In-stock products

The MTC (Mini Touring Car) Class has seen an explosion of interest in the last few years and we're happy to offer these tyres for the class.

A large amount of testing has gone into these tyres by some of the best MTC drivers in the UK.

The tyres are available in 4 shore ratings, 35, 37, 40 and 45 and are pre-glued on a very nice and durable 5 spoke wheel with 12mm hex fitting. 

Trued to 52.5mm diameter, with a width of 25.5mm, supplied in pairs

X type rubber pre-glued tyres from Rush.

This rubber type is a bit more old school compared to modern rubbers.

Very good on low traction and cooler temperatures.

Moulded rubber insert.

Get back to GT12 Atom basics with these new GT12 Control Tyres from Contact RC.

GT12 racing has become more complex over recent times with a myriad of different foam compounds to find the ultimate performance.  Now Contact RC are taking it back to basics which made GT12 racing so successful.  

These new control tyres with an easily identifiable green stripe can be adopted at local clubs and larger events to have a more level playing field for all, and keep costs down.  

The control tyres are available in only one compound, 40 shore Front trued to 44mm and 37 shore rear trued to 46mm, selected to give the perfect balance for the majority of conditions.  

Take the dark art of tyres out of the equation and concentrate on having fun!!!

2s Lipo charge lead with XT60 input plug, 4-5mm battery plugs, including 2mm balance plug.

The MTC (Mini Touring Car) Class has seen an explosion of interest in the last few years and we're happy to offer these tyres for the class.

A large amount of testing has gone into these tyres by some of the best MTC drivers in the UK.

The tyres are available in 4 shore ratings, 35, 37, 40 and 45 and are pre-glued on a very nice and durable 5 spoke wheel with 12mm hex fitting. 

Trued to 52.5mm diameter, with a width of 25.5mm, supplied in pairs

Buy a trackside refreshment whilst using our raceway - for Drivers and Spectators 

Buy a trackside refreshment whilst using our raceway - for Drivers and Spectators 

This Touring Car Wheel Arch Cutting Jig is a must for any Touring Car Racer.

The jig ensures accurate and repeatable cutting out of wheel arches time after time. One of the most tricky parts of body prep is now made super simple.

- Simply set your car to the required ride height and position the body shell to your desired height.

- Position the jig flush with the outside of the body shell and locate the centre of the axle through the hole in the tool. The end radius is different from side to side to prevent body tucks so ensure the jig's orientation is correct.

- Hold the jig and draw round the inside with a fine marker pen and then carefully cut to the line with a pair of curved scissors.

- The jig can also measure wing overhang with the handy 10mm step.

https://www.racing-cars.com/product/image/large/cr545_1.jpg

Buy a trackside refreshment whilst using our raceway - for Drivers and Spectators 

As shown -

USB Balance Smart Charger - Max.Charge Power: 10W - Charge Current: Max.0.8A

4x Dry Alkaline Radio Batteries

1x Deans Plug Round cased Lipo Battery 4000mah

Body Replica: Lexan bodyshell - Designed around the Chevy Nascar 

This shell is designed to fit any our NEW 1/12 SUPASTOX Chassis

The shell comes in clear Lexan plastic and is ready paint and cut out.

The dimensions of the shell are:

Length: 350mm approx

Width: 164mm approx

Height: 85mm approx

Wheelbase: 205mmto 210mm MTC (M-Chassis

Lexan Spoiler Included - NO HARDWARE INCLUDED - As these are custom made bodies, they may have tiny imperfections due to the moulding process, but is perfectly normal.

(Masking is included - However no stickers will be included - No stickers for lights, grills etc - most builders mask off the lights and grills and paint instead)

All body detailing will be down to the painter - or ask Frosty Models to print you some stickers inhouse at additional costs.

The Electric Touring Car Class on Foams has seen an explosion of interest in the last few years and we're happy to offer these tyres for the class.

A large amount of testing has gone into these tyres by some of the best TC drivers in the UK.

The tyres are available in 4 shore ratings, 35, 37, 40 and 45 and are pre-glued on a very nice and durable 5 spoke wheel with 12mm hex fitting. 

Sold in pairs of two.

UNIVERSAL USE

T foam is the most complete in the range. It benefits from performance and lap times equal or better than Q foam, with the added benefit of being easier to drive, less twitchy and easy to attack the track with. This often leads to improved lap times. It also has much better durability, lower wear rates (close to A foam) and when using the non-oil type additives, keeps grip to the end of the race much better than our other options. This tyre is great on all carpet types.


If required, use Contact Arbour number J011.

Get back to GT12 basics with these new GT12 Control Tyres from Contact RC.

GT12 racing has become more complex over recent times with a myriad of different foam compounds to find the ultimate performance.  Now Contact RC are taking it back to basics which made GT12 racing so successful.  

These new control tyres with an easily identifiable green stripe can be adopted at local clubs and larger events to have a more level playing field for all, and keep costs down.  

The control tyres are available in only one compound, 40 shore Front trued to 44mm and 37 shore rear trued to 46mm, selected to give the perfect balance for the majority of conditions.  

Take the dark art of tyres out of the equation and concentrate on having fun!!!

01/01/2023

Now include cool looking disks are glued by the customer on the external face of the wheel to protect the foam from the high rigours of oval racing.

The disk will help prevent tyre chunking on side impacts.

They are included in all JM tyres.

4X XT60 MALE PLUGS REQUIRED/CHARGE LEADS REQUIRED - NOT INCLUDED

Mains power lead included 

Introducing the SKY RC Q100neo AC/DC Multi-Function Smart Charger.

Pure Power. Precise Control. Quad Output.
Q100neo powers four independent outputs, each up to 6A, to charge multiple chemistries at once.
From drone soccer to FPV to RC racing, it keeps every pack ready—cutting downtime so you’re back in action faster. With 600 mA balance current and ±0.02 V precision, efficiency and accuracy are built in.
Charging redefined. Effortless, every time.

Compact Size. Mighty Power.
Q100neo arrives in a bold new design—small in size, yet brimming with performance. Agile and tough, it delivers up to 100W on AC and 240W on DC.
Whether plugged in indoors or powered by DC in the field, Q100neo unleashes instant energy to bring your batteries back to full strength—fast.

AC/DC Flex. Fast, Unleashed.
Switch seamlessly between AC or DC, adapting to any setup with ease.
Whether you’re just starting out or chasing the podium, Q100neo delivers stable performance every time.
One charger. Endless scenarios.

Do More With One Charger! Multiple Chemistries Go.
With exceptional versatility, Q100neo can charge a wide range of battery chemistries. This powerhouse can charge everything from LiPo and LiFe to Li-ion, LiHV, Pb, NiMH, and NiCd.
Unlock the full potential of your battery arsenal with Q100neo– versatility multiplied capability.

Discharging Multiplied by Balance Port
The built-in balance port enables Q100neo to discharge faster, allowing it to discharge at up to 15W when used in conjunction with the main port. In contrast, the discharge rate when using the main port alone is limited to just 5W.

Digital Power
Q100neo excels not only in charging, but also as a versatile quad output digital power supply.
With just a few clicks on the menu, Q100neo offers a voltage option, from 1.0V to 30.0V, with an adjustable increment of 0.1V. Additionally, the current can be adjusted from 0.1A to 6.0A, with a precision of 0.1A.
This quad output digital DC power supply provides four independently controllable power outputs, making it a versatile tool for various RC testing and prototyping applications.

Smart Power Distribution Seamless Charging Flexibility.
Under AC input, when two ports are in use, Q100neo will provide maximum power output to that specific ports. The charging power is distributed dynamically and intelligently when all four ports are simultaneously in use.
Once a particular port has completed its charging task, the remaining port(s) will receive increased power for faster charging. This intelligent and efficient allocation of power ensures optimal utilization at all times.
The charging capabilities of Q100neo are highly flexible, allowing for versatile charging options.





Rectifier Circuit, Efficiency Multiplied
The Q100neo uses a proprietary rectifier circuit to efficiently convert DC into safe D/C power for battery charging. And its onboard MCU precisely controls the charging to minimize power loss to create an incredibly compact form factor.

Charge in Your Language
ColorX is designed to be easily localized and comfortably engaged!
The interface is currently available in English, Dutch, French, Chinese and Japanese. Users can easily change the language with simple clicks so that they can charge in the most comfortable language.

Specification

Size and Weight
Case Size: 140x108x43.5mm
Weight: 491g

Display
Display Type: TN
Size: 2.8 inch
Panel Active Area: 43.20*57.60mm
Resolution: 240x320 Pixel
Number of Colors: 262K

Power
AC Input: 100V ~ 240V（50Hz/60Hz）
DC Input: 10V~30V

Charge Power:
AC Input: 100W(±10%)
1 port: Max. 60W
2 ports: 50W + 50W
3 ports: 33W + 33W + 33W (Total power divided by 3)
4 ports: 25W × 4
DC Input: 240w(±10%) 60W *4

Discharge Power:
Main port: 5W
Balance port: Max. 10W（LiPo/4S）

Charge and Discharge
Charge Current: 0.1A~0.5A（±0.1A） 0.6A~6.0A（±10%）
Balance Current: Max. 600mA
Working Mode:
LiPo/LiFe/Li-ion/LiHV: Balance CHG, Charge, Discharge, Storage
NiMH/NiCd: Normal, Discharge, Repeak, CYCLE_D_C, CYCLE_C_D
Pb: Normal, AGM Charge, Cold Charge, Discharge
Battery Types/Cells:
LiPo/LiHV/LiFe/LiIon: 1-4S
NiMH/NiCd: 1-8S
Pb: 3S/6S

Working and Storage
Operating temperature: 0℃-40℃
Working humidity: 5% ~ 75% RH (Non-condensing)
Storage temperature: -10℃ ~ 70℃
Storage humidity: 5% ~ 75% RH (Non-condensing)

• Using 38 shore foam and adding a purple stripe to recognize the compound, mounting it on our rim black 1/12 black carbon rim the tyres perform excellently.  These tyres are suitable for high grip American style tracks and work with the most popular additives.  
  43mm diameter from the box.
• Contact LMP12 tyres with 12mm hex fitting for the Eclipse 4 and other brands using the

Now used on the BRCA 1/12th LMGT3 1/12 Class for either GT12 Atom or Eclipse LMP12

(MIGHT NOT BE LEGAL FOR EURO TRUCK CLUBS)

• There are the 9mm Ball for Yeah Racing TT-125 / TT-126 or Tamiya Original Front Upper / Lower Arm
• Material: Delrin
• Color: Black

Feature:

• For: Yeah Racing TT-125 / TT-126 or Tamiya Original Front Upper / Lower Arm
• Material: Delrin
• Color: Black

Include:

• 9mm Ball (10 Pcs)

VOLTZ CHARGE VAULT LIPO SACK/BAG MEDIUM 22cm x 18cm

Protect your family and home from the hazard of LiPo charging.

This Voltz Vault is a fireproof bag is intended to reduce and minimise the chances of damage in the event of a LiPo battery fire caused by incorrectly or poorly functioning LiPos, especially during charging.

We urge all customers to always practice extreme caution when charging and never leave a charging battery unattended.

Specifications

Dimensions: 22cm x 18cm

XT90 is larger than XT60.

The Contact A30 is now available as tyre and inserts only.  So now you can chose which wheel design you prefer.  The A30 tyre is designed for indoor carpet racing.

The A30 tyre has been developed and tested by Schumacher Racing's experienced staff and team drivers to provide excellent traction and wear rates for the vigour's of carpet racing.

Control tyre for Vintage Touring car events in the UK.