In-stock products

Q foam offers more performance than A foam in most conditions. It does however have higher wear rates so needs to be replaced slightly more often than A. It works great on ETS type carpet. Compared with T foam it is capable of matching T foams performance on lap time, although it has a tendency to lose some of its performance throughout the race when using all non-oil type additives such as SXT3.0 or Nosram Carpet.

The Electric Touring Car Class on Foams has seen an explosion of interest in the last few years and we're happy to offer these tyres for the class.

A large amount of testing has gone into these tyres by some of the best TC drivers in the UK.

The tyres are available in 4 shore ratings, 35, 37, 40 and 45 and are pre-glued on a very nice and durable 5 spoke wheel with 12mm hex fitting. 

Sold in pairs of two.

X type rubber pre-glued tyres from Rush.

This rubber type is a bit more old school compared to modern rubbers.

Very good on low traction and cooler temperatures.

Moulded rubber insert.

FASTRAX PARTS STORAGE CASE 200MM X 135MM (15 SECTIONS)

Keep your parts organised with this handy storage box from Fastrax.

Assembly required! Use shock pliers and shock pump where possible! Comes with 300cst oil.

Description:

This is a Yeah Racing newly designed damper set for 1/10 RC cars. Despite the 5 stage stiffness spring sets, Yeah racing damper set featured the state of the art technology interchangeable damper piston which gives so much serious tuner so much potential to tune their damper settings. The interchangeable piston will allow 3 settings of damper's response as well as 4 rebound rate adjustment to fit different racing situation and maximum performance.

The Yeah Racing new damper set has spent great effort on increasing the durability and maintenance ease. The damper shaft is coated with titanium for minimizing friction and longer lifespan. To cope with the need to change the damper piston from time to time, the shock gear have selected premium quality anti-leak O-Ring to keep the damper oil in place. CNC machined high grade aluminum were used to build this high end damper set for maximum durability at the minimum weight.

Rebound Core System:

The Yeah Racing Aluminum damper set comes with 6 different damper piston for fine-tuning the rebound characteristics. The set of 3 general type piston allow you to adjust 3 different rebound rate where has the same depression and compression resistant. While the "V piston" featured a v shape damper oil tunnel which allows the depression rate differ from the compression rate for more precise tuning. For instance, a rear wheel drive RC can be benefit by a stiffer rear wheel compression rate to offset the weight transfer during hard acceleration while maintaining balanced depression rate throughout the whole car.

Feature:

• For: 1/10 RC Cars
• Material: Aluminum
• Color: Blue
• CNC Machined
• Titanium Coated Damper Shafts
• Selected Anti-Leak O-Ring
• Unique Piston Design
• Rebound Core System
• Aluminum Damper Cylinder
• Easy To Refill Damper Oil
• Simple Installation

Specification:

• 50mm Hole to Hole

Include:

• • Shock-Gear (4 pcs)
  • Piston 2 Holes (4 pcs)
  • Piston 3 Holes (4 pcs)
  • Piston 4 Holes (4 pcs)
  • V Piston 2 Holes (4 pcs)
  • V Piston 3 Holes (4 pcs)
  • V Piston 4 Holes (4 pcs)
  • Spring Red (Super Soft) (4 pcs)
  • Spring Yellow (Soft) (4 pcs)
  • Spring Blue (Medium) (4 pcs)
  • Spring White (Hard) (4 pcs)
  • Spring Black (Super Hard) (4 pcs)
  • Ball End (8 pcs)
  • Ball Nut (4 pcs)
  • Shock Oil 300CST 15ml (1 pc)
  • Manual (1 pc)

Intellect RX LiPo.

Designed for Xray Nitro cars with a shorter battery box.

1800mAh
2S
13.7*27.5*83mm
RX Connector - can be cut to fit RED JST plug.
58g
13.32Wh

Introducing the SANWA Gemini Sport Radio Set with RX391W receiver.

The Gemini Sport is based upon the popular MX-6 FH-E system and is supplied with 1 x RX-391W waterproof receiver.

Specification (From MX-6)

- Display Model Name on LCD
- Dual Rate(D/R)
- End Point Adjustment(EPA)
- Exponential(EXP)
- Anti Lock Brake(ALB)
- Trim(TRM)
- Model Memory [10 Model](MODEL)
- Sub-Trim(SUB-T)
- Reverse (REV)
- Model Name (NAME)
- Voltage Monitor (BATT)
- Supplied with RX-391W Waterproof Receiver
- Supplied with 4 x AA Battery box (Requires batteries)

Recommended LiPo battery IP455085-2S - Intellect Tx Lipo 2300mAh 1C 2S MX11

RADIO-BATTERY-CHARGER INCLUDED!

Comes with drift wheels and tyres - swop out for Carpet Tyres and Race!

RADIO SHOWN MAY VARY*

Take to the streets with FTX’s new Banzai drift chassis. Modelled around the hugely popular FTX Vantage and Carnage platform, the Banzai brings Japanese drift styling to the entry level Ready-To-Run arena.

Featuring a 4wd shaft driven design with front and rear metal-geared differentials, the Banzai is 99% complete from the box. Blue anodized aluminium components add a little style to the chassis along with the functionality of oil filled adjustable shock absorbers, front CVA universal driveshafts, ball bearings, adjustable suspension turnbuckles for tuning and a centre drive slipper to protect the transmission.

A waterproof electronic speed control, servo and receiver allow for use in a wide range of conditions and the 2.4ghz radio provides interference free signal no matter where you are.

Topped off and finished with an S15 style pre-printed drift body and a hard compound drift tyre on scale finish wheels, the Banzai is the perfect introduction to sideways street action!

FEATURES

• RTR with Etronix 2.4ghz Radio System
• Waterproof receiver
• Waterproof brushed motor speed control
• Waterproof steering servo
• 550 brushed motor
• Voltz 1800mah 7.2v NiMh battery
• Wall charger for battery
• Moulded tub chassis
• 4wd shaft drive with slipper system
• Big bore oil filled adjustable shocks
• Gearbox metal crown and pinion gear
• Front universal driveshafts
• Adjustable turnbuckles
• Adjustable suspension (droop, camber, toe-in & wheelbase)
• Foam front bumper
• Scale finished wheels
• Drift tyres

SPECIFICATIONS

Length: 440mm
Width: 195mm
Height: 130mm
Wheelbase: 255mm - 256mm
Front Tyre: 24 x 60mm
Rear Tyre: 24 x 60mm
Gear Ratio: 6.5:1

• 🏁 Lexan Mini Racer Body Shell (Part #757)

  Upgrade your track setup with this high-performance Box Arch Mini Racer body shell! 🏎️💨

  Key Features & Compatibility:

  • 🎯 Designed To Fit: Kamtec Mini Racer, Battcave Joker, Mardave, TWR, and similar chassis.

  • 📏 Wheelbase: 178mm

  • 🪽 Includes: Comes with a custom curved rear wing!

  • 🛠️ Material: Clear, durable Lexan Polycarbonate (comes unpainted and uncut so you can create your own custom livery 🎨).

  What’s Included in the Pack? 📦

  • 🖼️ Window Masks (Included for clean painting)

  • 🪟 Window Surrounds

  • 🎁 FREE Sticker Set & Decals! 🤩

  Please Note: ⚠️

  • ❌ Not Suitable For: Standard Kamtec cars like Hot Rods or 1300 stock chassis.

  • 👹 Looking for a round Arch? Check out our Round Arch Mini listing!

  • 🚗 More Options: We have many other Mini body shell styles available in our shop!

FOR 540 Brushed / 3650 Brushless Motors 

Powered via a JST plug from the Receiver

Radio and receiver 

1x 1800mah Nimh battery

1x usb charger 

New Phat Bodies Mugen CRX bodyshell.

Race inspired designed bodyshell for the popular Mardave and Kamtec 1/12th Mini stock class.

160mm wide and 175mm wheelbase

Moulded in 0.7mm race weight Lexan polycarbonate for superior quality and durability.

Comes complete with pre cut vinyl window masks and light/grill stickers sheet external overspray film and ‘Phat Bodies’ stickers.

Bodyshell comes CLEAR, so will require cutting, trimming and painting to fit.
The bodyshell in the photo’s has been painted to represent the finished item.

WRENCH 3/4/5/5.5MM

w/PROTECTIVE SLEEVE

Items shown in diagram are for example of area intended for fitment only. Only the parts in the main photo are included.

Items shown in diagram are for example of area intended for fitment only. Only the parts in the main photo are included.

Items shown in diagram are for example of area intended for fitment only. Only the parts in the main photo are included.

Items shown in diagram are for example of area intended for fitment only. Only the parts in the main photo are included.

Core RC - Curved Body Scissors for easy cutting out of complex body shapes.
With smart Core RC logo.

FITTED WITH 'T' DEANS PLUG

VOLTZ 4200mah ROUND/OVAL CASE 2S 40C 7.4V LIPO STICK PACK - DEANS

DESIGNED TO FIT CHASSIS'S THAT HAVE A CURVED BATTERY TRAY FITMENT, LIKE THE TAMIYA TT01E.

SPECIFICATIONS

• Capacity: 4200mah
• Voltage: 7.4v
• Max Cont. Discharge: 40c
  
• Weight: 300g (APPROX)
• Dimensions (mm): 138x46x25 (APPROX)

Upgrade part for you to install shorty packs onto your Tamiya TT02, quick battery change with the included elastic bands

Feature:

• For: Tamiya TT02 Series (TT02,TT02B, TT02D ,TT02R,TT02SR, TT02S,TT02SRX)
• Material: Aluminum
• Color: Blue

Include:

• Aluminum Short Battery Holder Set (1pc)