BELAIR Electric Scale RC Planes

With a wingspan of 38 inches, the design is traditional all wood construction and modern CAD design features.

A full size multi-sheet plan is included and the laser cut parts set includes all the balsa and plywood parts required to build the basic airframe, such as fuselage sides with spar slots and wing position holes laser cut for accuracy, formers, bulkheads, cowl components, wing ribs, shaped spars, tip shapes, trailing edges plus many smaller items.

Scale 1.093" to 1ft, 38 inch wingspan for 480 size electric brushless motors and 2 cell LiPo batteries. Aileron control, plus rudder, elevator and motor.

Note: This model requires all electronics, covering and details to finish.

The Sopwith Tabloid was a British biplane, originally designed as sports aircraft and later adapted for military use. They were among the first types to be built by the Sopwith Aviation Company. The "Tabloid", so named because of its small size, caused a sensation when it made its first public appearance.

Single-seat variants of the Tabloid went into production in 1914 and 36 eventually entered service with the Royal Flying Corps and Royal Naval Air Service (RNAS). Deployed to France at the outbreak of the First World War, Tabloids were used as fast scouts.

The Peter Rake design is fully CAD drawn with a detailed plan set and laser cut parts in balsa and plywood. It suits 400 size brushless motors and rudder, elevator and ESC for motor.

Note: This model requires all electronics, covering and details to finish.

The SPAD XIII proved to be the most successful French fighter aircraft of WW1. Well-armed, extremely tough and a match for most German types it provided the mount of choice for many French, Italian and American aces.

Our SPAD is designed by renowned scale designer, Peter Rake and features clear CAD plans and intricate laser cut parts.

A full size multi-sheet plan is included and the laser cut parts set includes all the balsa and plywood parts required to build the basic airframe, such as fuselage sides with spar slots and wing position holes laser cut for accuracy, formers, bulkheads, cowl components, wing ribs, shaped spars, tip shapes, trailing edges, struts plus many smaller items, including scale control horns, tail skid, wheel cores. Build instructions included.

Note: This model requires all electronics, covering and details to finish.

This Peter Rake designed electric scale aircraft is the Sopwith Pup WWI. Modelled at 1.33" scale (approximate 1/9th scale), the model suits affordable 480 size brushless motor setups.

All shaped parts are included, such as fuselage sides, bulkheads, formers, wing ribs, wing tip shapes and trailing edge, interplane struts, scale control horns in ply, cowl components, form to laminated fin and rudder, wheel blanks plus many smaller items. A 3 sheet full size plan is included.

Sopwith Pup for 4 channel mini radio - ESC Motor, Rudder, Elevator and Ailerons. Wingspan 36 inches for 480 size brushless motors.

Note: This model requires all electronics, covering and details to finish.

The Sopwith Triplane was a British single seat fighter aircraft designed and manufactured by the Sopwith Aviation Company during the First World War. It was the first military triplane to see operational service.

It has a top speed of 115mph and a range of 300 miles. The Triplane's combat debut was highly successful. The new fighter's exceptional rate of climb and high service ceiling gave it a marked advantage over the Albatros D.III.

The Peter Rake designed Sopwith Triplane suits 400 size motors and is of all wood construction.

Note: This model requires all electronics, covering and details to finish.

Together with the Camel, the SE5 was instrumental in regaining allied air superiority in mid-1917 and maintaining it for the rest of the war.

Many of the top Allied aces flew this fighter, including Billy Bishop, Edward Mannock and James McCudden. Legendary British ace Albert Ball was initially disparaging of the SE5, but in the end claimed 11 of his 44 victories flying it. McCudden wrote of the SE5 "It was very fine to be in a machine that was faster than the Huns, and to know that one could run away just as things got too hot."

Note: This model requires all electronics, covering and details to finish.

Parts set and plan for the original 20's American homebuilt - Pietenpol Air Camper.

This model is traditional all wood construction and features a multi sheet plan and accurate laser cut parts. Formers, fuselage sides, wing ribs, trailing edges, landing gear mounts, cowl parts plus many smaller parts are included.

45 inch span for 400 size brushless setups. 4 channel control - ESC, rudder, elevator and ailerons. Scale 1.5":1ft

Note: This model requires all electronics, covering and details to finish.

The Nieuport 11, nicknamed the Bébé, was a French World War I single seat sesquiplane fighter aircraft, designed by Gustave Delage.

It was the primary aircraft that ended the Eindekker's "Fokker Scourge" in 1916.

Designed for 40 watt electric motors, the Nieuport 11 features a full CAD plan with constructional details, and intricate laser cut parts in graded balsa and plywood.

Nieuport 11 - 25" span for 40W outrunners and 3 channel radio (Motor, Rudder & Elevator) A build manual is also included along with a bill of materials.

Note: This model requires all electronics, covering and details to finish.

With a wingspan of 37 inches, the design features traditional all wood construction. A worthy opponent to our Fokker DVIII!

A full size multi-sheet plan is included and the laser cut parts set includes all the balsa and plywood parts required to build the basic airframe, such as fuselage sides, formers, bulkheads, cowl components, wing ribs, shaped spars, tip shapes, trailing edge, plus many smaller items.

Scale 1.494" to 1ft, 37 inch wingspan for 400 size electric brushless motors and 2 cell LiPo batteries. Aileron control, plus rudder, elevator and motor.

Note: This model requires all electronics, covering and details to finish.

The latest design in the Belair range of small electric scale models. Parts Set for the Peter Rake Martinsyde Elephant.

The Martinsyde "Elephant" G100, a single-seat fighting scout, was large and unwieldy - hence one explanation for the nickname "elephant". Originally introduced as a long range fighting scout it proved unsuitable in this role and from 1 July 1916 it was used predominantly for bombing duties.

Our Parts Set includes full size 3 sheet detailed construction plans, plus laser cut parts, including fuselage sides, bulkheads, formers, wing ribs, tip shapes, scale control horns, wing tip scale outlines, fin/rudder and tailplane parts, wheel cores, plus many smaller items.

Scale 1:1.325, wingspan 50.35 inches. All wood construction, for 400 size brushless motor setups and 3 cell LiPo. 4 channel - ESC, Rudder, Elevator and Ailerons

Note: This model requires all electronics, covering and details to finish.

Bristol M1C Another iconic model from WW1 designed for Belair by Peter Rake. Modelled at 1.5":1', this 46 inch model suits 480 size brushless (150w) setups.

The Belair Parts set is full of intricate laser cut parts in balsa and plywood, including fuselage parts, bulkhead, formers, cowl parts, wing ribs, shaped trailing edges with rib slots cut, tail parts, servo plates, tail skid, fuselage crutch parts.

46 inch span (1.5":1' scale) all wood construction for 150 watt electric setups. 4 channel radio systems - ESC, Ailerons, rudder and elevator.

Note: This model requires all electronics, covering and details to finish.

Modelled at 1.53":1ft or 36 inch span, the model is all wood and suits brushless 480 (150 watt) motors and small servos.

Designed by Peter Rake exclusively for Belair, the model is fully CAD designed and features laser cut parts. Construction is straightforward and features modern methods.

Includes balsa, plywood and basswood parts for fuselage sides, formers, bulkheads, wing ribs, trailing edges with rib slots cut, outlines for all flying surfaces, interplane struts, tail skid, fuselage crutch, tail skid, plus smaller handy parts.

Note: This model requires all electronics, covering and details to finish.

The Fokker D.VII was a German World War I fighter aircraft designed by Reinhold Platz of the Fokker-Flugzeugwerke. Germany produced around 3,300 D.VII aircraft in the second half of 1918.

The D.VII quickly proved itself to be a formidable aircraft.

Our Fokker DVII is modelled at Wingspan 38" span and a scale of 1.3"=1ft. It is suitable for 400 size brushless motors and the kit includes laser cut parts in balsa and plywood plus a multi sheet plan.

Note: This model requires all electronics, covering and details to finish.

The Fokker Eindecker fighters were a series of German World War I monoplane single-seat fighter aircraft. Developed in April 1915, the first Eindecker ("Monoplane") was the first aircraft to be fitted with a synchronization gear, enabling the pilot to fire a machine gun through the arc of the propeller without striking the blades. The Eindecker gave the German Air Service a degree of air superiority from July 1915 until early 1916.

Designed for 40 watt electric motors, the Fokker Eindekker features a full CAD plan with constructional annotation, intricate laser cut parts in graded balsa and plywood.

Note: This model requires all electronics, covering and details to finish.

Note: This model requires all electronics, covering and details to finish.

Traditional all wood model of the British WW1 single seat biplane fighter aircraft introduced on the Western Front in 1917.

The Camel is designed for lightweight radio and 400 size electric motors. Includes laser cut parts set and full size plan.

Note: This model requires all electronics, covering and details to finish.

From the Golden Era of flight, comes the elegant Bellanca Skyrocket. With a wingspan of 42 inches, the design is traditional all wood construction and modern CAD design features.

A full size multi-sheet plan is included and the laser cut parts set includes all the balsa and plywood parts required to build the basic airframe, such as fuselage sides with spar slots and wing position holes laser cut for accuracy, formers, bulkheads, cowl components, wing ribs, shaped spars, tip shapes, trailing edges, struts plus many smaller items.

Note: This model requires all electronics, covering and details to finish.

The Royal Aircraft Factory B.E.2e was a British single-engine two-seat biplane in service with the Royal Flying Corps (RFC) from 1912 until the end of World War I.

About 3,500 were built. Initially used as front-line reconnaissance aircraft and light bombers; variants of the type were also used as night fighters.

The Peter Rake design is fully CAD drawn with a detailed plan set and laser cut parts in balsa and plywood.

Suits 400 size brushless motors and rudder, elevator and ESC for motor. Plan and parts set include details for both the BE2e and Be12a.

Note: This model requires all electronics, covering and details to finish.

The Verville Air Coach was a four passenger, high-wing monoplane designed in 1927 by Alfred V. Verville and produced by his company, Verville Aircraft Company. It was a comfortable, good-looking cabin monoplane. The plane made its debut at the Detroit Air Show in 1929.

The Peter Rake design is fully CAD drawn with a detailed plan set and laser cut parts in balsa and plywood.

Suits 400 size brushless motors and rudder, elevator and ESC for motor.

Note: This model requires all electronics, covering and details to finish.

The Aeronca Defender is traditional all wood construction and features a multi sheet plan and accurate laser cut parts. Formers, fuselage sides, wing ribs, trailing edges, landing gear mounts, cowl parts plus many smaller parts are included.

Note: This model requires all electronics, covering and details to finish.

Our Albatros is modelled at 1.31"/1' with a wingspan of 39.3 inches. Designed by Peter Rake exclusively for Belair, the model is fully CAD designed and features laser cut parts. Construction is straightforward and features modern methods.

Includes balsa, plywood and basswood parts for fuselage sides, formers, bulkheads, wing ribs, trailing edges with rib slots cut, outlines for all flying surfaces, interplane struts, tail skid, fuselage crutch, tail skid, plus smaller handy parts. Fuselage is built on central crutch system.

Note: This model requires all electronics, covering and details to finish.

The 1 1/2 Strutter proved to be one of the multi-role workhorses of WW1 Not only a good observation aircraft but also a bomber, home defence fighter and a shipboard aircraft. That it was relatively easy to fly was an added bonus. The model is also an easy to fly floater.

A full size multi-sheet plan is included and the laser cut parts set includes all the balsa and plywood parts required to build the basic airframe, such as fuselage sides with spar slots and wing position holes laser cut for accuracy, formers, bulkheads, cowl components, wing ribs, shaped spars, tip shapes, trailing edges, struts plus many smaller items including scale control horns, tail skid and wheel cores. Build instructions included.

Note: This model requires all electronics, covering and details to finish.