In-stock products

Excellently pre-glued Tamiya mini tyres, new 5 spoke design wheel in 'Flex' material, more grip and less chance of breaking.

40mm diameter wheels (standard M-chassis size)
24mm width
12mm Hex
4mm Axle Hole

For use on Polished Floor Surface - 20mm Wide (SKINNY)

(USE WITH - 1/10 RC CAR SST Mini Pins 20mm wide (SKINNY) - Yellow (2pc) U6671)

(USED AT BURGH RACE CLUB)

Supastox GT12 Circuit and Oval pre glued tyres line. Contact RC has put in a great deal of development time to provide the best tyre balance and traction. With help from our drivers Ben Harding, World Champion in the Stock oval class and 2013 BRCA GT12 Champion Chris Ashton.

01/01/2023

Now include cool looking disks are glued by the customer on the external face of the wheel to protect the foam from the high rigours of oval racing.

The disk will help prevent tyre chunking on side impacts.

They are included in all JM tyres.

Stylish toughened glass setup boards are ideal for setting up your 1/10th Touring, GT10, LMP12, GT12 or 1/10th Off Road buggies.

They are perfect for measuring ride height and camber and for providing a smooth, hard, easy clean work surface. They are not intended for 100% accurately measuring chassis flatness.

Also available separately are neoprene, zip up bags to protect your set up board during transportation. Also available with cool branded carry bag - see our other items G354 

Specs;

40x30cm
6mm Toughened Glass

The XR10 Justock G3S has precise control and powerful performance.  It is suitable for 1/10th on-road and off-road zero-timing (blinky) competitions.

(2024 VERSION)

This speed control is not BRCA legal for 2024 Nationals in the control 17.5T or FWD class. 

Fan intelligent start and stop function
When the ESC temperature is low, the fan does not activate, when the ESC temperature reaches the preset value, the fan automatically turns on.
The intelligent start and stop function of the fan not only reduces noise, saves power, but also ensures that the ESC works in a good temperature range.

Freewheeling Feature
With the freewheeling function turned-on, the ESC temperature is lower, the vehicle decelerates faster when the throttle input is off, and it has better controllability around the corners.

Built-in polarity protection
One danger that all electrical systems face is a reversed polarity from the power source. This can be caused by a short circuit, or usually, accidentally reversing the terminals.

Multi RPM limit, select as needed
Supports 79RPM Limits
（10000-88000RPM）RPM limit value selection. It can be programmed through the LCD programming box or OTA module. It is simple and convenient to meet the RPM limit requirements of various competitions in the world.

Built-in capacitor module, optimized layout
The built-in capacitor module eliminates the need for external capacitors and unwanted space.

Built in BEC
The ESC has a built-in BEC which can support a maximum output current of up to 8A. The output voltage at either 6V or 7.4V. This will ensure constant power supplied to today’s high-torque servos in the market.

Built-in data logging function
The ESC has a built-in data recording function making it easy to obtain the operating status.
The data includes;

Minimum voltage
Maximum ESC temperature
Maximum current
Maximum motor temperature
Maximum RPM

Wireless connection for data recording and analysis
After the ESC is connected to the OTA Bluetooth module, connect to the ESC through the HW Link mobile app and turn on the real-time data recording function. You can view data such as throttle, voltage, current, temperature, speed, etc. in real time. In addition, OTA can record the above data using HW Link. Easy to implement data analysis functions. Note: Due to the Bluetooth transmission distance, the effective distance is about 5m!

Parameters optimized
It is tailored and are more in line with competition needs.

Type

Scale - 1/10th
Brushed/Brushless - BL
Sensored/Sensorless - SD
Waterproof - No

Specifications

Cont./Peak Current - 60A/380A
Input Voltage - 2S LiPo
BEC Output - 6V/7.4V @4A

Wires & Connectors

Input Wires - Black-14AWG-200mm*1 Red-14AWG-200mm*1
Output Wires - Black-14AWG-200mm*1 Black-14AWG-200mm*1 Black-14AWG-200mm*1
Input Connectors - No
Output Connectors - No

Fan

Size - 25x25x10mm
Output Wires - 5-7.4V
Input Connectors - Powered by BEC

Data Recording

Extreme Value - Not Supported
Real-Time Date - Not Supported
Historical data (Graph) - Not Supported

ESC Programing via

SET Button on ESC - Not Supported
LED Program Box - Not Supported
LCD Program Box - Supported
WiFi Module - Supported
OTA Programmer - Supported
Programming Port - Separate

Firmware

Firmware Upgrade - Supported

Size & Weight

Size - 40.9x33.9x32.1mm
Weight - 75.4g(w/Wires)

Applications

Applications - SL BL Motors / SD BL Motors
Vehicles - 1/10th,1/12th On-road and Off-road club competition and normal training
KV Rating/T Count - ≥10.5T 3650 Motor

Servo HD R6 Digital 7.4V - 7.5kg/0.08s Gyro and 1/12

Torque(6.0V): 6.5 kg-cm (90.27 oz/in)
Torque(7.4V): 7.5 kg-cm (104.16 oz/in)
Speed: 0.09 sec (6.0V) ¦ 0.08 sec (7.4V)
Operating Voltage: 6.0 ~ 8.4 DC Volts
Weight: 28.5 g (1.01 oz)
Bearing Type: Ball Bearing x 2
Motor Type: Coreless Motor
Gear Type: Copper & Aluminum
Operating Temperature: -20~60°C
Working frequency: 1520µs / 333hz
Size: 35.0 x 15.1 x 29.5 mm ( 1.38 x 0.59 x 1.136 in)

Servo HD LF-13MG MG Digital 13.0kg/0.12sec dble BB Alu Case Met. Gear

This Digital servo has metal housing around the middle which allows for heat to rapidly dissipate. With double ball bearings you will have smooth movement and powerful torque when you need it. You cant beat the performance of this servo and at such a great price it's a no-brainer.

Specification:

• Torque(4.8V): 10.5 kg-cm (145.8 oz/in)
• Torque(6.6V): 13.0 kg-cm (180.5 oz/in)
• Speed: 0.15 sec (4.8V) │ 0.12 sec (6.6V)
• Operating Voltage：4.8 ~ 6.6 DC Volts
• Weight: 60 g (2.12 oz)
• Bearing Type：Ball Bearing x 2
• Motor Type：DC Motor
• Gear Type：Copper & Aluminum
• Operating Temperature：-20℃~60℃
• Working frequence：1520μs / 333hz
• Size：40.7 x 20.5 x 39.5mm (1.60 x 0.80 x 1.55 in)
• Horns and Mounting Accessories Supplied

Supastox GT12 Circuit and Oval pre glued tyres line. Contact RC has put in a great deal of development time to provide the best tyre balance and traction. 

For 1/12th Oval classes our popular Red Stripe control tyre is now available Pre-Glued.

- 37 Shore.
- Precisely trued and glued in house to 51mm in diameter.
- Supplied with our anti chunk wheel rims.

For use on ESC's/Chargers fitted with xt60 Male Plugs, such as Sky RC Charger - Converts to Male EC5 to allow charging of EC5 Batteries.

The Yeah Racing Aluminum Bearing Steering Set is an optional part to replace the stock plastic component and bearings. Yeah Racing carefully constructed the set with the high grade Aluminum to ensure the steering set durability even under hard impact. Additionally the overall rigidity and bearing smoothness is highly increased, thereby raising the driving stability and steering performance.

Feature:

• For: Tamiya TT02
• Material: Aluminum
• Color: Blue

Include:

• Steering Arm (3pcs)
• M3 x 10mm Flat Head Screw (2pcs)
• M3 x 12mm Button Head Screw (3pcs)
• M3 x 14mm Button Head Screw (2pcs)
• 5mm Screw Holder (2pcs)
• 5 x 8 x 2.5 mm Ball Bearing (4pcs)
• 3 x 6 x 2.5 mm Ball Bearing (2pcs)

(LEGAL AT MOST RC EURO TRUCK CLUBS)

Feature:

• For: All 1/10 Touring Car - Tamiya TT01 / TT01E
• Material: STEEL
• Color: STEEL SHEILDED 
• Qty: 20Pcs FULL SET
• OILER INCLUDED

The SKY RC D100neo AC/DC Charger from SKY RC.

2X XT60 MALE PLUGS REQUIRED/CHARGE LEADS REQUIRED - NOT INCLUDED

Introducing the next generation of charging with the SKY RC D100neo, the latest and improved version of the D100 charger packed with innovative features and improved functionality.

With two charging ports, the SKY RC D100neo delivers a total output of 200W and 10A per port, allowing two batteries to be charged at the same time. Thanks to the balancer current of 1000mA per cell, the balancing between the batteries is significantly improved. The high-precision balancer also ensures an impressive accuracy of ±0.02V and thus optimizes voltage compensation.

Whether you're a PRO or a JOE this charger will take your charging skills to a whole new level.

Unleash the Thrill!
Experience the next level of charging with SkyRC D100neo, the latest and upgraded version of D100 charger, packed with innovative features and improved functionality.
Featuring two charging ports, SkyRC D100neo delivers a total power of 200W and 10A per port, allowing simultaneous charging of multiple chemistry batteries. With a balance current of 1000mA per cell, it speeds up balancing among battery cells, enhancing the charging process. The high precision balancer ensures impressive accuracy of ±0.02V, optimizing voltage equalization.
Whether you're a seasoned professional or a passionate hobbyist, this charger takes your RC charging to new heights.

Efficient, yet Compact.
Outrageous performance is packed through 2 Independent ports in the compact footprint.
You can simultaneously charge two RC batteries with two ports, even in different chemistry. Whether you need to power up your RC car or fly a drone, D100neo has you covered!
Despite its small size, the D100neo doesn't compromise on power or efficiency with up to 200W on an output! The charger boasts a vibrant color display featuring a remarkable 76,800 pixels, surpassing the 8,192-pixel black white screen of the D100.
*When powered by DC,D100neo can output up to 200W of charging power.

Do more with one charger!
Multiple Chemistries Go.
With exceptional versatility, D100neo can charge a wide range of battery chemistries. This powerhouse can charge from LiPo and LiFe to Li-ion, LiHV, Pb, NiMH, and NiCd.
You are turbocharging your time with a single charger that can handle multiple battery types.
Whether you're an RC guru, a beginner, or somewhere in between, D100neo is the reliable and adaptable choice that ensures optimal performance for all your batteries.
Unlock the full potential of your battery arsenal with D100neo – versatility multiplied capability.

Dual AC/DC Input: Efficient. Beyond.
D100neo is designed to provide RC enthusiasts unparalleled flexibility in the garage or out in the field. With dual port input, you have the freedom to choose between AC or DC input based on your specific scenarios.
In AC mode, the charging power reaches an impressive overall 100W, dynamically distributing to each port. When powered by DC, the charger unleashes its true potential, offering an astounding overall 200W of charging power. With a single port capable of reaching up to 100W, you can power up your batteries with remarkable speed and precision.
Whether you are a beginner or a seasoned RC guru engaging in racing, D100neo ensures efficient charging and optimal performance for your RC batteries.

Unmatched Charging, Impressive Discharging.
This cutting-edge device not only offers efficient charging but also provides impressive discharging functionality. The built-in balance port enables D100neo to discharge faster, allowing it to discharge at up to 25W when used in conjunction with the main port. In contrast, the discharge rate when using the main port alone is limited to 5W.
Whether you need to prepare your batteries for storage, balance their voltage levels, or safely discharge them after use, the D100neo is there for you!
This advanced discharging feature allows you to maintain the health and longevity of your batteries by precisely controlling the discharge process.

Smart Power Distribution, Efficiency Redefined.
When a single port is in use, the D100neo will provide maximum power output to that specific port. The charging power is distributed dynamically and intelligently when all two ports are simultaneously in use.
Once a particular port has completed its charging task, the remaining port will receive increased power for faster charging. This intelligent and efficient allocation of power ensures optimal utilization at all times.
The charging capabilities of the D100neo are highly flexible, allowing for versatile charging options.

So. Pro. So is Digital Power.
D100neo excels not only in charging, but also as a versatile dual-output digital power supply.
With just a few clicks on the menu, D100neo offers a voltage option, from 2V to 27V, with an adjustable increment of 0.1V. Additionally, the current can be adjusted from 0.2A to 10A, with a precision of 0.1A.
This dual-output digital DC power supply provides two independently controllable power outputs, making it a versatile tool for various electronic testing and prototyping applications.

Balancing batteries made easy and quick.
By connecting the balance port, the D100neo transforms into a versatile battery checker capable of measuring cell voltage and balancing various battery types such as LiPo, LiHV, LiFe, and LiIon. Instantly, you can view the overall voltage and individual cell voltages, helping determine whether the battery is charged, discharged, or balanced.
LiPo batteries are well-known for their high energy density and lightweight nature, making proper care and monitoring essential for safety and longevity. With this functionality, the D100neo acts as a reliable safeguard for your RC batteries.

20W PD 3.0 Port. Energize with Rapid Power Delivery!
With the 20W USB-C PD 3.0 charging port, our RC players can enjoy rapid charging speeds like never before. Whether you're charging your smartphones, tablets, or 2020 MacBook Airs, this powerful port ensures that you can fuel up your devices in a fraction of the time.

Multiplied by Proprietary HyperBoost
Thanks to the 200 MHz ARM Microcontroller, the deployed Oversampling Technology can improve ADC Resolution to 16bit.
The efficient PID mechanism can fine-tune the current to increase response speed and the charge current accuracy.

Charge it cool.
Within the sleek enclosure lies a groundbreaking thermal system designed to let Arm Cortex-M4 fly through heavy workloads at screaming-fast speeds — and stay whisper quiet. The fan will adjust the speed accordingly and dissipate heat more effectively according to the different power usage.

Charge in your language.
ColorX is designed to be easily localized and comfortably engaged. The interface is currently available in English, Dutch, Chinese, French and Japanese*. Users can easily change the language with simple clicks so that they can charge in the most comfortable language.

Universal Voltage. Travel On the Go.
With the universal-voltage input circuit, you don't need to hassle finding a voltage converter between 110V and 220V while traveling around!

Enhanced Protection, Assured Safety.
The SkyRC D100neo charger is built-in with several essential safety features ensuring optimal charging safety.

Rectifier circuit Efficiency Multiplied.
The D100neo uses a proprietary rectifier circuit to efficiently convert DC into safe D/C power for battery charging. And its onboard MCU precisely controls the charging to minimize power loss to create an incredibly compact form factor.

ColorX: Easy to charge, Easy on eyes.
Get ready to be captivated by the sleek and modern ColorX interface by D100neo.
The tailor-designed light cyan and green color scheme is optimized specifically for RC charging, which helps you focus on the setting. The Web 2.0 style, responsive menu, and well-designed icons make the operation more suitable for players accustomed to operating smartphones!
Time to say bye-bye to old-school typography and welcome the bold and beautiful brand-new UI. Charging doesn't have to be boring, and neither does life!

Seamlessly Connect, Effortlessly Upgrade!
Effortlessly connect your D100neo to your PC or Mac via the versatile Type-C port. With Charger Master, take full control and enhance your charging experience. Customize charging rates, monitor battery health, and optimize performance for longer battery life.
Upgrade with ease using the app. Enjoy a fast and reliable upgrade process to enhance your charger's capabilities.
Stay connected, stay updated, and enjoy a happier charging experience.

Specification

Size and Weight

Case Material: PC-ABS V0
Case Size: 116*110*79mm
Weight: 470g
Display
Display Type: TN
Size: 2.8 inch
Panel Active Area: 43.20*57.60mm
Resolution: 240x320 Pixel
Number of Colors: 262K

Power
DC Input Voltage: 10-30V
AC Input Voltage : 100-240V

Charger power:
AC: 100W MAX
DC: 200W MAX

Discharge power:
Main port: 5W
Balance port: 25W MAX (LiPo/6S)

20W USB-C Power Delivery:
QC3.0: 5V⎓3A, 9V⎓2A, 12V⎓1.5A 18W
PD: 5V⎓3A, 9V⎓2.2A, 12V⎓1.67A 20W

Battery
Battery Types/Cells:
LiPo/LiHV/LiFe/LiIon: 1-6cells
NiMH/NiCd: 1-15cells
Pb: 3S/6S/12S

Charge and Discharge

Charge current
LiPo/LiFe/LiIon/LiHV/NiMH/NiCd/Pb：0.2-10.0A

Discharge current
LiPo/LiFe/LiIon/LiHV/NiMH/NiCd/Pb：0.1-2.0A

Balance current
LiPo/LiFe/LiIon/LiHV：1.0A MAX

Operation
LiPo/LiFe/LiIon/LiHV: Balance CHG, Charge, Storage, Discharge
NiMH/NiCd: Charge, Re-Peak, CYCLE_C_D, CYCLE_D_C, Discharge
Pb: Normal, AGM Charge, Cold Charge, Discharge

Torque(4.8V): 8.6 kg-cm (119.4 oz/in)
Torque(6.0V): 9.8 kg-cm (136.1 oz/in)
Speed: 0.16 sec (4.8V) │ 0.14 sec (6.0V)
Operating Voltage：4.8 ~ 6.0 DC Volts
Weight: 56.0 g (1.98 oz)
Bearing Type：Ball Bearing x 2
Motor Type：DC Motor
Gear Type：Copper & Aluminum
Operating Temperature：-10℃~60℃
Working frequency：1520μs / 50hz
Size：40.7 x 20.5 x 39.5 mm ( 1.60 x 0.81 x 1.56 in)

Useful for connecting batteries with Deans connectors to speed controls with Tamiya plugs.

NEW! BattCave JOK3R MAD Mini Front Bumper JKR-BP02

Specifically designed for the Phat Bodies M.A.D Mini bodyshell, our latest 3D printed TPU low-profile front bumper offers increased support and front impact protection by occupying most of the space under the MAD’s expansive front spoiler. Without it, a front-end collision could potentially force the front spoiler under the chassis, resulting in additional damage and loss of control.

🦇Made for Phat bodies MAD Mini

🦇Designed and printed in the BattCave. 

🦇Increases front impact protection.

🦇Low and wide profile offers additional support. 

🦇 M.A.D. specific rear bumper also available!