In-stock products

We stock the full range of PD Racing Parts for the TK10 TR10 TK16 & TR16 RC Trucks.

We stock the full range of PD Racing Parts for the TK10 TR10 TK16 & TR16 RC Trucks.

We stock the full range of PD Racing Parts for the TK10 TR10 TK16 & TR16 RC Trucks.

We stock the full range of PD Racing Parts for the TK10 TR10 TK16 & TR16 RC Trucks.

Introducing the Hobbywing QuicRun 10BL120 G2 - Brushless Electronic Speed Controller.

Intelligent freewheeling technology, greatly improved performance.
The innovative intelligent freewheeling technology enables higher driving efficiency and lower operating temperature of the ESC, and further improves the stability and reliability of the ESC.

Powerful built-in BEC
The ESC has a built-in BEC with a continuous current of 5A and supports a maximum output current of up to 10A. The output voltages are switchable between 6V, 7.4V. This ensures that the ESC is able to support the demanding high-torque servos in the market.

Efficient cooling system
The integrated radiator design, combined with the patented copper thermal conduction sink on the internal power board of the ESC, facilitates the rapid conduction of internal heat to the radiator, and the fan is added to dissipate heat.
This results in an efficient heat dissipation system to ensure that the ESC is always performing at its best.

Capacitor Thermal Protection
Capacitor thermal protection is designed and implemented into the ESC to effectively prevent capacitors from exploding and causing irreversible damages to the ESC due to overloading.

Built-in capacitor
Super large built-in capacitor, The built-in capacitor of the ESC is as high as 1640uF. External capacitors are not needed for 10th scale models on the market and helps improves ease of use.

High protection level, all-weather operation
The IP-67 waterproof Rating guarantees excellent waterproof and dustproof protection. The whole power system is able to drive on a variety of surfaces including mud, sand, ice, snow and water without damaging the power unit.

Specifications

Type
Scale - 1/10th
Brushed/Brushless - BRUSHLESS ONLY
Sensored/Sensorless - SENSORED
Waterproof - No

Specifications
Cont./Peak Current - 120A/760A
Input Voltage - 1-2S LiPo
BEC Output - 6V/7.4V@4A

Wires & Connectors
Input Wires -Black-12AWG-200MMmm*1 / Red--12AWG-200MMmm*1 
Output Connectors - Blue-12AWG-200mm*1 Yellow-12AWG-200mm*1 Orange-12AWG-200mm*1

(No battery plug fitted - not included)

ESC Programming via
SET Button on ESC - Supported
LED Program Box - Supported
LCD Program Box - Supported
OTA Programmer - Not Supported
Program Port - Separate Program Port

Firmware
Firmware Upgrade - Not Supported

Size & Weight
Size -43*36.8*32.3mm 
Weight -101.5g (Included wires&connectors) 

Applications
Motors -Sensorless or Sensored Brushless Motor 

Vehicles -1/10^th Touring Cars/Buggies/Drift Cars
KV Rating/T Count -2SLipo≥4.5T 3SLipo≥10.5T 3650 Size Motor 

Note JR is wired opposite to Futaba.

Designed to replace the brass bearings on the double wheeled axles of the US (Twin Axle) Trailers.

Charge your micro rc 2S batteries with this charger cable made specifically for batteries with a single JST-XH plug.

Feature:

• For: Charger
• Material: Metal/Plastic
• Color: Black
• XT60 to 3 Pin JST-XH Connector
• Voltage Range : 0.35A to 0.5A

Specification:

• Total length : 38cm

Include:

• Charge Cable (1 pc)

Fastrax Team Tool Imperial/Screwdriver Set (6 Pieces)

Those of you that own Team Losi and Team Associated cars will know only too well that obtaining the correct wrenches can be a problem. Fastrax have a remedy with this handy boxed 6 piece set that includes wrenches and screwdrivers all at an amazingly low price.

Balance charge extension lead.

These cool looking disks are glued by the customer on the external face of the wheel with super glue to protect the foam from the high rigours of oval/mini racing.

The disk will help prevent tyre chunking on side impacts.

White.

SupaStox & Mini GT12 oval wheels with cool looking disks are glued by the customer on the external face of the wheel with super glue to protect the foam from the high rigours of oval/mini racing.

The disk will help prevent tyre chunking on side impacts.

White wheels grey disks.

BattCave JOK3R Mini Rear Axle. JKR-M02

Now Available in 2 options;
🦇 Stainless Steel.
🦇 NEW: Nickel-Plated EN8 High Tensile Steel – Extra strength with corrosion resistance

Sold individually

BattCave JOK3R Mini Rear Bodypost Mount, JKR-321

Printed with our proprietary methods and our select filaments.

🦇 Sold Individually. 

🦇 3d printed in the BattCave. 

We’ve made small design optimizations to the BattCave JOK3R Mini A-Arms with the new V2 design!

• +0.5mm Ride Height Adjustment: This change provides additional front clearance, perfect for those running ultra-small front tires.

• New Stronger Material: Improved impact dissipation and overall parts durability while maintaining the quality and performance you expect from BattCave.

• All New Steering Buffer Limiters: For a limited time, every V2 design set includes our all-new steering buffer limiters—designed to better dissipate impacts and enhance durability of the front end in hard impacts.

Currently, we are offering the 2+0, 2+1, 4+1 and 7+1 geometry options, with our other geometries rolling out over the next few weeks.

Important: We do not recommend mixing V2 arms with the original release spec. Due to the +0.5mm ride height adjustment, mixing will result in uneven ride height on the front end from side to side.

Fine-tune your JOK3R's performance with the BattCave JOK3R Mini A-Arms, meticulously designed for racers who demand precision and control. Crafted using our proprietary 3D printing methods, these A-Arms offer a blend of durability, lightweight construction, and advanced geometry options to perfect your vehicle's front-end setup. Thanks to their built-in geometries, making adjustments is incredibly easy, allowing you to quickly adapt to changing track conditions or personal preferences.

🦇 Performance-Optimized Geometry: Choose from various configurations to fine-tune your RC car's handling. Whether you're aiming for high-speed stability or tight cornering, each model offers distinct geometry to optimize performance for different driving conditions.

🦇 3D Printed Excellence: Printed in the BattCave using our exclusive filaments and advanced 3D printing techniques, these A-Arms provide exceptional strength and precision.

🦇 Easy Adjustability: The built-in geometries make it simple to make changes and tweaks, enabling you to quickly and easily dial in the perfect setup for your driving style and track conditions.

🦇 Sold in Pairs: Each set includes a pair of A-Arms, ensuring you have the necessary components to fine-tune your vehicle's front suspension setup.

• Material: High-performance 3D printed filament
• Design: Engineered for strength and lightness
• Compatibility: Compatible with all JOK3R models

At BattCave, we specialize in pushing the limits of RC performance with cutting-edge 3D printing technology and precision engineering. Our JOK3R Mini A-Arms are crafted for those who seek the ultimate in customization and control, with the added benefit of easy adjustability to suit any racing condition.

SKU: JKR-3A51, JKR-3A52, JKR-3A41-V2, JKR-3A42, JKR-3A20-V2, JKR-3A21-V2, JKR-3A71-V2

BattCave JOK3R+ Mini Short A-Arms

Developed specifically for the BattCave JOK3R+, our new Short A-Arms form an important part of the revised JOK3R+ front suspension.

The shorter A-Arm design has been developed to help give the JOK3R+ its easier, more forgiving driving characteristics, while retaining the precise and responsive front-end feel expected from the JOK3R platform.

Produced using our revised high-performance material, the new Short A-Arms offer increased strength and improved impact resistance, helping to make the JOK3R+ front end more durable without compromising precision or performance.

Each pair is also supplied with our new Front Steering Rubber Limiters. These act as impact absorbers, helping to dissipate heavy impacts through the front suspension and protect the surrounding components, further improving front-end durability.

Caster and camber geometry is built directly into each A-Arm, allowing racers to quickly change the front-end characteristics of the car and fine-tune the setup for different track conditions and driving styles.

Available Geometries

🦇 2+0 – JKR-3A20-S

🦇 2+1 – JKR-3A21-S

🦇 4+0 – JKR-3A40-S

🦇 4+1 – JKR-3A41-S

🦇 7+0 – JKR-3A70-S

🦇 7+1 – JKR-3A71-S

Key Features

🦇 New Short A-Arm Geometry – developed specifically for the revised JOK3R+ front suspension.

🦇 Easier, More Forgiving Handling – the revised suspension geometry contributes to the more accessible and confidence-inspiring driving characteristics of the JOK3R+.

🦇 Revised High-Performance Material – increased strength and improved impact resistance for greater front-end durability.

🦇 Front Steering Rubber Limiters Included – act as impact absorbers to help dissipate heavy impacts and protect surrounding front-end components.

🦇 Six Geometry Options – choose from 2+0, 2+1, 4+0, 4+1, 7+0 and 7+1 to fine-tune your front-end setup.

🦇 Built-In Geometry – caster and camber settings are incorporated directly into the A-Arms, making setup changes quick and repeatable.

🦇 Precision 3D Printed – designed and manufactured in-house using our proprietary 3D printing methods.

🦇 Sold in Pairs – supplied as one matched pair of Short A-Arms, complete with Front Steering Rubber Limiters.

🦇 JOK3R+ Specific – designed exclusively for the BattCave JOK3R+ Mini competition chassis.

BattCave JOK3R+ Mini Short A-Arms

Developed specifically for the BattCave JOK3R+, our new Short A-Arms form an important part of the revised JOK3R+ front suspension.

The shorter A-Arm design has been developed to help give the JOK3R+ its easier, more forgiving driving characteristics, while retaining the precise and responsive front-end feel expected from the JOK3R platform.

Produced using our revised high-performance material, the new Short A-Arms offer increased strength and improved impact resistance, helping to make the JOK3R+ front end more durable without compromising precision or performance.

Each pair is also supplied with our new Front Steering Rubber Limiters. These act as impact absorbers, helping to dissipate heavy impacts through the front suspension and protect the surrounding components, further improving front-end durability.

Caster and camber geometry is built directly into each A-Arm, allowing racers to quickly change the front-end characteristics of the car and fine-tune the setup for different track conditions and driving styles.

Available Geometries

🦇 2+0 – JKR-3A20-S

🦇 2+1 – JKR-3A21-S

🦇 4+0 – JKR-3A40-S

🦇 4+1 – JKR-3A41-S

🦇 7+0 – JKR-3A70-S

🦇 7+1 – JKR-3A71-S

Key Features

🦇 New Short A-Arm Geometry – developed specifically for the revised JOK3R+ front suspension.

🦇 Easier, More Forgiving Handling – the revised suspension geometry contributes to the more accessible and confidence-inspiring driving characteristics of the JOK3R+.

🦇 Revised High-Performance Material – increased strength and improved impact resistance for greater front-end durability.

🦇 Front Steering Rubber Limiters Included – act as impact absorbers to help dissipate heavy impacts and protect surrounding front-end components.

🦇 Six Geometry Options – choose from 2+0, 2+1, 4+0, 4+1, 7+0 and 7+1 to fine-tune your front-end setup.

🦇 Built-In Geometry – caster and camber settings are incorporated directly into the A-Arms, making setup changes quick and repeatable.

🦇 Precision 3D Printed – designed and manufactured in-house using our proprietary 3D printing methods.

🦇 Sold in Pairs – supplied as one matched pair of Short A-Arms, complete with Front Steering Rubber Limiters.

🦇 JOK3R+ Specific – designed exclusively for the BattCave JOK3R+ Mini competition chassis.