In-stock products

Core RC brass weight measuring 92 x 47mm and with 1mm thickness to allow you to position weight directly under your 1S or 2S shorty battery for the lowest centre of gravity. Super flat with Core RC logo etched on.

The Rebel MTC body is sure to be a big hit at the track !  Proven shape and design matching modern Touring Car body trends.

The Rebel is supplied clear with overspray film, wing, mounting hardware and window and light masks.

No light or grill decals are included.

To suit 210 to 225mm wheelbase cars.

170mm Width

76 grams painted, ready to race.

Items needed to complete
Paint
Window Masking
Hobby Knife or Scissors for trimming
Stickers
Wing
Mirrors

Capacity: 3g

Caution:

• Keep out of reach of small children.
• It must not be inhaled or ingested.
• Keep away from eyes. If accidental exposure occurs, immediately flush with water and seek medical attention.

ETRONIX XT-90 CONNECTOR (MALE/FEMALE) BLACK

Xt90 is bigger than XT60

Soldering Required

ETRONIX EC5 5MM GOLD CONNECTORS (MALE & FEMALE)

Soldering required

From MonkeyKingRC is this extremely handy Balance Charge Adapter Board.

Plug into the output of your charger using either the XT60 or 4mm bullet connectors and charge a wide variety of batteries with different connector types.

It has the ability to charge XT90, XT60, XT30, T plug and JST in 2S, 3S, 4S, 5S and 6S.

Extremely simple, but great to have at hand in any workshop or pit box.

To plug into any SKY RC charger and adapt to charge IC5 Batteries. 

• Version: XT60 to EC5
• Suitable for all common chargers with XT60 output connector
• Cable length: 150 mm
• Cable type: 14AWG

SUPPLIED CLEAR! PAINT AND ASSEMBLY REQUIRED

The second model in the Mon-Tech Pick Up line series. The 'M' Pick Up is designed to fit all Tamiya M chassis models.

Supplied clear with window masks, decals and overspray film.

Width 165mm, wheelbase 210mm approx.

Spider Grip has been developed in conjunction with World and European Champions to provide the highest level of grip with unprecedented levels of consistency from the start of the race to finish line. In formulating Spider Grip careful consideration was given to extending the life of the tyre and even though Spider Grips provides the traction champions require it also helps reduce tyre wear.

This is an ideal additive for foam tyres on carpet and asphalt, looking to start the race faster then Aqua could be the right additive for you. 

Assembly required! Use shock pliers and shock pump where possible! Comes with 300cst oil.

Description:

This is a Yeah Racing newly designed damper set for 1/10 RC cars. Despite the 5 stage stiffness spring sets, Yeah racing damper set featured the state of the art technology interchangeable damper piston which gives so much serious tuner so much potential to tune their damper settings. The interchangeable piston will allow 3 settings of damper's response as well as 4 rebound rate adjustment to fit different racing situation and maximum performance.

The Yeah Racing new damper set has spent great effort on increasing the durability and maintenance ease. The damper shaft is coated with titanium for minimizing friction and longer lifespan. To cope with the need to change the damper piston from time to time, the shock gear have selected premium quality anti-leak O-Ring to keep the damper oil in place. CNC machined high grade aluminum were used to build this high end damper set for maximum durability at the minimum weight.

Rebound Core System:

The Yeah Racing Aluminum damper set comes with 6 different damper piston for fine-tuning the rebound characteristics. The set of 3 general type piston allow you to adjust 3 different rebound rate where has the same depression and compression resistant. While the "V piston" featured a v shape damper oil tunnel which allows the depression rate differ from the compression rate for more precise tuning. For instance, a rear wheel drive RC can be benefit by a stiffer rear wheel compression rate to offset the weight transfer during hard acceleration while maintaining balanced depression rate throughout the whole car.

Feature:

• For: 1/10 RC Cars
• Material: Aluminum
• Color: Blue
• CNC Machined
• Titanium Coated Damper Shafts
• Selected Anti-Leak O-Ring
• Unique Piston Design
• Rebound Core System
• Aluminum Damper Cylinder
• Easy To Refill Damper Oil
• Simple Installation

Specification:

• 50mm Hole to Hole

Include:

• • Shock-Gear (4 pcs)
  • Piston 2 Holes (4 pcs)
  • Piston 3 Holes (4 pcs)
  • Piston 4 Holes (4 pcs)
  • V Piston 2 Holes (4 pcs)
  • V Piston 3 Holes (4 pcs)
  • V Piston 4 Holes (4 pcs)
  • Spring Red (Super Soft) (4 pcs)
  • Spring Yellow (Soft) (4 pcs)
  • Spring Blue (Medium) (4 pcs)
  • Spring White (Hard) (4 pcs)
  • Spring Black (Super Hard) (4 pcs)
  • Ball End (8 pcs)
  • Ball Nut (4 pcs)
  • Shock Oil 300CST 15ml (1 pc)
  • Manual (1 pc)