1/10 Car Soldering, Wire, Stands

14awg SILICONE WIRE ORANGE

(100cm)

(100CM)

This is 12AWG Silver Silicone Wire Set (BK/BU/RD).

Feature:

• Assorted Packing - Colors - Black / Blue / Red
• Wire Length - 60 cm each x 3 colors
• Nominal Voltage: 300V or 600V. (It is well-suited for Radio Control Cars which require the standard of 0.1 - 24V.)
• Temperatyre Rang: -60℃~200℃
• Outer Diameter Tolerance: +/-0.1mm
• Test Voltage: 2000v
• Conductor: Tinned Copper
• Insulator: Silicone

Stylish opaque shielding wire for you to install onto your electronics, with several colors for you to custom match your chassis!

Feature:

• For: Electronics
• Material: Rubber Shielded Wire
• Color:See photo Shielding

Include:

• 12AWG Transparent Wire 1m (1 pc)

Stylish opaque shielding wire for you to install onto your electronics, with several colors for you to custom match your chassis!

Feature:

• For: Electronics
• Material: Rubber Shielded Wire
• Color:See photo Shielding

Include:

• 12AWG Transparent Wire 1m (1 pc)

Stylish opaque shielding wire for you to install onto your electronics, with several colors for you to custom match your chassis!

Feature:

• For: Electronics
• Material: Rubber Shielded Wire
• Color:See photo Shielding

Include:

• 12AWG Transparent Wire 1m (1 pc)

Stylish opaque shielding wire for you to install onto your electronics, with several colors for you to custom match your chassis!

Feature:

• For: Electronics
• Material: Rubber Shielded Wire
• Color:See photo Shielding

Include:

• 12AWG Transparent Wire 1m (1 pc)

The 1 mm solder wire heats easily and is ideal for use on circuit boards, metals, models & sculptures. Perfect for modelling, jewellery, hobby, electronics & smaller DIY tasks.

For anyone looking to finish off a neat electronics installation these low profile plugs with grips set things off. The plugs feature a recess area that makes soldering 11-16gaugae wire easy; whilst the colour grip allows for easy identification of polarity and something to grip onto whilst pulling the connector from the terminal (rather than tugging on the wire to unplug from your battery). Finished off with a RC Overhaul logo lasered on top they are not only stylish but functional accessory for anyone looking to overhaul their wiring.

These fit all batteries with a 4mm bullet terminal.

Use a few drops of CA glue to install the grip once the wire has been soldered to the plug.