In-stock products

Assembly required! Use shock pliers and shock pump where possible! Comes with 300cst oil.

Description:

This is a Yeah Racing newly designed damper set for 1/10 RC cars. Despite the 5 stage stiffness spring sets, Yeah racing damper set featured the state of the art technology interchangeable damper piston which gives so much serious tuner so much potential to tune their damper settings. The interchangeable piston will allow 3 settings of damper's response as well as 4 rebound rate adjustment to fit different racing situation and maximum performance.

The Yeah Racing new damper set has spent great effort on increasing the durability and maintenance ease. The damper shaft is coated with titanium for minimizing friction and longer lifespan. To cope with the need to change the damper piston from time to time, the shock gear have selected premium quality anti-leak O-Ring to keep the damper oil in place. CNC machined high grade aluminum were used to build this high end damper set for maximum durability at the minimum weight.

Rebound Core System:

The Yeah Racing Aluminum damper set comes with 6 different damper piston for fine-tuning the rebound characteristics. The set of 3 general type piston allow you to adjust 3 different rebound rate where has the same depression and compression resistant. While the "V piston" featured a v shape damper oil tunnel which allows the depression rate differ from the compression rate for more precise tuning. For instance, a rear wheel drive RC can be benefit by a stiffer rear wheel compression rate to offset the weight transfer during hard acceleration while maintaining balanced depression rate throughout the whole car.

Feature:

• For: 1/10 RC Cars
• Material: Aluminum
• Color: Blue
• CNC Machined
• Titanium Coated Damper Shafts
• Selected Anti-Leak O-Ring
• Unique Piston Design
• Rebound Core System
• Aluminum Damper Cylinder
• Easy To Refill Damper Oil
• Simple Installation

Specification:

• 50mm Hole to Hole

Include:

• • Shock-Gear (4 pcs)
  • Piston 2 Holes (4 pcs)
  • Piston 3 Holes (4 pcs)
  • Piston 4 Holes (4 pcs)
  • V Piston 2 Holes (4 pcs)
  • V Piston 3 Holes (4 pcs)
  • V Piston 4 Holes (4 pcs)
  • Spring Red (Super Soft) (4 pcs)
  • Spring Yellow (Soft) (4 pcs)
  • Spring Blue (Medium) (4 pcs)
  • Spring White (Hard) (4 pcs)
  • Spring Black (Super Hard) (4 pcs)
  • Ball End (8 pcs)
  • Ball Nut (4 pcs)
  • Shock Oil 300CST 15ml (1 pc)
  • Manual (1 pc)

• Using 38 shore foam and adding a purple stripe to recognize the compound, mounting it on our rim black 1/12 black carbon rim the tyres perform excellently.  These tyres are suitable for high grip American style tracks and work with the most popular additives.
  43mm diameter from the box.

Now used on the BRCA 1/12th LMGT3 1/12 Class for either GT12 Atom or Eclipse LMP12

Introducing from CORE RC the New 727 Medium Side Wall Glue + 2 Nozzles.

Especially developed by Schumacher's leading drivers together with industry glue experts this CORE RC 727 Medium Side Wall Glue is primarily designed to tune car handling by using on tyre sidewalls.

Medium viscosity

Because of the medium viscosity it can not only be used for stiffening tyre sidewalls it can also be used for regular tyre gluing.  For those who prefer the slower thicker application method, which could cause less mess.

We suggest for Off Road tyre sidewall gluing to re-use the bag supplied on the end of your finger to apply a small amount to the area required.  Alternatively use a silicone thimble.

20g bottle with special non stick lid and 2 ultra fine plastic nozzles for accurate placement.

• Standard 540 can size for use in 1/10th scale or 1/12th scale vehicles.
  - Motors are designed for use with 4 cell or 6 cell Nimh packs, or 1s or 2s lipo packs.
  - Supplied with leads for easy connection in RTR cars.
  - Includes internal cooling fan.

Great replacement for Tamiya TT01 & TT02 etc

Frosty Tip - After weeks of testing, and asking other pro drivers. We have found this to be the best product for the TT01E Euro Race Truck on Carpet.

SXT 3.0 was designed to provide superior performance in a minimum odour environment for both foam and rubber tyre racing. It has been engineered, tested and proven to be compatible with other additives. No worries about setup changes when switching compounds as SXT 3.0 provides the same on-track feel and performance as other additives. Another benefit we have noticed during the year is the ability to rejuvenate old foam tyres. In our tests we have taken 1 or 2 year old tyres and soaked them a couple times with SXT 3.0 and they tend to come back to "like new". Simply run them once and you have race ready tyres that you usually would have tossed away!

Carpet Foam and Rubber Tyre: Apply SXT 3.0 to clean tyres. Typically the entire rear tyres and a portion of the front tyres (starting at the inside edge) are coated, depending on traction conditions. Soak time before wiping is also dictated by traction conditions; longer soak = higher traction. Start by soaking the tyres for 15 minutes, timing it so that you wipe them 10 minutes before racing. Asphalt Foam: Apply SXT 3.0 to tires. Typically the entire rear tyres and a portion of the front tyres (starting at the inside edge) are coated, depending on traction conditions. Soak the tires for 20 to 30 minutes, timing it so that you wipe them 10 minutes before racing. Shorten soaking time if track is high bite.

Approx. 110 ml.

This is classed as a hazardous material by our shippers and consequently cannot be sent outside the UK.

Supastox GT12 Circuit and Oval pre glued tyres line. Contact RC has put in a great deal of development time to provide the best tyre balance and traction. With help from our drivers Ben Harding, World Champion in the Stock oval class and 2013 BRCA GT12 Champion Chris Ashton.

Contact GT12 tyres come pre glued on Bearing (B/B) and no Bearing rims (std).

01/01/2023

Now include cool looking disks are glued by the customer on the external face of the wheel to protect the foam from the high rigours of oval racing.

The disk will help prevent tyre chunking on side impacts.

They are included in all JM tyres.

FITS ON MOST 1/10 CAR AND IS FOUND TO BE THE ONLY FAN HEATSINK UNIT TO FIT THE TAMIYA TT01E EURO TRUCK.  FIT AND TILD IT AT 120DEG FOR FITMENT.

• Using 38 shore foam and adding a purple stripe to recognize the compound, mounting it on our rim black 1/12 black carbon rim the tyres perform excellently.  These tyres are suitable for high grip American style tracks and work with the most popular additives.  
  43mm diameter from the box.

Now used on the BRCA 1/12th LMGT3 1/12 Class for either GT12 Atom or Eclipse LMP12

1X XT60 MALE PLUGS REQUIRED FOR CHARGE LEADS - NOT INCLUDED

Perfect Charger for a 7.2v Nicd/NiMh or 7.4V Lipo and more!

Infused with SKYs latest 'neo' technology for enhanced efficiency and power, S100neo is masterfully engineered to offer a highly focused and remarkably efficient charging experience, yet it remains power-packed.
With dual power input, S100neo effortlessly provides up to 100W from an AC source and excels with a potent 200W output on a de facto standard XT60 DC plug for RC hobbyists.
This versatility ensures that S100neo meets a wide range of charging demands, whether at your pit table or in the field.

Size and Weight
Case Material: Plastic
Case Size: 105*105*62mm
Weight: 340g

Display
Display Type: TN
Size: 1.77 inch
Panel Active Area: 28.03*35.04mm
Resolution: 128x160 Pixel
Number of Colors: 262K

Power
DC Input Voltage: 10-30V
AC Input Voltage : 100-240V

Charger power:
DC Input Voltage: 6-30V
AC Input Voltage: 100-240V 50/60Hz

Discharge power:
Max. 20W based on 6S(4.2V/S)

Battery
LiPo/LiHV/LiFe/LiIon: 1-6cells
NiMH/NiCd: 1-15cells
Pb: 3S/6S/12S

Charge and Discharge
Charge current
LiPo/LiFe/LiIon/LiHV/NiMH/NiCd/Pb：0.1-12.0A

Discharge current
LiPo/LiFe/LiIon/LiHV/NiMH/NiCd/Pb：0.1-2.0A

Balance current
LiPo/LiFe/LiIon/LiHV：Max. 1000mA

Operation
LiPo/LiFe/LiIon/LiHV: Balance charging, Charging, Discharging, Storage
NiMH/NiCd: Charge, Discharge, Cycle charge-discharge, Cycle discharge-charge, Repeat charge
Pb: Normal, Standard charge, Low-temperature charge, AGM charge/discharge

• Description

  Features:
  1. Two gradually adjustable, fully-proportional channels
  2. Servo reverse (reverses the direction of travel) and trim function
  3. Trimming function for acceleration and steering
  4. Dual rate for both channels (travel limiting of the servos)
  5. Battery status display via LED
  6. Failsafe
  
  Technical data:
  • Operating voltage of the transmitter 4.8 – 6V
  • Powering of receiver (without BEC) 11 V possible
  • Uni connector system Futaba/Graupner-J/R

   

  4x AAA batteries sold separately 

The MTC (Mini Touring Car) Class has seen an explosion of interest in the last few years and we're happy to offer these tyres for the class.

A large amount of testing has gone into these tyres by some of the best MTC drivers in the UK.

The tyres are available in 4 shore ratings, 35, 37, 40 and 45 and are pre-glued on a very nice and durable 5 spoke wheel with 12mm hex fitting. 

Trued to 52.5mm diameter, with a width of 25.5mm, supplied in pairs

This will remove all X and XF paint, AS and TS spray paints, PC and PS Lexan colours and many other paint systems up to 2-component paints. These paints are removed without attacking the substrate such as plastic, Lexan, Resin, metal or model glazings. Trials have shown that even 10-year-old tamiya colour can be effortlessly removed. Acrylic Paint paints from tanks, planes or similar models are all possible. This means that annoying paint misadventures from the past can be easily retouched. Of course, older polycarbonate paints can be removed as well.

NOT TO BE USED BY CHILDREN! MUST BE USED IN VENTED AREA - TOXIC AND FLAMABLE!

Introducing the Hobbywing 1/12th Brushed Speed Control for 1S LiPo or 4 Cell NiMh.

Note: To turn on and off, you must remove battery plug. Button is for ESC Programming only. ESC comes set as standard with no brakes. You must turn on brakes and changed from Zero brake force to min of 25% for them to work. Standard setup is for Banger cars for instant reverse.

A collaboration between Schumacher Racing and Hobbywing !

Easy Operation
This ESC is specially designed to be easy to use, it not only carries forward the outstanding quality of HOBBYWING products but is simple in operation.

High Reliability & Durability
Reliable hardware combined with advanced software technology allows the 1060 WP 1S Brushed to not only provide high power output but also overload protection of the ESC circuit.

Easy to Use
This ESC features auto throttle calibration and further settings can be adjusted using the LED Program Box HW30501003.

Wide Application
This ESC is designed for 1/12th Scale cars using 1S LiPo batteries or 4 Cell NiMH.

Applicable to All Weather Conditions
The waterproof and dust-proof design allows the 1060 WP Brushed to be used in all weather conditions without any issue of damage caused to the ESC from water or dust.

See image for factory default settings.

Instant reverse is a standard setting, highly suitable for 1/12th Stock Car class.

Specifications

Current Rating - 60A
Input Voltage - 1S LiPo or 4 Cell NiMh
Motor - Brushed Motors： ≥15T
Applications - 1/12th Racing
BEC Output - 6V，3A
Parameter Setting Method - LED Program Box HW30501003
Connectors - T Plug & 4mm Bullets.

The Voltz Lipo Locker is intended to reduce and minimise the chances of damage in the event of a LiPo battery fire.

Wise up and use LiPo protection. The alternatives are not worth thinking about.

Dimensions: 18.5cm x 7.5cm x 6cm.

Introducing from CORE RC the New 727 Medium Side Wall Glue + 2 Nozzles.

Especially developed by Schumacher's leading drivers together with industry glue experts this CORE RC 727 Medium Side Wall Glue is primarily designed to tune car handling by using on tyre sidewalls.

Medium viscosity, compared to our thinner cr522 tyre glue. 

Because of the medium viscosity it can not only be used for stiffening tyre sidewalls it can also be used for regular tyre gluing.  For those who prefer the slower thicker application method, which could cause less mess.

We suggest for Off Road tyre sidewall gluing to re-use the bag supplied on the end of your finger to apply a small amount to the area required.  Alternatively use a silicone thimble.

20g bottle with special non stick lid and 2 ultra fine plastic nozzles for accurate placement.

The MTC (Mini Touring Car) Class has seen an explosion of interest in the last few years and we're happy to offer these tyres for the class.

A large amount of testing has gone into these tyres by some of the best MTC drivers in the UK.

The tyres are available in 4 shore ratings, 35, 37, 40 and 45 and are pre-glued on a very nice and durable 5 spoke wheel with 12mm hex fitting. 

Trued to 52.5mm diameter, with a width of 25.5mm, supplied in pairs

Supastox GT12 Circuit and Oval pre glued tyres line. Contact RC has put in a great deal of development time to provide the best tyre balance and traction. With help from our drivers Ben Harding, World Champion in the Stock oval class and 2013 BRCA GT12 Champion Chris Ashton.

01/01/2023

Now include cool looking disks are glued by the customer on the external face of the wheel to protect the foam from the high rigours of oval racing.

The disk will help prevent tyre chunking on side impacts.

They are included in all JM tyres.