All Products

This is for booking in for Thursdays Race Night only

One full days PASS and 1x Person

• For your own and others Safety, you will need to sign a waver and watch any instructions videos provided on the day. Driving beyond your ability will result in being asked to slow your speed or asked to leave with no refund. Unless BRCA registered.
• No Brushless Heavy Duty Basher Trucks (Too heavy and dangerous for our track)
• Limited to 1 Driver Per Pass Per Day - BONUS! Race 3 classes for the price of 1.
• Hire any of our Hire Vehicles and you get everything included (Do not need to buy this pass as well (Not BRCA) 

Includes

• 1 Race Pass (Per Person) (3 classes allowed to race - must have Marshal present if possible)
• Practice all day from (Store + Race Night hours allowed)
• Pit space, chairs and tables available (first come first serve)
• Charing is available
• Booking in starts from 10:00am (Will need Classes, BRCA Number & Transponders Numbers if applica or sign waiver) Racing Nights such as Thursday will start 18:00 and end 21:00 approx. Can run later if needed on race nights.
• Arriving late? Do not worry, you can join in at any time.
• Three 3 Race's on BRCA Insurance. Will need to visit BRCA website and join afterwards and present BRCA number or sign waiver.

Current Class's

1. 1/10th Touring Car (Will be split if numbers show to TT-CUP & Brushed and Brushless)
2. 1/10th Buggy (Will be split into 2WD & 4WD if numbers present)
3. 1/10th Mini (M-Chassis Scale on either FWD/RWD/4WD)
4. 1/12th Mini (Pan car typical RWD on BatCave, Mardave, Kamtec - Open)
5. 1/10th M-Chassis Rally Cross (Sections of track may alter to allow crossover)
6. 1/14th Tamiya TT01E Euro Trucks (Ran to Current Rules)
7. 1/12th LMP, GT12 and LMGT3 
8. Other Class's will run if required

You can purchase this pass now, and select 'Store Collection' - this pass will be held until the day you arrive. Available to collect from 10am on the day and will only be redeemed once collected instore/raceway. If you do not turn up, it can roll onto another week.

(**NOW INCLUDES CHARGING** limited to availability of sockets) 

Assembly required! Use shock pliers and shock pump where possible! Comes with 300cst oil.

Description:

This is a Yeah Racing newly designed damper set for 1/10 RC cars. Despite the 5 stage stiffness spring sets, Yeah racing damper set featured the state of the art technology interchangeable damper piston which gives so much serious tuner so much potential to tune their damper settings. The interchangeable piston will allow 3 settings of damper's response as well as 4 rebound rate adjustment to fit different racing situation and maximum performance.

The Yeah Racing new damper set has spent great effort on increasing the durability and maintenance ease. The damper shaft is coated with titanium for minimizing friction and longer lifespan. To cope with the need to change the damper piston from time to time, the shock gear have selected premium quality anti-leak O-Ring to keep the damper oil in place. CNC machined high grade aluminum were used to build this high end damper set for maximum durability at the minimum weight.

Rebound Core System:

The Yeah Racing Aluminum damper set comes with 6 different damper piston for fine-tuning the rebound characteristics. The set of 3 general type piston allow you to adjust 3 different rebound rate where has the same depression and compression resistant. While the "V piston" featured a v shape damper oil tunnel which allows the depression rate differ from the compression rate for more precise tuning. For instance, a rear wheel drive RC can be benefit by a stiffer rear wheel compression rate to offset the weight transfer during hard acceleration while maintaining balanced depression rate throughout the whole car.

Feature:

• For: 1/10 RC Cars
• Material: Aluminum
• Color: Blue
• CNC Machined
• Titanium Coated Damper Shafts
• Selected Anti-Leak O-Ring
• Unique Piston Design
• Rebound Core System
• Aluminum Damper Cylinder
• Easy To Refill Damper Oil
• Simple Installation

Specification:

• 50mm Hole to Hole

Include:

• • Shock-Gear (4 pcs)
  • Piston 2 Holes (4 pcs)
  • Piston 3 Holes (4 pcs)
  • Piston 4 Holes (4 pcs)
  • V Piston 2 Holes (4 pcs)
  • V Piston 3 Holes (4 pcs)
  • V Piston 4 Holes (4 pcs)
  • Spring Red (Super Soft) (4 pcs)
  • Spring Yellow (Soft) (4 pcs)
  • Spring Blue (Medium) (4 pcs)
  • Spring White (Hard) (4 pcs)
  • Spring Black (Super Hard) (4 pcs)
  • Ball End (8 pcs)
  • Ball Nut (4 pcs)
  • Shock Oil 300CST 15ml (1 pc)
  • Manual (1 pc)

New Phat Bodies M.A.D. Mini bodyshell and wing

Race inspired designed bodyshell for the popular Mardave and Battcave 1/12th Mini stock class.

160mm wide and 175mm wheelbase

Moulded in 0.7mm race weight Lexan polycarbonate for superior quality and durability.

Comes complete with pre cut vinyl window masks and light/grill stickers sheet external overspray film and 'Phat Bodies' stickers.

Bodyshell and wing come CLEAR, so will require cutting, trimming and painting to fit.
The bodyshell in the photo's has been painted to represent the finished item.

• Standard 540 can size for use in 1/10th scale or 1/12th scale vehicles.
  - Motors are designed for use with 4 cell or 6 cell Nimh packs, or 1s or 2s lipo packs.
  - Supplied with leads for easy connection in RTR cars.
  - Includes internal cooling fan.

Great replacement for Tamiya TT01 & TT02 etc

• Using 38 shore foam and adding a purple stripe to recognize the compound, mounting it on our rim black 1/12 black carbon rim the tyres perform excellently.  These tyres are suitable for high grip American style tracks and work with the most popular additives.
  43mm diameter from the box.

Now used on the BRCA 1/12th LMGT3 1/12 Class for either GT12 Atom or Eclipse LMP12

Introducing from CORE RC the New 727 Medium Side Wall Glue + 2 Nozzles.

Especially developed by Schumacher's leading drivers together with industry glue experts this CORE RC 727 Medium Side Wall Glue is primarily designed to tune car handling by using on tyre sidewalls.

Medium viscosity

Because of the medium viscosity it can not only be used for stiffening tyre sidewalls it can also be used for regular tyre gluing.  For those who prefer the slower thicker application method, which could cause less mess.

We suggest for Off Road tyre sidewall gluing to re-use the bag supplied on the end of your finger to apply a small amount to the area required.  Alternatively use a silicone thimble.

20g bottle with special non stick lid and 2 ultra fine plastic nozzles for accurate placement.

TO USE WITH SCHUMACHER SST 25MM WIDE MINIPINS TOURING CAR SIZE

Frosty Tip - After weeks of testing, and asking other pro drivers. We have found this to be the best product for the TT01E Euro Race Truck on Carpet.

SXT 3.0 was designed to provide superior performance in a minimum odour environment for both foam and rubber tyre racing. It has been engineered, tested and proven to be compatible with other additives. No worries about setup changes when switching compounds as SXT 3.0 provides the same on-track feel and performance as other additives. Another benefit we have noticed during the year is the ability to rejuvenate old foam tyres. In our tests we have taken 1 or 2 year old tyres and soaked them a couple times with SXT 3.0 and they tend to come back to "like new". Simply run them once and you have race ready tyres that you usually would have tossed away!

Carpet Foam and Rubber Tyre: Apply SXT 3.0 to clean tyres. Typically the entire rear tyres and a portion of the front tyres (starting at the inside edge) are coated, depending on traction conditions. Soak time before wiping is also dictated by traction conditions; longer soak = higher traction. Start by soaking the tyres for 15 minutes, timing it so that you wipe them 10 minutes before racing. Asphalt Foam: Apply SXT 3.0 to tires. Typically the entire rear tyres and a portion of the front tyres (starting at the inside edge) are coated, depending on traction conditions. Soak the tires for 20 to 30 minutes, timing it so that you wipe them 10 minutes before racing. Shorten soaking time if track is high bite.

Approx. 110 ml.

This is classed as a hazardous material by our shippers and consequently cannot be sent outside the UK.

• Using 38 shore foam and adding a purple stripe to recognize the compound, mounting it on our rim black 1/12 black carbon rim the tyres perform excellently.  These tyres are suitable for high grip American style tracks and work with the most popular additives.  
  43mm diameter from the box.

Now used on the BRCA 1/12th LMGT3 1/12 Class for either GT12 Atom or Eclipse LMP12

FITS ON MOST 1/10 CAR AND IS FOUND TO BE THE ONLY FAN HEATSINK UNIT TO FIT THE TAMIYA TT01E EURO TRUCK.  FIT AND TILD IT AT 120DEG FOR FITMENT.

Supastox GT12 Circuit and Oval pre glued tyres line. Contact RC has put in a great deal of development time to provide the best tyre balance and traction. With help from our drivers Ben Harding, World Champion in the Stock oval class and 2013 BRCA GT12 Champion Chris Ashton.

Contact GT12 tyres come pre glued on Bearing (B/B) and no Bearing rims (std).

01/01/2023

Now include cool looking disks are glued by the customer on the external face of the wheel to protect the foam from the high rigours of oval racing.

The disk will help prevent tyre chunking on side impacts.

They are included in all JM tyres.

FASTRAX MEDIUM FOAM PIT MAT (600x400MM, 2MM THICK)

Pimp your pit area with a Fastrax Foam Pit Mat! The tough Foam mat provides a durable work surface to help protect your pit bench. The pit mat is rounded off with a cool contrasting logo to show your allegiance in the pits!

FOR USE OF PITTING AT RC CAR CLUB AND EVENTS 

1X XT60 MALE PLUGS REQUIRED FOR CHARGE LEADS - NOT INCLUDED

Perfect Charger for a 7.2v Nicd/NiMh or 7.4V Lipo and more!

Infused with SKYs latest 'neo' technology for enhanced efficiency and power, S100neo is masterfully engineered to offer a highly focused and remarkably efficient charging experience, yet it remains power-packed.
With dual power input, S100neo effortlessly provides up to 100W from an AC source and excels with a potent 200W output on a de facto standard XT60 DC plug for RC hobbyists.
This versatility ensures that S100neo meets a wide range of charging demands, whether at your pit table or in the field.

Size and Weight
Case Material: Plastic
Case Size: 105*105*62mm
Weight: 340g

Display
Display Type: TN
Size: 1.77 inch
Panel Active Area: 28.03*35.04mm
Resolution: 128x160 Pixel
Number of Colors: 262K

Power
DC Input Voltage: 10-30V
AC Input Voltage : 100-240V

Charger power:
DC Input Voltage: 6-30V
AC Input Voltage: 100-240V 50/60Hz

Discharge power:
Max. 20W based on 6S(4.2V/S)

Battery
LiPo/LiHV/LiFe/LiIon: 1-6cells
NiMH/NiCd: 1-15cells
Pb: 3S/6S/12S

Charge and Discharge
Charge current
LiPo/LiFe/LiIon/LiHV/NiMH/NiCd/Pb：0.1-12.0A

Discharge current
LiPo/LiFe/LiIon/LiHV/NiMH/NiCd/Pb：0.1-2.0A

Balance current
LiPo/LiFe/LiIon/LiHV：Max. 1000mA

Operation
LiPo/LiFe/LiIon/LiHV: Balance charging, Charging, Discharging, Storage
NiMH/NiCd: Charge, Discharge, Cycle charge-discharge, Cycle discharge-charge, Repeat charge
Pb: Normal, Standard charge, Low-temperature charge, AGM charge/discharge

• Description

  Features:
  1. Two gradually adjustable, fully-proportional channels
  2. Servo reverse (reverses the direction of travel) and trim function
  3. Trimming function for acceleration and steering
  4. Dual rate for both channels (travel limiting of the servos)
  5. Battery status display via LED
  6. Failsafe
  
  Technical data:
  • Operating voltage of the transmitter 4.8 – 6V
  • Powering of receiver (without BEC) 11 V possible
  • Uni connector system Futaba/Graupner-J/R

   

  4x AAA batteries sold separately 

The MTC (Mini Touring Car) Class has seen an explosion of interest in the last few years and we're happy to offer these tyres for the class.

A large amount of testing has gone into these tyres by some of the best MTC drivers in the UK.

The tyres are available in 4 shore ratings, 35, 37, 40 and 45 and are pre-glued on a very nice and durable 5 spoke wheel with 12mm hex fitting. 

Trued to 52.5mm diameter, with a width of 25.5mm, supplied in pairs

Buy a trackside refreshment whilst using our raceway - for Drivers and Spectators