officially licensed BKT tyres with a chevron tread pattern that's more scale but less aggressive, resulting in better handling on a greater variety of surfaces. The tyres include sidewall and logo details to match the BKT tyres used on real monster trucks.

WIDER & LONGER FOOTPRINT

With 2.6" wheels featuring a wider offset plus slightly taller tyres and longer 4-link bars, the LMT 2.0 has a larger overall size and footprint compared to the previous LMT monster truck platform. It's more scale and more dominating! The wheel has a replica beadlock that you can remove or paint to customize the look of your truck.

IT'S ALL IN THE DETAILS

Many scale details are included to give the officially licensed monster truck bodies a true scale look. The exhaust headers, LED headlights, a driver figure, and authentic lower chassis sponsor panels all make it easy to imagine you're driving the real truck.

ALUMINIUM CHASSIS

The Losi LMT 2.0 utilizes a 6061-T6 aluminium twin vertical chassis plate design for extreme strength and durability. The chassis plates are powder-coated in green for the Grave Digger and blue for the Son-uva Digger.

WHEELIE BUMP

The wheelie bump included with the Losi LMT 2.0 improves the realistic scale appearance while still functioning as a wheelie bar. The cross bar also includes provisions for a flag mount.

TWO-PIECE SOLID FRONT & REAR AXLE HOUSING

The solid front and rear axle housing of the LMT 2.0 has been redesigned with a stronger, 2-piece design. The lower 4-link mounts now have wider spacing and more material for increased strength and security. The third member has also been updated to accept the larger 6x15x5mm pinion bearings for better support and durability.

1/8 SCALE DIFFERENTIALS

The new HD differentials improve strength and durability with the addition of cross-pin blocks and a larger cup for increased fluid capacity. All three HD differentials come filled with 1 million weight diff fluid.

COMPOSITE FLIP-TOP CAGE

Significant improvements have been made to how the LMT 2.0's flip-top cage mounts to the chassis. The cage now flips forward, making it easier to change the battery and maintain your monster truck. To secure the cage back into place, you simply flip the cage back down and lock it to the chassis.

CENTER DIFFERENTIAL WITH CUSH DRIVE

The fluid-filled centre diff allows for tuning with the added protection of torque-dampening Cush Drive. The rubber elastomer Cush Drive system absorbs high impact forces from the motor and from hard landings to increase drivetrain durability and reliability.

ELASTOMER BATTERY MOUNTING

The LMT 2.0 comes equipped with the popular Losi Elastomer Battery Mounting System for a versatile battery hold down method.