1/12 Mini GT - Tuning Options

Kamtec Medium (Std) Rear Springs for Bangers , 1300's , Hot Rods , Stock Saloon , Minis , Stock Cars etc

New design slightly shorter for less preload .

Hard , Medium and Soft in front and rear available .

Kamtec , the choice of champions

Kamtec Medium (Std) Rear Springs for Bangers , 1300's , Hot Rods , Stock Saloon , Minis , Stock Cars etc

New design slightly shorter for less preload .

Hard , Medium and Soft in front and rear available .

Kamtec , the choice of champions

Kamtec Medium (Std) Rear Springs for Bangers , 1300's , Hot Rods , Stock Saloon , Minis , Stock Cars etc

New design slightly shorter for less preload .

Hard , Medium and Soft in front and rear available .

Kamtec , the choice of champions

Kamtec Medium (Std) Rear Springs for Bangers , 1300's , Hot Rods , Stock Saloon , Minis , Stock Cars etc

New design slightly shorter for less preload .

Hard , Medium and Soft in front and rear available .

Kamtec , the choice of champions

Kamtec Medium (Std) Rear Springs for Bangers , 1300's , Hot Rods , Stock Saloon , Minis , Stock Cars etc

New design slightly shorter for less preload .

Hard , Medium and Soft in front and rear available .

Kamtec , the choice of champions

Kamtec Medium (Std) Rear Springs for Bangers , 1300's , Hot Rods , Stock Saloon , Minis , Stock Cars etc

New design slightly shorter for less preload .

Hard , Medium and Soft in front and rear available .

Kamtec , the choice of champions

From CORE RC are these new low profile M3 Alloy nuts.  Suitable for where space or access is tight also super lightweight.  These slim nuts measure in at 3.3mm in height where a regular M3 Nyloc is 4.0mm. 

This item comes packaged in a labeled re-sealable bag, helping to keep storage and recognition easy.

Standard length Kingpins to fit Kamtec cars

Bangers , Hot Rod , Mini Racer , Hot Hatch , F2 , 1300 Stock Cars , 2 Litre Saloons etc

Will not fit a Ministock or a car with no front suspension .

E Clips not supplied 

Hardened version available

(Use with Part number U3948)

(Use with Part number U3948)

Twin Wheel Large Caravan and Chassis for Banger Racing!

New chassis provided takes all the work out of going Caravan racing.

This caravan is designed as a twin wheel caravan!

You can also use it as a single wheel its up to you.

All you need is an axle or two , spacers wheels and tyres & hook (sold in other listing).

Predrilled for the axles whether used as single or twin.

No bearings needed.

Just cut out the top and screw it together.

All you need to do then is paint it and buy a towing hitch.

Kamtec Caravan made from 2mm ABS white plastic.

This Caravan shell and Chassis is used with a Kamtec Banger kit .

The parts come in white ABS and are not painted or cut out.

Dimensions are 450mm long x 160mm wide and 140mm high.

Designed for use in the very popular 1/12th scale Banger Racing series active in most parts of the country.

If you have not seen this excellent form of racing please email us or look on BRCA website for clubs.

This is as seen in the last picture.

It is an uncut, unpainted 2 piece moulding.

Needs Axle , wheels and tow hook device will need to be made up.

Axle, wheels and tow hook device will need to be made up.

Kamtec Caravan made from 2mm ABS white plastic.

Caravan and chassis for Banger Racing.

Chassis provided takes all the work out of going Caravan racing.

All you need is an axle, spacers wheels and tyres .

Predrilled for the axle.

Just cut out the top and screw it together.

Towing hitch available in another advert

Designed to be used with a Kamtec Banger kit but it should work with most 1/12th scale kits

The parts come in white ABS and are ready to be cut out and painted.

The dimensions of the caravan are 300mm long x 160mm wide and 130mm high.

This body is designed for use in the very popular 1/12th scale Banger Racing series

If you have not seen this excellent form of racing please email us or look on BRCA website for clubs.

This is as seen in the picture.

It is ready to be cut out and painted. 2 piece moulding.

Axle, wheels and tow hook device will need to be made up.

Kamtec Caravan made from 2mm ABS white plastic.

Will need kit U4852 and holes drilling to mount on Kamtec kits

Will need kit U4852 and holes drilling to mount on Kamtec kits

Mini PRO Motor Pod

Designed to fit a Mini Racer Pro / Supastox / NASCAR

Motor can mounted either side.

3D Printed pod exclusively for Kamtec Mini Pro

You will receive pod only as in photo.

Will accept all 540 motors including Brushless

Core RC brass weight measuring 92 x 47mm and with 1mm thickness to allow you to position weight directly under your 1S or 2S shorty battery for the lowest centre of gravity. Super flat with Core RC logo etched on.

Use with standard GT12 Oval/Circuit Wheels.

Use with standard GT12 Oval/Circuit Wheels.

(Use with Part number U3948)

KEY FEATURES

• Super Fast! 
  
  - Ideal for 1/24 to 1/12 on road scale applications
  - Incredible efficiency and low power consumption
  - 2 μsec Dead Band
  - 1-Year Limited Warranty
  
  Ideal for 1/24th to 1/12th on road/ Using a standard 25T Sized Spline. Full sized spline to fit most 1/10th servo savers.
  
  PRODUCT SPECIFICATIONS
  
  Type: Digital
  Bearing: Dual
  Motor Type: Unknown
  Gear Type: Metal
  Gear Material: Titanium & Alu
  control system: pulse width control
  working frequence: 1520μs / 330hz
  operating voltage: dc6.0-7.4v
  operating temperature range: -10 to + 60 degree
  operating speed (6.0v): 0.12 sec/60 degrees at no load
  operating speed (7.4v): 0.10sec/60 degrees at no load
  stall torque (6.0v): 2.5kg.cm (125.0 oz/in)
  stall torque (7.4v): 2.8kg.cm (166.6 oz/in)
  potentiometer drive: direct drive
  dimensions: 22.5mm x 12.5mm x 25.5mm Approx
  weight: 16.0g (1.69 oz)
  connector wire length: jr 110 mm (Approx)