1/14 Euro Truck Legal Upgrades

Replacement springs for the DSG Shock Gear series, with sets specific to each damper length!

Feature:

• For: DSG 50mm Damper

• Material: Steel

• Color: Black

Include:

• Very Soft Springs (4 pcs)

• Soft Springs (4 pcs)

• Medium Springs (4 pcs)

• Hard Springs (4 pcs)

• Very Hard Springs (4 pcs)

Aluminum body with springs

Total length: approx. 58mm

Mounting length: approx. 52mm

Ø Shock Body: 16mm

Ø Mounting holes: 3mm

Weight/pcs. (filled): 12g

Shock body color: red

Spring color: gunmetal

Knurled screw for stepless adjustment

The shock absorbers are delivered oil filled with (100CPS)

Recommended/Suitable for 1:10 touring cars; Tamiya M chassis

Scope of delivery: 4 pcs.

earing grease for heavy duty use when oil doesn't cut it anymore, each tub of grease also comes with a small spoon so you can apply it without getting hands dirty.

Feature:

• For: Bearing ,Gears, Nylon, Plastic Parts, etc , Ball Diff of Touring Drift car
• Silicone Compound
• Anti-oxidation
• Anti-corrosion
• Smooth

Include:

• Grease (1 Tub)

Stickers as shown. Printed on white. Need to be cut. 

USE SPARSELY ON FRONT DIFF of Tamiya Euro Trucks

Drive train and suspension parts are under high stress in every RC vehicle, which means they face higher wear than most other parts. To further increase the durability, most of them are metal-to-metal connections. But without the correct lubrication, these tough materials will wear faster as you may think off!

Together with a Germany special manufacturer for grease and oil we developed the MXLR Anti-Wear Grease. It consists of well chosen high quality ingredients in a special mixture to reduce the wear of driveshaft and gears, or lets better say all metal-to-metal connections! It's high pressure resistant and sticky as hell, to stay in the right place! 

This is not "just another grease" as this special formula reduces the friction and wear even more than any other standard Anti-Wear grease! 

To increase the lifetime of your gearboxes, driveshafts or any other metal parts which are under high load, just apply some amount of the MXLR Anti-Wear Grease and enjoy the extra protection.
We recommend to service your vehicle regularly to keep it always in best shape! 

It comes in a clear 5g. container which keeps the grease clean and in perfect condition during storage in your RC bags. 
Additional tip: Once the grease is empty, the container is great to store small parts like screw, clips or pins.

• Yeah Racing Aluminium Big Bore Go 50mm Damper Set 4pcs for 1/10 RC Touring Car Blue #BBG-0050BK

  Description:

  Big Bore Go! Purchase this set of big bore shocks, add oil and off you go! Includes two different types of mounting pillow ball studs for different types of cars! Included are different springs for you to fine tune your ride so you don't have to go looking for different springs after purchasing our set of shocks! If you really want to get serious with tuning, there are different holes of pistons included so you can adjust the how the shock reacts to the shock oil.

  ASSEMBLY REQUIRED AND SHOCK OIL TO COMPLETE - 350CST RECOMMENDED

  USE SHOCK PUMP IF NEEDED

•  

  Feature:
  

  • For: RC Car
  • Material: Aluminum
  • Color : Black
  
  

  Include:
  

  • Aluminum Big Bore Go Dampers (4 pcs)
  • Soft Springs - Red (4 pcs)
  • Medium Springs - Yellow (4 pcs)
  • Hard Springs - Blue (4 pcs)
  • Pillow Balls (8 pcs)
  • M3 x 5.5mm Ballstuds (8 pcs)
  • M3 x 5.5mm Threaded Ballstuds (8 pcs)
  • Pistons (8 pcs)

Feature:

• For: Big Bore Go 50mm Damper

• Material: Steel

• Color: Black

Include:

• Soft Springs - Red (4 pcs)
  

• Medium Springs - Yellow (4 pcs)
  

• Hard Springs - Blue (4 pcs)

Replacement springs for the DSG Shock Gear series, with sets specific to each damper length!

Feature:

• For: DSG 50mm Damper

• Material: Steel

• Color: Black

Include:

• Very Soft Springs (4 pcs)

• Soft Springs (4 pcs)

• Medium Springs (4 pcs)

• Hard Springs (4 pcs)

• Very Hard Springs (4 pcs)

Assembly required! Use shock pliers and shock pump where possible! Comes with 300cst oil.

Description:

This is a Yeah Racing newly designed damper set for 1/10 RC cars. Despite the 5 stage stiffness spring sets, Yeah racing damper set featured the state of the art technology interchangeable damper piston which gives so much serious tuner so much potential to tune their damper settings. The interchangeable piston will allow 3 settings of damper's response as well as 4 rebound rate adjustment to fit different racing situation and maximum performance.

The Yeah Racing new damper set has spent great effort on increasing the durability and maintenance ease. The damper shaft is coated with titanium for minimizing friction and longer lifespan. To cope with the need to change the damper piston from time to time, the shock gear have selected premium quality anti-leak O-Ring to keep the damper oil in place. CNC machined high grade aluminum were used to build this high end damper set for maximum durability at the minimum weight.

Rebound Core System:

The Yeah Racing Aluminum damper set comes with 6 different damper piston for fine-tuning the rebound characteristics. The set of 3 general type piston allow you to adjust 3 different rebound rate where has the same depression and compression resistant. While the "V piston" featured a v shape damper oil tunnel which allows the depression rate differ from the compression rate for more precise tuning. For instance, a rear wheel drive RC can be benefit by a stiffer rear wheel compression rate to offset the weight transfer during hard acceleration while maintaining balanced depression rate throughout the whole car.

Feature:

• For: 1/10 RC Cars
• Material: Aluminum
• Color: Gun Metal
• CNC Machined
• Titanium Coated Damper Shafts
• Selected Anti-Leak O-Ring
• Unique Piston Design
• Rebound Core System
• Aluminum Damper Cylinder
• Easy To Refill Damper Oil
• Simple Installation

Specification:

• 55mm Hole to Hole

Include:

• • Shock-Gear (4 pcs)
  • Piston 2 Holes (4 pcs)
  • Piston 3 Holes (4 pcs)
  • Piston 4 Holes (4 pcs)
  • V Piston 2 Holes (4 pcs)
  • V Piston 3 Holes (4 pcs)
  • V Piston 4 Holes (4 pcs)
  • Spring Red (Super Soft) (4 pcs)
  • Spring Yellow (Soft) (4 pcs)
  • Spring Blue (Medium) (4 pcs)
  • Spring White (Hard) (4 pcs)
  • Spring Black (Super Hard) (4 pcs)
  • Ball End (8 pcs)
  • Ball Nut (4 pcs)
  • Shock Oil 300CST 15ml (1 pc)
  • Manual (1 pc)

Assembly required! Use shock pliers and shock pump where possible! Comes with 300cst oil.

Description:

This is a Yeah Racing newly designed damper set for 1/10 RC cars. Despite the 5 stage stiffness spring sets, Yeah racing damper set featured the state of the art technology interchangeable damper piston which gives so much serious tuner so much potential to tune their damper settings. The interchangeable piston will allow 3 settings of damper's response as well as 4 rebound rate adjustment to fit different racing situation and maximum performance.

The Yeah Racing new damper set has spent great effort on increasing the durability and maintenance ease. The damper shaft is coated with titanium for minimizing friction and longer lifespan. To cope with the need to change the damper piston from time to time, the shock gear have selected premium quality anti-leak O-Ring to keep the damper oil in place. CNC machined high grade aluminum were used to build this high end damper set for maximum durability at the minimum weight.

Rebound Core System:

The Yeah Racing Aluminum damper set comes with 6 different damper piston for fine-tuning the rebound characteristics. The set of 3 general type piston allow you to adjust 3 different rebound rate where has the same depression and compression resistant. While the "V piston" featured a v shape damper oil tunnel which allows the depression rate differ from the compression rate for more precise tuning. For instance, a rear wheel drive RC can be benefit by a stiffer rear wheel compression rate to offset the weight transfer during hard acceleration while maintaining balanced depression rate throughout the whole car.

Feature:

• For: 1/10 RC Cars
• Material: Aluminum
• Color: see photo 
• CNC Machined
• Titanium Coated Damper Shafts
• Selected Anti-Leak O-Ring
• Unique Piston Design
• Rebound Core System
• Aluminum Damper Cylinder
• Easy To Refill Damper Oil
• Simple Installation

Specification:

• 55mm Hole to Hole

Include:

• • Shock-Gear (4 pcs)
  • Piston 2 Holes (4 pcs)
  • Piston 3 Holes (4 pcs)
  • Piston 4 Holes (4 pcs)
  • V Piston 2 Holes (4 pcs)
  • V Piston 3 Holes (4 pcs)
  • V Piston 4 Holes (4 pcs)
  • Spring Red (Super Soft) (4 pcs)
  • Spring Yellow (Soft) (4 pcs)
  • Spring Blue (Medium) (4 pcs)
  • Spring White (Hard) (4 pcs)
  • Spring Black (Super Hard) (4 pcs)
  • Ball End (8 pcs)
  • Ball Nut (4 pcs)
  • Shock Oil 300CST 15ml (1 pc)
  • Manual (1 pc)

Assembly required! Use shock pliers and shock pump where possible! Comes with 300cst oil.

Description:

This is a Yeah Racing newly designed damper set for 1/10 RC cars. Despite the 5 stage stiffness spring sets, Yeah racing damper set featured the state of the art technology interchangeable damper piston which gives so much serious tuner so much potential to tune their damper settings. The interchangeable piston will allow 3 settings of damper's response as well as 4 rebound rate adjustment to fit different racing situation and maximum performance.

The Yeah Racing new damper set has spent great effort on increasing the durability and maintenance ease. The damper shaft is coated with titanium for minimizing friction and longer lifespan. To cope with the need to change the damper piston from time to time, the shock gear have selected premium quality anti-leak O-Ring to keep the damper oil in place. CNC machined high grade aluminum were used to build this high end damper set for maximum durability at the minimum weight.

Rebound Core System:

The Yeah Racing Aluminum damper set comes with 6 different damper piston for fine-tuning the rebound characteristics. The set of 3 general type piston allow you to adjust 3 different rebound rate where has the same depression and compression resistant. While the "V piston" featured a v shape damper oil tunnel which allows the depression rate differ from the compression rate for more precise tuning. For instance, a rear wheel drive RC can be benefit by a stiffer rear wheel compression rate to offset the weight transfer during hard acceleration while maintaining balanced depression rate throughout the whole car.

Feature:

• For: 1/10 RC Cars
• Material: Aluminum
• Color: see photo 
• CNC Machined
• Titanium Coated Damper Shafts
• Selected Anti-Leak O-Ring
• Unique Piston Design
• Rebound Core System
• Aluminum Damper Cylinder
• Easy To Refill Damper Oil
• Simple Installation

Specification:

• 55mm Hole to Hole

Include:

• • Shock-Gear (4 pcs)
  • Piston 2 Holes (4 pcs)
  • Piston 3 Holes (4 pcs)
  • Piston 4 Holes (4 pcs)
  • V Piston 2 Holes (4 pcs)
  • V Piston 3 Holes (4 pcs)
  • V Piston 4 Holes (4 pcs)
  • Spring Red (Super Soft) (4 pcs)
  • Spring Yellow (Soft) (4 pcs)
  • Spring Blue (Medium) (4 pcs)
  • Spring White (Hard) (4 pcs)
  • Spring Black (Super Hard) (4 pcs)
  • Ball End (8 pcs)
  • Ball Nut (4 pcs)
  • Shock Oil 300CST 15ml (1 pc)
  • Manual (1 pc)

Assembly required! Use shock pliers and shock pump where possible! Comes with 300cst oil.

Description:

This is a Yeah Racing newly designed damper set for 1/10 RC cars. Despite the 5 stage stiffness spring sets, Yeah racing damper set featured the state of the art technology interchangeable damper piston which gives so much serious tuner so much potential to tune their damper settings. The interchangeable piston will allow 3 settings of damper's response as well as 4 rebound rate adjustment to fit different racing situation and maximum performance.

The Yeah Racing new damper set has spent great effort on increasing the durability and maintenance ease. The damper shaft is coated with titanium for minimizing friction and longer lifespan. To cope with the need to change the damper piston from time to time, the shock gear have selected premium quality anti-leak O-Ring to keep the damper oil in place. CNC machined high grade aluminum were used to build this high end damper set for maximum durability at the minimum weight.

Rebound Core System:

The Yeah Racing Aluminum damper set comes with 6 different damper piston for fine-tuning the rebound characteristics. The set of 3 general type piston allow you to adjust 3 different rebound rate where has the same depression and compression resistant. While the "V piston" featured a v shape damper oil tunnel which allows the depression rate differ from the compression rate for more precise tuning. For instance, a rear wheel drive RC can be benefit by a stiffer rear wheel compression rate to offset the weight transfer during hard acceleration while maintaining balanced depression rate throughout the whole car.

Feature:

• For: 1/10 RC Cars
• Material: Aluminum
• Color: Blue
• CNC Machined
• Titanium Coated Damper Shafts
• Selected Anti-Leak O-Ring
• Unique Piston Design
• Rebound Core System
• Aluminum Damper Cylinder
• Easy To Refill Damper Oil
• Simple Installation

Specification:

• 55mm Hole to Hole

Include:

• • Shock-Gear (4 pcs)
  • Piston 2 Holes (4 pcs)
  • Piston 3 Holes (4 pcs)
  • Piston 4 Holes (4 pcs)
  • V Piston 2 Holes (4 pcs)
  • V Piston 3 Holes (4 pcs)
  • V Piston 4 Holes (4 pcs)
  • Spring Red (Super Soft) (4 pcs)
  • Spring Yellow (Soft) (4 pcs)
  • Spring Blue (Medium) (4 pcs)
  • Spring White (Hard) (4 pcs)
  • Spring Black (Super Hard) (4 pcs)
  • Ball End (8 pcs)
  • Ball Nut (4 pcs)
  • Shock Oil 300CST 15ml (1 pc)
  • Manual (1 pc)

Replace parts to the original motor gear/pinions for Tamiya car

(WILL FIT TAMIYA TT01E EURO TRUCK)

How to calculate Final Gear Ratio?

For example, if your car has the following setting:

Motor Gear: 25

Spur Gear: 84

Pulley: 19

Gear Differential: 38

Firstly, we need to calculate the 'Motor Gear to Spur Gear Ratio', divide 84 by 25 equal to 3.36. Then we need to calculate the 'Pulley to Gear Differential Ratio', divide 38 by 19 equal to 2. Finally, the 'Final Gear Ratio' is 3.36 x 2 = 6.72.

Motor Turn used based on Final Gear Ratio:

3.5T: 9.5-10

4.0T: 8.9-9.5

8.5T: 6.4-7.0

The above guideline is for reference only. The recommended motor turn may vary depending on different brands. More information can be found on motors' offical websites.

Feature:

• Material: Aluminum 7075
• Color: Titanium

Include:

• Aluminum 7075 Hard Coated Motor Gear/Pinions 06P 19T (1 pc)
• Set screw (1 pc)

Assembly required! Use shock pliers and shock pump where possible! Comes with 300cst oil.

Description:

This is a Yeah Racing newly designed damper set for 1/10 RC cars. Despite the 5 stage stiffness spring sets, Yeah racing damper set featured the state of the art technology interchangeable damper piston which gives so much serious tuner so much potential to tune their damper settings. The interchangeable piston will allow 3 settings of damper's response as well as 4 rebound rate adjustment to fit different racing situation and maximum performance.

The Yeah Racing new damper set has spent great effort on increasing the durability and maintenance ease. The damper shaft is coated with titanium for minimizing friction and longer lifespan. To cope with the need to change the damper piston from time to time, the shock gear have selected premium quality anti-leak O-Ring to keep the damper oil in place. CNC machined high grade aluminum were used to build this high end damper set for maximum durability at the minimum weight.

Rebound Core System:

The Yeah Racing Aluminum damper set comes with 6 different damper piston for fine-tuning the rebound characteristics. The set of 3 general type piston allow you to adjust 3 different rebound rate where has the same depression and compression resistant. While the "V piston" featured a v shape damper oil tunnel which allows the depression rate differ from the compression rate for more precise tuning. For instance, a rear wheel drive RC can be benefit by a stiffer rear wheel compression rate to offset the weight transfer during hard acceleration while maintaining balanced depression rate throughout the whole car.

Feature:

• For: 1/10 RC Cars
• Material: Aluminum
• Color: Blue
• CNC Machined
• Titanium Coated Damper Shafts
• Selected Anti-Leak O-Ring
• Unique Piston Design
• Rebound Core System
• Aluminum Damper Cylinder
• Easy To Refill Damper Oil
• Simple Installation

Specification:

• 50mm Hole to Hole

Include:

• • Shock-Gear (4 pcs)
  • Piston 2 Holes (4 pcs)
  • Piston 3 Holes (4 pcs)
  • Piston 4 Holes (4 pcs)
  • V Piston 2 Holes (4 pcs)
  • V Piston 3 Holes (4 pcs)
  • V Piston 4 Holes (4 pcs)
  • Spring Red (Super Soft) (4 pcs)
  • Spring Yellow (Soft) (4 pcs)
  • Spring Blue (Medium) (4 pcs)
  • Spring White (Hard) (4 pcs)
  • Spring Black (Super Hard) (4 pcs)
  • Ball End (8 pcs)
  • Ball Nut (4 pcs)
  • Shock Oil 300CST 15ml (1 pc)
  • Manual (1 pc)

Reduce wear and tear on your metal parts when rubbing together with this Anti-Wear Metal Grease, each tub of grease also comes with a small spoon so you can apply it without getting hands dirty.

Feature:

• For : Metal Parts (CVD, Drive Shaft, Metal Gears, Diff Differential)

• Molybdenum Disulphide (MOS2) Grease

• With Ultra Fine Graphite Powder
  

• Anti-oxidation

• Anti-corrosion

Include:

• Grease (1 Tub)

Rebuild membrane parts for Yeah Racing's DSG Shock-Gear sets! Common parts throughout all lengths.

MADE TO REBUILD TAMIYA TT01E YEAH RACING 50MM DSG SHOCK KITS FROM YEAH RACING

Feature:

• For: Yeah Racing's DSG Shock-Gear
• Material: Silicone / Foam

Include:

• O-Rings (4 pcs)
• Membrane (4 pcs)
• Spring Tension O-Ring (4 pcs)
• Foam (4 pcs)

Assembly required! Use shock pliers and shock pump where possible! Comes with 300cst oil.

Description:

This is a Yeah Racing newly designed damper set for 1/10 RC cars. Despite the 5 stage stiffness spring sets, Yeah racing damper set featured the state of the art technology interchangeable damper piston which gives so much serious tuner so much potential to tune their damper settings. The interchangeable piston will allow 3 settings of damper's response as well as 4 rebound rate adjustment to fit different racing situation and maximum performance.

The Yeah Racing new damper set has spent great effort on increasing the durability and maintenance ease. The damper shaft is coated with titanium for minimizing friction and longer lifespan. To cope with the need to change the damper piston from time to time, the shock gear have selected premium quality anti-leak O-Ring to keep the damper oil in place. CNC machined high grade aluminum were used to build this high end damper set for maximum durability at the minimum weight.

Rebound Core System:

The Yeah Racing Aluminum damper set comes with 6 different damper piston for fine-tuning the rebound characteristics. The set of 3 general type piston allow you to adjust 3 different rebound rate where has the same depression and compression resistant. While the "V piston" featured a v shape damper oil tunnel which allows the depression rate differ from the compression rate for more precise tuning. For instance, a rear wheel drive RC can be benefit by a stiffer rear wheel compression rate to offset the weight transfer during hard acceleration while maintaining balanced depression rate throughout the whole car.

Feature:

• For: 1/10 RC Cars
• Material: Aluminum
• Color: Blue
• CNC Machined
• Titanium Coated Damper Shafts
• Selected Anti-Leak O-Ring
• Unique Piston Design
• Rebound Core System
• Aluminum Damper Cylinder
• Easy To Refill Damper Oil
• Simple Installation

Specification:

• 50mm Hole to Hole

Include:

• • Shock-Gear (4 pcs)
  • Piston 2 Holes (4 pcs)
  • Piston 3 Holes (4 pcs)
  • Piston 4 Holes (4 pcs)
  • V Piston 2 Holes (4 pcs)
  • V Piston 3 Holes (4 pcs)
  • V Piston 4 Holes (4 pcs)
  • Spring Red (Super Soft) (4 pcs)
  • Spring Yellow (Soft) (4 pcs)
  • Spring Blue (Medium) (4 pcs)
  • Spring White (Hard) (4 pcs)
  • Spring Black (Super Hard) (4 pcs)
  • Ball End (8 pcs)
  • Ball Nut (4 pcs)
  • Shock Oil 300CST 15ml (1 pc)
  • Manual (1 pc)

Assembly required! Use shock pliers and shock pump where possible! Comes with 300cst oil.

Description:

This is a Yeah Racing newly designed damper set for 1/10 RC cars. Despite the 5 stage stiffness spring sets, Yeah racing damper set featured the state of the art technology interchangeable damper piston which gives so much serious tuner so much potential to tune their damper settings. The interchangeable piston will allow 3 settings of damper's response as well as 4 rebound rate adjustment to fit different racing situation and maximum performance.

The Yeah Racing new damper set has spent great effort on increasing the durability and maintenance ease. The damper shaft is coated with titanium for minimizing friction and longer lifespan. To cope with the need to change the damper piston from time to time, the shock gear have selected premium quality anti-leak O-Ring to keep the damper oil in place. CNC machined high grade aluminum were used to build this high end damper set for maximum durability at the minimum weight.

Rebound Core System:

The Yeah Racing Aluminum damper set comes with 6 different damper piston for fine-tuning the rebound characteristics. The set of 3 general type piston allow you to adjust 3 different rebound rate where has the same depression and compression resistant. While the "V piston" featured a v shape damper oil tunnel which allows the depression rate differ from the compression rate for more precise tuning. For instance, a rear wheel drive RC can be benefit by a stiffer rear wheel compression rate to offset the weight transfer during hard acceleration while maintaining balanced depression rate throughout the whole car.

Feature:

• For: 1/10 RC Cars
• Material: Aluminum
• Color: Gun Metal
• CNC Machined
• Titanium Coated Damper Shafts
• Selected Anti-Leak O-Ring
• Unique Piston Design
• Rebound Core System
• Aluminum Damper Cylinder
• Easy To Refill Damper Oil
• Simple Installation

Specification:

• 50mm Hole to Hole

Include:

• • Shock-Gear (4 pcs)
  • Piston 2 Holes (4 pcs)
  • Piston 3 Holes (4 pcs)
  • Piston 4 Holes (4 pcs)
  • V Piston 2 Holes (4 pcs)
  • V Piston 3 Holes (4 pcs)
  • V Piston 4 Holes (4 pcs)
  • Spring Red (Super Soft) (4 pcs)
  • Spring Yellow (Soft) (4 pcs)
  • Spring Blue (Medium) (4 pcs)
  • Spring White (Hard) (4 pcs)
  • Spring Black (Super Hard) (4 pcs)
  • Ball End (8 pcs)
  • Ball Nut (4 pcs)
  • Shock Oil 300CST 15ml (1 pc)
  • Manual (1 pc)

Assembly required! Use shock pliers and shock pump where possible! Comes with 300cst oil.

Description:

This is a Yeah Racing newly designed damper set for 1/10 RC cars. Despite the 5 stage stiffness spring sets, Yeah racing damper set featured the state of the art technology interchangeable damper piston which gives so much serious tuner so much potential to tune their damper settings. The interchangeable piston will allow 3 settings of damper's response as well as 4 rebound rate adjustment to fit different racing situation and maximum performance.

The Yeah Racing new damper set has spent great effort on increasing the durability and maintenance ease. The damper shaft is coated with titanium for minimizing friction and longer lifespan. To cope with the need to change the damper piston from time to time, the shock gear have selected premium quality anti-leak O-Ring to keep the damper oil in place. CNC machined high grade aluminum were used to build this high end damper set for maximum durability at the minimum weight.

Rebound Core System:

The Yeah Racing Aluminum damper set comes with 6 different damper piston for fine-tuning the rebound characteristics. The set of 3 general type piston allow you to adjust 3 different rebound rate where has the same depression and compression resistant. While the "V piston" featured a v shape damper oil tunnel which allows the depression rate differ from the compression rate for more precise tuning. For instance, a rear wheel drive RC can be benefit by a stiffer rear wheel compression rate to offset the weight transfer during hard acceleration while maintaining balanced depression rate throughout the whole car.

Feature:

• For: 1/10 RC Cars
• Material: Aluminum
• Color: Blue
• CNC Machined
• Titanium Coated Damper Shafts
• Selected Anti-Leak O-Ring
• Unique Piston Design
• Rebound Core System
• Aluminum Damper Cylinder
• Easy To Refill Damper Oil
• Simple Installation

Specification:

• 50mm Hole to Hole

Include:

• • Shock-Gear (4 pcs)
  • Piston 2 Holes (4 pcs)
  • Piston 3 Holes (4 pcs)
  • Piston 4 Holes (4 pcs)
  • V Piston 2 Holes (4 pcs)
  • V Piston 3 Holes (4 pcs)
  • V Piston 4 Holes (4 pcs)
  • Spring Red (Super Soft) (4 pcs)
  • Spring Yellow (Soft) (4 pcs)
  • Spring Blue (Medium) (4 pcs)
  • Spring White (Hard) (4 pcs)
  • Spring Black (Super Hard) (4 pcs)
  • Ball End (8 pcs)
  • Ball Nut (4 pcs)
  • Shock Oil 300CST 15ml (1 pc)
  • Manual (1 pc)

(LEGAL AT MOST RC EURO TRUCK CLUBS)

ONLY 16 BEARINGS - FOR USE ON TT01E, USE IN COMBINATION WITH ALLOY STEERING LINKS THAT COME WITH THE 4 EXTRA BELL CRANK BEARINGS NEEDED.

C Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings.

Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance!

These high quality bearings outweigh the other low quality one:

• Aircraft quality material
• More durable
• Higher precision

*Now comes with bearing oil for maintaining bearings in long run. (This new bearing set (with bearing oil) will replace the old item.)

Specification:

• PTFE Bearing For Tamiya TT01 & DF02 RC Touring #YB0082BX
• Material: Metal

Include:

• Bearing (16Pcs)
• Bearing Oil (15ml) #YA-0215

* Photo for Reference Only

(LEGAL AT MOST RC EURO TRUCK CLUBS)

Feature:

• For: All 1/10 Touring Car - Tamiya TT01 / TT01E
• Material: STEEL
• Color: STEEL SHEILDED 
• Qty: 20Pcs FULL SET
• OILER INCLUDED

• Yeah Racing Aluminium Big Bore Go 50mm Damper Set 4pcs for 1/10 RC Touring Car Blue #BBG-0050BU

  Description:

  Big Bore Go! Purchase this set of big bore shocks, add oil and off you go! Includes two different types of mounting pillow ball studs for different types of cars! Included are different springs for you to fine tune your ride so you don't have to go looking for different springs after purchasing our set of shocks! If you really want to get serious with tuning, there are different holes of pistons included so you can adjust the how the shock reacts to the shock oil.

  ASSEMBLY REQUIRED AND SHOCK OIL TO COMPLETE - 350CST RECOMMENDED

  USE SHOCK PUMP IF NEEDED

•  

  Feature:
  

  • For: RC Car
  • Material: Aluminum
  • Color : Blue
  
  

  Include:
  

  • Aluminum Big Bore Go Dampers (4 pcs)
  • Soft Springs - Red (4 pcs)
  • Medium Springs - Yellow (4 pcs)
  • Hard Springs - Blue (4 pcs)
  • Pillow Balls (8 pcs)
  • M3 x 5.5mm Ballstuds (8 pcs)
  • M3 x 5.5mm Threaded Ballstuds (8 pcs)
  • Pistons (8 pcs)