1/10 Car Charger Wires, Cable, Plugs +

Easily spot positive and negative with these aluminum bullet plug grips, whilst also making installing a removing bullet plugs into your battery a much easier task.

Feature:

• For: Power Connection

• Material: Brass/Aluminum

• Color: See photo

Specification:

• Grips : H9.5 x D10.8 mm

Include:

•  Bullet Plug X 1 Set

Screw down caps with 1.5mm Allen Key

Easily spot positive and negative with these aluminum bullet plug grips, whilst also making installing a removing bullet plugs into your battery a much easier task.

Feature:

• For: Power Connection

• Material: Brass/Aluminum

• Color: See photo

Specification:

• Grips : H9.5 x D10.8 mm

Include:

•  Bullet Plug X 1 Set

Screw down caps with 1.5mm Allen Key

Easily spot positive and negative with these aluminum bullet plug grips, whilst also making installing a removing bullet plugs into your battery a much easier task.

Feature:

• For: Power Connection

• Material: Brass/Aluminum

• Color: See photo

Specification:

• Grips : H9.5 x D10.8 mm

Include:

•  Bullet Plug X 1 Set

Screw down caps with 1.5mm Allen Key

Easily spot positive and negative with these aluminum bullet plug grips, whilst also making installing a removing bullet plugs into your battery a much easier task.

Feature:

• For: Power Connection

• Material: Brass/Aluminum

• Color: See photo

Specification:

• Grips : H9.5 x D10.8 mm

Include:

•  Bullet Plug X 1 Set

Screw down caps with 1.5mm Allen Key

Introducing the Cayote balance charge leads.

High reliability and quality with Cayote's signature colour.

Available in;

XT90 / 5mm 620mm
XT90 / 5mm 450mm
XT60 / 5mm 450mm

Introducing the Cayote balance charge leads.

High reliability and quality with Cayote's signature colour.

Available in;

XT90 / 5mm 620mm
XT90 / 5mm 450mm
XT60 / 5mm 450mm

Introducing the Cayote balance charge leads.

High reliability and quality with Cayote's signature colour.

Available in;

XT90 / 5mm 620mm
XT90 / 5mm 450mm
XT60 / 5mm 450mm

T Connector; Black Sockets - pk4

Allowing charging or ESC fitment to allow use of 4mm or 5mm Bullet Batteries. Much easier to use than the tight standard plugs.

Parallel charging cable with XT60 to 4/5mm plug.  To suit many chargers including the SKY RC T1000 and neo D200.

Allows the power from both output ports to be combined to charge at a higher amp rate.

With balance charge lead.

This Charge Wire has a length of 50cm and comes with XT60 charger connection to Tamiya/JST battery connector.

Due to the 50cm Silicon-Flex cables and the high-end XT60 connector, this charging lead is perfectly suited for its application.

For protection and reliable operation, the charge wires come with a protection mesh and shrink tube on both sides with our logo imprinted.

The Charge Wire range for General Use is available with various connectors.

For use on 4mm bullet connector batteries to typical female deans T plug.

From CORE RC are these Lockdown Heatsink Bullet Plug Grips.

A tight and reliable connection between your LiPo and speed control eliminates any losses of power, increased resistance, arcing and general poor electronic set up.

Giving a reliable connection with an easy twist of the attractive looking locking screw.

Easy to identify Red +ve and Black -ve plugs helps prevent cross connection and that moment every racer dreads, the magic smoke escaping from your speed control !

4/5mm Size.

SOLDERING REQUIRED

This Charge Wire has a length of 50cm and comes with XT60 charger connection to BEC battery connector.

Due to the 50cm Silicon-Flex cables and the high-end XT60 connector, this charging lead is perfectly suited for its application.

For protection and reliable operation, the charge wires come with a protection mesh and shrink tube on both sides with our logo imprinted.

For use on 4mm bullet connector batteries to typical female Tamiya plug

• 4mm male plug to Tamiya plug 90° angle
• Included in the LRP LiPo Power/Hyper Packs with Multi Plug System
• Length 100mm

These conversion plugs allow the use of 4mm bullet connectors in batteries which have 5mm bullet connectors. After installing these conversion, the battery terminals will stick out and increase risk of short circuit.

Feature:

• For: 5mm Plug Battery

• Material: Brass

• Color: Gold

Include:

• Conversion Plugs (4 pcs)

Great charging lead from Monkey King RC for charging receiver and transmitter packs. 

XT60 input connectors and Futaba output.

Robust braided design.

Approx 32cm.

For anyone looking to finish off a neat electronics installation these low profile plugs with grips set things off. The plugs feature a recess area that makes soldering 11-16gaugae wire easy; whilst the colour grip allows for easy identification of polarity and something to grip onto whilst pulling the connector from the terminal (rather than tugging on the wire to unplug from your battery). Finished off with a RC Overhaul logo lasered on top they are not only stylish but functional accessory for anyone looking to overhaul their wiring.

These fit all batteries with a 4mm bullet terminal.

Use a few drops of CA glue to install the grip once the wire has been soldered to the plug.

For anyone looking to finish off a neat electronics installation these low profile plugs with grips set things off. The plugs feature a recess area that makes soldering 11-16gaugae wire easy; whilst the colour grip allows for easy identification of polarity and something to grip onto whilst pulling the connector from the terminal (rather than tugging on the wire to unplug from your battery). Finished off with a RC Overhaul logo lasered on top they are not only stylish but functional accessory for anyone looking to overhaul their wiring.

These fit all batteries with a 4mm bullet terminal.

Use a few drops of CA glue to install the grip once the wire has been soldered to the plug.

Awesome plug covers that help with the removal of your battery plugs. Plus, assist you in plugging in the correct polarity.

Super bling look!

Female plugs - Female found fitted to Batteries to then be able to plug into Male XT60 Plugged Chargers and ESC's.

These connectors are made from high-temp yellow nylon with gold-plated spring pins or sockets moulded in. The shape of the XT60 prevents reverse polarity, and when plugged in the connection is super-solid. Perfect for applications up to 60A continuous current draw.

4 Female plugs.

Male plugs - found Fitted to SKY RC Chargers & ESC's. 

These connectors are made from high-temp yellow nylon with gold-plated spring pins or sockets moulded in. The shape of the XT60 prevents reverse polarity, and when plugged in the connection is super-solid. Perfect for applications up to 60A continuous current draw.

These versions use sheath housing, no need to use heat shrink tube, enhances overall performance in handling and durability.

4 Male plugs.

This 2S Charge Wire for Competition Batteries has a length of 60cm and comes with XT60, XH charger connection to 4/5mm, 2mm battery connectors.

Due to the 60cm Silicon-Flex cables and the high-end 4mm/5mm gold connectors, this charging lead is perfectly suited for its application.

For protection and reliable operation, the charge wires come with a protection mesh and shrink tube on both sides with our logo imprinted.

This Charge Wire solves the common problem, that the balancer wire is coming off unnoticed under the shrink tube at 4/5mm plug, undetectable for the user, making him believe that the battery or charger is broken!
Our Solution: Balancing wires in a protected area - No balancing wire at the 4/5mm plug – No wire can come off!