In-stock products

BattCave JOK3R+ Axle O-Ring (10) – JKR-012-RA

Replacement rear axle O-rings for the BattCave JOK3R+.

This is the standard size O-ring supplied with the JOK3R+, used for spacing between the rear axle bearings and drives.

Alternative O-ring sizes are also available, allowing you to fine-tune rear axle float to suit your setup preference.

🦇 Sold as a pack of 10.

Kyosho 1:10 Fazer FZ02 Pre-Glued TC Tyres M8S Watanabe Wheel (2)

Introducing the 1/10 FuriaX Supa 3650 Brushless Motor from SKY RC

FuriaX · Born on the Track.
We test, refine, and perfect every ESC & motor on the FuriaX Track — our own in-house RC circuit built for racing.
Because real performance isn’t proven in labs — it’s earned on the track.
FuriaX is built of hobbyists, by hobbyists, for hobbyists.

First Run. Full Gear.
Ultra-thin 0.2mm Stator Laminations
Less loss. More efficiency. Cooler runs.

6061-T6 Aluminum Can
Strength in structure. Light in weight. Cool in heat.

High-Purity, High-Temp Copper Windings
220°C-rated, high-purity copper windings ensure efficient, low-heat power delivery for stronger punch and higher top speed.

Precision-balanced Rotor
Perfectly balanced for high-speed stability, refined output, and total driving confidence.

Four-Pole 12-Slot
Stronger Torque
Smoother Power
Compared to two-pole motors, the four-pole 12-slot design delivers greater torque and smoother output.
Faster launches, steadier climbs, effortless heavy loads — with refined control even at low speeds.

Effortless Wiring Plug and Play
Pre-soldered 4.0mm gold-plated connectors come factory-fitted, so no soldering is required—just plug in and go, leaving more time for the thrill of the drive. Paired with flexible ABC phase wires in Blue / Yellow / Orange, routing is clearer, cleaner, and more reliable, making installation effortless.

Dust. Mud. Splashes No Problem
Engineered to resist dust and splashes, the motor keeps going strong.
From dirt to mud, it runs smooth and steady.

Versatile Fit Easy Maintenance
Supports most mainstream 1/10 chassis. Drop-in fit, no mods required.

Multiple KV Options
A range of KV ratings to suit track racing, street runs, or light off-road—find your perfect setup.

Specifications

1/10 FuriaX Supa 3650 Brushless Motor
4000 KV
<12V
Voltage
2.0A
No-load Current
75A Max.
Load Current
900W Max.
Power
Ø15*Ø5.00*16
Rotor（mm）

The Grasshopper is a bona fide Tamiya classic, beloved for its smooth assembly and driving experiences, as well as its detailed injection moulded body. In this kit, that Grasshopper body comes moulded in black plastic, with the addition of stickers and lights required to finish it off, as well as painting the driver figure. This 2WD radio controlled buggy will be right at home whether you use it off-road or on.

About the Model

• Length: 389mm, width: 223mm, height: 135mm, weight: 830g
• 380 type motor (chassis compatible with 540 type motor - sold separately)
• This kit has a special black body and fluorescent yellow wheels, plus dedicated sticker colour scheme
• Rear 2-wheel drive
• 3-bevel differential gear
• Independent swing axle front suspension, rolling rigid axle rear suspension, friction dampers
• Tyre width/diameter: 21mm/73mm (front), 41mm/82mm (rear)
• 3-piece assembly wheels, straight ribbed racing front tires, paddle rear tyres
• Front and rear axle compatible with ball bearings (sold separately)

Separately Required Items

• Two-channel radio, steering servo, 7.2volt battery with compatible charger

 

Introducing the SKY RC Ares V4 1/10 Sensored Brushless Motor, with all new design.

ROAR Approved Roaring Ahead
On the track or in every turn, the ROAR-approved ARES PRO 4 delivers uncompromising, professional-grade power.
ROAR isn’t just about compliance—it’s a mark of excellence.
Race with confidence. Race with ARES PRO 4.

BRCA, EFRA and ROAR Legal.

Competition-Optimized Design
Every Detail Tuned to Win. Engineered to Excel.

Low-Resistance Solder Tabs
High-quality tabs minimize power loss, ensuring maximum current flows straight to the rotor.

Stay Cool: CNC Aluminum Heatsink Case with Rear Venting
The precision-machined aluminum case dissipates heat efficiently, while a large rear vent boosts airflow over the Hall sensor for stable, reliable performance.

Global-Grade Bearings & Precision Shaft for Ultra-Smooth Control
Top-tier international brand bearings paired with a high-precision shaft ensure buttery-smooth, accurate operation—race after race.

High-Purity, High-Temp Copper Windings
220°C-rated, high-purity copper windings ensure efficient, low-heat power delivery for stronger punch and higher top speed.

Precision-Balanced, Heat-Resistant Rotor
Meticulously balanced for ultra-smooth rotation and minimal vibration, the rotor is crafted with a 200°C heat-resistant, explosion-proof structure—delivering consistent power, higher RPMs, and lasting durability.

200°C High-Temp Neodymium Magnets
200°C heat-resistant neodymium magnets and a high-efficiency iron core deliver strong torque, stable magnetism, and consistent performance under pressure.

Advanced Sensor
No Hesitation. Just Precision.
ARES PRO 4 features advanced sensor technology for ultra-smooth throttle response and precise low-speed control—crucial for technical tracks and tight corners. By eliminating cogging, or hesitation at low RPMs, it delivers seamless, immediate power exactly when you need it.

Adjustable Timing.
Any Track.
Adjustable timing is the core of brushless precision, enabling power delivery to adapt seamlessly to any track condition.

Low Timing (0-20deg)
Later power delivery creates smooth output, stable torque, and linear starts.
Ideal for precise control through continuous corners, preventing sudden wheel spin.

Mid Timing (20-40deg)
Balances instant punch with smooth sustained acceleration.
Perfect for mixed circuits with straights and curves, such as drift tracks

High Timing (40-60deg)
Earlier power delivery drives rapid RPM climbs and explosive top speed.
Best for flat-out straights, achieving higher RPM under the same voltage.

Redundant Dual Sensor Ports.
Zero Hassle.
Placed in different orientations, the dual sensor ports simplify wiring and offer built-in redundancy. If one fails, the other keeps you running—seamlessly and reliably.
Plug in. Power on. No setup—just pure performance.
*Before use, please confirm your ESC’s continuous/peak current, supported cell count, and sensor port type to ensure compatibility with the motor specifications.

Modular by Design.
Built to Stay New.
ARES PRO 4 features a fully rebuildable, modular design—allowing easy disassembly of the housing, stator, windings, and bearings with standard RC tools.
Clean, service, and swap components to keep performance sharp and consistent, race after race.
Always fresh. Always in control.

Multiple Turn Options.
Ready for Any Track.
Each turn rating gives your car its own distinct character.
Lower turns deliver explosive speed and powerful thrust.Higher turns offer smooth, consistent power for confident control, lap after lap.

Size and Weight
Size: 35.8x35.8x52mm
Weight: 148g±5g

Working and Storage
Operating temperature: -10°C-80°C
Operating humidity: 20%-80% (non-condensing)
Storage temperature: 0°C-50°C
Storage humidity: 30%-60% (non-condensing)

Introducing the Hobbywing Justock Combo 'JS2' with XR10 G3S speed control, paired with the Hobbywing  G2.1 21.5T fixed timing brushless motor.

The XR10 Justock G3S has precise control and powerful performance.  It is suitable for 1/10th on-road and off-road zero-timing (blinky) competitions.

This speed control is not BRCA legal for 2024 Nationals in the control 17.5T or FWD class.  Control products for that class are HW30112003, HW38020321, HW30408011

Speed Control Features.

Fan intelligent start and stop function
When the ESC temperature is low, the fan does not activate, when the ESC temperature reaches the preset value, the fan automatically turns on.
The intelligent start and stop function of the fan not only reduces noise, saves power, but also ensures that the ESC works in a good temperature range.

Freewheeling Feature
With the freewheeling function turned-on, the ESC temperature is lower, the vehicle decelerates faster when the throttle input is off, and it has better controllability around the corners.

Built-in polarity protection
One danger that all electrical systems face is a reversed polarity from the power source. This can be caused by a short circuit, or usually, accidentally reversing the terminals.

Multi RPM limit, select as needed
Supports 79RPM Limits
（10000-88000RPM）RPM limit value selection. It can be programmed through the LCD programming box or OTA module. It is simple and convenient to meet the RPM limit requirements of various competitions in the world.

Built-in capacitor module, optimized layout
The built-in capacitor module eliminates the need for external capacitors and unwanted space.

Built in BEC
The ESC has a built-in BEC which can support a maximum output current of up to 8A. The output voltage at either 6V or 7.4V. This will ensure constant power supplied to today’s high-torque servos in the market.

Built-in data logging function
The ESC has a built-in data recording function making it easy to obtain the operating status.
The data includes;

Minimum voltage
Maximum ESC temperature
Maximum current
Maximum motor temperature
Maximum RPM

Wireless connection for data recording and analysis
After the ESC is connected to the OTA Bluetooth module, connect to the ESC through the HW Link mobile app and turn on the real-time data recording function. You can view data such as throttle, voltage, current, temperature, speed, etc. in real time. In addition, OTA can record the above data using HW Link. Easy to implement data analysis functions. Note: Due to the Bluetooth transmission distance, the effective distance is about 5m!

Parameters optimized
It is tailored and are more in line with competition needs.

Type

Scale - 1/10th
Brushed/Brushless - BL
Sensored/Sensorless - SD
Waterproof - No

Specifications

Cont./Peak Current - 60A/380A
Input Voltage - 2S LiPo
BEC Output - 6V/7.4V @4A

Wires & Connectors

Input Wires - Black-14AWG-200mm*1 Red-14AWG-200mm*1
Output Wires - Black-14AWG-200mm*1 Black-14AWG-200mm*1 Black-14AWG-200mm*1
Input Connectors - No
Output Connectors - No

Fan

Size - 25x25x10mm
Output Wires - 5-7.4V
Input Connectors - Powered by BEC

Data Recording

Extreme Value - Not Supported
Real-Time Date - Not Supported
Historical data (Graph) - Not Supported

ESC Programing via

SET Button on ESC - Not Supported
LED Program Box - Not Supported
LCD Program Box - Supported
WiFi Module - Supported
OTA Programmer - Supported
Programming Port - Separate

Firmware

Firmware Upgrade - Supported

Size & Weight

Size - 40.9x33.9x32.1mm
Weight - 75.4g(w/Wires)

Applications

Applications - SL BL Motors / SD BL Motors
Vehicles - 1/10th,1/12th On-road and Off-road club competition and normal training
KV Rating/T Count - ≥10.5T 3650 Motor

-------------------------------------------------------------

Motor Features

- The use of a heat-resistant magnet attached aluminum case and double insulated windings, high precision bearings, and rotor with a strong structure guarantees outstanding performance and super durability.
- The built-in Hall sensor non-adjustable end bell combined with a high precision and balanced rotor guarantees the user a smooth and linear power on demand.
- The silicon O-ring seal fitted between the end bell and stator helps to conduct inner heat to the motor case and prevent dust from entering the HALL sensor.
- The detachable structure design for daily cleaning and maintenance can effectively prolong the service life of this Justock motor and improve its operating efficiency.
- This motor is perfectly matched with the XR10-Justock ESC for all zero timing spec racing and also compatible with other Hobbywing Electronic Speed Controllers including other brands.
- This Justock motor is applicable to various 1/10th, 1/12th on-road & off-road vehicles. It can be an ideal choice for Stock or Sport class races but can also be a nice choice for newbies for practice.
- The motor design is in compliance with IFMAR, and ROAR specifications.

Features:
SPEC
Input : AC 100~240V @ Max 25W
Output : DC13.1V @ Max 2.2A
Battery type : LiPo / LiHV @ 2~3S
Balance current : 200mA @ 4.20V
Charging accuracy : <0.01V @4.20V
Product size 91x 58 x 30mm
Product weight : 100g

Introducing the Hobbywing QuicRun 16BL30 G2 Waterproof brushless speed control.

Intelligent Freewheeling for Lower Heat and Enhanced Performance
The ESC features intelligent freewheeling technology, delivering higher drive efficiency, lower operating temperatures, improved stability, and greater reliability.

Compact Size for Easier Installation and Flexible Layout
Compared to the previous generation 16BL30 ESC, the G2 ESC is significantly smaller: 8.3% shorter in length, 7.1% narrower, and 16.7% lower in height. This design is compact and makes installation easier and allows for cleaner wiring on the chassis.

BEC Upgrade Compared to the G1 ESC
The BEC’s continuous current has been upgraded from 1A to 2A.
A peak current of up to 4A
The output voltage can be switched between 6V and 7.4V.

Easily powering high-torque and high-voltage servos. This provides faster response and more precise control.

High Protection Rating
IP67-rated protection allows it to easily handle harsh environments such as rain, sand, and muddy roads, ensuring reliable performance without environmental limitations.

Note: The IP67 protection rating described above applies under normal usage conditions, providing splash resistance, water resistance, and dust resistance, as tested under controlled laboratory conditions. These protective features are not permanent, and protection performance may degrade over time due to regular wear and aging. Do not submerge the product in water for extended periods, as this may cause damage.

Multiple Programming Methods
Supports three programming methods: LCD Program Box Pro, LED Program Box, and SET button, allowing users to conveniently select their preferred programming method for parameter adjustments.

Exceptional Value for Money
Specifically designed for entry-level users, with HOBBYWING’s exceptional quality. Easy to operate and beginner-friendly, with no complex setup required.

Perfect Match for QuicRun 2030 G2/2435 G3 Motors
The ESC offers excellent compatibility when paired with QuicRun 2030 G2/2435 G3 motors, delivering smoother control.

Wide Compatibility
The power system is suitable for both 1/16th & 1/18th scale hobby vehicles.

Specifications

Type
Scale - 1/16th, 1/18th
Brushed/Brushless - BL
Sensored/Sensorless - SL
Waterproof - Yes

Specifications
Cont./Peak Current - 30A/100A
Input Voltage - 2-3S LiPo
BEC Output - 6V/7.4V@2A

Cables and Plugs
Power Cord - Black-16AWG-75mm*1,Red-16AWG-75mm*1
Output Line - Black-16AWG-60mm*3
Power Plug - XT60
Output Plug - 3.5MM gold female plug

ESC Programing via
SET Button on ESC - Supported
LED Program Box - Supported
LCD G2 Program Box - Supported
OTA Programmer - Not Supported
Program Port - Shared with Throttle Wire

Data Recording
Extreme value records - Not Supported
Real-time Data - Not Supported
Historical Data (line graph) - Not Supported

Firmware
Firmware Upgrade - Not Supported

Size & Weight
Size - 33.4*26.8*15.1mm
Weight - 38.5g( Included wires & connectors)

Applications
Supported motor types - Sensorless brushless motor, sensored brushless motor (only works in sensorless mode)
Applicable models - 1/16th、1/18th On-Road & Off-Road
Applicable motor - QUICRUN 2435 G2

Sold working as seen. 

only been raced indoors. 

comes with:

- Reedy Brushless system 

- Uprated servo

- Spare oarts

- Orginal wheels and tyres plus carpet Schumacher yellow compound wheel and tyres 

- Original box and manual 

 

requires a 2channel radio, a 7.4v standard or shorty Lipo and appropriate charger. 

RRP with optional tyres and spares would total over £300 new. Less a radio value of around £35.00. 

 

Sold as seen. 

Only ever raced here at our raceway. 

comes with new items installed.

New - Gen’s Ave shortly 4000mah battery 2S
New - Core 21 Brushed Motor

New - Hobbywing 1060 2S ESC 

Fan mounted 

Etronix Digital Servo ET2047 

Box of spares 

Spares wheels and tires 

Sway bar fitted 

Sold as seen.

Appears to be in good working order. Front ball diff apparently. Signs of use underneath. The body has no cracks. 

BattCave JOK3R+ Mini Short A-Arms

Developed specifically for the BattCave JOK3R+, our new Short A-Arms form an important part of the revised JOK3R+ front suspension.

The shorter A-Arm design has been developed to help give the JOK3R+ its easier, more forgiving driving characteristics, while retaining the precise and responsive front-end feel expected from the JOK3R platform.

Produced using our revised high-performance material, the new Short A-Arms offer increased strength and improved impact resistance, helping to make the JOK3R+ front end more durable without compromising precision or performance.

Each pair is also supplied with our new Front Steering Rubber Limiters. These act as impact absorbers, helping to dissipate heavy impacts through the front suspension and protect the surrounding components, further improving front-end durability.

Caster and camber geometry is built directly into each A-Arm, allowing racers to quickly change the front-end characteristics of the car and fine-tune the setup for different track conditions and driving styles.

Available Geometries

🦇 2+0 – JKR-3A20-S

🦇 2+1 – JKR-3A21-S

🦇 4+0 – JKR-3A40-S

🦇 4+1 – JKR-3A41-S

🦇 7+0 – JKR-3A70-S

🦇 7+1 – JKR-3A71-S

Key Features

🦇 New Short A-Arm Geometry – developed specifically for the revised JOK3R+ front suspension.

🦇 Easier, More Forgiving Handling – the revised suspension geometry contributes to the more accessible and confidence-inspiring driving characteristics of the JOK3R+.

🦇 Revised High-Performance Material – increased strength and improved impact resistance for greater front-end durability.

🦇 Front Steering Rubber Limiters Included – act as impact absorbers to help dissipate heavy impacts and protect surrounding front-end components.

🦇 Six Geometry Options – choose from 2+0, 2+1, 4+0, 4+1, 7+0 and 7+1 to fine-tune your front-end setup.

🦇 Built-In Geometry – caster and camber settings are incorporated directly into the A-Arms, making setup changes quick and repeatable.

🦇 Precision 3D Printed – designed and manufactured in-house using our proprietary 3D printing methods.

🦇 Sold in Pairs – supplied as one matched pair of Short A-Arms, complete with Front Steering Rubber Limiters.

🦇 JOK3R+ Specific – designed exclusively for the BattCave JOK3R+ Mini competition chassis.

Sold as seen - old stock of rock crawler tyres 

Dirt Tread 

 

wheels not included. Wheel size is approx 43cm but could be smaller or larger to fit. Approx 27mm wide but could be thinner or wider and still fit 

Features:
*Designed to hold touring car, drift car, M car, tires, tool box and the items you need
(Some drift car body may be too long or too wide to fit. Please check the bag specification below. The width is around 185mm.)
*Excellent to hold 1/10 touring car, drift car & M car on the top layer
*Tool box, battery packs, tires & other accessories can be stored at the bottom
*An corrugated plastic box included to protect items inside
*2 side pockets to hold additional tools, glue or hardware
*Adjustable shoulder strap included
*Made In Taiwan

*Cars, parts, accessories & others are not included.*

Please notice the bag is flexible. Dimensions below is for your reference.
The actual size can be larger.

Size: W × D × H – 520 × 220 × 300 mm (outside)
Size: W × D × H – 470 × 185 × 260 mm (inside)
Plastic Box Inner Size: 470 x 260mm x H185 mm

**The scale (1/10, 1/8..etc.) or category (buggy, truck..etc.) shown above is for reference only. It doesn’t mean all of them can fit. Please check the size and specification shown above or in photos before purchasing.**

Sold as seen

Sold as seen

Sold as seen 

Sold as seen, appears to have no real cracks and have untested lights fitted 

As seen 

Sold as seen

GOAT is ZooRacing´s new high-performance touring car body. Developed from the experience from the super successful Dogsbollox body, but a more compact and shorter design to generate more rotating for a more fluent driving.

Key areas, like the new, shorter nose- and hood design are optimized and the also the rear section is more compact and much lower to make cornering faster and have a stable rear at the same time.

 

The new and more pronounced rear spoiler generates more downforce, what gives the car more stabillity when exit corners. The more homogeneous airflow behind the roof reduces drag and turbulences. New inverted fin design on the trunk reduces turbulences and increases static stability at the rear section and results a better approach flow to the new curved designed rear wing.

 

The rear wing design is curved according the body lines and has a stepped design to improve stability. The result is less flex and more downforce on high speeds.

 

The handling of the GOAT body is less agressive, than the Wolverine and rotates better, than the Dogsbollox and produces a well ballanced side bite. Perfect for tracks with low to medium grip and modified racing. The GOAT is Great On All Terrains!

 

On top of that all is the ZOOlite moulding process that reduces the overall weight of our standard thickness 0.7mm body shells by about 10g. This ensures the standard shells are legal for all races with minimum body weight rules, while significantly lowering the overall center of gravity. In addition, GOAT is also available in our proven, Ultralight 0.5mm variant for everyone looking for the outmost of performance. 

With the GOAT, ZooRacing introduces the new 0.4mm AIRlite material. This ist he lightest material by far we ever made for touring car bodies. We recommend this material only for super high grip trackst to reduce tractions rolls and/or tire waste. AIRlite material bodies are mostly faster, but the lifetime of the body is definitely limmited.

 

Part of the package is a window mask decal set and a high-quality wing mounting hardware and a detailed sticker sheet including grille, head and taillights.

 

Features:

- CAD designed - Specialized LCG body shell with a more realistic design and less aerodynamic drag - Low, and yet realistic front end with sculptured hood and grille details - Updated Dogsbollox-style roof section for less aerodynamic drag and higher cornering speeds - Recessed roof to channel the airflow and to create greatly improved structural stability thanks to static reinforcement - Structured rear end for anti-tuck capabilities - Large wheel arches allow the body to be placed 4mm front or back (8mm in total) - Large wheel arches ensure the tires will not rub in whatever position - Anti-tuck capabilities with structured side skirts - Static reinforcement on the hood. Especially useful when running the ultra lightweight variant

- ZOOlite 0.7mm standard body weighs in at about 75g cut & including wing - 0.5mm body weighs in at about 55g cut & including wing

- AIRlite 0.4mm weighs in at about 45g cut & including wing - Detailed decal sheet - Window masks - Wing mounting hardware - 100mm grid on the rear truck lid for easy and convenient body mounting - Designed to meet GBS rules

 

Supports all ORCA “OE” ESC’s;

• OE1
• OE101
• OE101S
• OE1-1S
• OE1-1S Mk2 Pro
• OE1 Mk2 Pro
• OE1 WLEB
• OE1.2
• TOTEM 1S
• TOTEM 2S

Does NOT work with “RunPlus” or “800 Series” speed controllers

Manufacturer	Bitty Design
Part Number	BD-GT-190AGT
EAN	744790836646
Decal Sheet	Yes
Class	190mm On-Road
Scale	1:10
Bodyshell Finish	Un-Painted
Wheelbase	257mm (10.11 Inch)
Body Material	Polycarbonate
Window Masks	Yes

The AGATA project was born from the desire to offer to the rc enthusiast all over the world a body shell that could recall our origins, Emilia land of engines and dream car manufacturers.

Tested over several months on different carpets and asphalts, the body is a new alternative for drivers who not only aim for pure performance but also seek an aesthetic satisfaction fully satisfied by the unique shapes and lines of AGATA.

The AGATA project represents the highest level in the RC industry in terms of development and engineering. We haven't set any limit and with the help of expert team of engineers we have developed a brand new product that features amazing details in terms aesthetic and aerodynamic. 

A parternship with Italian leading CNC factory allowed to obtain the maximum level of precision and quality possible today; we are proud supporters of the real Made in Italybased on the creation, passion and pure innovation.

The design recalls the shapes of the dream-car produced in Emilia, the phase of refinement took several months to optimize every detail, the search of perfection has been obsessive in order to propose a body that could honor our Italian excellence.

AGATA is a GT body with a stunning look, the lowered front nose generates an excellent steering while the wide cab and the neutral sides stabilize the air flows that conveyed into the large rear wing make the model easy to drive, the body is well balanced and does not undermine the set-up of your car.

The body shell meet the specifications needed to participate in any 1/10 GT race in the world, USGT class included.

• Made with high quality and genuine polycarbonate Lexan®
• Included in the kit a complete set of screw, nuts and large plastic washers to fix properly the rear wing
• Front foam (laser cut) to avoid the vibration of the front nose of the body included into the kit
• Produced in Light Weight version, thickness of material 0,75mm
• Sold clear with protective film outside
• Included in the package a decal sheet pre-cut and windows mask

Manufacturer	Bitty Design
Part Number	BD-GT-190AGT
EAN	744790836646
Decal Sheet	Yes
Class	190mm On-Road
Scale	1:10
Bodyshell Finish	Un-Painted
Wheelbase	257mm (10.11 Inch)
Body Material	Polycarbonate
Window Masks	Yes

The AGATA project was born from the desire to offer to the rc enthusiast all over the world a body shell that could recall our origins, Emilia land of engines and dream car manufacturers.

Tested over several months on different carpets and asphalts, the body is a new alternative for drivers who not only aim for pure performance but also seek an aesthetic satisfaction fully satisfied by the unique shapes and lines of AGATA.

The AGATA project represents the highest level in the RC industry in terms of development and engineering. We haven't set any limit and with the help of expert team of engineers we have developed a brand new product that features amazing details in terms aesthetic and aerodynamic. 

A parternship with Italian leading CNC factory allowed to obtain the maximum level of precision and quality possible today; we are proud supporters of the real Made in Italybased on the creation, passion and pure innovation.

The design recalls the shapes of the dream-car produced in Emilia, the phase of refinement took several months to optimize every detail, the search of perfection has been obsessive in order to propose a body that could honor our Italian excellence.

AGATA is a GT body with a stunning look, the lowered front nose generates an excellent steering while the wide cab and the neutral sides stabilize the air flows that conveyed into the large rear wing make the model easy to drive, the body is well balanced and does not undermine the set-up of your car.

The body shell meet the specifications needed to participate in any 1/10 GT race in the world, USGT class included.

• Made with high quality and genuine polycarbonate Lexan®
• Included in the kit a complete set of screw, nuts and large plastic washers to fix properly the rear wing
• Front foam (laser cut) to avoid the vibration of the front nose of the body included into the kit
• Produced in Light Weight version, thickness of material 0,75mm
• Sold clear with protective film outside
• Included in the package a decal sheet pre-cut and windows mask

BD-GT-190AS1 Bittydesign ARES-1 1/10 GT Clear 190mm Body

Manufacturer	Bitty Design
Part Number	BD-GT-190AS1
EAN	785104942684
Window Masks	Yes
Decal Sheet	Yes
Class	190mm On-Road
Scale	1:10
Bodyshell Finish	Un-Painted
Wheelbase	257mm (10.11 Inch)
Body Material	Polycarbonate

ARES-1 is pure performance for the 1/10 GT class. Designed with the desire to create an unconventional body thanks to highly refined and extreme aerodynamic; ARES-1 moves the performance bar to a new level.

QUALITY without any compromise is the basis of everything we make, the ARES-1 body shell represents the perfect implementation of our philosophy that drives us to do better and that encourages us to make use of our know-how acquired in over 17 years of experience.

To achieve maximum performance, we tested the body several times and made radical changes to the original design, we wanted to make sure we could offer an absolute performance product that would become the new benchmark for the GT category.

The aerodynamics of the ARES-1 will surprise you because during development we put all our experience into it and optimised every detail with the focus on maximum performance. The ease with which this body will allow you to 'push' your limits will leave you speechless every time you use it on your model.

Features:

The body shell is UNIVERSAL and mounts on all 1/10 190mm models, the wing complies with the measures as per USGT regulation and can therefore be used at any race.

• Made with high quality and genuine polycarbonate Lexan®
• Included in the kit a complete set of screw, nuts and large plastic washers to fix properly the rear wing
• Produced only in Light Weight version
• Fit all the 190mm electric chassis on the market with 257-260mm wheelbase
• Sold clear with protective film outside
• Included in the package a decal sheet pre-cut and windows mask

 

The bodyshell is supplied clear as part of a molding and will require cutting and painting in order to complete.

Torque(6.0V): 13.5 kg-cm ( 187.5 oz/in)
Torque(7.4V): 16.5 kg-cm ( 229.1 oz/in)
Torque(8.4V): 18.0 kg-cm ( 250.0 oz/in)
Speed: 0.10 sec (6.0V) ¦ 0.095 sec (7.4V) ¦
Speed: 0.085 sec (8.4V)
Operating Voltage: 6.0 ~ 8.4 DC Volts
Weight: 55.0 g (1.94 oz)
Bearing Type: Ball Bearing x 2
Motor Type: Coreless Motor
Gear Type: Titanium & Steel
Operating Temperature: -20~60°C
Working frequency: 1520µs / 333hz
Size: 41.0 x 20.0 x 26.3 mm ( 1.61 x 0.79 x 1.04 in)